Self-Adhesive Electronic Skin with Bio-Inspired 3D Architecture for Mechanical Stimuli Monitoring and Human-Machine Interactions.

Recent development of wearable devices is revolutionizing the way of artificial electronic skins (E-skin), physiological health monitoring and human-machine interactions (HMI). However, challenge remains to fit flexible electronic devices to the human skin with conformal deformation and identifiable electrical feedback according to the mechanical stimuli. Herein, an adhesive E-skin is developed that can firmly attach on the human skin for mechanical stimuli perception. The laser-induced adhesive layer serves as the essential component to ensure the conformal attachment of E-skin on curved surface, which ensures the accurate conversion from mechanical deformation to precise electrical readouts. Especially, the 3D architecture facilitates the non-overlapping outputs that bi-directional joint bending and distinguishes strain/pressure. The optimized E-skin with bio-inspired micro-cilia exhibited significantly improved sensing performances with sensitivity of 0.652 kPa-1 in 0-4 kPa and gauge factor of 8.13 for strain (0-15%) with robustness. Furthermore, the adhesive E-skin can distinguish inward/outward joint bending in non-overlapping behaviors, allowing the establishment of ternary system to expand communication capacity for logic outputs such as effective Morse code and intelligent control. It expects that the adhesive E-skin can serve as a functional bridge between human and electrical terminals for applications from daily mechanical monitoring to efficient HMI.

Bioaccumulation and behavioral response patterns of crucian carp (Carassius carassius) after carbamazepine exposure and elimination.

The antiepileptic drug carbamazepine (CBZ) has been widely detected in freshwater, yet its toxic actions in fish at multiple endpoints and the subsequent recovery patterns of the impacted are less discussed. This study investigated the bioaccumulation, physiological and behavioral changes of crucian carp (Carassius carassius) following CBZ exposure (G1 = 6.15 µg/L, G2 = 61.5 µg/L, G3 = 615 µg/L, G4 = 6150 µg/L) and subsequent recovery. Our results showed that CBZ was more likely to accumulate in the liver and brain than in the gills. A concentration-dependent phenomenon was observed; however, the residual CBZ decreased to similar levels after recovery. The behavioral indicators (i.e. feeding, social and spontaneous swimming) were significantly inhibited after 7-days of CBZ exposure, and only recovered at low concentration treatment (G1) after 7-days recovery in CBZ-free water. The acetylcholinesterase (AChE) activity in the brain and superoxide dismutase (SOD) activity in the liver and gills were induced after CBZ exposure and returned to normal levels after 7-days of recovery. In contrast, the inhibition of catalase (CAT) activity caused by CBZ exposure persisted in the high concentration treatment (G4) after recovery. Furthermore, correlation analysis indicated that changes in feeding behavior were closely related to the variation of CBZ concentrations in tissues, and the persistence of abnormal swimming and social behavior was closely related to gill CAT activity. These findings contribute to explore the toxic mechanisms of CBZ and highlight the recovery process and connections between various endpoints.

Durable superhydrophobic surface in wearable sensors: From nature to application.

The current generation of wearable sensors often experiences signal interference and external corrosion, leading to device degradation and failure. To address these challenges, the biomimetic superhydrophobic approach has been developed, which offers self-cleaning, low adhesion, corrosion resistance, anti-interference, and other properties. Such surfaces possess hierarchical nanostructures and low surface energy, resulting in a smaller contact area with the skin or external environment. Liquid droplets can even become suspended outside the flexible electronics, reducing the risk of pollution and signal interference, which contributes to the long-term stability of the device in complex environments. Additionally, the coupling of superhydrophobic surfaces and flexible electronics can potentially enhance the device performance due to their large specific surface area and low surface energy. However, the fragility of layered textures in various scenarios and the lack of standardized evaluation and testing methods limit the industrial production of superhydrophobic wearable sensors. This review provides an overview of recent research on superhydrophobic flexible wearable sensors, including the fabrication methodology, evaluation, and specific application targets. The processing, performance, and characteristics of superhydrophobic surfaces are discussed, as well as the working mechanisms and potential challenges of superhydrophobic flexible electronics. Moreover, evaluation strategies for application-oriented superhydrophobic surfaces are presented.

Stochastic process is main factor to affect plateau river fish community assembly.

Plateau river ecosystems are often highly vulnerable and responsive to environmental change. The driving mechanism of fish diversity and community assembly in plateau rivers under changing environments presents a significant complexity to the interdisciplinary study of ecology and environment. This study integrated molecular biological techniques and mathematical models to identify the mechanisms influencing spatial heterogeneity of freshwater fish diversity and driving fish community assembly in plateau rivers. By utilizing environmental-DNA metabarcoding and the null model, this study revealed the impact of the stochastic process on fish diversity variations and community assembly in the Huangshui Plateau River of the Yellow River Basin (YRB) in China. This research identified 30 operational taxonomic units (OTUs), which correspond to 20 different fish species. The findings of this study revealed that the fish α-diversity in the upstream region of Xining is significantly higher than in the middle-lower reach (Shannon index: P = 0.017 and Simpson: P = 0.035). This pattern was not found to be related to any other environmental factors besides altitude (P = 0.023) that we measured. Further, the study indicated that the assembly of fish communities in the Huangshui River primarily depends on stochastic ecological processes. These findings suggested that elevation was not the primary factor impacting the biodiversity patterns of fish in plateau rivers. In plateau rivers, spatial heterogeneity of fish community on elevation is mainly determined by stochastic processes under habitat fragmentation, rather than any other physicochemical environmental factors. The limitations of connectivity in the downstream channel of the river could be taken the mainly responsibility for stochastic processes of fish community in Huangshui River. Incorporating ecological processes in the eDNA approach holds great potential for future monitoring and evaluation of fish biodiversity and community assembly in plateau rivers.

Single Channel Based Interference-Free and Self-Powered Human-Machine Interactive Interface Using Eigenfrequency-Dominant Mechanism.

The recent development of wearable devices is revolutionizing the way of human-machine interaction (HMI). Nowadays, an interactive interface that carries more embedded information is desired to fulfill the increasing demand in era of Internet of Things. However, present approach normally relies on sensor arrays for memory expansion, which inevitably brings the concern of wiring complexity, signal differentiation, power consumption, and miniaturization. Herein, a one-channel based self-powered HMI interface, which uses the eigenfrequency of magnetized micropillar (MMP) as identification mechanism, is reported. When manually vibrated, the inherent recovery of the MMP causes a damped oscillation that generates current signals because of Faraday's Law of induction. The time-to-frequency conversion explores the MMP-related eigenfrequency, which provides a specific solution to allocate diverse commands in an interference-free behavior even with one electric channel. A cylindrical cantilever model is built to regulate the MMP eigenfrequencies via precisely designing the dimensional parameters and material properties. It is shown that using one device and two electrodes, high-capacity HMI interface can be realized when the magnetic micropillars (MMPs) with different eigenfrequencies have been integrated. This study provides the reference value to design the future HMI system especially for situations that require a more intuitive and intelligent communication experience with high-memory demand.

Crosstalk-Free Position Mapping for One-Step Reconstruction of Surface Topological Information via Eigenfrequency-Registered Wearable Interface.

Exploring flexible tactile sensors capable of recognizing surface information is significant for the development of virtual reality, artificial intelligence, soft robotics, and human-machine interactions (HMI). However, it is still a challenge for current tactile sensors to efficiently recognize the surface pattern information while maintaining the simplicity of the overall system. In this study, cantilever beam-like magnetized micropillars (MMPs) with height gradients are assembled as a position-registered array for rapid recognition of surface pattern information. After crossing the surface location with convex patterns, the deformed MMPs undergo an intrinsic oscillating process to induce damped electrical signals, which can then be converted to a frequency domain for eigenfrequency extraction. Via precisely defining the specific eigenfrequencies of different MMPs, position mapping is realized in crosstalk-free behavior even though all signals are processed by one communication channel and a pair of electrodes. With a customized LabVIEW program, the surface information (e.g., letters, numbers, and Braille) can be accurately reconstructed by the frequency sequence produced in a single scanning procedure. We expect that the proposed interface can be a convenient and powerful platform for intelligent surface information perception and an HMI system in the future.

Coupling of static ultramicromagnetic field with elastic micropillar-structured substrate for cell response.

Micropillars have emerged as promising tools for a wide range of biological applications, while the influence of magnetic fields on cell behavior regulation has been increasingly recognized. However, the combined effect of micropillars and magnetic fields on cell behaviors remains poorly understood. In this study, we investigated the responses of H9c2 cells to ultramicromagnetic micropillar arrays using NdFeB as the tuned magnetic particles. We conducted a comparative analysis between PDMS micropillars and NdFeB/PDMS micropillars to assess their impact on cell function. Our results revealed that H9c2 cells exhibited significantly enhanced proliferation and notable cytoskeletal rearrangements on the ultramicromagnetic micropillars, surpassing the effects observed with pure PDMS micropillars. Immunostaining further indicated that cells cultured on ultramicromagnetic micropillars displayed heightened contractility compared to those on PDMS micropillars. Remarkably, the ultramicromagnetic micropillars also demonstrated the ability to decrease reactive oxygen species (ROS) levels, thereby preventing F-actin degeneration. Consequently, this study introduces ultramicromagnetic micropillars as a novel tool for the regulation and detection of cell behaviors, thus paving the way for advanced investigations in tissue engineering, single-cell analysis, and the development of flexible sensors for cellular-level studies.

Applications of flexible electronics related to cardiocerebral vascular system.

Ensuring accessible and high-quality healthcare worldwide requires field-deployable and affordable clinical diagnostic tools with high performance. In recent years, flexible electronics with wearable and implantable capabilities have garnered significant attention from researchers, which functioned as vital clinical diagnostic-assisted tools by real-time signal transmission from interested targets in vivo. As the most crucial and complex system of human body, cardiocerebral vascular system together with heart-brain network attracts researchers inputting profuse and indefatigable efforts on proper flexible electronics design and materials selection, trying to overcome the impassable gulf between vivid organisms and rigid inorganic units. This article reviews recent breakthroughs in flexible electronics specifically applied to cardiocerebral vascular system and heart-brain network. Relevant sensor types and working principles, electronics materials selection and treatment methods are expounded. Applications of flexible electronics related to these interested organs and systems are specially highlighted. Through precedent great working studies, we conclude their merits and point out some limitations in this emerging field, thus will help to pave the way for revolutionary flexible electronics and diagnosis assisted tools development.

Bifunctional Alloy/Solid-Electrolyte Interphase Layer for Enhanced Potassium Metal Batteries Via Prepassivation.

Potassium (K) metal batteries have attracted great attention owing to their low price, widespread distribution, and comparable energy density. However, the arbitrary dendrite growth and side reactions of K metal are attributed to high environmental sensitivity, which is the Achilles' heel of its commercial development. Interface engineering between the current collector and K metal can tailor the surface properties for K-ion flux accommodation, dendrite growth inhibition, parasitic reaction suppression, etc. We have designed bifunctional layers via prepassivation, which can be recognized as an O/F-rich Sn-K alloy and a preformed solid-electrolyte interphase (SEI) layer. This Sn-K alloy with high substrate-related binding energy and Fermi level demonstrates strong potassiophilicity to homogeneously guide K metal deposition. Simultaneously, the preformed SEI layer can effectually eliminate side reactions initially, which is beneficial for the spatially and temporally KF-rich SEI layer on K metal. K metal deposition and protection can be implemented by the bifunctional layers, delivering great performance with a low nucleation overpotential of 0.066 V, a high average Coulombic efficiency of 99.1%, and durable stability of more than 900 h (1 mA cm-2, 1 mAh cm-2). Furthermore, the high-voltage platform, energy, and power densities of K metal batteries can be realized with a conventional Prussian blue analogue cathode. This work provides a paradigm to passivate fragile interfaces for alkali metal anodes.

Preparation and Properties of Foam Concrete Incorporating Fly Ash.

Foam concrete is fire resistant and durable and has broad applicability as a building insulation material. However, cement has high energy consumption and causes pollution, necessitating an environment-friendly cementitious material to replace the cement used to prepare foam concrete. In this study, foam concrete was prepared through chemical foaming. The influence of the foaming agent material, foam stabiliser, and fly ash on the basic properties of the foam concrete, including the dry bulk density, compressive strength, and thermal conductivity, was studied, and the pore structure was characterised. The results show that with an increase in the hydrogen peroxide (H2O2) content, the dry bulk density, compressive strength, and thermal conductivity of foam concrete decreases, whereas the pore diameter increases (0.495 to 0.746 mm). When the calcium stearate content is within 1.8%, the pore size tends to increase (0.547 to 0.631 mm). With increase in the fly ash content, the strength of foam concrete gradually decreases, and the dry bulk density first decreases and then increases. When the blending ratio of fly ash is 10-40%, the thermal conductivity gradually decreases; an extreme thermal conductivity of 0.0824 W/(m·K) appears at the blending ratio of 40%, and the dry bulk density is 336 kg/m3.