Flushing effect of micro-bolus pulse injection and its potential impact on peripheral veins under hemostasis.

To explore the feasibility of using micro-bolus pulse injection method to reduce the dilution effect of pipeline on high concentration injection, and to understand low liquid volume bolus injection based on low injection speed. Using a programmable pulse injection pump, a 25-cm - long pipeline containing water-soluble fluorescent agent was flushed using different volumes of bolus, and the time spent for the complete disappearance of the fluorescent agent was recorded to evaluate the flushing efficiency. The finite element simulation of 2-phase flow was carried out using computational fluid dynamics (CFD) technology, and the difference of shear rate and pressure distribution in the vein of pulse injection and direct injection of bolus under hemostasis was compared and simulated. Micro-bolus pulse flushing has advantages in completing perfusion imaging applications, such as small volume imaging agent injection. Compared with non-pulse injection, the effective flushing volume decreases by 49.7%, the average injection speed decreases by 56%, and the maintenance time of high shear rate is shorter when using micro-bolus pulse injection. The impact of micro-bolus pulse injection on the vein can achieve the same or even lower negative effects as other injection methods after increasing the hemostatic distance to 100 mm. In the case of bolus injection requiring high concentration and small volume, such as for radiopharmaceutical dynamic imaging, the application of micro-bolus pulse injection is an effective way to overcome the dilution phenomenon of the imaging agent in the pipeline. During hemostasis, the micro-bolus pulse injection needs to control a longer hemostasis distance to reduce the potential impact on peripheral veins.

Correction to: Finite element analysis of two cephalomedullary nails in treatment of elderly reverse obliquity intertrochanteric fractures: zimmer natural nail and proximal femoral nail antirotation-ΙΙ.

In the original publication of this article [1], Chinese text of the Figs. 3, 4, 5 has not been converted to English.

Biomechanical efficacy of four different dual screws fixations in treatment of talus neck fracture: a three-dimensional finite element analysis.

BACKGROUND: Current there are different screws fixation methods used for fixation of the talar neck fracture. However, the best method of screws internal fixation is still controversial. Few relevant studies have focused on this issue, especially by finite element analysis. The purpose of this study was to explore the mechanical stability of dual screws internal fixation methods with different approaches and the best biomechanical environment of the fracture section, so as to provide reliable mechanical evidence for the selection of clinical internal fixation. METHODS: The computed tomography (CT) image of the healthy adult male ankle joint was used for three-dimensional reconstruction of the ankle model. Talus neck fracture and screws were constructed by computer-aided design (CAD). Then, 3D model of talar neck fracture which fixed with antero-posterior (AP) parallel dual screws, antero-posterior (AP) cross dual screws, postero-anterior (PA) parallel dual screws, and postero-anterior (PA) cross dual screws were simulated. Finally, under the condition of 2400N vertical load, finite element analysis (FEA) were carried out to compare the outcome of the four different internal fixation methods. The results of Von Mises stress, displacement of four groups which contain talus fracture fragments and screws internal fixations were analyzed. RESULTS: Compared with the other three groups, postero-anterior (PA) parallel dual screws had better results in the stress peak, stress distribution, and displacement of talus and internal fixation. CONCLUSIONS: To sum up, the Von Mises stress of fracture section was the smallest, the stress distribution of screws were the most scattered, and the peak value was the smallest in posterior to anterior parallel double screws fixation, which was obviously better than that in the other three groups. When using screws internal fixation, the method of posterior to anterior screws fixation is better than that of anterior to posterior screws fixation, and the peak value and stress distribution of parallel double screws fixation is better than that of cross double screws fixation. Thus, for the talar neck fracture, the use of posterior to anterior parallel double screws fixation is recommended in clinical surgery.

Finite element analysis of two cephalomedullary nails in treatment of elderly reverse obliquity intertrochanteric fractures: zimmer natural nail and proximal femoral nail antirotation-ΙΙ.

BACKGROUND: More elderly patients are suffering from intertrochanteric fractures. However, the choice of internal fixation is still controversial, especially in the treatment of unstable intertrochanteric fracture; thus, previous implants continue to be improved, and new ones are being developed. The purpose of our study was to compare the biomechanical advantages between the zimmer natural nail (ZNN) and proximal femoral nail antirotation-II (PFNA-II) in the treatment of elderly reverse obliquity intertrochanteric fractures. METHODS: A three-dimensional finite element was applied for reverse obliquity intertrochanteric fracture models (AO31-A3.1) fixed with the ZNN or PFNA-II. The distribution, peak value and position of the von Mises stress and the displacement were the criteria for comparison between the two groups. RESULTS: The stresses of the internal fixation and femur in the ZNN model were smaller than those in the PFNA-II model, and the peak values of the two groups were 364.8 MPa and 171.8 MPa (ZNN) and 832.3 MPa and 1795.0 MPa (PFNA-II). The maximum amount of displacement of the two groups was similar, and their locations were the same, i.e., in the femoral head vertex (3.768 mm in the ZNN model and 3.713 mm in the PFNA-II model). CONCLUSIONS: The displacement in the two models was similar, but the stresses in the implant and bone were reduced with the ZNN. Therefore, the ZNN implant may provide biomechanical advantages over PFNA-II in reverse obliquity intertrochanteric fractures, as shown through the finite element analysis. These findings from our study may provide a reference for the perioperative selection of internal fixations.

Custom-made Prosthesis for Reconstruction after Radical Resection for Chondrosarcoma of Manubrium.

The clinical incidence of tumors in the manubrium is not high. Regardless of whether the tumor is primary or metastatic, the tumor should be completely removed as long as the patient is able to tolerate the surgery. This procedure can lead to sternal defects. Deciding on the method of defect reconstruction is a critical problem that clinicians face. In this , to reduce the limitations of the patient's upper body movement after surgery due to the inflexibility in the connections of the sternal prosthesis, we created a prosthesis using a computer-assisted design method and a 3-D technique, to completely preserve the agility of the sternum and maximize the patient's post-operational movement. The method used in the present study takes into consideration the individual's chest anatomy, sternum stress, and many other biological characteristics. Care is taken to measure the sternum size accurately, to provide personalized treatment, to accomplish precise results, and to reduce potential future damage. The patient's shoulder function was improved following the procedure.

The efficacy of dexamethasone on pain and recovery after total hip arthroplasty: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Total hip arthroplasty (THA) perioperative dexamethasone treatment is still a controversial subject. We write this systematic review and meta-analysis to evaluate the efficacy of dexamethasone on pain and recovery after THA. METHODS: Two researchers searched the relevant studies from Pubmed, Cochrane, and Embase. The research was reported according to the preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines. Randomized controlled trials (RCTs) were included in our meta-analysis. At the same time, the assessment of the risk of bias was conducted according to the Cochrane Handbook for Systematic Reviews of Interventions version. The pooled data are processed by software RevMan 5.3. RESULT: In accordance with inclusion and exclusion, 3 studies with 207 patients were eligible and accepted into this meta-analysis. For RCTs, the risk of bias was evaluated by Cochrane Collaboration tool. Only one study did not have detection bias. Our study demonstrated that the dexamethasone group was more effective than the placebo group in term of visual analogue scale (VAS) score at 24 hours (P < .001), 48 hours (P = .04); opioid consumption (P < .001); length of stay (LOS, P < .001); and postoperative nausea (P = .001). CONCLUSION: Dexamethasone not only reduces postoperative pain scores and postoperative opioids consumption within 48 hours, but also reduces postoperative vomiting and effectively reduces LOS. However, we still need large sample size and high quality studies to explore the relationship between complications and dose response to give the final conclusion.

Bone Microarchitecture and Biomechanics of the Necrotic Femoral Head.

The mechanism behind osteonecrosis of the femoral head (ONFH) remains unclear. The aim of this study was to explore the pathogenesis of ONFH from a biomechanical standpoint to provide a theoretical basis for improved treatments. We compared the bone structure of fractured femoral heads with that of necrotic femoral heads by Micro-CT scanning and histological evaluation. In addition, we compared the biomechanical properties of each zone in fractured femoral heads with those in necrotic femoral heads by using biomechanical tests. Compared with fractured femoral heads, bone microarchitecture and bone morphometry in necrotic zone and sclerotic zone of necrotic femoral heads have altered markedly. In addition, the biomechanical properties of the necrotic zone in femoral heads weaken markedly, while those of the sclerotic zone strengthen. We hypothesize that discordance between bone structure and function of the femoral head may be involved in the pathogenesis of ONFH and that more attention should be paid to the prevention and treatment of such discordance.

TET3 Mediates Alterations in the Epigenetic Marker 5hmC and Akt pathway in Steroid-Associated Osteonecrosis.

Steroid-associated osteonecrosis (SAON) is one of the common complications of clinical glucocorticoid (GC) administration, with osteocyte apoptosis appearing as the primary histopathological lesion. However, the precise mechanism underlying SAON remains unknown. Epigenetic modification may be a major cause of SAON. Recently, cumulative research revealed that Ten-Eleven Translocation (TET) proteins can catalyze the conversion of 5-methylcytosine (5mC) to 5-hydroxymethylcytosine (5hmC) and then alter the epigenetic state of DNA. Here, we report that TET3-5hmC was upregulated in the femoral head tissues of SAON patients and MLO-Y4 cells with dexamethasone (Dex) treatment. Knockdown of TET3 in MLO-Y4 cells decreased 5hmC enrichment and rescued Dex-induced apoptosis. Meanwhile, the local intramedullary injection of TET3 siRNA in Sprague-Dawley rats abrogated GC-induced osteocyte apoptosis, histopathological changes, abnormal MRI signals, and bone microstructure declines in the femoral head in vivo. Moreover, a hydroxymethylated DNA immunoprecipitation (hMeDIP)-chip analysis of Dex-treated osteocytes revealed 456 different 5hmC-enriched genes. The Akt pathway was found to mediate the functional effect of Dex-induced dynamic 5hmC change; this was further verified in clinical samples. The loss of TET3 in MLO-Y4 cells abrogated Dex-induced Akt signaling pathway inhibition. Therefore, our data for the first time identify the effect of TET3-5hmC on the Akt pathway and the necessity of this signaling cascade in SAON, identifying a new potential therapeutic target. © 2016 American Society for Bone and Mineral Research.