RESUMEN
Investigating proton transport at the interface in an excited state facilitates the mechanistic investigation and utilization of nanomaterials. However, there is a lack of suitable tools for in-situ and interfacial analysis. Here we addresses this gap by in-situ observing the proton transport of graphene quantum dots (GQDs) in an excited state through reduction of magnetic resonance relaxation time. Experimental results, utilizing 0.1 mT ultra-low-field nuclear magnetic resonance relaxometry compatible with a light source, reveal the light-induced proton dissociation and acidity of GQDs' microenvironment in the excited state (Hammett acidity function: -13.40). Theoretical calculations demonstrate significant acidity enhancement in -OH functionalized GQDs with light induction ( p K a * = -4.62, stronger than that of H2SO4). Simulations highlight the contributions of edge and phenolic -OH groups to proton dissociation. The light-induced superacidic microenvironment of GQDs benefits functionalization and improves the catalytic performances of GQDs. Importantly, this work advances the understanding of interfacial properties of light-induced sp2-sp3 carbon nanostructure and provides a valuable tool for exploring catalyst interfaces in photocatalysis.
RESUMEN
The limitations of two-dimensional (2D) graphene in broadband photodetector are overcome by integrating nitrogen (N) doping into three-dimensional (3D) structures within silicon (Si) via plasma-assisted chemical vapor deposition (PACVD) technology. This contributes to the construction of vertical Schottky heterojunction broad-spectrum photodetectors and applications in logic devices and image sensors. The natural nanoscale resonant cavity structure of 3D-graphene enhances photon capture efficiency, thereby increasing photocarrier generation. N-doping can fine-tune the electronic structure, advancing the Schottky barrier height and reducing dark current. The as-fabricated photodetector exhibits exceptional self-driven photoresponse, especially at 1550 nm, with an excellent photoresponsivity (79.6 A/W), specific detectivity (1013 Jones), and rapid response of 130 µs. Moreover, it enables logic circuits, high-resolution pattern image recognition, and broadband spectra recording across the visible to near-infrared range (400-1550 nm). This research will provide new views and technical support for the development and widespread application of high-performance semiconductor-based graphene broadband detectors.
RESUMEN
Graphene has achieved mass production via various preparative routes and demonstrated its uniqueness in many application fields for its intrinsically high electron mobility and thermal conductivity. However, graphene faces limitations in assembling macroscopic structures because of its hydrophobic property. Therefore, balancing high crystal quality and good aqueous dispersibility is of great importance in practical applications. Herein, we propose a tape-wrapping strategy to electrochemically fabricate water-dispersible graphene (w-Gr) with both excellent dispersibility (~4.5 mg/mL, stable over 2 months), and well-preserved crystalline structure. A large production rate (4.5 mg/min, six times faster than previous electrochemical methods), high yield (65.4% ≤5 atomic layers) and good processability are demonstrated. A mechanism investigation indicates that the rational design of anode configuration to ensure proper oxidation, deep exfoliation and unobstructed mass transfer is responsible for the high efficiency of this strategy. This simple yet efficient electrochemical method is expected to promote the scalable preparation and applications of graphene.
RESUMEN
A breakthrough in the performance of bionic optical structures will only be achieved if we can obtain an in-depth understanding of the synergy mechanisms operating in natural optical structures and find ways to imitate them. In this work, inspired by feline eyes, an optical substrate that takes advantage of a synergistic effect that occurs between resonant and reflective structures was designed. The synergistic effect between the reflective and resonant components leads to a Raman enhancement factor (EF) of 1.16 × 107, which is much greater than that achieved using the reflective/resonant cavities on their own. Finite-difference time-domain (FDTD) simulations and experimental results together confirm that the mechanism of this synergistic effect is achieved by realizing multiple reflections and repeated absorptions of light, generating a strong local electric field. Thus, a 2-3 order of magnitude increase in sensitivity could be achieved. More importantly, with the homemade centrifugal device, above optical substrates were further used to develop a rapidly highly sensitive household health monitoring system (detection time <3 min). It can thus be used to give early warning of acute diseases with high risk (e.g., acute myocardial infarction (AMI) and cerebral peduncle). Due to the good reusability and storability (9% and 8% reduction in EF after washing 30 times and 9 months of storage, respectively) of the substrates, the substrates thus reduce detection costs (to â¼$1), making them much cheaper to use than the current gold-standard methods (e.g., â¼$16 for gout detection).
Asunto(s)
Espectrometría Raman , Gatos , Animales , Humanos , Espectrometría Raman/métodos , Enfermedad CrónicaRESUMEN
Studying the phosphorescent mechanisms of carbon nanostructures synthesized by the "bottom-up" approach is key to understanding the structure modulation and the interfacial properties of carbon nanostructures. In this work, the relationships among symmetry of precursors in the "bottom-up" synthesis, structures of products, and phosphorescence lifetimes of graphene quantum dots (GQDs) are studied. The symmetry matching of precursors in the formation of a D6h graphene-like framework is considered the key factor in controlling the separability of sp2 domains in GQDs. As the separability of sp2 domains in GQDs increases, the phosphorescence lifetimes (14.8-125.5 ms) of GQDs in the solid state can be tuned. Machine learning is used to define the degree of disorder (S) of the GQD structure, which quantitatively describes the different space groups of precursors. The negative correlation between S and the oscillator strength of GQDs is uncovered. Therefore, S can be recognized as reflective of oscillator strength in the GQD structure. Finally, based on the correlations found between the structures and phosphorescence lifetimes of GQDs, GQDs with an ultralong phosphorescence lifetime (28.5 s) are obtained. Moreover, GQDs with visible phosphorescence emission (435-618 nm) are synthesized.
RESUMEN
A magnetic relaxation switch (MRS) that targets small molecules such as H2O2 is difficult to realize because of the small size of the targets, which cannot gather enough MRS probes to form aggregates and generate a difference in magnetic relaxation times. Therefore, the development of small molecule-targeted MRS is strongly dependent on changes in the interfacial structure of the probe, which modulates the proton transport behavior near the probe. Herein, functionalized graphene quantum dots (GQDs) consisting of GQDs with disulfide bonds, polyethylene glycol (PEG), and paramagnetic Gd3+ were used as the MRS probe to sense H2O2. The structure of GQDs changed after reacting with H2O2. The PEG assembled a tube for transmitting changes in GQDs via proton transport and thus enabled the magnetic relaxation response of the probe towards H2O2. Pentaethylene glycol was experimentally and theoretically proven to have the strongest ability to transport protons. Such a probe can be applied in the differentiation of healthy and senescent cells/tissues using in vitro fluorescent imaging and in vivo magnetic resonance imaging. This work provides a reliable solution for building a proton transport route, which not only enables the response of the MRS probe towards the targets but also demonstrates the design of carbon nanostructures with proton transport behaviors.
Asunto(s)
Grafito , Puntos Cuánticos , Protones , Grafito/química , Puntos Cuánticos/química , Peróxido de Hidrógeno , Imagen por Resonancia Magnética , Estrés OxidativoRESUMEN
The discovery of carbon-based quantum dots (CQDs) has allowed opportunities for fluorescence bioimaging, tumor diagnosis and treatment, and photo-/electro-catalysis. Nevertheless, in the existing reviews related to the "bottom-up" approaches, attention is mainly paid to the applications of CQDs but not the formation mechanism of CQDs, which mainly derived from the high complexities during the synthesis of CQDs. Among the various synthetic methods, using small molecules as "building blocks", the development of a "bottom-up" approach has promoted the structural design, modulation of the photoluminescence properties, and control of the interfacial properties of CQDs. On the other hand, many works have demonstrated the "building blocks"-dependent properties of CQDs. In this review, from one of the most important variables, the relationships among intrinsic properties of "building blocks" and photoluminescence properties of CQDs are summarized. The topology, chirality, and free radical process are selected as descriptors for the intrinsic properties of "building blocks". This review focuses on the induction and summary of recent research results from the "bottom-up" process. Moreover, several empirical rules pertaining thereto are also proposed.
RESUMEN
Contrast agents (CAs) in magnetic resonance imaging generally involve the dissociative Gd3+. Because of the limited ligancy of Gd3+, the balance between Gd3+ coordination stability (reducing the concentration of dissociative Gd3+) and increases in the number of coordination water molecules (enhancing the relaxivity) becomes crucial. Herein, the key factor of the synergistic effect between the O- and N-containing groups of graphene quantum dots for the structural design of CAs with both high relaxivity and low toxicity was obtained. The nitrogen-doped graphene quantum dots (NGQDs) with an O/N ratio of 0.4 were selected to construct high-relaxivity magnetic resonance imaging (MRI)-fluorescence dual-mode CAs. The coordination stability of Gd3+ can be increased through the synergetic coordination of O- and N-containing groups. The synergetic coordination of O- and N-containing groups can result in the short residency time of the water ligand and achieve high relaxivity. The resulting CAs (called NGQDs-Gd) exhibit a high relaxivity of 32.04 mM-1 s-1 at 114 µT. Meanwhile, the NGQDs-Gd also emit red fluorescence (614 nm), which can enable the MRI-fluorescence dual-mode imaging as the CAs. Moreover, the bio-toxicity and tumor-targeting behavior of NGQDs-Gd were also evaluated, and NGQDs-Gd show potential in MRI-fluorescence imaging in vivo.
Asunto(s)
Grafito , Puntos Cuánticos , Medios de Contraste/química , Grafito/química , Imagen por Resonancia Magnética/métodos , Nitrógeno/química , Oxígeno , Puntos Cuánticos/química , Agua/químicaRESUMEN
Three-dimensional graphene (3D-graphene) is used in surface-enhanced Raman spectroscopy (SERS) because of its plasmonic nanoresonator structure and good ability to interact with light. However, a thin (3-5 nm) layer of amorphous carbon (AC) inevitably appears as a template layer between the 3D-graphene and object substrate when the 3D-graphene layer is synthesized, weakening the enhancement factor. Herein, two-dimensional graphene (2D-graphene) is employed as a template layer to directly synthesize 3D-graphene on a germanium (Ge) substrate via plasma-assisted chemical vapor deposition, bypassing the formation of an AC layer. The interaction and photoinduced charge transfer ability of the 3D-graphene/Ge heterojunction with incident light are improved. Moreover, the high density of electronic states close to the Fermi level of the heterojunction induces the adsorbed probe molecules to efficiently couple to the 3D-graphene-based SERS substrate. Our experimental results imply that the lowest concentrations of rhodamine 6G and rhodamine B that can be detected on the 3D/2D-graphene/Ge SERS substrate correspond to 10-10 M; for methylene blue, it is 10-8 M. The detection limits of the 3D/2D-graphene/Ge SERS substrate with respect to 3-hydroxytyramine hydrochloride and melamine (in milk) are both less than 1 ppm. This work may provide a viable and convenient alternative method for preparing 3D-graphene SERS substrates. It also constitutes a new approach to developing SERS substrates with remarkable performance levels.
RESUMEN
Surface-enhanced Raman scattering (SERS) substrates based on graphene and its derivatives have recently attracted attention among those interested in the detection of trace molecules; however, these substrates generally show poor uniformity, an unsatisfactory enhancement factor, and require a complex fabrication process. Herein, we design and fabricate three-dimensional (3D) graphene/silicon (3D-Gr/Si) heterojunction SERS substrates to detect various types of molecules. Notably, the detection limit of 3D-Gr/Si can reach 10-10 M for rhodamine 6G (R6G) and rhodamine B (RB), 10-7 M for crystal violet (CRV), copper(II) phthalocyanine (CuPc), and methylene blue (MB), 10-8 M for dopamine (DA), 10-6 M for bovine serum albumin (BSA), and 10-5 M for melamine (Mel), which is superior to most reported graphene-based SERS substrates. Besides, the proposed 3D-Gr/Si heterojunction SERS substrates can achieve a high uniformity with relative standard deviations (RSDs) of less than 5%. Moreover, the 3D-Gr/Si SERS substrates are reusable after washing with ethyl alcohol to remove the adsorbed molecules. These excellent SERS performances are attributed to the novel 3D structure and abundantly exposed atomically thin edges, which facilitate charge transfer between 3D-Gr and probe molecules. We believe that the 3D-Gr/Si heterojunction SERS substrates offer potential for practical applications in biochemical molecule detection and provide insight into the design of high-performance SERS substrates.
RESUMEN
The rapid and sensitive diagnosis of the highly contagious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is one of the crucial issues at the outbreak of the ongoing global pandemic that has no valid cure. Here, we propose a SARS-CoV-2 antibody conjugated magnetic graphene quantum dots (GQDs)-based magnetic relaxation switch (MRSw) that specifically recognizes the SARS-CoV-2. The probe of MRSw can be directly mixed with the test sample in a fully sealed vial without sample pretreatment, which largely reduces the testers' risk of infection during the operation. The closed-tube one-step strategy to detect SARS-CoV-2 is developed with home-made ultra-low field nuclear magnetic resonance (ULF NMR) relaxometry working at 118 µT. The magnetic GQDs-based probe shows ultra-high sensitivity in the detection of SARS-CoV-2 due to its high magnetic relaxivity, and the limit of detection is optimized to 248 Particles mLâ1. Meanwhile, the detection time in ULF NMR system is only 2 min, which can significantly improve the efficiency of detection. In short, the magnetic GQDs-based MRSw coupled with ULF NMR can realize a rapid, safe, and sensitive detection of SARS-CoV-2.
RESUMEN
Those responsible for the development of sonosensitizers are faced with a dilemma between high sonosensitization efficacy and good biosecurity that limited the development of sonodynamic therapy (SDT). Herein, inspired by the intriguing therapeutic features of SDT and the potential catalytic activity of graphene quantum dots, the potential of N-doped graphene quantum dots (N-GQDs) to act as a sonosensitizer is demonstrated. The superior sonosensitization effect of N-GQDs is believed to be three to five times higher than that of traditional sonosensitizers (such as porphyrin, porphyrin Mn, porphyrin Zn, TiO2 , etc.). More importantly, the sonochemical mechanism of N-GQDs is revealed. Pyrrole N and pyridine N are believed to form catalytic centers in sonochemical processing of N-GQDs. This knowledge is important from the perspective of understanding the structure-dependent SDT enhancement of carbon nanostructure. Moreover, N-GQDs modified by folic acid (FA-N-GQDs) show a high marker rate for tumor cells (greater than 96%). Both in vitro and in vivo therapeutic results have exhibited high tumor inhibition efficiency (greater than 90%) of FA-N-GQDs as sonosensitizers while the oxidative stress response of tumor cells is activated through the PEX pathway and induced apoptosis via the p53 pathway.
Asunto(s)
Grafito , Puntos Cuánticos , Piridinas , Pirroles , Especies Reactivas de OxígenoRESUMEN
Early warning of tumor formation is crucial for the classification, treatment, and prognosis of tumor patients. Here, a new strategy is reported, aimed at realizing this goal based on imaging aerobic glycolysis processes using nitrogen-doped carbon dots (N-CDs) as fluorescent probes. The intensity of the photoluminescence emitted by the N-CDs is specifically enhanced by nicotinamide adenine dinucleotide (NAD+ , oxidized) in the physiological environment. The N-CDs allow a few (five to ten) abnormal cells in spontaneous hepatocellular carcinoma models to be identified before the in situ development of tumor tissue. The N-CD probes can also distinguish tumor cells from normal cells and be used to evaluate their proliferation activity (with a specificity of up to 96.15% in 13 types of tumor cells and 90.90% in orthotopic xenograft models). The N-CDs are successfully used to monitor the invasion of tumor cells into neighboring tissues and body fluids in 49 clinical samples (with a sensitivity up to 79.31%). These included three vitreous body samples (from patients with retinoblastoma), 42 urine samples (22 patients clinically diagnosed with urothelium carcinoma and 20 healthy persons), and four hydrothorax samples (from patients with metastatic lesions).
Asunto(s)
Carcinogénesis , Colorantes Fluorescentes/química , Glucólisis , Imagen Óptica/métodos , Puntos Cuánticos/química , Línea Celular Tumoral , Transformación Celular Neoplásica , Humanos , Oxidación-ReducciónRESUMEN
Carbon-based quantum dots (CQDs), including spherical carbon dots and graphene quantum dots, are an emerging class of photoluminescent (PL) materials with unique properties. Great progress has been made in the design and fabrication of high-performance CQDs, however, the challenge of developing solid-state PL CQDs have aroused great interest among researchers. A clear PL mechanism is the basis for the development of high-performance solid-state CQDs for light emission and is also a prerequisite for the realization of multiple practical applications. However, the extremely complex structure of a CQD greatly limits the understanding of the solid-state PL mechanism of CQDs. So far, a variety of models have been proposed to explain the PL of solid-state CQDs, but they have not been unified. This review summarizes the current understanding of the solid-state PL of solid-state CQDs from the perspective of energy band theory and electronic transitions. In addition, the common strategies for realizing solid-state PL in CQDs are also summarized. Furthermore, the applications of CQDs in the fields of light-emitting devices, anti-counterfeiting, fingerprint detection, etc., are proposed. Finally, a brief outlook is given, highlighting current problems, and directions for development of solid-state PL of CQDs.
RESUMEN
In ultra-low-field magnetic resonance imaging (ULF MRI) working in the micro-tesla magnetic field range, the superconducting quantum interference device (SQUID) as the signal detector is very susceptible to electromagnetic interference (EMI) so that the system normally works in a shielded room. However, the leakage of EMI in the shielded room may still seriously reduce the system performance. In order to improve the electromagnetic compatibility of the system, we designed a microwave absorbing composite, graphene/Cu/nylon fabric (GCN fabric). In this design, high shielding effectiveness and low-noise performance of the EMI shielding material are equally crucial due to the extremely sensitive detection with SQUID. The shielding effectiveness of 5-layer fabric ranges between 30 dB and 67 dB from 30 MHz to 3 GHz and its maximum appears at 60 MHz. Furthermore, GCN fabric introduces little extra system noise when applied in the ULF MRI system with magnetic field noise of 0.8 fT/Hz at 5 kHz. The SQUID unlocked tuned signal is thus increased by 33% and the signal-to-noise ratio of MRI image is increased by a factor of 4.3. In future, portable and inexpensive unshielded ULF MRI with low-noise might be realized by potential optimization on the component and preparation technology of GCN fabric.
RESUMEN
The design of contrast agents (CAs) with high magnetic relaxivities is a key issue in the field of magnetic resonance imaging (MRI). The traditional strategy employed is aimed at optimizing the structural design of the magnetic atoms in the CA. However, it is difficult to obtain an agent with magnetic relaxivity over 100 mM-1 s-1 using this approach. In this work, we demonstrate that modulation of the localized superacid microenvironment of certain CAs (Gd3+ loaded polyethylene glycol modified graphene oxide quantum dots or 'GPG' for short) can effectively enhance the longitudinal magnetic relaxivities (r1) by accelerating proton exchange. r1 values of a series of GPGs are significantly increased by 20-30 folds compared to commercially available CAs over a wide range of static magnetic field strengths (e.g. 210.9 mM-1 s-1vs. 12.3 mM-1 s-1 at 114 µT, 127.0 mM-1 s-1vs. 4.9 mM-1 s-1 at 7.0 T). GPG aided MRI images is then acquired both in vitro and in vivo with low biotoxicities. Furthermore, folic-acid-modified GPG is demonstrated suitable for MRI-fluorescence dual-modal tumor targeting imaging in animals with more than 98.3% specific cellular uptake rate.
Asunto(s)
Grafito , Neoplasias , Puntos Cuánticos , Animales , Medios de Contraste , Imagen por Resonancia Magnética , Microambiente TumoralRESUMEN
Three-dimensional graphene (3D-Gr) with excellent light absorption properties has received enormous interest, but in conventional processes to prepare 3D-Gr, amorphous carbon layers are inevitably introduced as buffer layers that may degrade the performance of graphene-based devices. Herein, 3D-Gr is prepared on germanium (Ge) using two-dimensional graphene (2D-Gr) as the buffer layer. 2D-Gr as the buffer layer facilitates the in situ synthesis of 3D-Gr on Ge by plasma-enhanced chemical vapor deposition (PECVD) by promoting 2D-Gr nucleation and reducing the barrier height. The growth mechanism is investigated and described. The enhanced light absorption as confirmed by theoretical calculation and 3D-Gr/2D-Gr/Ge with a Schottky junction improves the performance of optoelectronic devices without requiring pre- and post-transfer processes. The photodetector constructed with 3D-Gr/2D-Gr/Ge shows an excellent responsivity of 1.7 A W-1 and detectivity 3.42 × 1014 cm Hz1/2 W-1 at a wavelength of 1550 nm. This novel hybrid structure that incorporates 3D- and 2D-Gr into Ge-based integrated circuits and photodetectors delivers excellent performance and has large commercial potential.
RESUMEN
The evaluation of intracellular reactive oxygen species (ROS) would greatly deepen the understanding of cell metabolism/proliferation and tumor detection. However, current long-acting level tracking techniques for intracellular ROS remain unsuited to practical applications. To solve this problem, we synthesized cyclotriphosphazene-doped graphene quantum dots (C-GQDs) whose quantum yield is highly sensitive to ROS (increased by 400% from 0.12 to 0.63). Electron cloud polarization of oxidized cyclotriphosphazene rings in C-GQDs is confirmed to account for this novel optical property by density functional theory calculations and experimental results. In combination with excellent biological stability, C-GQDs achieve a long-acting evaluation of intracellular ROS level (more than 72 h) with an accuracy of 98.3%. In addition, recognition rates exceeding 90% are demonstrated to be feasible for eight kinds of tumor cell lines cultured with C-GQDs, which can also be expanded to in vivo detection. C-GQDs also show a high recognition rate (82.33%) and sensitivity (79.65%) for tumor cells in blood samples.
Asunto(s)
Grafito/química , Mediciones Luminiscentes/métodos , Neoplasias/metabolismo , Puntos Cuánticos/química , Especies Reactivas de Oxígeno/análisis , Animales , Línea Celular Tumoral , Humanos , Luminiscencia , Mediciones Luminiscentes/instrumentación , Ratones , Ratones Endogámicos BALB C , Neoplasias/diagnóstico , Oxidación-Reducción , Compuestos de Fósforo/química , Especies Reactivas de Oxígeno/metabolismoRESUMEN
Flexible biocompatible mechanical energy harvesters are drawing increasing interest because of their high energy-harvesting efficiency for powering wearable/implantable devices. Here, a type of "self-matched" tribo-piezoelectric nanogenerators composed of genetically engineered recombinant spider silk protein and piezoelectric poly(vinylidene fluoride) (PVDF)-decorated poly(ethylene terephthalate) (PET) layers is reported. The PET layer serves as a shared structure and electrification layer for both piezoelectric and triboelectric nanogenerators. Importantly, the PVDF generates a strong piezo-potential that modifies the surface potential of the PET layer to match the electron-transfer direction of the spider silk during triboelectrification. A "vapor-induced phase-separation" process is developed to enhance the piezoelectric performance in a facile and "green" roll-to-roll manufacturing fashion. The devices show exceptional output performance and energy transformation efficiency among currently existing energy harvesters of similar sizes and exhibit the potential for large-scale fabrication and various implantable/wearable applications.
Asunto(s)
Polivinilos/química , Seda/química , Arañas/química , Animales , Suministros de Energía Eléctrica , Electricidad , Transporte de Electrón , Diseño de Equipo , Transición de Fase , Tereftalatos Polietilenos/química , Proteínas Recombinantes/químicaRESUMEN
Electrochemical exfoliation of graphite stands out as a promising alternative to the existing methods for scalable graphene fabrication. However, factors governing the electrochemical process and the underlying mechanism are complex and how to effectively control the exfoliation process is far from completely clear despite many attempts in previous works. Herein, for the first time, capillary infiltration, anodic oxidation and their dependence on temperature were found to be critical in determining the electrolyte infiltration and the anodic oxidation process. On this basis, we achieved tuning of sheet dimensions (both thickness and lateral size) and surface chemistry of graphene by facilely controlling the temperature (5-95 °C). Four kinds of graphene materials featuring small size, porosity, water dispersibility and large size can be selectively fabricated in the same electrolyte system at different temperatures. Especially, low-temperature exfoliation results in high yields (99.5%) of small-sized graphene, which is a new breakthrough for electrochemical methods. The finding and associated mechanism of temperature's influence on both capillary infiltration and anodic oxidation not only deepen our understanding of the electrochemical exfoliation, but also make electrochemistry a versatile technique for graphene fabrication.