Extent of Radiolytic Damage from Liquid Cell TEM Experiments on Metal-Organic Frameworks via Post-Mortem 4D-STEM.

We report a systematic analysis of electron beam damage of the zeolitic imidazolate framework (ZIF-8) during liquid cell transmission electron microscopy (LCTEM). Our analysis reveals ZIF-8 morphology is strongly affected by solvent used (water vs dimethylformamide), electron flux applied, and imaging mode (i.e., TEM vs STEM), while ZIF-8 crystallinity is primarily affected by accumulated electron fluence. Our observations indicate that the stability of ZIF-8 morphology is higher in dimethylformamide (DMF) than in water. However, in situ electron diffraction indicates that ZIF-8 nanocrystals lose crystallinity at critical fluence of ∼80 e-Å-2 independent of the presence of solvent. Furthermore, 4D-STEM analysis as a post-mortem method reveals the extent of electron beam damage beyond the imaging area and indicates that radiolytic reactions are more pronounced in TEM mode than in STEM mode. These results illustrate the significance of radiolysis occurring while imaging ZIF-8 and present a workflow for assessing damage in LCTEM experiments.

Paradoxical Reaction in Intraocular Tuberculosis: Report of Three Cases.

PURPOSE: To present paradoxical reaction (PR) in three cases with ocular tuberculosis (OTB) treated with antitubercular therapy (ATT), highlighting diagnostic challenges and treatment strategies. METHODS: We retrospectively reviewed clinical records of three OTB patients presenting with paradoxical worsening after ATT initiation at two Brazilian university hospitals. RESULTS: The patients (2 males, 1 female) experienced worsening clinical presentation (increased inflammation, vision loss) within two to three weeks after initiating ATT. One patient who was HIV-positive with unilateral multifocal choroiditis developed PR soon after starting antiretroviral therapy. The second patient presented with a choroidal tuberculoma in both eyes. The third patient also had multifocal choroiditis and developed a localized choroidal elevation with a double-layer sign as a manifestation of PR. All patients were maintained on ATT therapy in association with corticosteroids and experienced improvement of inflammatory signs. CONCLUSION: This case series highlights the potential for PR in OTB patients. Close monitoring and prompt therapeutic adjustments are crucial for management success.

Machine Learning-Enabled Image Classification for Automated Electron Microscopy.

Traditionally, materials discovery has been driven more by evidence and intuition than by systematic design. However, the advent of "big data" and an exponential increase in computational power have reshaped the landscape. Today, we use simulations, artificial intelligence (AI), and machine learning (ML) to predict materials characteristics, which dramatically accelerates the discovery of novel materials. For instance, combinatorial megalibraries, where millions of distinct nanoparticles are created on a single chip, have spurred the need for automated characterization tools. This paper presents an ML model specifically developed to perform real-time binary classification of grayscale high-angle annular dark-field images of nanoparticles sourced from these megalibraries. Given the high costs associated with downstream processing errors, a primary requirement for our model was to minimize false positives while maintaining efficacy on unseen images. We elaborate on the computational challenges and our solutions, including managing memory constraints, optimizing training time, and utilizing Neural Architecture Search tools. The final model outperformed our expectations, achieving over 95% precision and a weighted F-score of more than 90% on our test data set. This paper discusses the development, challenges, and successful outcomes of this significant advancement in the application of AI and ML to materials discovery.

Implications and Optimization of Domain Structures in IV-VI High-Entropy Thermoelectric Materials.

High-entropy semiconductors are now an important class of materials widely investigated for thermoelectric applications. Understanding the impact of chemical and structural heterogeneity on transport properties in these compositionally complex systems is essential for thermoelectric design. In this work, we uncover the polar domain structures in the high-entropy PbGeSnSe1.5Te1.5 system and assess their impact on thermoelectric properties. We found that polar domains induced by crystal symmetry breaking give rise to well-structured alternating strain fields. These fields effectively disrupt phonon propagation and suppress the thermal conductivity. We demonstrate that the polar domain structures can be modulated by tuning crystal symmetry through entropy engineering in PbGeSnAgxSbxSe1.5+xTe1.5+x. Incremental increases in the entropy enhance the crystal symmetry of the system, which suppresses domain formation and loses its efficacy in suppressing phonon propagation. As a result, the room-temperature lattice thermal conductivity increases from κL = 0.63 Wm-1 K-1 (x = 0) to 0.79 Wm-1 K-1 (x = 0.10). In the meantime, the increase in crystal symmetry, however, leads to enhanced valley degeneracy and improves the weighted mobility from µw = 29.6 cm2 V-1 s-1 (x = 0) to 35.8 cm2 V-1 s-1 (x = 0.10). As such, optimal thermoelectric performance can be achieved through entropy engineering by balancing weighted mobility and lattice thermal conductivity. This work, for the first time, studies the impact of polar domain structures on thermoelectric properties, and the developed understanding of the intricate interplay between crystal symmetry, polar domains, and transport properties, along with the impact of entropy control, provides valuable insights into designing GeTe-based high-entropy thermoelectrics.

Influence of Composition and Structure on the Optoelectronic Properties of Photocatalytic Bi4NbO8Cl-Bi2GdO4Cl Intergrowths.

Mixed metal oxyhalides are an exciting class of photocatalysts, capable of the sustainable generation of fuels and remediation of pollutants with solar energy. Bismuth oxyhalides of the types Bi4MO8X (M = Nb and Ta; X = Cl and Br) and Bi2AO4X (A = most lanthanides; X = Cl, Br, and I) have an electronic structure that imparts photostability, as their valence band maxima (VBM) are composed of O 2p orbitals rather than X np orbitals that typify many other bismuth oxyhalides. Here, flux-based synthesis of intergrowth Bi4NbO8Cl-Bi2GdO4Cl is reported, testing the hypothesis that both intergrowth stoichiometry and M identity serve as levers toward tunable optoelectronic properties. X-ray scattering and atomically resolved electron microscopy verify intergrowth formation. Facile manipulation of the Bi4NbO8Cl-to-Bi2GdO4Cl ratio is achieved with the specific ratio influencing both the crystal and electronic structures of the intergrowths. This compositional flexibility and crystal structure engineering can be leveraged for photocatalytic applications, with comparisons to the previously reported Bi4TaO8Cl-Bi2GdO4Cl intergrowth revealing how subtle structural and compositional features can impact photocatalytic materials.

Probing Structural Transformations and Degradation Mechanisms by Direct Observation in SIFSIX-3-Ni for Direct Air Capture.

Despite global efforts to reduce carbon dioxide (CO2) emissions, continued industrialization threatens to exacerbate climate change. This work investigates methods to capture CO2, with a focus on the SIFSIX-3-Ni metal-organic framework (MOF) as a direct air capture (DAC) sorbent. SIFSIX-3-Ni exhibits promising CO2 adsorption properties but suffers from degradation processes under accelerated aging, which are akin to column regeneration conditions. Herein, we have grown the largest SIFSIX-3-Ni single crystals to date, facilitating single crystal X-ray diffraction analyses that enabled direct observation of the H2O and CO2 dynamics through adsorption and desorption. In addition, a novel space group (I4/mcm) for the SIFSIX-3-Ni is identified, which provided insights into structural transitions within the framework and elucidated water's role in degrading CO2 uptake performance as the material ages. In situ X-ray scattering methods revealed long-range and local structural transformations associated with CO2 adsorption in the framework pores as well as a temperature-dependent desorption mechanism. Pair distribution function analysis revealed a partial decomposition to form nonporous single-layer nanosheets of edge-sharing nickel oxide octahedra upon aging. The formation of these nanosheets is irreversible and reduces the amount of active material for the CO2 sorption. These findings provide crucial insights for the development of efficient and stable DAC sorbents, effectively reducing greenhouse gases, and suggest avenues for enhancing MOF stability under practical DAC conditions.

Ultrathin silicon nitride microchip for in situ/operando microscopy with high spatial resolution and spectral visibility.

Utilization of in situ/operando methods with broad beams and localized probes has accelerated our understanding of fluid-surface interactions in recent decades. The closed-cell microchips based on silicon nitride (SiNx) are widely used as "nanoscale reactors" inside the high-vacuum electron microscopes. However, the field has been stalled by the high background scattering from encapsulation (typically ~100 nanometers) that severely limits the figures of merit for in situ performance. This adverse effect is particularly notorious for gas cell as the sealing membranes dominate the overall scattering, thereby blurring any meaningful signals and limiting the resolution. Herein, we show that by adopting the back-supporting strategy, encapsulating membrane can be reduced substantially, down to ~10 nanometers while maintaining structural resiliency. The systematic gas cell work demonstrates advantages in figures of merit for hitherto the highest spatial resolution and spectral visibility. Furthermore, this strategy can be broadly adopted into other types of microchips, thus having broader impact beyond the in situ/operando fields.

Predictive improvement of adding coronary calcium score and a genetic risk score to a traditional risk model for cardiovascular event prediction.

AIMS: Coronary artery calcium score (CACS) and polygenic risk score have been used as novel markers to predict cardiovascular (CV) events of asymptomatic individuals compared with traditional scores. No previous studies have directly compared the additive capacity of these two markers relative to conventional scores. The aim of the study was to evaluate the change in CV risk prediction ability when CACS, genetic risk score (GRS), or both are added to Systematic Coronary Risk Evaluation 2 (SCORE2). METHODS AND RESULTS: In a prospective, observational population-based study, 1002 asymptomatic subjects (mean age 53.1 ± 6.8 years, 73.8% male), free of clinical coronary disease and diabetes, were selected from GENEMACOR-study controls. SCORE2, CACS, and GRS were estimated to evaluate CV events' predictive and discriminative ability through Harrell's C-statistics. Net reclassification improvement (NRI) and integrated discrimination index were used to reclassify the population. Multivariable Cox proportional hazard ratio (HR) analysis assessed the variables independently associated with CV events. C-statistic demonstrated that the discriminative value for CV event occurrence was 0.608 for SCORE2, increasing to 0.749 (P = 0.001) when CACS was added, and improved to 0.802 (P = 0.0008) with GRS, showing a better discriminative capacity for CV events. Continuous NRI reclassified >70% of the population. Cox proportional analysis showed that the highest categories of SCORE2, CACS, and GRS remained in the equation with an HR of 2.9 (P = 0.003), 5.0 (P < 0.0001), and 3.2 (P = 0.003), respectively, when compared with the lowest categories. CONCLUSION: In our population, CACS added to SCORE2 had better ability than GRS in CV event risk prediction, discrimination, and reclassification. However, adding the three scores can become clinically relevant, especially in intermediate-risk persons.

Our study highlights the impact of including coronary artery calcium score (CACS) and genetic risk score (GRS) alongside Systematic Coronary Risk Evaluation 2 (SCORE2) for enhancing cardiovascular (CV) risk assessment in primary prevention. In our population, adding CACS to SCORE2 exhibited a superior discriminative capacity for CV events compared with GRS alone in terms of risk prediction, discrimination, and reclassification. Our results emphasize the potential clinical relevance of using all three scores to identify high-risk individuals who would benefit from earlier and more stringent cardiovascular risk management strategies to prevent future cardiovascular events.

Unlocking the mysterious polytypic features within vaterite CaCO3.

Calcium carbonate (CaCO3), the most abundant biogenic mineral on earth, plays a crucial role in various fields such as hydrosphere, biosphere, and climate regulation. Of the four polymorphs, calcite, aragonite, vaterite, and amorphous CaCO3, vaterite is the most enigmatic one due to an ongoing debate regarding its structure that has persisted for nearly a century. In this work, based on systematic transmission electron microscopy characterizations, crystallographic analysis and machine learning aided molecular dynamics simulations with ab initio accuracy, we reveal that vaterite can be regarded as a polytypic structure. The basic phase has a monoclinic lattice possessing pseudohexagonal symmetry. Direct imaging and atomic-scale simulations provide evidence that a single grain of vaterite can contain three orientation variants. Additionally, we find that vaterite undergoes a second-order phase transition with a critical point of ~190 K. These atomic scale insights provide a comprehensive understanding of the structure of vaterite and offer advanced perspectives on the biomineralization process of calcium carbonate.

van der Waals Epitaxy, Superlubricity, and Polarization of the 2D Ferroelectric SnS.

Tin monosulfide (SnS) is a two-dimensional layered semiconductor that exhibits in-plane ferroelectric order at very small thicknesses and is of interest in highly scaled devices. Here we report the epitaxial growth of SnS on hexagonal boron nitride (hBN) using a pulsed metal-organic chemical vapor deposition process. Lattice matching is observed between the SnS(100) and hBN{11̅0} planes, with no evidence of strain. Atomic force microscopy reveals superlubricity along the commensurate direction of the SnS/hBN interface, and first-principles calculations suggest that friction is controlled by the edges of the SnS islands, rather than interface interactions. Differential phase contrast imaging detects remnant polarization in SnS islands with domains that are not dictated by step-edges in the SnS. The growth of ferroelectric SnS on high quality hBN substrates is a promising step toward electrically switchable ferroelectric semiconducting devices.

Design of Electrostatic Aberration Correctors for Scanning Transmission Electron Microscopy.

In a scanning transmission electron microscope (STEM), producing a high-resolution image generally requires an electron beam focused to the smallest point possible. However, the magnetic lenses used to focus the beam are unavoidably imperfect, introducing aberrations that limit resolution. Modern STEMs overcome this by using hardware aberration correctors comprised of many multipole elements, but these devices are complex, expensive, and can be difficult to tune. We demonstrate a design for an electrostatic phase plate that can act as an aberration corrector. The corrector is comprised of annular segments, each of which is an independent two-terminal device that can apply a constant or ramped phase shift to a portion of the electron beam. We show the improvement in image resolution using an electrostatic corrector. Engineering criteria impose that much of the beam within the probe-forming aperture be blocked by support bars, leading to large probe tails for the corrected probe that sample the specimen beyond the central lobe. We also show how this device can be used to create other STEM beam profiles such as vortex beams and probes with a high degree of phase diversity, which improve information transfer in ptychographic reconstructions.

Defect Contrast with 4D-STEM: Understanding Crystalline Order with Virtual Detectors and Beam Modification.

Material properties strongly depend on the nature and concentration of defects. Characterizing these features may require nano- to atomic-scale resolution to establish structure-property relationships. 4D-STEM, a technique where diffraction patterns are acquired at a grid of points on the sample, provides a versatile method for highlighting defects. Computational analysis of the diffraction patterns with virtual detectors produces images that can map material properties. Here, using multislice simulations, we explore different virtual detectors that can be applied to the diffraction patterns that go beyond the binary response functions that are possible using ordinary STEM detectors. Using graphene and lead titanate as model systems, we investigate the application of virtual detectors to study local order and in particular defects. We find that using a small convergence angle with a rotationally varying detector most efficiently highlights defect signals. With experimental graphene data, we demonstrate the effectiveness of these detectors in characterizing atomic features, including vacancies, as suggested in simulations. Phase and amplitude modification of the electron beam provides another process handle to change image contrast in a 4D-STEM experiment. We demonstrate how tailored electron beams can enhance signals from short-range order and how a vortex beam can be used to characterize local symmetry.

Transcription factor 21 gene and prognosis in a coronary population.

INTRODUCTION AND OBJECTIVES: Transcription factor 21 (TCF21) is a member of the basic helix-loop-helix (bHLH) transcription factor family, and is critical for embryogenesis of the heart. It regulates differentiation of epicardium-derived cells into smooth muscle cell (SMC) and fibroblast lineages. The biological role of TCF21 in the progression of atherosclerosis is the subject of debate. The aim of this study was to investigate the impact of the TCF21 rs12190287 gene variant on the prognosis of coronary artery disease (CAD) in a Portuguese population from Madeira island. METHODS: We analyzed major adverse cardiovascular events (MACE) in 1713 CAD patients, mean age 53.3±7.8, 78.7% male, for 5.0±4.3 years. Genotype and allele distribution between groups with and without MACE was determined. The dominant genetic model (heterozygous GC plus homozygous CC) was used and compared with the wild GG to assess survival probability. Cox regression with risk factors and genetic models assessed variables associated with MACE. Kaplan-Meier analysis was used to estimate survival. RESULTS: The wild homozygous GG, heterozygous GC and risk CC genotypes were found in 9.5%, 43.2% and 47.3% of the population, respectively. The dominant genetic model remained in the equation as an independent risk factor for MACE (HR 1.41; p=0.033), together with multivessel disease, chronic kidney disease, low physical activity and type 2 diabetes. The C allele in the dominant genetic model showed worse survival (22.5% vs. 44.3%) at 15 years of follow-up. CONCLUSION: The TCF21 rs12190287 variant is a risk factor for CAD events. This gene may influence fundamental SMC processes in response to vascular stress, accelerating atherosclerosis progression, and may represent a target for future therapies.

Formation mechanism of high-index faceted Pt-Bi alloy nanoparticles by evaporation-induced growth from metal salts.

Nanoparticles with high-index facets are intriguing because such facets can lend the structure useful functionality, including enhanced catalytic performance and wide-ranging optical tunability. Ligand-free solid-state syntheses of high index-facet nanoparticles, through an alloying-dealloying process with foreign volatile metals, are attractive owing to their materials generality and high yields. However, the role of foreign atoms in stabilizing the high-index facets and the dynamic nature of the transformation including the coarsening and facet regulation process are still poorly understood. Herein, the transformation of Pt salts to spherical seeds and then to tetrahexahedra, is studied in situ via gas-cell transmission electron microscopy. The dynamic behaviors of the alloying and dealloying process, which involves the coarsening of nanoparticles and consequent facet regulation stage are captured in the real time with a nanoscale spatial resolution. Based on additional direct evidence obtained using atom probe tomography and density functional theory calculations, the underlying mechanisms of the alloying-dealloying process are uncovered, which will facilitate broader explorations of high-index facet nanoparticle synthesis.

Unraveling the Role of Entropy in Thermoelectrics: Entropy-Stabilized Quintuple Rock Salt PbGeSnCdxTe3+x.

Entropy-engineered materials are garnering considerable attention owing to their excellent mechanical and transport properties, such as their high thermoelectric performance. However, understanding the effect of entropy on thermoelectrics remains a challenge. In this study, we used the PbGeSnCdxTe3+x family as a model system to systematically investigate the impact of entropy engineering on its crystal structure, microstructure evolution, and transport behavior. We observed that PbGeSnTe3 crystallizes in a rhombohedral structure at room temperature with complex domain structures and transforms into a high-temperature cubic structure at ∼373 K. By alloying CdTe with PbGeSnTe3, the increased configurational entropy lowers the phase-transition temperature and stabilizes PbGeSnCdxTe3+x in the cubic structure at room temperature, and the domain structures vanish accordingly. The high-entropy effect results in increased atomic disorder and consequently a low lattice thermal conductivity of 0.76 W m-1 K-1 in the material owing to enhanced phonon scattering. Notably, the increased crystal symmetry is conducive to band convergence, which results in a high-power factor of 22.4 µW cm-1 K-1. As a collective consequence of these factors, a maximum ZT of 1.63 at 875 K and an average ZT of 1.02 in the temperature range of 300-875 K were obtained for PbGeSnCd0.08Te3.08. This study highlights that the high-entropy effect can induce a complex microstructure and band structure evolution in materials, which offers a new route for the search for high-performance thermoelectrics in entropy-engineered materials.