Copper-Catalyzed Three-Component Synthesis of ß-Hydroxysulfides from Styrene Oxide, Aryl Iodide, and Carbon Disulfide.

A copper-catalyzed three-component coupling reaction of styrene oxide, aryl iodide, and carbon disulfide for the construction of ß-hydroxysulfides has been developed. In this process, readily available CS2 was used as the sulfur source to construct C-S bonds for the synthesis of phenyl-ß-hydroxysulfides and (benzo[d]thiazol)-ß-hydroxysulfides. This process features mild reaction conditions, simple operation, and wide substrate scope (>50 examples).

Photoselectively modulating main products by changing the wavelength of visible light over D-π-A-D conjugated polymers.

The diversity of catalytic products determines the difficulty of selective product modulation, which usually relies on adjusting the catalyst and reaction conditions to obtain different main products selectively. Herein, we synthesized D-π-A-D conjugated organic polymers (TH-COP) using cyclotriphosphonitrile, alkyne, 2H-benzimidazole, and sulfur units as electron donors, π bridges, electron acceptors, and electron donors, respectively. TH-COP exhibited excellent photoinduced carrier separation and redox ability under different visible light wavelengths, and the main products of its CO2 reduction are CH4 (1000.0 µmol g-1) and CO (837.0 µmol g-1) under 400-420 nm and 420-560 nm, respectively. In addition, TH-COP could completely convert phenylmethyl sulfide to methyl phenyl sulfone at 400-420 nm and diphenyl disulfide at 480-485 nm in yields up to 95 %. This study presents a novel strategy for the targeted fabrication of various main products using conjugated polymers by simply changing the wavelength range of visible light.

Accessing pyrrolo[1,2-a]indole derivatives via visible-light-induced dearomatizative cyclization of indoles.

Pyrrolo[1,2-a]indoles are structurally important scaffolds in many natural products and bioactive compounds. Herein, we report a novel synthetic method for pyrrolo[1,2-a]indole derivatives through visible-light-induced cascade dearomatizative cyclization of indoles with external nucleophiles. Moderate yields, good diastereoselectivities, and excellent regioselectivities were generally observed with the resultant indole-fused polycyclic compounds.

Copper-Catalyzed 1,2-Sulfonyletherification of 1,3-Dienes.

A selective three-component 1,2-sulfonyl etherification of aryl 1,3-dienes enabled by copper catalysis to afford biologically interesting alkenyl 1,2-sulfone ether derivatives through C-S and C-O bond formation is described. The protocol proceeds with the sulfonyl chloride and alcohols under simple, mild, and base-free conditions, providing a straightforward route to sulfonylated allyl ether compounds with broad functional group tolerance and excellent chemo- and regioselectivity. Mechanistic studies indicate that the selective alkene difunctionalization includes a key copper-mediated single-electron transfer process.

Accessing 3,4-Dihydroquinolinone from N-Arylacrylamides via Tetralone-Mediated Energy Transfer and 1,3-Hydrogen Shift.

Herein, we introduce a tetralone-mediated photocyclization method of N-arylacrylamides. The protocol proceeds smoothly to deliver a diverse set of 3,4-dihydroquinolinones in moderate to good yields with excellent functional group compatibility and readily allows for late-stage modifications of a number of complex drug molecules. Mechanistic studies reveal that the present systems with ultraviolet light irradiation enable the cyclization via energy transfer and exclusive 1,3-hydrogen shift.

Three-Component Cross-Electrophile 1,4-Alkylarylation of 1,3-Enynes by Merging Nickel and Photoredox Catalysis.

A three-component 1,4-alkylarylation of 1,3-enynes with organic halides through the combination of nickel and photoredox catalysis has been established, providing a novel and modular approach for the assembly of tetrasubstituted allenes. This reductive cascade cross-electrophile reaction obviates the need for air-sensitive organometallic reagents and stoichiometric metallic reductants. A diverse range of functional groups are very compatible under mild reaction conditions and give satisfactory yields. Moreover, a reasonable mechanism is presented according to a series of control experiments.

Redox-Neutral Cyclization of 2-Isocyanobiaryls through Photoredox/PPh3 Dual Catalysis.

The photoredox/PPh3-mediated cyclization of 2-isocyanobiaryls has been developed. A substantial range of functional-group-rich phenanthridine derivatives were synthesized at room temperature in a highly selective and atom-economic manner. Mechanistic studies suggested that the cyclization process is probably mediated both by Ph3P radical cation with key 1,2-hydride transfer and hydrogen atom generated through O-H bond homolytic cleavage of Ph3P-OH radical intermediate.

Regioselective Synthesis of Unsymmetrical Vicinal Diamines via Azidoimination of Alkenes with TMSN3 and Ketimines.

2-Azidoimines are versatile precursors to value-added vicinal unsymmetrical diamines, which are among the most common motifs in biologically active compounds. Herein, we report their operationally simple synthesis through a highly regioselective intermolecular azidoamination of olefins under metal-free conditions. The approach proceeded through azide and iminyl, two differentiated N-centered radicals. The synthetic potential of the protocols was further established via the condensation/amination sequential cascade and chemoselective, orthogonal transformations to access vicinal primary diamines.

Three-Component Ring-Expansion Reaction of Indoles Leading to Synthesis of Pyrrolo[2,3-c]quinolines.

Herein, we have developed an atom- and step-economic three-component cascade reaction that enables a modular platform for the synthesis of pyrrolo[2,3-c]quinoline compounds through ring-expansion/cyclization by way of novel N1-C2 cleavage of indoles. The metal-free catalytic system exhibits a broad functional group tolerance.

Three-Component Tandem Amidosulfenylation of Alkenes for the Synthesis of ß-Succinimide Sulfides.

An environmentally benign multicomponent strategy for the amidosulfenylation of alkenes for the synthesis of ß-succinimide sulfides is disclosed. In this process, common disulfides smoothly act as a sulfur-based source, and N-iodosuccinimide (NIS) is used not only as a free radical initiator but also as an N-nucleophile. A broad range of functional groups are tolerated in this reaction system.

Iodide-Dependent Selective Dehydroaromatization Affording Maleimide-Fused 9,10-Phenanthrenes and Their Analogues.

A novel and selective synthesis of polycyclic fused maleimides from easily available raw materials under metal-free conditions is presented. This cascade protocol involves self-condensation of cyclohexanones, followed by Diels-Alder reaction with maleimides, intramolecular dehydration, and selective dehydroaromatization in a one-pot fashion, affording maleimide-fused 9,10-phenanthrenes and their analogues in satisfactory yields. Notably, iodide reagents play a critical role in switching the selectivity toward full or partial dehydrogenation compounds.

Metal- and Solvent-Free Synthesis of Substituted Pyrimidines via an NH4I-Promoted Three-Component Tandem Reaction.

A facile and practical approach for the preparation of substituted pyrimidines from ketones, NH4OAc, and N,N-dimethylformamide dimethyl acetal has been described. This NH4I-promoted three-component tandem reaction affords a broad range of substituted pyrimidines in acceptable yields under metal- and solvent-free conditions. The present methodology features the advantages of simple and easily available starting materials, metal- and solvent-free conditions, a broad substrate scope with good functional group tolerance, and gram-scale synthesis.

Visible-Light-Induced Cascade Arylazidation of Activated Alkenes with Trimethylsilyl Azide.

A visible-light-induced cascade arylazidation of activated alkenes with trimethylsilyl azide (TMSN3) has been developed. Mechanistic investigations reveal that the single electron transfer (SET) of TMSN3 with the excited photocatalyst was involved in the initial step, followed by radical addition/aryl migration/desulfonylation to furnish valuable α-aryl-ß-azido amides and azidated oxindoles under mild conditions, which are versatile building blocks in organic synthesis. With simple treatment, the obtained arylazidated products were further converted to valuable ß-amino amide and 1,2,3-triazole derivatives.

Rhodium(III)-catalyzed mild and regioselective dearomative spirocyclization of 2-aryl-3-nitrosoindoles with alkynes.

Herein, we develop a Rh(III)-catalyzed intermolecular regioselective dearomative spirocyclization of 2-aryl-3-nitrosoindoles with alkynes, featuring the redox-neutral and atom-economic construction of spiroindoline-3-one oximes bearing a C2 spirocyclic quaternary carbon center under mild conditions. Both aryl alkyl alkynes and 1,3-diynes generally proceeded smoothly in the reaction with moderate to good regioselectivities. DFT calculations provided in-depth insights into the reaction mechanism and disclosed the origins of the regioselectivities.

Copper-Catalyzed Synthesis of 3-Aryl-9H-imidazo[1,5-a]indol-9-ones Using Oxygen as the Sole Oxidant.

A three-component strategy was developed for 3-phenyl-9H-imidazo[1,5-a]indol-9-one preparation from indole-2-carboxaldehydes, aromatic aldehydes, and ammonium acetate under copper catalysis conditions. In this process, a new five-membered ring was formed and the C3 position in the indole substrate was selectively oxidized into a ketone skeleton using oxygen as the sole oxidant and ammonium acetate as the nitrogen source. Furthermore, same products also could be achieved from indole-2-carboxaldehydes and benzyl amines under similar reaction conditions.

Visible-Light-Induced Stoichiometric Coupling of Alkylarenes and Trifluoromethyl Ketones.

A visible-light induced direct C(sp3)-H functionalization of alkylarenes with trifluoromethyl ketones has been reported to access valuable benzyl-substituted trifluoromethyl alcohols in a stoichiometric manner. Readily available petroleum-derived alkylarenes are employed as latent benzylation reagents. With a bromine radical as the hydrogen atom transfer reagent, primary, secondary, and tertiary benzyl C-H bonds are suitable coupling partners. Additionally, the late-stage modification of bioactive molecules highlights the potential application of this approach.

Site-Selective Radical Trifluoromethylaminoxylation of Olefins for the Modular Synthesis of Diverse ß-Trifluoromethyl Trisubstituted Hydroxylamines and Beyond.

A highly site-selective trifluoromethylaminoxylation of activated and unactivated olefins was reported under metal-free conditions. The method provides direct access to diverse ß-trifluoromethyl trisubstituted hydroxylamines, tertiary alcohols, isoxazolines, isoxazolidines, and amino alcohols. The SET process between hydroxylamine and the hypervalent iodine-CF3 reagent is proposed to produce two free radicals for the regio- and diastereoselective addition to alkenes. The synthetic potential of the protocol was established via the late-stage functionalization of the products and a series of postreaction modifications.

Brønsted Acid Promoted Facile Synthesis of Benzoacridines from Aromatic Aldehydes and N-Phenyl Naphthylamines.

A facile method for the rapid synthesis of benzoacridines has been described. This protocol promoted by p-toluenesulfonic acid starts from aromatic aldehydes and N-phenyl naphthylamines, affording a variety of benzoacridines in 30-90 % yields under metal-free conditions. The present approach involves a cascade of condensation, Friedel-Crafts alkylation, annulation and dehydroaromatization in one pot.

Recent advances in the synthesis of chiral α-tertiary amines via transition-metal catalysis.

The significance of chiral α-tertiary amines in medicinal chemistry and drug development has been unquestionably established in the last few decades. α-Tertiary amines are attractive structural motifs for natural products, bioactive molecules and pharmaceuticals and are preclinical candidates. Their syntheses have been the focus of intensive research, and the development of new methods has continued to attract more and more attention. In this review, we present the progress in the last decade in the development of synthetic methods for the assembly of chiral ATAs via transition-metal catalysis. To date, the effective approaches in this area could be categorized into three strategies: enantioselective direct and indirect Mannich addition to ketimines; umpolung asymmetric alkylation of imine derivatives; and asymmetric C-N cross-coupling of tertiary alkyl electrophiles. Several related developing strategies for the synthesis of ATAs, such as hydroamination of alkenes, HAT amination approaches and the C-C coupling of α-aminoalkyl fragments, are also described in this article. These strategies have emerged as attractive C-C and C-N bond-forming protocols for enantioselective construction of chiral α-tertiary amines, and to some extent are complementary to each other, showing the prospect of application in medicinal chemistry and chemical biology.

Radical-mediated photoredox hydroarylation with thiosulfonate.

Herein, we report a novel visible light-induced photocatalytic system that enables intramolecular hydroarylation of unactivated alkenes. Thiosulfonate compounds were found to be the key radical precursor that mediates the Minisci-type intramolecular cyclization reaction. Under the optimal reaction conditions, a wide range of pyridyquinazolinone and pyrroloquinazolinone products were obtained in moderate to good yields.