RESUMEN
BACKGROUND: Bone defects around the teeth affect a large portion of the population. Bone regeneration in the area of existing teeth is completely different from that in an edentulous area. To date, no method has been developed for three-dimensional (3D) bone reconstruction in regions with preserved teeth. OBJECTIVES: This study aimed to radiologically evaluate the results of the new method of 3D mandibular bone reconstruction in preserved dentition using a custom-made allogeneic bone block with a 6-month follow-up. MATERIAL AND METHODS: Alveolar ridge dimensions were radiographically assessed before and 6 months after reconstruction using cone beam computed tomography (CBCT) scans in 32 patients (192 teeth). Reconstruction used a bone block that had been previously planned and prepared using CAD/CAM technology. RESULTS: The observed changes in alveolar bone dimensions were highly significant in most cases (p < 0.001). The closer to the tooth root apex, the lower the bone growth in the sagittal dimension (average of the mean values for each tooth examined in the measured heights): CEJ2: 2.9 mm, ½ CEJ2: 2.7 mm, » CEJ2: 1.9 mm, and API: 1.4 mm. The maximum bone growth in the vertical dimension was observed on tooth 43 (9.9 mm), followed by 32 (9.8 mm), 33 (8.5 mm), 31 (8.4 mm), 42 (8 mm), and 41 (7 mm). The degree of decrease in vestibular dehiscence of the bone was greater the closer the tooth was to the midline (average of -3.8 mm and -3.4 mm for the central incisors; average of -2.8 mm and -2.6 mm for the lateral incisors; average of -2.6 mm and -2.5 mm for the canines). CONCLUSIONS: The results prove that it is possible to prevent bone dehiscence in patients undergoing orthodontic treatment, increasing the ability and effectiveness of covering recessions and improving the morphology of the lower part of the face.
RESUMEN
Alveolar reconstructive surgery employs a variety of surgical techniques and biomaterials, with a particular focus on bone blocks as a crucial methodology for restoring and augmenting deficient bone structures. Bone blocks are often employed to support periodontal health or as a foundation for future prosthetic rehabilitation with dental implants. This systematic review investigated recent advances in bone blocks for alveolar bone reconstruction, comparing autologous, allogeneic and xenogeneic types. A search of PubMed identified 56 records, of which 21 were included in the qualitative analysis. The studies involved 685 patients in total. Bone blocks are pivotal for three-dimensional bone regeneration, providing a stable scaffold for achieving the desired bone volume during healing. Autologous bone, harvested from the patient, boasts high biocompatibility, excellent osteogenic properties and minimal immunologic risks. However, its drawbacks include the need for an additional surgical site and extended procedural times. Allogeneic bone blocks involve transferring bone between individuals, offering increased graft availability and customization options without requiring a second surgical site. However, they exhibit moderate resorption rates and carry a heightened risk of immunologic reactions and disease transmission. Innovative techniques, such as tunneling, laser osteotomy, graft customization, and platelet-rich fibrin (PRF) application on wound during surgical treatment show promise in enhancing alveolar bone reconstruction efficacy. In conclusion, despite the traditional preference for autologous bone, the review suggests that alternative materials, particularly individualized allogeneic bone blocks, coupled with modern techniques, could emerge as a standard procedure for regenerating alveolar bone defects due to their satisfactory results and potential advantages.
RESUMEN
Blended Intensive Programmes (BIP's) represent a valuable tool for gathering knowledge and summarising the latest trends in medicine and dentistry. Blended education has been found, even before the COVID-19 pandemic, to increase the level of education and stimulate effective learning for postgraduate healthcare professionals. Interprofessional education is critical for preparing students to enter the health workforce, where teamwork and collaboration are important competencies. This article outlines the key points of the Blended Intensive Programme's implementation in dental education organised by Wroclaw Medical University in Poland. BIP involved professors from 12 universities or research institutions from Europe and South America and 28 participants from 8 countries. The course was taught remotely and in person. In addition, it included a visit to the university and practical classes with artificial simulation and practice in dentistry. A structured questionnaire enabled measuring the evaluation of students' perception of the COVID-19 education before and after the pandemic. The European Region Action Scheme for the Mobility of University Students (ERASMUS) was fundamental to carrying out the BIP with the participation of several countries, allowing the exchange of knowledge, assessing the impact of the pandemic on dental universities, and strengthening international collaborations and the future project of research, education and clinical assistance. We conclude that hybrid teaching programmes broaden the learning spectrum in dental studies by allowing transnational and interdisciplinary approaches that make students aware of the importance of their work within the framework of the general health approach, as this differs from country to country.
Asunto(s)
Aprendizaje , Pandemias , Humanos , Curriculum , Estudiantes , Educación en OdontologíaRESUMEN
BACKGROUND: The development of malocclusion is related to various factor, many of which are still not fully explained. The steroid hormone, 1,25-dihydroxyvitamin D3, has pleiotropic effects. It plays a key role in skeletal metabolism and the control of cell repair by attaching to the nuclear vitamin D steroid receptor (VDR). This vitamin affects bone turnover through the processes of bone tissue formation and resorption via its action on cells of the osteoblastic and osteoclastic lineage, exerts a modulating effect on the immune system, and is involved in the regulation of cell proliferation and differentiation. The role of vitamin D3 (VD3) and its receptor polymorphisms is a rarely studied topic in dentistry. Due to the proven influence on bone turnover processes and immune responses, the main research topic is its relation to periodontal diseases, but so far, its role in the formation and development of malocclusions has not been assessed. OBJECTIVES: This study aimed to assess the association of selected VDR polymorphisms: Cdx2 (rs11658820), TaqI (rs7975232), BsmI (rs1544410), ApaI (rs7975232), and FokI (rs2228570) with the development of malocclusions. MATERIAL AND METHODS: A prospective observational study was performed. The examination consisted of a medical interview, intraand extraoral orthodontic diagnosis, alginate impression, cone beam computed tomography (CBCT), and venous blood sample to obtain genomic DNA and assess VDR polymorphisms. RESULTS: The rs11658820 polymorphism causes an almost 4-fold increase in the probability of the presence of a malocclusion. GT and TT genotypes of rs7975232 are also associated with a similar risk - almost 6 and almost 5 times higher, respectively. In turn, the effect of the rs2228570-AG and GG genotype polymorphisms on the occurrence of transversal anomalies was demonstrated (odds ratio (OR) = 8.46 and OR = 6.92, respectively). CONCLUSIONS: The association of individual polymorphisms with specific malocclusions should be carefully assessed, especially since some trends have been indicated.
Asunto(s)
Predisposición Genética a la Enfermedad , Maloclusión , Receptores de Calcitriol , Humanos , Receptores de Calcitriol/genética , Maloclusión/genética , Femenino , Masculino , Polimorfismo de Nucleótido Simple , Estudios Prospectivos , Adulto , Adulto Joven , Adolescente , Polimorfismo GenéticoRESUMEN
BACKGROUND: Maintaining biosafety in dental practice involves the effective elimination of aerosols produced during dental treatment. OBJECTIVES: To assess the quantity of aerosols and aerobic bacteria in the air during the treatment of caries. MATERIAL AND METHODS: The study involved 60 patients with a total of 60 molar teeth (n = 60) in the mandible who were divided into 2 groups based on caries treatment method. Group 1 (G1, n = 30) received treatment with a conventional dental turbine (W&H Synea TA-98LC; W&H, Burmoos, Austria), while group 2 (G2, n = 30) underwent treatment with an Er:YAG (erbium-doped yttrium aluminium garnet) laser (LightWalker, Fotona, Slovenia). Measurements of aerosol particles between 0.3 Em and 10.0 Em near the operatorfs mouth were taken using the PC200 laser particle counter (Trotec GmbH, Schwerin, Germany). The number of aerobic bacteria in the air was determined using 60 Petri plates with a microbiological medium (Columbia agar with 5% sheep blood) and the sedimentation method. A control group (G3) was established to measure initial aerosol levels and initial total number of bacteria colony-forming units (CFUs) before each treatment. RESULTS: In G1 (dental turbine), the median value of aerosol particles was 57,021 (42,564.67,568), while in G2 (Er:YAG laser), it was significantly lower at 33,318 (28,463.35,484) (p < 0.001). The median total bacteria count per cubic meter of air in G1 (conventional dental turbine + high volume evacuator (HVE)), G2 (Er:YAG laser + HVE) and G3 (control group before caries treatment) were 734 (420.988), 158 (96.288) and 48 (32.74), respectively, with a statistically significant difference between the groups (p < 0.001). CONCLUSIONS: The use of Er:YAG laser during caries treatment resulted in a 41.6% reduction in aerosol amounts and a 78.5% decrease in the total bacterial count (TBC) compared to treatment with a dental turbine.
RESUMEN
In an effort to prepare non-autologous bone graft or biomaterial that would possess characteristics comparable to autologous bone, many different allogenic bone derivatives have been created. Although different existing processing methods aim to achieve the very same results, the specific parameters applied during different stages material preparation can result in significant differences in the material's mechanical and biological properties The properties, including osteoconductive, osteoinductive, and even osteogenic potential, can differ vastly depending on particular preparation and storage techniques used. Osteogenic properties, which have long been thought to be characteristic to autogenic bone grafts only, now seem to also be achievable in allogenic materials due to the possibility to seed the host's stem cells on a graft before its implantation. In this article, we aim to review the available literature on allogenic bone and its derivatives as well as the influence of different preparation methods on its performance.
Asunto(s)
Materiales Biocompatibles , Huesos , Osteogénesis , Regeneración Ósea , Odontología , Trasplante Óseo/métodosRESUMEN
BACKGROUND: Fumigation with hydrogen peroxide has proven to be a highly effective approach to maintaining biological safety within dental offices. The main purpose of this research was to investigate the efficacy of hydrogen peroxide (H2O2) fumigation in reducing bacterial levels in dental office environments. METHODS: The study involved 30 participants diagnosed with moderate caries decay (ICDAS 3 and 4) in their mandibular molars. Sixty Petri dishes (two per patient) with Columbia Agar and 5% Sheep Blood were opened at the beginning of the caries treatment. After the completion of caries treatment and tooth restoration, 30 plates (G1 group) were closed. Following this, a 20 min fumigation procedure with 6% hydrogen peroxide biosanitizer using a compressed air device was conducted. After the fumigation, the remaining plates were closed (G2 group). The total number of bacteria CFUs (colony-forming units) in the dental office air was determined using the Koch sedimentation method. RESULTS: The total bacterial colony (TBC) level, measured in cfu/m3, demonstrated a significant decrease in the number of bacteria following room environment fumigation (163.1 ± 145.7; G2 group) compared to non-fumigated samples (817.2 ± 208.2; G1 group) (p < 0.001). The predominant bacteria observed in the microbiological plates before fumigation were Micrococcus and Bacillus species, found in 80% (24/30) and 60% (18/30) of the plates, respectively. Application of H2O2 room fumigation resulted in a significant reduction in bacterial numbers: 79.2% (5/30) for Micrococcus species (p < 0.001), 83.3% (3/30) for Bacillus species (p < 0.001), and 100% (0/30) for Staphylococcus arlettae (p < 0.05). CONCLUSION: Fumigation with 6% H2O2 is an effective method for reducing bacterial counts in a dental office environment.
RESUMEN
The aim of this study was to determine the content of mercury in impacted third molars from Legnica-Glogów Copper Area residents to emphasize the effects of environmental pollution on the human body. A group of 72 patients with an average age of 27.3 ± 6.9 years participated in the study. Within this study, the research group (Legnica-Glogów Copper Area residents) comprised 51 individuals, while the control group (residents of Wroclaw) consisted of 21 participants. A higher number of female individuals participated in the research (55). The amount of mercury present in the samples was determined through atomic absorption spectrometry with the use of a SpectraAA atomic absorption spectrometer and a V2 AA240FS flame attachment that utilized an air-acetylene flame. The accumulation of Hg in the teeth of members of the control group residing in Wroclaw was studied, with a focus on identifying the risk factors that contribute to this phenomenon. The final model analyzed the presence of various factors, including thyroid and parathyroid gland diseases, cardiac diseases, and interval-scale Vit. D3 concentration. Among these factors, the presence of cardiac diseases was deemed statistically significant in relation to an increase in Hg concentration in third molars (rate ratio = 2.27, p < 0.0001). The concentration of mercury increased with the age and time of residence in the L-G Copper District.
RESUMEN
BACKGROUND: Effective removal of aerosols generated during dental treatment is crucial for maintaining biosafety in dental practice. This study aimed to measure the aerosol amount and the number of aerobic bacteria in the air during caries treatment. METHODS: The study involved 50 molar teeth (n = 50) in the mandible in 50 patients divided into two groups based on the type of a high-volume evacuator (HVE); G1 (n = 25) conventional HVE (EM19 EVO, Monoart® Euronda, Vicenza, Italy) and G2 (n = 25) a new, wider, customized HVE. The PC200 laser particle counter (Trotec GmbH, Schwerin, Germany) was used to measure aerosol particles in a range of 0.3-10.0 µm near the operator's mouth. The study used 60 microbiological plates with a microbiological medium (Columbia Agar with 5% Sheep Blood) to check the number of aerobic bacteria in the air. RESULTS: The mean value of aerosol particles in the G1 group (conventional HVE) was 54,145 ± 7915, while in the G2 group (test, wider evacuator) was lower and amounted to 32,632 ± 1803. (p < 0.001). The median total bacteria count in the air per cubic meter in control, G1 (HVE), and G2 (NEW-HVE) groups were 50 [36-60]; 772 [643-881]; 120 [92-139], respectively. (p < 0.05). Gram-positive cocci were the predominant bacteria in the plates: Micrococcus sp. (50%), Bacillus species (36.4%), Staphylococcus epidermidis (3.8%), Staphylococcus saprophyticus (3.8%). CONCLUSIONS: the application of the wider high-volume evacuator increases the air purity during caries treatment as well as the biological safety of a dental office.
RESUMEN
Polygoni Cuspidati Rhizoma et Radix (syn. rhizomes of Reynoutria japonica Houtt.) is a pharmacopoeial raw material in Europe and China. In traditional medicine, one of the applications for Reynoutria japonica rhizomes is wound healing. In a recent in vitro study, we demonstrated that ethanol and acetone extracts from this herbal drug have the potential to heal oral gum wounds. However, considering that a majority of herbal medicines have been traditionally administered as water decoctions, in the present study, a decoction of Reynoutria japonica rhizomes was prepared and detailed tests to determine its in vitro gingival wound healing activity were conducted. We used the primary human gingival fibroblasts (HGF) incubated with a decoction to determine cell viability (MTT assay), cell proliferation (the confocal laser scanning microscope-CLSM), and cell migration (wound healing assay). Moreover, the collagen type III expression was examined using immunocytochemical staining. The studied decoction was qualitatively and quantitatively characterized using the validated HPLC/DAD/ESI-HR-QTOF-MS method. The Folin-Ciocalteu assay was used to determine the total phenols and tannins content. Additionally, HPLC-RI analysis of decoction and the previously obtained ethanol and acetone extracts was used to determine the composition of saccharides. Low concentration (from 50 to 1000 µg/mL) of decoction after 24 h incubation caused a significant increase in HGF cell viability. No cytotoxic effect was observed at any tested concentration (up to 2000 µg/mL). The lowest active concentration of decoction (50 µg/mL) was selected for further experiments. It significantly stimulated human gingival fibroblasts to proliferate, migrate, and increase the synthesis of collagen III. Phytochemical analysis showed significantly fewer polyphenols in the decoction than in the ethanol and acetone extracts tested earlier. In contrast, high levels of polysaccharides were observed. In our opinion, they may have a significant effect on the oral wound healing parameters analyzed in vitro. The results obtained encourage the use of this raw material in its traditional, safe form-decoction.
RESUMEN
Chemical composition and physical parameters of the implant surface, such as roughness, regulate the cellular response leading to implant bone osseointegration. Possible implant surface modifications include anodization or the plasma electrolytic oxidation (PEO) treatment process that produces a thick and dense oxide coating superior to normal anodic oxidation. Experimental modifications with Plasma Electrolytic Oxidation (PEO) titanium and titanium alloy Ti6Al4V plates and PEO additionally treated with low-pressure oxygen plasma (PEO-S) were used in this study to evaluate their physical and chemical properties. Cytotoxicity of experimental titanium samples as well as cell adhesion to their surface were assessed using normal human dermal fibroblasts (NHDF) or L929 cell line. Moreover, the surface roughness, fractal dimension analysis, and texture analysis were calculated. Samples after surface treatment have substantially improved properties compared to the reference SLA (sandblasted and acid-etched) surface. The surface roughness (Sa) was 0.59-2.38 µm, and none of the tested surfaces had cytotoxic effect on NHDF and L929 cell lines. A greater cell growth of NHDF was observed on the tested PEO and PEO-S samples compared to reference SLA sample titanium.
Asunto(s)
Implantes Dentales , Humanos , Propiedades de Superficie , Titanio/química , Ensayo de Materiales , Oseointegración/fisiologíaRESUMEN
Nowadays, the ceramic veneer approach can be considered more predictable than direct composite veneer. To date, there is a lack of studies comparing the clinical performance of anterior veneers cemented on vital teeth (VT) and non-vital teeth (NVT). This longitudinal clinical study investigated the performance of ceramic veneers in VT or anterior NVT. A total of 55 patients were evaluated in the study. Two groups were defined based on the vitality status of the teeth (93 teeth-vital and 61 teeth-non-vital). The United States Public Health Service (USPHS) criteria were used to assess the clinical status. The data were evaluated statistically with the Mann-Whitney U test. All restorations were considered acceptable, and only one veneer in VT failed for the criteria of secondary caries. There were no statistically significant differences in any of the criteria evaluated (p ≤ 0.671). The ceramic veneers evaluated showed a satisfactory clinical performance both in VT and NVT.
RESUMEN
Proper horizontal and vertical thickness of the gingival connective tissue has been proven to be one of the success criteria in dental implant and reconstructive surgery. When thin tissue is found, gingiva augmentation methods can be used to increase the quality and volume of the tissue. Many methods have been described, among them pedicle soft-tissue flaps or autogenic tissue grafts. As an alternative to patients' own tissue, xenogenic materials can be used for grafting. The fundamental issue is to choose a material that will ensure the maximum therapeutic effect, while also minimizing the negative influence on the patient's health. The aim of this study was to compare gingival augmentation procedures using a palatal connective tissue graft (CTG) and an xenogenic soft-tissue substitute, Geistlich Mucograft (xenogeneic collagen matrix; CMX), and assess whether the timing of the graft surgery influences the clinical outcomes. The original study was a randomized control trial with a total of 75 implants placed. The patients received the soft-tissue thickening 3 months before the implant placement or 3 months after the implant placement (depending on the group). A connective tissue graft (CTG) or Geistlich Mucograft were used (depending on the group). For both the CTG and Geistlich Mucograft, better clinical outcomes were observed for maintaining the alveolar bone level and the thickness of the attached gingiva compared to the control group with no gingival augmentation. The Geistlich Mucograft showed good clinical performance in comparison to the control. Soft-tissue augmentation with the CTG before the implant placement was found to be most efficient method in terms of a stable increase of the tissue thickness since, throughout the entire observation period, the greatest increase of 1.035 mm (SD = 0.73 mm) in thickness was observed. Statistically important differences in the tissue thickness baseline compared after 5 years were observed for groups G1 vs. G2b (no augmentation vs. CTG before), G1 vs. G3b (no augmentation vs. CTG after) and for groups G2b vs. G3a (CTG before vs. CMX after).
RESUMEN
The characteristics such as microtopography, physical and chemical properties influence the behavior of an implant in a soft tissue. Anodization-as a potent method of titanium alloy surface modification-of the transgingival abutment or healing screw, has achieved some improvement. One of the possible surface treatment method is low-pressure radiofrequency oxygen plasma treatment. The aim of the study was to evaluate the chemical properties and cytocompatibility of the experimental surface. Titanium discs made of grade-23 titanium alloy (Ti-6Al-4V) anodized (A sample) with different voltage parameters (28, 67, 78, and 98 V) were included in the study. Half of the samples regarded as the "S" group were additionally treated with low-pressure radiofrequency oxygen plasma treatment. The surfaces were characterized using scanning electron microscopy, X-ray spectroscopy and Raman spectroscopy, and electrochemically investigated via a corrosion test. Furthermore, two cell lines were used, including the CHO-compatible reference line and a primary human fibroblast line for the MTT assay; direct (contact) cytotoxicity of the materials was tested with the cells, and the growth of fibroblasts on the surfaces of the different materials was tested. The morphology of the "S"-treated samples did not differ from the morphology of only-anodized samples. However, the oxygen concentration on the surface in that group slightly increased by about 1% as a result of post-trial treatment. The highest corrosion resistance was observed for both A-78 V and S-78 V samples. The cytotoxicity assay revealed no changes in cell morphology or vitality. The MTT test proved comparable culture viability among all groups; however, the "S" samples showed statistically significantly higher fibroblast proliferation and adhesion scores compared to the "A" samples. Through the in vitro study, the low-pressure radiofrequency oxygen plasma treatment of the anodized Ti-6Al-4V alloy presented itself as an auspicious option in the field of transgingival element surface modification of implants.
RESUMEN
The insufficient volume of dental ridges is one of the most severe problems regarding an oral cavity. An inadequate amount can cause problems during various types of dental treatment. Its complexity originates from the etiopathogenesis of this problem. In this study, the representatives of auto-, allo-, and xenografts are compared. The physic-chemical differences between each of them were evaluated using XRD (X-ray Powder Diffraction), a SEM (Scanning Electron Microscopy), FT-IR (Fourier transformed infrared spectroscopy), and TGA (thermogravimetric analysis). Based on the SEM images, it was observed that the origin of the material has an influence on collagen fiber compact level and porosity. Following a comparison of FT-IR spectra and XRD, the crystal and chemical structures were described. Based on TGA, different water concentrations of the investigated materials, their high thermal stability, and concentration of inorganic phase, hydroxyapatite was determined. The presented study is important because it delivers information about chemical structure and its impact on bone regeneration. This knowledge should be taken into consideration by dental clinicians, because different types of bone grafts can accommodate the achievement of various goals.
RESUMEN
The most commonly used technique for covering gingival recessions is the coronally advanced flap (CAF) technique due to its high success rate. In clinical situations where there is less keratinized tissue apical to the defect due to unfavorable anatomical conditions, a more advantageous technique for this situation should be considered, specifically the laterally positioned flap (LPF). The aim of this study was to compare the gingival thickness after gingival recession coverage using the laterally positioned flap supported by an augmented and non-augmented connective tissue graft (CTG). Thirty-four patients with 105 gingival recessions of Miller's class I and/or II were enrolled in this study. The method of choice was the laterally positioned flap. The test group was treated with previously augmented CTG harvested from the palatal mucosa while the control group was treated with a non-augmented CTG. Clinical measurements were recorded at baseline, 6, 12 and 24 months after intervention. Clinical results showed a statistically more significant percentage of average and complete gingival recession coverage in the test group. The LPF in combination with an augmented CTG proves to be an effective alternative to the CAF. Greater improvement in gingival thickness was observed in the LPF with augmented CTG than in non-augmented CTG.
Asunto(s)
Recesión Gingival , Tejido Conectivo/trasplante , Estudios de Seguimiento , Encía/trasplante , Recesión Gingival/cirugía , Humanos , Colgajos Quirúrgicos/cirugía , Resultado del TratamientoRESUMEN
Obstructive sleep apnea (OSA) and sleep bruxism (SB) may appear concomitantly. Data on the relationship between OSA and SB are limited. It was shown that in a population with an increased risk of OSA, OSA was dependently correlated with SB on the degree of OSA severity only in mild and moderate cases of OSA. We aimed to confirm this relationship and affecting factors in a group of dental office patients in a prospective, observational study. Adult patients (n = 119) were evaluated using respiratory polygraphy. The risk of OSA was assessed using a STOP-Bang questionnaire (SBQ). The episodes of bruxism and respiratory events were scored according to the standards of the American Academy of Sleep Medicine. The prevalence of OSA and SB was found to be 63.02% and 41.17%, respectively. The bruxism episode index (BEI) was increased in the group with a higher risk of OSA (SBQ ≥ 3) compared to the group with a lower risk of OSA (3.49 ± 3.63 vs. 2.27 ± 2.50, p = 0.03). The sensitivity and specificity of the SBQ were not sufficient to predict SB. A positive linear correlation between AHI and BEI in the group with AHI < 23/h was found. The study confirmed that OSA was associated with SB in the group of patients with OSA and/or SB risk. The relationship between OSA and SB depended on the degree of severity of OSA and occurred in mild and moderate cases of OSA.
RESUMEN
Little is known about the nature of masseter muscle hypertrophy. We investigated the masseter muscle stiffness change after a single intra-masseteric session of Botox injections in people with benign bilateral masseter hypertrophy and the effect of the treatment on the stiffness of the temporalis muscle. Stiffness of the muscles was measured with shear-wave elastography at baseline and 3 weeks after Botox injections in 22 otherwise healthy people. Before the treatment, the stiffness of the masseter was lower than of the temporalis muscle (10.18 ± 1.67 kPa vs. 11.59 ± 1.54 kPa; p = 0.002). After the treatment, this difference increased (6.38 ± 1.34 vs. 13.10 ± 1.92; p < 0.0001). The drop in the stiffness of the masseter muscle was symmetrical (left side by 3.78 kPa; right side by 3.83 kPa). No differences between the left and right sides of the face in terms of muscle stiffness were observed. The study shows that Botox injections reduce stiffness of the masticatory muscles which, in turn, increases the stiffness of the temporalis muscles. Due to the knock-on effect of the change in the masseter function on the other masticatory muscles, simultaneous evaluation and treatment of the temporalis muscle may be required to ensure the desired functional and cosmetic effect.
RESUMEN
The implant-supported restoration of missing teeth is a recognized method of treatment that ensures a functional, esthetic and durable effect, along with patient satisfaction. However, the preferable time of dental implant loading is under debate. Currently, 3 protocols are used: immediate loading; early loading; and conventional (late) loading. Immediate loading provides benefits such as short treatment time, the elimination of the second surgery required for later loading protocols, the protection of the gingival papilla, an immediate esthetic effect, and high patient satisfaction. This review aimed to summarize the evidence on the impact of loading time on marginal bone loss (MBL) around dental implants, which is considered a useful measure of implantological treatment effects. A literature search was conducted based on the PubMed/MEDLINE database. The search focused on studies providing the MBL values by protocol. Out of the 1,366 hits received in the initial search, 10 studies were included in the qualitative analysis. At 12 months, the MBL range was 0.17-1.86 mm in patients undergoing the immediate protocol, 0.14-1.22 mm in patients undergoing the early protocol, and 0.44-0.91 mm in patients undergoing the late protocol. The studies were heterogeneous, but no significant differences in the occurrence of MBL were reported between the immediately and early loaded implants as compared with the conventionally loaded ones. Further studies are needed to determine other factors that might be related to the type of protocol, important for optimal patient treatment.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Carga Inmediata del Implante Dental , Pérdida de Hueso Alveolar/etiología , Pérdida de Hueso Alveolar/prevención & control , Implantación Dental Endoósea/efectos adversos , Implantación Dental Endoósea/métodos , Implantes Dentales/efectos adversos , Estética Dental , Humanos , Carga Inmediata del Implante Dental/métodosRESUMEN
Laser-induced periodic surface structures (LIPSS) are the sub-wavelength periodic nanostructures generated by the femtosecond laser. Implant topography and its nanostructural changes can be important for biomedical applications. In order to compare the surface topography of different implants, appropriate mathematical and physical descriptive methods should be provided. The aim of the study was to evaluate the experimental LIPSS-based-Low Spatial Frequency LIPSS (LSFL) dental implant surfaces. Novel methods of surface analysis, such as Fractal Dimension Analysis and Texture Analysis, were compared to the standard surface roughness evaluation. Secondary, cell viability, and attachment tests were applied in order to evaluate the biological properties of the new titanium surface and to compare their correlation with the physical properties of the new surfaces. A Normal Human Dermal Fibroblast (NHDF) cytotoxicity test did not show an impact on the vitality of the cells. Our study has shown that the laser LIPSS implant surface modifications significantly improved the cell adhesion to the tested surfaces. We observed a strong correlation of adhesion and the growth of cells on the tested surface, with an increase in implant surface roughness with the best results for the moderately rough (2 µm) surfaces. Texture and fractal dimension analyses are promising methods to evaluate dental implants with complex geometry.