RESUMEN
Here, we report on the conceptual design, the hardware realization, and the first experimental results of a novel and compact x-ray polarimeter capable of a single-pulse linear polarization angle detection in the extreme ultraviolet photon energy range. The polarimeter is tested by performing time resolved pump-probe experiments on a Ni80Fe20 Permalloy film at the M2,3 Ni edge at an externally seeded free-electron laser source. Comparison with similar experiments reported in the literature shows the advantages of our approach also in view of future experiments.
RESUMEN
The photoionization dynamics of OsO4 and RuO4, chosen as model systems of small-size mononuclear heavy-metal complexes, has been theoretically studied by the time-dependent density functional theory (TDDFT). Accurate experimental measurements of photoionization dynamics as a benchmarking test for the theory are reported for the photoelectron asymmetry parameters of outer valence ionizations of OsO4, measured in the 17-90 eV photon energy range. The theoretical results are in good agreement with the available experimental data. The observed dynamical behavior of partial cross sections and asymmetry parameters has been related to both the coupling to the continuum of discrete excited states, giving strong modulations in the photon energy dependency, and the atomic composition of the initial ionized states, which determines the rate of decay of ionization probability for increasing excitation energies. Overall, an extensive analysis of the photoionization dynamics for valence and core orbitals is presented, showing good agreement with all the available experimental data. This provides confidence for the validity of the TDDFT approach in describing photoionization of heavy transition element compounds, with the perspective of being used for larger systems. Further experimental work is suggested for RuO4 to gather evidence of the sensitivity of the theoretical method to the nature of the metal atom.
RESUMEN
The valence and core-level photoelectron spectra of gaseous indole, 2,3-dihydro-7-azaindole, and 3-formylindole have been investigated using VUV and soft X-ray radiation supported by both an ab initio electron propagator and density functional theory calculations. Three methods were used to calculate the outer valence band photoemission spectra: outer valence Green function, partial third order, and renormalized partial third order. While all gave an acceptable description of the valence spectra, the last method yielded very accurate agreement, especially for indole and 3-formylindole. The carbon, nitrogen, and oxygen 1s core-level spectra of these heterocycles were measured and assigned. The double ionization appearance potential for indole has been determined to be 21.8 ± 0.2 eV by C 1s and N 1s Auger photoelectron spectroscopy. Theoretical analysis identifies the doubly ionized states as a band consisting of two overlapping singlet states and one triplet state with dominant configurations corresponding to holes in the two uppermost molecular orbitals. One of the singlet states and the triplet state can be described as consisting largely of a single configuration, but other doubly ionized states are heavily mixed by configuration interactions. This work provides full assignment of the relative binding energies of the core level features and an analysis of the electronic structure of substituted indoles in comparison with the parent indole.
RESUMEN
Time resolution is one of the most severe limitations of scanning probe microscopies (SPMs), since the typical image acquisition times are in the order of several seconds or even few minutes. As a consequence, the characterization of dynamical processes occurring at surfaces (e.g. surface diffusion, film growth, self-assembly and chemical reactions) cannot be thoroughly addressed by conventional SPMs. To overcome this limitation, several years ago we developed a first prototype of the FAST module, an add-on instrument capable of driving a commercial scanning tunneling microscope (STM) at and beyond video rate frequencies. Here we report on a fully redesigned version of the FAST module, featuring improved performance and user experience, which can be used both with STMs and atomic force microscopes (AFMs), and offers additional capabilities such as an atom tracking mode. All the new features of the FAST module, including portability between different commercial instruments, are described in detail and practically demonstrated.
RESUMEN
Crown ethers, assembled into a regular 2D array via a chemical guest-host recognition process, have been successfully employed to trap sodium atoms on a surface, under ultra-high vacuum conditions.
RESUMEN
Single adatoms are expected to participate in many processes occurring at solid surfaces, such as the growth of graphene on metals. We demonstrate, both experimentally and theoretically, the catalytic role played by single metal adatoms during the technologically relevant process of graphene growth on nickel (Ni). The catalytic action of individual Ni atoms at the edges of a growing graphene flake was directly captured by scanning tunneling microscopy imaging at the millisecond time scale, while force field molecular dynamics and density functional theory calculations rationalize the experimental observations. Our results unveil the mechanism governing the activity of a single-atom catalyst at work.
RESUMEN
A regular 2D array of crown molecules, which would spontaneously self-assemble into disordered molecular clusters, is obtained by exploiting a guest-host process, based on the chemical affinity between amino and carboxylic groups on a gold surface. First a carboxylic organic template is formed, which then serves as a host for amino-functionalized crown molecules. The amino-carboxylic interaction thereby drives the formation of a monolayer of guest molecules, regularly distributed at the nanometer scale, preventing their aggregation in unordered clusters observed on a bare gold surface. This method, which can be applied to other guest molecules, represents a novel route to overcome the shape-matching requirements of the standard guest-host architectures. Furthermore, it is intrinsically selective, due to the chemical nature of the anchoring process.
RESUMEN
The original version of this Article contained an error in the spelling of the author Claus Michael Schneider, which was incorrectly given as Claus Michael Schneidery. This has now been corrected in both the PDF and HTML versions of the Article.
RESUMEN
The adsorption energy of carbon monoxide on Ni ad-islands and ultra-thin films grown on the Cu(110) surface can be finely tuned via a complex interplay among diffusion, site change mechanisms, and coverage effects. The observed features of CO desorption can be explained in terms of migration of CO molecules from Cu to Ni islands, competition between bridge and on-top adsorption sites, and repulsive lateral adsorbate-adsorbate interactions. While the CO adsorption energy on clean Cu(110) is of the order of 0.5 eV, Ni-alloying allows for its controlled, continuous tunability in the 0.98-1.15 eV range with Ni coverage. Since CO is a fundamental reactant and intermediate in many heterogeneous catalytic (electro)-conversion reactions, insight into these aspects with atomic level detail provides useful information to potentially drive applicative developments. The tunability range of the CO adsorption energy that we measure is compatible with the already observed tuning of conversion rates by Ni doping of Cu single crystal catalysts for methanol synthesis from a CO2, CO, and H2 stream under ambient pressure conditions.
RESUMEN
The bottom-up assembly of chiral structures usually relies on a cascade of molecular recognition interactions. A thorough description of these complex stereochemical mechanisms requires the capability of imaging multilevel coordination in real-time. Here we report the first direct observation of hierarchical expression of supramolecular chirality at work, for 10,10'-dibromo-9,9'-bianthryl (DBBA) on Cu(111). Molecular recognition first steers the growth of chiral organometallic chains and then leads to the formation of enantiopure islands. The structure of the networks was determined by noncontact atomic force microscopy (nc-AFM), while high-speed scanning tunnelling microscopy (STM) revealed details of the assembly mechanisms at the ms time-scale. The direct observation of the chirality transfer pathways allowed us to evaluate the enantioselectivity of the interchain coupling.
RESUMEN
The molecule-substrate interaction plays a key role in charge injection organic-based devices. Charge transfer at molecule-metal interfaces strongly affects the overall physical and magnetic properties of the system, and ultimately the device performance. Here, we report theoretical and experimental evidence of a pronounced charge transfer involving nickel tetraphenyl porphyrin molecules adsorbed on Cu(100). The exceptional charge transfer leads to filling of the higher unoccupied orbitals up to LUMO+3. As a consequence of this strong interaction with the substrate, the porphyrin's macrocycle sits very close to the surface, forcing the phenyl ligands to bend upwards. Due to this adsorption configuration, scanning tunneling microscopy cannot reliably probe the states related to the macrocycle. We demonstrate that photoemission tomography can instead access the Ni-TPP macrocycle electronic states and determine the reordering and filling of the LUMOs upon adsorption, thereby confirming the remarkable charge transfer predicted by density functional theory calculations.Charge transfer at molecule-metal interfaces affects the overall physical and magnetic properties of organic-based devices, and ultimately their performance. Here, the authors report evidence of a pronounced charge transfer involving nickel tetraphenyl porphyrin molecules adsorbed on copper.
RESUMEN
We performed a combined experimental and theoretical study of the assembly of phenylboronic acid on the Au(111) surface, which is found to lead to the formation of triphenylboroxines by spontaneous condensation of trimers of molecules. The interface between the boroxine group and the gold surface has been characterized in terms of its electronic properties, revealing the existence of an ultra-fast charge delocalization channel in the proximity of the oxygen atoms of the heterocyclic group. More specifically, the DFT calculations show the presence of an unoccupied electronic state localized on both the oxygen atoms of the adsorbed triphenylboroxine and the gold atoms of the topmost layer. By means of resonant Auger electron spectroscopy, we demonstrate that this interface state represents an ultra-fast charge delocalization channel. Boroxine groups are among the most widely adopted building blocks in the synthesis of covalent organic frameworks on surfaces. Our findings indicate that such systems, typically employed as templates for the growth of organic films, can also act as active interlayers that provide an efficient electronic transport channel bridging the inorganic substrate and organic overlayer.
RESUMEN
The adsorption of CO on Pt nanoclusters grown in a regular array on a template provided by the graphene/Ir(111) Moiré was investigated by means of infrared-visible sum frequency generation vibronic spectroscopy, scanning tunneling microscopy, X-ray photoelectron spectroscopy from ultrahigh vacuum to near-ambient pressure, and ab initio simulations. Both terminally and bridge bonded CO species populate nonequivalent sites of the clusters, spanning from first to second-layer terraces to borders and edges, depending on the particle size and morphology and on the adsorption conditions. By combining experimental information and the results of the simulations, we observe a significant restructuring of the clusters. Additionally, above room temperature and at 0.1 mbar, Pt clusters catalyze the spillover of CO to the underlying graphene/Ir(111) interface.
RESUMEN
The interaction of CO, CO2, CO + H2, CO2 + H2, and CO + CO2 + H2 with the nickel (110) single crystal termination has been investigated at 10(-1) mbar in situ as a function of the surface temperature in the 300-525 K range by means of infrared-visible sum frequency generation (IR-vis SFG) vibrational spectroscopy and by near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS). Several stable surface species have been observed and identified. Besides atomic carbon and precursors for graphenic C phases, five nonequivalent CO species have been distinguished, evidencing the role of coadsorption effects with H and C atoms, of H-induced activation of CO, and of surface reconstruction. At low temperature, carbonate species produced by the interaction of CO2 with atomic oxygen, which stems from the dissociation of CO2 into CO + O, are found on the surface. A metastable activated CO2(-) species is also detected, being at the same time a precursor state toward dissociation into CO and O in the reverse water-gas shift mechanism and a reactive species that undergoes direct conversion in the Sabatier methanation process. Finally, the stability of ethylidyne is deduced on the basis of our spectroscopic observations.
RESUMEN
Stable hydrocarbon surface species in the carbon dioxide hydrogenation reaction on Ir(111) were identified by means of infrared-visible sum-frequency generation vibrational spectroscopy and X-ray photoelectron spectroscopy under near-ambient pressure conditions (0.1 mbar). By introducing gas phase binary and ternary mixtures of CO2, CO, and H2 into the reaction chamber, stable ethylidyne and ethynyl species were found at the metal surface above 425 K, in remarkable analogy with that observed during the ethylene decomposition process yielding graphene. In addition, upon increasing temperature (up to 600 K depending on the reaction conditions), vibrational and electronic spectroscopic fingerprints appeared that could be attributed to the nucleation of aromatic hydrocarbons at the edge of metastable graphenic clusters interacting with the metal surface.
RESUMEN
We report the formation of dimethyl sulfoxide (DMSO) molecular complexes on Au(111) enabled by native gold adatoms unusually linking the molecules via a bonding of ionic nature, yielding a mutual stabilization between molecules and adatom(s). DMSO is a widely used polar, aprotic solvent whose interaction with metal surfaces is not fully understood. By combining X-ray photoelectron spectroscopy, low temperature scanning tunneling microscopy, and density functional theory (DFT) calculations, we show that DMSO molecules form complexes made by up to four molecules arranged with adjacent oxygen terminations. DFT calculations reveal that most of the observed structures are accurately reproduced if, and only if, the negatively charged oxygen terminations are linked by one or two positively charged Au adatoms. A similar behavior was previously observed only in nonstoichiometric organic salt layers, fabricated using linkage alkali atoms and strongly electronegative molecules. These findings suggest a motif for anchoring organic adlayers of polar molecules on metal substrates and also provide nanoscale insight into the interaction of DMSO with gold.
RESUMEN
An amino-carboxylic motif is identified as a novel synthon in the formation of 2D hetero-organic architectures at surfaces. The well-defined interacting scheme we describe herein represents an ideal prototypical system for further investigation of the interaction at surfaces of the two functional groups.
RESUMEN
Atomic-scale description of the structure of graphene edges on Ni(111), both during and post growth, is obtained by scanning tunneling microscopy (STM) in combination with density functional theory (DFT). During growth, at 470 °C, fast STM images (250 ms/image) evidence graphene flakes anchored to the substrate, with the edges exhibiting zigzag or Klein structure depending on the orientation. If growth is frozen, the flake edges hydrogenate and detach from the substrate, with hydrogen reconstructing the Klein edges.
RESUMEN
The catalytic conversion of carbon dioxide to synthetic fuels and other valuable chemicals is an issue of global environmental and economic impact. In this report we show by means of X-ray photoelectron spectroscopy in the millibar range that, on a Ni surface, the reduction of carbon dioxide is indirectly governed by the CO chemistry. While the growth of graphene and the carbide-graphene conversion can be controlled by selecting the reaction temperature, oxygen is mainly removed by CO, since oxygen reduction by hydrogen is a slow process on Ni. Even though there is still a consistent pressure gap with respect to industrial reaction conditions, the observed phenomena provide a plausible interpretation of the behavior of Ni/Cu based catalysts for CO2 conversion and account for a possible role of CO in the methanol synthesis process.
RESUMEN
Achieving control of the nanoscale structure of binary alloys is of paramount importance for the design of novel materials with specific properties, leading to, for example, improved reaction rates and selectivity in catalysis, tailored magnetic behavior in electronics, and controlled growth of nanostructured materials such as graphene. By means of a combined experimental and theoretical approach, we show that the complex self-diffusion mechanisms determining these key properties can be mostly defined by kinetic rather than energetic effects. We explain how in the Ni-Cu system nanoscale control of self-diffusion and segregation processes close to the surface can be achieved by finely tuning the relative concentration of the alloy constituents. This allows tailoring the material functionality and provides a clear explanation of previously observed effects involved, for example, in the growth of graphene films and in the catalytic reduction of carbon dioxide.