RESUMEN
The porous coordination cage PCC-1 represents a new platform potentially useful for the cellular delivery of drugs with poor cell permeability and solubility. PCC-1 is a metal-organic polyhedron constructed from zinc metal ions and organic ligands through coordination bonds. PCC-1 possesses an internal cavity that is suitable for drug encapsulation. To better understand the biocompatibility of PCC-1 with human cells, the cell entry mechanism, disassembly, and toxicity of the nanocage were investigated. PCC-1 localizes in the nuclei and cytoplasm within minutes upon incubation with cells, independent of endocytosis and cargo, suggesting direct plasma membrane translocation of the nanocage carrying its guest in its internal cavity. Furthermore, the rates of cell entry correlate to extracellular concentrations, indicating that PCC-1 is likely diffusing passively through the membrane despite its relatively large size. Once inside cells, PCC-1 disintegrates into zinc metal ions and ligands over a period of several hours, each component being cleared from cells within 1 day. PCC-1 is relatively safe for cells at low micromolar concentrations but becomes inhibitory to cell proliferation and toxic above a concentration or incubation time threshold. However, cells surviving these conditions can return to homeostasis 3-5 days after exposure. Overall, these findings demonstrate that PCC-1 enters live cells by crossing biological membranes spontaneously. This should prove useful to deliver drugs that lack this capacity on their own, provided that the dosage and exposure time are controlled to avoid toxicity.
Asunto(s)
Sistemas de Liberación de Medicamentos , Internalización del Virus , Humanos , Membrana Celular/metabolismo , Metales/metabolismo , Compuestos Orgánicos/metabolismo , Zinc/metabolismo , Iones/metabolismoRESUMEN
Photo-catalysis by small-molecules is often limited by catalyst degradation and low electron-transfer efficiency. Herein we report a stable N-phenyl-phenothiazine (PTH)-derived porous coordination cage (PCC) as a highly efficient photocatalyst. By the incorporation of the photocatalytic PTH moiety into a PCC, aggregation-induced quenching (AIQ) was shown to be reduced. An improvement in catalyst stability was discovered, ascribed to the synergistic effects of the PTH moieties. The catalyst, operating through a photolytic single-electron transfer, was utilized for photo-catalyzed dehalogenation and borylation. Evaluation of the catalytic mechanism in the borylation reaction showed that the improved performance results from the more efficient formation of the electron donor-acceptor (EDA) complex with the cage. This discovery provides a potential strategy to improve the photophysical properties and stabilities of small-molecule organic photocatalysts via supramolecular chemistry.
RESUMEN
Characterization of the α-zirconium phosphates 1-D2Oh and 1-D2Oh/dr, partially hydrolyzed with D2O, by powder X-ray diffraction, scanning electron microscopy, and multinuclear solid-state NMR techniques led to an unprecedented observation of D3O+ ions located on the surface and stabilized by hydrogen bonds. These ions are formed after the surface phosphate groups have been lost.
Asunto(s)
Fosfatos , Circonio , Iones , Espectroscopía de Resonancia Magnética , Fosfatos/química , Difracción de Rayos X , Circonio/químicaRESUMEN
Nanomedicine with stable light-heat conversion and spatiotemporally controllable drug activation is crucial for the success of photothermal therapy (PTT). Herein, a metal-organic framework (MOF)-based nanoheater with light-triggered multi-responsiveness is engineered to in-situ and on-demand sensitize cancer cells to local hyperthermia. Well-dispersed platinum nanoparticles synthesized inside nanospaces of the MOF are employed as the near-infrared (NIR)-harvesting unit with stable and high light-heat conversion performance. A conformation switchable polymer shell is constructed as a secondary light-responding unit to gate the targeted activation of a molecular inhibitor against thermoresistance. By cascade transformation of light stimuli to downstream signals, the nanoheater enables inhibitor release to go with local heating at the same time restricted in lesion sites to maximize efficacy and minimize systemic toxicity. The efficient photothermal conversion and the blockage of cellular heat-protective pathways provide a dual-mode of action which selectively sensitizes cancer cells to hyperthermia in a spatiotemporally controlled manner. With NIR as the remote switch, the MOF-based nanosystem demonstrates localized and boosted PTT efficacy against cancer both in vitro and in vivo. These results present nanosized MOFs as tailorable and versatile platforms for synergistic and precise cancer therapy.
Asunto(s)
Hipertermia Inducida , Nanopartículas del Metal , Estructuras Metalorgánicas , Nanopartículas , Neoplasias , Nanopartículas del Metal/uso terapéutico , Estructuras Metalorgánicas/farmacología , Neoplasias/terapia , Fototerapia , Platino (Metal) , Nanomedicina Teranóstica/métodosRESUMEN
Energy-efficient capture and release of small gas molecules, particularly carbon dioxide (CO2) and methane (CH4), are of significant interest in academia and industry. Porous materials such as metal-organic frameworks (MOFs) have been extensively studied, as their ultrahigh porosities and tunability enable significant amounts of gas to be adsorbed while also allowing specific applications to be targeted. However, because of the microporous nature of MOFs, the gas adsorption performance is dominated by high uptake capacity at low pressures, limiting their application. Hence, methods involving stimuli-responsive materials, particularly light-induced switchable adsorption (LISA), offer a unique alternative to thermal methods. Here, we report the mechanism of a well-known LISA system, the azobenzene-based material PCN-250, for CO2 and CH4 adsorption. There is a noticeable difference in the LISA effect dependent on the metal cluster involved, with the most significant being PCN-250-Al, where the adsorption can change by 83.1% CH4 and 56.1% CO2 at 298 K and 1 bar and inducing volumetric storage changes of 36.2 and 33.9 cm3/cm3 at 298 K between 5 and 85 bar (CH4) and 2 and 9 bar (CO2), respectively. Using UV light in both single-crystal X-ray diffraction and gas adsorption testing, we show that upon photoirradiation, the framework undergoes a "localized heating" phenomenon comparable to an increase of 130 K for PCN-250-Fe and improves the working capacity. This process functions because of the constrained nature of the ligand, preventing the typical trans-to-cis isomerization observed in free azobenzene. In addition, we observed that the degree of localized heating is highly dependent on the metal cluster involved, with the series of isostructural PCN-250 systems showing variable performance based upon the degree of interaction between the ligand and the metal center.
RESUMEN
High-efficiency photocatalysis in metal-organic frameworks (MOF) and MOF nanosheets (NSs) are often limited by their short-lived charge separation as well as self-quenching. Here, we propose to use the energy-transfer process (EnT) to increase charge separation, thus enhancing the catalytic performance of a series of MOF NSs. With the use of NS, the photocatalyst can also be well isolated to reduce self-quenching. Tetrakis(4-carboxyphenyl) porphyrin (H4 TCPP) and 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) linkers were chosen as the acceptor and donor moieties, respectively. Accounting for the precise spatial design afforded by the MOF NSs, the donor and acceptor moieties could be closely positioned on the NSs, allowing for an efficient EnT process as well as a high degree of site isolation. Two templates, donor-on-acceptor NS and acceptor-on-donor NS catalysts, were successfully synthesized, and the results show that the second one has much enhanced catalytic performances over the first one due to site-isolated active photocatalysts.
RESUMEN
The effect of metal-cluster redox identity on the thermal decarboxylation of a series of isostructural metal-organic frameworks (MOFs) with tetracarboxylate-based ligands and trinuclear µ3-oxo clusters was investigated. The PCN-250 series of MOFs can consist of various metal combinations (Fe3, Fe/Ni, Fe/Mn, Fe/Co, Fe/Zn, Al3, In3, and Sc3). The Fe-based system can undergo a thermally induced reductive decarboxylation, producing a mixed valence cluster with decarboxylated ligand fragments subsequently eliminated to form uniform mesopores. We have extended the analysis to alternative monometallic and bimetallic PCN-250 systems to observe the cluster's effect on the decarboxylation process. Our results suggest that the propensity to undergo decarboxylation is directly related to the cluster redox accessibility, with poorly reducible metals, such as Al, In, and Sc, unable to thermally reduce at the readily accessible temperatures of the Fe-containing system. In contrast, the mixed-metal variants are all reducible. We report improvements in gas adsorption behavior, significantly the uniform increase in the heat of adsorption going from the microporous to hierarchically induced decarboxylated samples. This, along with Fe oxidation state changes from 57Fe Mössbauer spectroscopy, suggests that reduction occurs at the clusters and is essential for mesopore formation. These results provide insight into the thermal behavior of redox-active MOFs and suggest a potential future avenue for generating mesoporosity using controlled cluster redox chemistry.
RESUMEN
Using the redox-active tetrathiafulvalene tetrabenzoate (TTFTB4- ) as the linker, a series of stable and porous rare-earth metal-organic frameworks (RE-MOFs), [RE9 (µ3 -OH)13 (µ3 -O)(H2 O)9 (TTFTB)3 ] (1-RE, where RE=Y, Sm, Gd, Tb, Dy, Ho, and Er) were constructed. The RE9 (µ3 -OH)13 (µ3 -O) (H2 O)9 ](CO2 )12 clusters within 1-RE act as segregated single-molecule magnets (SMMs) displaying slow relaxation. Interestingly, upon oxidation by I2 , the S=0 TTFTB4- linkers of 1-RE were converted into S= 1 / 2 TTFTB.3- radical linkers which introduced exchange-coupling between SMMs and modulated the relaxation. Furthermore, the SMM property can be restored by reduction in N,N-dimethylformamide. These results highlight the advantage of MOFs in the construction of redox-switchable SMMs.
RESUMEN
The controlled synthesis of multicomponent metal-organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN- -responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN- to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN- -detection limit of 0.05â µm, which is much lower than traditional CN- fluorescent sensors (about 0.2â µm).
RESUMEN
Investigations into a thermally generated decarboxylation mechanism for metal site activation and the generation of mesopores in a carboxylate iron-based MOF, PCN-250, have been conducted. PCN-250 exhibits an interesting oxidation state change during thermal treatment under inert atmospheres or vacuum conditions, transitioning from an Fe(iii)3 cluster to a Fe(ii)Fe(iii)2 cluster. To probe this redox event and discern a mechanism of activation, a combination of thermogravimetric analysis, gas sorption, scanning electron microscopy, 57Fe Mössbauer spectroscopy, gas chromatography-mass spectrometry, and X-ray diffraction studies were conducted. The results suggest that the iron-site activation occurs due to ligand decarboxylation above 200 °C. This is also consistent with the generation of a missing cluster mesoporous defect in the framework. The resulting mesoporous PCN-250 maintains high thermal stability, preserving crystallinity after multiple consecutive high-temperature regeneration cycles. Additionally, the thermally reduced PCN-250 shows improvements in the total uptake capacity of methane and CO2.
RESUMEN
Reticular chemistry has been an important guiding principle for the design of metal-organic frameworks (MOFs). This approach utilizes discrete building units (molecules and clusters) that are connected through strong bonds into extended networks assisted by topological considerations. Although the simple design principle of connecting points and lines has proved successful, new design strategies are still needed to further explore the structures and functions of MOFs. Herein, we report the design and synthesis of two mixed-ligand MOFs, [(CH3)2NH2]4[Zn4O]4[Zn(TCPP)]5[BTB]8/3 (PCN-137) and [Zr6(µ3-O)4(µ3-OH)4][TCPP][TBTB]8/3 (PCN-138) (BTB = 1,3,5-benzene(tris)benzoate, TBTB = 4,4',4â³-(2,4,6-trimethylbenzene-1,3,5-triyl)tribenzoate, and TCPP = tetrakis(4-carboxyphenyl)porphyrin) by the stacking of face-sharing Archimedean solids. In these two MOFs, high-symmetrical metal clusters serve as vertices, and tritopic or tetratopic carboxylate ligands function as triangular and square faces, leading to the formation of two kinds of Archimedean solids (rhombicuboctahedron and cuboctahedron). Furthermore, the ordered accumulation of Archimedean solids successfully gives rise to 3D structures through face-sharing, highlighting the polyhedron-based approach for the design and preparation of MOFs. In addition, PCN-138 was utilized as a heterogeneous catalyst toward CO2 photoreduction under visible-light irradiation. This structure shows high photocatalytic activity, which can be attributed to the coexistence of photosensitizing porphyrin fragments and Zr-oxo centers within the PCN-138 scaffold.
RESUMEN
2D metal-organic frameworks (2D-MOFs) have recently emerged as promising materials for gas separations, sensing, conduction, and catalysis. However, the stability of these 2D-MOF catalysts and the tunability over catalytic environments are limited. Herein, it is demonstrated that 2D-MOFs can act as stable and highly accessible catalyst supports by introducing more firmly anchored photosensitizers as bridging ligands. An ultrathin MOF nanosheet-based material, Zr-BTB (BTB = 1,3,5-tris(4-carboxyphenyl)benzene), is initially constructed by connecting Zr6-clusters with the tritopic carboxylate linker. Surface modification of the Zr-BTB structure was realized through the attachment of porphyrin-based carboxylate ligands on the coordinatively unsaturated Zr metal sites in the MOF through strong Zr-carboxylate bond formation. The functionalized MOF nanosheet, namely PCN-134-2D, acts as an efficient photocatalyst for 1O2 generation and artemisinin production. Compared to the 3D analogue (PCN-134-3D), PCN-134-2D allows for fast reaction kinetics due to the enhanced accessibility of the catalytic sites within the structure and facile substrate diffusion. Additionally, PCN-134(Ni)-2D exhibits an exceptional yield of artemisinin, surpassing all reported homo- or heterogeneous photocatalysts for the artemisinin production.
RESUMEN
The incorporation of large π-conjugated ligands into metal-organic frameworks (MOFs) can introduce intriguing photophysical and electrochemical properties into the framework. However, these effects are often hindered by the strong π-π interaction and the low solubility of the arylated ligands. Herein, we report the synthesis of a porous zirconium-based MOF, Zr6(µ3-O)4(µ3-OH)4(OH)6(H2O)6(HCHC) (PCN-136, HCHC = hexakis(4-carboxyphenyl)hexabenzocoronene), which is composed of a hexacarboxylate linker with a π-conjugated hexabenzocoronene moiety. Direct assembly of the Zr4+ metal centers and the HCHC ligands was unsuccessful due to the low solubility and the unfavorable conformation of the arylated HCHC ligand. Therefore, PCN-136 was obtained from aromatization-driven postsynthetic annulation of the hexaphenylbenzene fragment in a preformed framework (pbz-MOF-1) to avoid π-π stacking. This postsynthetic modification was done through a single-crystal-to-single-crystal transformation and was clearly observable utilizing single -crystal X-ray crystallography. The formation of large π-conjugated systems on the organic linker dramatically enhanced the photoresponsive properties of PCN-136. With isolated hexabenzocoronene moieties as photosensitizers and Zr-oxo clusters as catalytic sites, PCN-136 was employed as an inherent photocatalytic system for CO2 reduction under visible-light irradiation, which showed increased activity compared with pbz-MOF-1.
RESUMEN
In recent years, metal-organic frameworks (MOFs) have been regarded as one of the most important classes of materials. The combination of various metal clusters and ligands, arranged in a vast array of geometries has led to an ever-expanding MOF family. Each year, new and novel MOF structures are discovered. The structural diversity present in MOFs has significantly expanded the application of these new materials. MOFs show great potential for a variety of applications, including but not limited to: gas storage and separation, catalysis, biomedicine delivery, and chemical sensing. This review intends to offer a short summary of some of the most important topics and recent development in MOFs. The scope of this review shall cover the fundamental aspects concerning the design and synthesis of MOFs and range to the practical applications regarding their stability and derivative structures. Emerging trends of MOF development will also be discussed. These trends shall include multicomponent MOFs, defect development in MOFs, and MOF composites. The ever important structure-property-application relationship for MOFs will also be investigated. Overall, this review provides insight into both existing structures and emerging aspects of MOFs.
RESUMEN
Heterometallic metal-organic frameworks (MOFs) allow the precise placement of various metals at atomic precision within a porous framework. This new level of control by MOFs promises fascinating advances in basic science and application. However, the rational design and synthesis of heterometallic MOFs remains a challenge due to the complexity of the heterometallic systems. Herein, we show that bimetallic MOFs with MX2 (INA)4 moieties (INA=isonicotinate; M=Co2+ or Fe2+ ; X=OH- , Cl- , Br- , I- , NCS- , or NCSe- ) can be generated by the sequential modification of a Zr-based MOF. This multi-step modification not only replaced the linear organic linker with a square planar MX2 (INA)4 unit, but also altered the symmetry, unit cell, and topology of the parent structure. Single-crystal to single-crystal transformation is realized so that snapshots for transition process were captured by successive single-crystal X-ray diffraction. Furthermore, the installation of Co(NCS)2 (INA)4 endows field-induced slow magnetic relaxation property to the diamagnetic Zr-MOF.
RESUMEN
Metal-organic frameworks (MOFs) provide highly designable platforms to construct complex coordination architectures for targeted applications. Herein, we demonstrate that trans-coordinated metal centers with exposed equatorial positions can be placed in a MOF matrix. A Zr-based MOF, namely, PCN-160, was initially synthesized as a scaffold structure. Postsynthetic linker labilization was subsequently implemented to partially remove the original dicarboxylate linkers and incorporate pyridinecarboxylates. A pair of neighboring pyridyl groups was arranged at proper proximity within the framework to form trans-binding sites that accommodate different metal cations including Mn2+, Fe2+, Co2+, Ni2+, Cu2+, and Pd2+. Furthermore, the trans-coordinated Ni2+ sites in porous frameworks can be readily accessed by substrates along the equatorial plane, facilitating the catalysis as manifested by the superior activity in ethylene dimerization over that observed for a cis-chelated catalyst.
RESUMEN
The centrosymmetric title complex, [µ-ethane-1,2-diylbis(di-phenyl-phosphane)-κ2P:P']bis-[penta-carbonyl-tungsten(0)], [W2(C26H24P2)(CO)10], consists of two W(CO)5 moieties bridged by a bis-(di-phenyl-phosphan-yl)ethane (dppe) ligand. The W0 atom has a slightly distorted octa-hedral coordination environment consisting of 5 carbonyl ligands and one P atom from the bridging dppe ligand with the nearest W0 atom 5.625â (5)â Å away. The complex resides on a center of symmetry.