Effect of Disinfection Protocols on Bacterial Reduction in Mandibular Molars.

OBJECTIVE: Evaluate the bacterial reduction effect of disinfection protocols used in lower molars infected by Enterococcus faecalis. METHODS: Eighty extracted lower molars were prepared and inoculated with E. faecalis for 2 months. The teeth were then distributed into 2 control groups (n = 4) and 4 experimental groups (n = 18) in function of the disinfection protocol utilized: G1. WaveOne Gold (WOG), passive ultrasonic irrigation (PUI) and Ultracal; G2. WOG, PUI and calcium hydroxide (CH); G3. WOG, XP-Endo Finisher (XPF) and Ultracal; G4. WOG, XPF and CH. Bacteriological samples were collected previously (S1), after preparation (S2), final agitation (S3) and intracanal dressing (S4). Microbial growth was assessed according to culture turbidity and UV spectrophotometry. Statistical analyses used the Friedman test for paired samples and Kruskal-Wallis test for non-paired data (p<0.05). RESULTS: No protocol eliminated E. faecalis effectively. The S2, S3 and S4 samples were statistically different from the S1 samples in G1, G2, G3 and G4 (p<0.05). Statistical differences were observed in bacterial reduction between G1 and G2 and G1 and G3 after the intracanal medicament (S4) (p<0.05). CONCLUSION: The WOG + PUI + CH disinfection protocol showed higher percentages of bacterial reduction.

Does radiotherapy treatment alter the pulp condition in patients with head and neck cancer? A systematic review.

The main purpose of this study was to answer the question: "Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?" Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods.

Does irradiation of the tooth structure interfere with oxygen saturation measured by pulse oximetry?-An ex vivo laboratorial study.

The effect of tooth structure subjected to ionising radiation on oxygen saturation levels (SpO2 ) measured by pulse oximetry was investigated. Fifty-four extracted human third molars were sectioned mesiodistally. Pulse oximeter diodes were placed in prefabricated silicone moulds, secured on a vise with tooth surfaces placed between the diodes and the participant's finger, and SpO2 levels were measured. After that, the tooth surfaces were subjected to ionising radiation in fractionated doses of up to 70 Gy, and SpO2 was measured according to the protocol described. The Kolmogorov-Smirnov test was used for the analysis of normality of the quantitative variables, and Student's t-test compared mean SpO2 levels before and after irradiation. Mean SpO2 after irradiation was 94.6 ± 0.9%, without a statistically significant difference from SpO2 before irradiation, which was 94.7 ± 0.6%. Irradiation of the tooth structure did not interfere with SpO2 levels measured by pulse oximetry.

Does radiotherapy treatment alter the pulp condition in patients with head and neck cancer? A systematic review

Abstract The main purpose of this study was to answer the question: "Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?" Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods.

Cyclic Fatigue and Torsional Strength of a New Thermally Treated Reciprocating System.

OBJECTIVE: This study evaluated the resistance to cyclic fatigue and the torsional strength of Prima One Gold® and WaveOne Gold® reciprocating systems. METHODS: Cyclic fatigue was tested in an artificial canal with 60º curvature, a 5 mm radius of curvature at 22°C (n=10) and 36.5°C (n=10). The torsional strength test followed ISO 3630-1, measuring torque and deflection angle until fracture (n=10). The t-test was used to compare the two groups, and the significance level was set at 5%. RESULTS: The Prima One Gold group presented greater resistance to cyclic fatigue at room temperature (P=0.001) and body temperature (P<0.001). For the torsional resistance test, the Prima One Gold group had a lower maximum torque value (P=0.029), despite having a greater deflection angle (P<0.001). CONCLUSION: The Prima One Gold group showed greater resistance to cyclic fatigue regardless of temperature and a greater deflection angle. The WaveOne Gold group showed a greater maximum torque value than the Prima One Gold group.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software.

This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Late discolouration of root-treated teeth and subsequent restorative retreatment: three case reports.

Root-filled teeth that receive ceramic veneers may experience subsequent coronal discolouration, which will likely negatively affect the quality of life of patients and their relationship with the clinician. This manuscript describes three cases of this undesirable aesthetic consequence in anterior teeth of young patients and the subsequent restorative reintervention, with satisfactory results. In all three reports, the root canal filling was performed using cements containing bismuth oxide that likely disassociated into reduced metallic crystals when in contact with LED light. The discolouration observed after veneer cementation was most likely caused by the accumulation of these bismuth metallic crystals. These cases highlight the importance of preventing this undesirable complication, which may also result in the potential subsequent further sacrifice of sound coronal dental structure, and the role of recall in aesthetically demanding clinical cases.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures.

OBJECTIVES: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. MATERIALS AND METHODS: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. RESULTS: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). CONCLUSIONS: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

Selamento de perfuração radicular associado a enxerto de tecido conjuntivo em área estética: relato de caso / Sealing of root perforation associated with connective tissue graft in aesthetic area: Case report

Introdução: Perfuração radicular é a comunicação entre as paredes do canal radicular e o espaço periodontal. O tempo, a localização e a dimensão da perfuração são fatores que afetam no prognóstico do dente. Objetivo: Relatar um caso clínico de tratamento de perfuração radicular supraóssea associado a enxertia de tecido conjuntivo em área estética. Relato do caso: Paciente relatou ter sido submetido, há 3 meses, ao tratamento endodôntico do dente #22; porém, esse não foi finalizado. Ao exame clínico, o dente apresentava ausência de dor e presença de fístula na região da gengiva inserida. As imagens radiográficas e tomográficas revelaram imagem sugestiva de perfuração radicular na região vestibular do dente #22, além de área hipodensa/radiolúcida circunscrita ao ápice radicular, conduzindo ao diagnóstico de periodontite apical assintomática associada a perfuração radicular supraóssea. Inicialmente, foi realizado preparo do canal radicular e utilizada medicação intracanal por 21 dias. Posteriormente, foi realizada a obturação do canal radicular e restauração definitiva em resina composta na face palatal. Na mesma sessão, foi realizado o acesso cirúrgico para selamento da perfuração com resina composta, associado a enxertia de tecido conjuntivo no dente #22, para evitar recessão tecidual marginal. Foi observada, após 12 meses, neoformação óssea na região periapical do dente #22, com ausência de dor e preservação da estética na região periodontal. Conclusão: O diagnóstico e o planejamento multidisciplinar são fatores importantes no tratamento de perfurações radiculares, assim como a correta escolha do material selador (AU).

Introduction: Root perforation is the communication between the walls of the root canal and the periodontal space. The time, location and size of the perforation are factors that affect the prognosis of the tooth. Objective: To report a clinical case of treatment of supraosseous root perforation associated with grafting of connective tissue in aesthetic area. Case report: Patient reported that 3 months had started root canal treatment of tooth 22, but was not finalized. At the clinical examination, the tooth presented absence of pain and presence of sinus tract in the region of attached gingiva. Radiographic and tomographic images revealed an image suggestive of root perforation in the buccal region of tooth 22, as well as a hypodense / radiolucent area circumscribed to the root apex, leading to the diagnosis of asymptomatic apical periodontitis associated with supraosseous root perforation. Initially, it were performed root canal preparation and intracanal medication. After 21 days, root canal obturation and composite restoration were performed on the palatal face. In the same session, the surgical access was made to sealing the perforation with composite resin, associated to the grafting of connective tissue in tooth 22, to avoid marginal tissue recession. It was observed after 12 months new bone formation in the periapical region of tooth 22, with absence of pain and preservation of aesthetics in the periodontal region. Conclusion: Multidisciplinary diagnosis and planning are important factors in the treatment of root perforations, as well as the correct selection of materials used to seal root perforations (AU).

Accuracy of periapical and panoramic radiography for detection of root morphologies: a comparative study.

Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Acessos endodônticos: o que todo endodontista deve saber / Endodontic accesses: what every endodontist should know

Introdução: Os acessos endodônticos minimamente invasivos (AEMI) surgiram com o intuito de, por meio da preservação de estrutura dentária, manter a resistência à fratura de dentes tratados endodonticamente. A partir do primeiro estudo, em 2010, vários trabalhos foram desenvolvidos buscando entender qual a influência dos AEMI na resistência à fratura de dentes tratados endodonticamente. No entanto, interferências coronárias causadas pelos AEMI poderiam prejudicar a realização dos procedimentos subsequentes à cavidade de acesso, como a localização, instrumentação, limpeza, descontaminação e obturação dos canais radiculares. Objetivo: Com base nessa premissa, a presente revisão teve como objetivo responder algumas perguntas para que o clínico entenda quais são as principais modalidades de AEMI, os impactos da sua abordagem no tratamento endodôntico e o verdadeiro papel do tratamento endodôntico na perda dos elementos dentários. Resultados: Considerando os dados disponíveis até o presente momento, faltam evidências robustas para apoiar a alegação de que os AEMIs preservem a resistência à fratura dos elementos tratados endodonticamente melhor do que nos dentes acessados de maneira tradicional. Além disso, cavidades de acesso minimamente invasivas podem interferir em outras etapas do tratamento endodôntico, podendo torná-lo imprevisível. Conclusão: Dessa forma, pode-se concluir que há uma falta de evidências que apoiem a utilização de cavidades de acesso minimamente invasivas na prática clínica de rotina e/ou no processo de formação de alunos de graduação e pós-graduação (AU).

Introduction: Minimally invasive access cavities emerged aiming to maintain the fracture resistance of endodontically treated teeth through the preservation of dental structure. Starting with the first study in 2010, several others were developed to evaluate the influence of minimally invasive access cavities in the fracture resistance of endodontically treated teeth. However, the coronal interference caused by those access cavities could impair the subsequent procedures of root canal treatment, such as the location, instrumentation, cleaning, disinfection and filling of the root canals. Objective: Based on this premise, the aim of the present review was to answer some questions so that the clinician knows the main modalities of minimally invasive access cavities, the impacts of this approach and the real role of endodontic treatment in the tooth loss. Results: Considering the available data, there is a lack of robust evidence in literature to support the claim that the minimally invasive access cavities preserve the fracture resistance of endodontically treated teeth better than the traditional one. In addition, these access cavities can interfere in other stages of endodontic treatment, making it unpredictable. Conclusion: Thus, it can be concluded that there is a lack of evidence to support the use of minimally invasive access cavities in routine clinical practice and/or in the process of training undergraduate and graduate students (AU).

Cone Beam Computed Tomography Assessment of the Volume of Dental Tissue Removed During Endodontic Access.

Introduction: The purpose of this study was to determine the volume of dental tissue removed during endodontic access preparation with cone-beam computed tomography (CBCT) comparing two different software. Methods and Materials: CBCT images of 20 teeth were obtained before and after endodontic access performed with spherical and conical diamond burs. The images were taken with i-CAT Precise system with 0.25 mm voxel size. Digital Imaging and Communications in Medicine (DICOM) images were loaded on two different software programs (Materialise® and InVersalius®), and a 3D reconstruction of the CBCT images was performed on both programs. The baseline volume (BV), and the final volume (FV) were obtained, and the lost tissue volume (LV) was calculated using the formula: LV=BV-FV. The t-test was used to compare initial and final volumes and also to compare the two programs, using a significance level of 5%. Results: The volumetric data calculated for the Materialise  and the InVesalius  programs were, respectively: BV-mean of 441.79±85.08 mm3 and 442.01±84.83 mm3; FV-mean of 426.75±83.88 mm3 and 426.94±83.75 mm3; LV-mean of 15.04±4.32 mm3 and 15.07±4.16 mm3. No statistically significant difference was found in the volumes calculated by either program for initial, final, or removed tissue (P>0.05). However, there was a significant difference between the BV and LV calculated on the same program (P<0.05). Conclusion: Our in vitro study showed that CBCT was able to determine the volume of dental tissue removed in the endodontic access preparation of extracted human teeth, regardless of the software program used.

Accuracy of periapical and panoramic radiography for detection of root morphologies: a comparative study

Abstract: Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review.

This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (µCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with µCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and µCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the µCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as µCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review

Abstract This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (μCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with μCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and μCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the μCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as μCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial.

OBJECTIVE: To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. MATERIALS AND METHODS: 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student's t-test (P<0.05). RESULTS: Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). CONCLUSIONS: Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial

Abstract Objective To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student's t-test (P<0.05). Results Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). Conclusions Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Root perforations: a review of diagnosis, prognosis and materials.

Root perforation results in the communication between root canal walls and periodontal space (external tooth surface). It is commonly caused by an operative procedural accident or pathological alteration (such as extensive dental caries, and external or internal inflammatory root resorption). Different factors may predispose to this communication, such as the presence of pulp stones, calcification, resorptions, tooth malposition (unusual inclination in the arch, tipping or rotation), an extra-coronal restoration or intracanal posts. The diagnosis of dental pulp and/or periapical tissue previous to root perforation is an important predictor of prognosis (including such issues as clinically healthy pulp, inflamed or infected pulp, primary or secondary infection, and presence or absence of intracanal post). Clinical and imaging exams are necessary to identify root perforation. Cone-beam computed tomography constitutes an important resource for the diagnosis and prognosis of this clinical condition. Clinical factors influencing the prognosis and healing of root perforations include its treatment timeline, extent and location. A small root perforation, sealed immediately and apical to the crest bone and epithelial attachment, presents with a better prognosis. The three most widely recommended materials to seal root perforations have been calcium hydroxide, mineral trioxide aggregate and calcium silicate cements. This review aimed to discuss contemporary therapeutic alternatives to treat root canal perforations. Accordingly, the essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.

Apical Surgery: Therapeutic Option for Endodontic Failure / Cirurgia Parendodôntica: Opção Terapêutica para o Insucesso Endodôntico

The aim of this study is present a surgical solution of the case of endodontic root canal failure caused by overfilling, with a history of endodontic retreatment and aesthetic rehabilitation with porcelain veneers. Patient C.F.P.L, 50 years old, female, was looking for treatment complaining of pain. Previous endodontic treatment was reported on tooth 11, and root canal retreatment after 6 months due to the persistence of painful symptomatology. Later, the patient carried out aesthetic rehabilitation with porcelain veneers, and approximately 6 months later the vitro pain related to the tooth 11 occurred again. Radiographic and tomographic images showed obturation of the root canal of the tooth 11 associated with diffuse hypodense area in the periapical region, with overextended endodontic material. The probable clinical diagnosis was symptomatic traumatic apical periodontitis, and apical surgery was proposed as treatment plan. After infiltrative anesthesia, a Newmann incision and split flap were performed, followed by osteotomy with micro-chisel and curettage of the lesion. An apicectomy was performed with Zecrya drill, followed by retro cavity with diamond ultrasonic tip and retrograde obturation with white MTA. After 2 years of follow-up bone neoformation and absence of symptomatology were observed, tooth in function and preservation of aesthetic rehabilitation harmony. Apical surgery is a therapeutic alternative with favorable prognosis for the treatment of endodontic failure, provided that it is correctly indicated and with a wellexecuted surgical protocol. (AU).

O objetivo deste estudo é apresentar a resolução cirúrgica de um caso de insucesso endodôntico ocasionado pela sobre obturação do canal radicular, com histórico de retratamento endodôntico e reabilitação estética com facetas cerâmicas. Paciente C.F.P.L, 50 anos, gênero feminino, procurou atendimento odontológico queixando-se de dor. Foi relatado tratamento endodôntico prévio no dente 11, e retratamento do canal radicular após 6 meses devido à persistência de sintomatologia dolorosa. Posteriormente, a paciente passou por reabilitação estética com facetas cerâmicas e, aproximadamente 6 meses após, houve o reaparecimento de dor espontânea relacionada ao dente 11. As imagens radiográficas e tomográficas revelaram obturação do canal radicular do dente 11 associado à área hipodensa difusa na região periapical, com extravasamento de material obturador. O diagnóstico clínico provável foi de periodontite apical sintomática traumática, e plano de tratamento proposto uma cirurgia parendodôntica. Posterior a anestesia infiltrativa, realizou-se incisão do tipo Newmann e retalho dividido, seguido de osteotomia com micro cinzel e curetagen da lesão. A apicectomia foi realizada com broca Zecrya, seguida da confecção da retrocavidade com ponta ultrassônica diamantada e obturação retrógrada com MTA branco. Após 2 anos de proservação foi observada neoformação óssea e ausência de sintomatologia, dente em função e preservação da harmonia da reabilitação estética. A cirurgia parendodôntica é uma alternativa terapêutica com prognóstico favorável para o tratamento do insucesso endodôntico, desde que corretamente indicada e com protocolo cirúrgico bem executado. (AU).