Performance enhancement of carbon nanotube thin film transistor by yttrium oxide capping.

Carbon nanotube thin film transistors (CNT-TFTs) are regarded as promising technology for active matrix pixel driving circuits of future flat panel displays (FPD). For FPD application, unipolar thin film transistors (TFTs) with high mobility (µ), high on-state current (ION), low off-current (IOFF) at high source/drain bias and small hysteresis are required simultaneously. Though excellent values of those performance metrics have been realized individually in different reports, the overall performance of previously reported CNT-TFTs has not met the above requirements. In this paper, we found that yttrium oxide (Y2O3) capping is helpful in improving both ION and µ of CNT-TFTs. Combining Y2O3 capping and Al2O3 passivation, unipolar CNT-TFTs with high ION/IOFF (>107) and low IOFF (∼pA) at -10.1 V source/drain bias, and relatively small hysteresis in the range of -30 V to +30 V gate voltage were achieved, which are capable of active matrix display driving.

Ultraviolet/ozone and oxygen plasma treatments for improving the contact of carbon nanotube thin film transistors.

Carbon nanotube thin film transistor (CNT-TFT) is an emerging technology for future macroelectronics, such as chemical and biological sensors, optical detectors, and the backplane driving circuits for flat panel displays. The mostly reported fabrication method of CNT-TFT is a lift-off based photolithography process. In such fabrication process, photoresist (PR) residue contaminates the interface of tube-metal contact and deteriorates the device performance. In this paper, ultraviolet ozone (UVO) and oxygen plasma treatments were employed to remove the PR contamination. Through our well-designed experiments, the UVO treatment is confirmed an effective way of cleaning contamination at the tube-metal interface, while oxygen plasma treatment is too reactive and hard to control, which is not appropriate for CNT-TFTs. It is determined that 2-6 min UVO treatment is the preferred window, and the best optimized treatment time is 4 min, which leads to 15% enhancement of device performance.

Association of α2-HS Glycoprotein with Neurogenic Heterotopic Ossification in Patients with Spinal Cord Injury.

BACKGROUND The aim of this study was to explore the relationship between the α2-HS glycoprotein concentrations in serum and the occurrence of neurogenic heterotopic ossification (NHO) in patients with spinal cord injury (SCI). MATERIAL AND METHODS During the period between January 2011 and January 2012, 75 patients (67 male) with paraplegia caused by spinal cord injury were enrolled. The patients were divided into 2 groups in accordance with the occurrence of heterotopic ossification based on the results high-frequency ultrasound on the bilateral hip joint. The levels of α2-HS glycoprotein, C-reactive protein (CRP), D-dimer, and bone morphogenetic protein (BMP) were detected by ELISA. RESULTS We found a significant decrease of α2-HS glycoprotein in SCI patients with NHO compared to SCI patients without NHO. In contrast, a significant elevation of serum calcium, D-dimer, BMP, and CRP was observed in SCI patients with NHO. The degree of maturity of NHO did not influence the level of α2-HS glycoprotein. Multivariate liner regression analysis showed that the level of serum α2-HS glycoprotein was correlated with CRP and spasticity. CONCLUSIONS The decreased level of α2-HS glycoprotein may be related to the formation of neurogenic heterotopic ossification in patients with spinal cord injury. Our results suggest that α2-HS glycoprotein might be a risk factor for NHO in patients with SCI.

Carbon nanotube thin film transistors fabricated by an etching based manufacturing compatible process.

Carbon nanotube thin film transistors (CNT-TFTs) have been regarded as strong competitors to currently commercialized TFT technologies. Though much progress has been achieved recently, CNT-TFT research is still in the stage of laboratory research. One critical challenge for commercializing CNT-TFT technology is that the commonly used device fabrication method is a lift-off based process, which is not suitable for mass production. In this paper, we report an etching based fabrication process for CNT-TFTs, which is fully manufacturing compatible. In our process, the CNT thin film channel was patterned by dry etching, while wet etching was used for patterning the layers of metal and insulator. The CNT-TFTs were successfully fabricated on a 4 inch wafer in both top-gate and buried-gate geometries with low Schottky barrier contact and pretty uniform performance. High output current (>1.2 µA µm-1), high on/off current ratio (>105) and high mobility (>30 cm2 V-1 s-1) were obtained. Though the fabrication process still needs to be optimized, we believe our research on the etching fabrication process pushes CNT-TFT technology a step forward towards real applications in the near future.

Association between SLC11A1 (NRAMP1) polymorphisms and susceptibility to tuberculosis in Chinese Holstein cattle.

We investigated the associations between SLC11A1 polymorphisms and susceptibility to tuberculosis (TB) in Chinese Holstein cattle, using a case-control study of 136 animals that had positive reactions to TB tests and showed symptoms and 96 animals that had negative reactions to tests and showed no symptoms. Polymerase chain reaction (PCR) sequencing and the restriction fragment length polymorphism (RFLP) technique were used to detect and determine SLC11A1 polymorphisms. Association analysis identified significant correlations between SLC11A1 polymorphisms and susceptibility/resistance to TB, and two genetic markers for SLC11A1 were established using PCR-RFLP. Sequence alignment of SLC11A1 revealed seven single-nucleotide polymorphisms (SNPs). This is the first report of MaeII PCR-RFLP markers for the SLC11A1-SNP3 site and PstI PCR-RFLP markers for the SLC11A1-SNP5 and SLC11A1-SNP6 sites in Chinese Holstein cattle. Logistic regression analysis indicated that SLC11A1-SNP1, SLC11A1-SNP3, and SLC11A1-SNP5 were significantly associated with susceptibility/resistance to TB. Two genotypes of SLC11A1-SNP3 were susceptible to TB, whereas one genotype of SLC11A1-SNP1 and two genotypes of SLC11A1-SNP5 were resistant. Haplotype analysis showed that nine haplotypes were potentially resistant to TB. After Bonferroni correction, three of the haplotypes remained significantly associated with TB resistance. SLC11A1 is a useful candidate gene related to TB in Chinese Holstein cattle.

Carbon Nanotube Thin Film Transistors for Flat Panel Display Application.

Carbon nanotubes (CNTs) are promising materials for both high performance transistors for high speed computing and thin film transistors for macroelectronics, which can provide more functions at low cost. Among macroelectronics applications, carbon nanotube thin film transistors (CNT-TFT) are expected to be used soon for backplanes in flat panel displays (FPDs) due to their superior performance. In this paper, we review the challenges of CNT-TFT technology for FPD applications. The device performance of state-of-the-art CNT-TFTs are compared with the requirements of TFTs for FPDs. Compatibility of the fabrication processes of CNT-TFTs and current TFT technologies are critically examined. Though CNT-TFT technology is not yet ready for backplane production line of FPDs, the challenges can be overcome by close collaboration between research institutes and FPD manufacturers in the short term.

Metal contact effect on the performance and scaling behavior of carbon nanotube thin film transistors.

Metal-tube contact is known to play an important role in carbon nanotube field-effect transistors (CNT-FETs) which are fabricated on individual CNTs. Less attention has been paid to the contact effect in network type carbon nanotube thin film transistors (CNT-TFTs). In this study, we demonstrate that contact plays an even more important role in CNT-TFTs than in CNT-FETs. Although the Schottky barrier height at the metal-tube contact can be tuned by the work function of the metal, similar to the case in CNT-FETs, the contact resistance (Rc) forms a much higher proportion of the total resistance in CNT-TFTs. Interestingly, the contact resistivity was found to increase with channel length, which is a consequence of the percolating nature of the transport in CNT films, and this behavior does not exist in CNT-FETs and normal 2D Ohmic conductors. Electrical transport in CNT-TFTs has been predicted to scale with channel length by stick percolation theory. However, the scaling behavior is also impacted, or even covered up by the effect of Rc. Once the contact effect is excluded, the covered scaling behavior can be revealed correctly. A possible way of reducing Rc in CNT-TFTs was proposed. We believe the findings in this paper will strengthen our understanding of CNT-TFTs, and even accelerate the commercialization of CNT-TFT technology.

CARD15 Gene Polymorphisms Are Associated with Tuberculosis Susceptibility in Chinese Holstein Cows.

Bovine tuberculosis (BTB) is a significant veterinary and financial problem in many parts of the world. Associations between specific host genes and susceptibility to mycobacterial infections, such as tuberculosis, have been reported in several species. The objective of this study was to identify and evaluate the relationship of single-nucleotide polymorphisms (SNPs) in the CARD15 gene with susceptibility to BTB in Chinese Holstein cows. DNA samples from 201 Chinese Holstein cows (103 cases and 98 controls) were collected from Kunming City, Yuxi City, and Dali City in China. SNPs in the CARD15 gene were assessed using polymerase chain reaction (PCR) and restriction fragment length polymorphism-polymerase chain reaction (RFLP-PCR). Case-control association testing and statistical analysis identified six SNPs associated with susceptibility to BTB in Chinese Holstein cows. The frequency of genotypes C/T, A/G, A/G, A/G, C/T, and A/G in E4 (-37), 208, 1644, 1648, 1799, and E10 (+107), respectively, was significantly higher in cases than in controls, and also the alleles C, A, A, G, T, and A, respectively, were associated with a greater relative risk in cases than in controls. The distribution of two haplotypes, TGGACA and CAGACA, was significantly different between cases and controls. Overall, this case-control study suggested that E4 (-37)(C/T), 208(A/G), 1644(A/G), 1648(A/G), 1799(C/T), and E10 (+107)(A/G) in the CARD15 gene were significantly associated with susceptibility to BTB in Chinese Holstein cows and that haplotypes TGGACA and CAGACA could be used as genetic markers in marker-assisted breeding programs for breeding cows with high resistance to BTB.

Elimination of schistosomiasis japonica from formerly endemic areas in mountainous regions of southern China using a praziquantel regimen.

Schistosomiasis japonica is a major public health problem in China. Domestic animals play a major role in the transmission of Schistosoma japonicum to humans. To better understand the epidemiology of schistosomiasis japonica in domestic animals in the mountainous areas of China, we performed a 5-year longitudinal study of schistosomiasis in cattle and horses in Yunnan Province from 2009 to 2013. We also performed a concurrent drug-based intervention study in three settlement groups in Yunnan Province aimed at developing an effective means of controlling transmission in this region. The prevalence of infection in cattle fluctuated between 1.67% and 3.05% from 2009 to 2011, and monthly treatments of schistosome-positive animals reduced the prevalence to 0% (P<0.05) from 2012 to 2013. Prior to the intervention, we found that schistosomiasis was prevalent from May to October, with the highest prevalence observed in June (10.00%). We surveyed for environmental schistosome contamination, and 94.29% of the miracidia found were from cattle. Our study showed that it is possible to eliminate schistosomiasis in domestic animals in the mountainous regions of China by monthly treating cattle and horses from schistosome-positive households from May to October.

[Longitudinal observation of epidemic dynamics of schistosomiasis in bovine in two mountainous endemic regions].

OBJECTIVE: To understand the endemic situation dynamics of schistosomiasis in domestic animals (mainly bovine) in mountainous endemic regions, so as to provide the reference for evaluating the control effect and improving control strategy. METHODS: Two representative pilots (Renmei and Dacang) in mountainous schistosomiasis endemic regions were selected for survey. The schistosome infection status of bovine was investigated by the miracidium hatching method, the pasture of bovine were investigated by home visiting, and the distributions of wild feces and Oncomelania snails, and the snail schistosome infection status were also investigated in April and September every year. RESULTS: The schistosome infection rates of bovine reduced by 98.4% and 93.8% in two pilots in 2007 compared with those in 1993, and the infection intensities also showed a decline trend. The infection rate of wild faces was 0 in Renmei pilot since 1995, while in Dacang pilot, the infection rate of wild feces fluctuated in 2007, and the intensities of living snails and infected snails showed a declined trend. CONCLUSIONS: Due to the special natural environment of mountainous endemic regions, there is a dot-like or band-like distribution of endemic areas. The strengthening of schistosomiasis examination and chemotherapy will rapidly reduce endemic situation. However, to completely interrupt the transmission of schistosomiasis, we should emphasize environmental modification and domestic animal management.