Stabilizing Monoatomic Two-Coordinate Bismuth(I) and Bismuth(II) Using a Redox Noninnocent Bis(germylene) Ligand.

The formation of isolable monatomic BiI complexes and BiII radical species is challenging due to the pronounced reducing nature of metallic bismuth. Here, we report a convenient strategy to tame BiI and BiII atoms by taking advantage of the redox noninnocent character of a new chelating bis(germylene) ligand. The remarkably stable novel BiI cation complex 4, supported by the new bis(iminophosphonamido-germylene)xanthene ligand [(P)GeII(Xant)GeII(P)] 1, [(P)GeII(Xant)GeII(P) = Ph2P(NtBu)2GeII(Xant)GeII(NtBu)2PPh2, Xant = 9,9-dimethyl-xanthene-4,5-diyl], was synthesized by a two-electron reduction of the cationic BiIIII2 precursor complex 3 with cobaltocene (Cp2Co) in a molar ratio of 1:2. Notably, owing to the redox noninnocent character of the germylene moieties, the positive charge of BiI cation 4 migrates to one of the Ge atoms in the bis(germylene) ligand, giving rise to a germylium(germylene) BiI complex as suggested by DFT calculations and X-ray photoelectron spectroscopy (XPS). Likewise, migration of the positive charge of the BiIIII2 cation of 3 results in a bis(germylium)BiIIII2 complex. The delocalization of the positive charge in the ligand engenders a much higher stability of the BiI cation 4 in comparison to an isoelectronic two-coordinate Pb0 analogue (plumbylone; decomposition below -30 °C). Interestingly, 4[BArF] undergoes a reversible single-electron transfer (SET) reaction (oxidation) to afford the isolable BiII radical complex 5 in 5[BArF]2. According to electron paramagnetic resonance (EPR) spectroscopy, the unpaired electron predominantly resides at the BiII atom. Extending the redox reactivity of 4[OTf] employing AgOTf and MeOTf affords BiIII(OTf)2 complex 7 and BiIIIMe complex 8, respectively, demonstrating the high nucleophilic character of BiI cation 4.

Intermetallic Cobalt Indium Nanoparticles as Oxygen Evolution Reaction Precatalyst: A Non-Leaching p-Block Element.

Merely all transition-metal-based materials reconstruct into similar oxyhydroxides during the electrocatalytic oxygen evolution reaction (OER), severely limiting the options for a tailored OER catalyst design. In such reconstructions, initial constituent p-block elements take a sacrificial role and leach into the electrolyte as oxyanions, thereby losing the ability to tune the catalyst's properties systematically. From a thermodynamic point of view, indium is expected to behave differently and should remain in the solid phase under alkaline OER conditions. However, the structural behavior of transition metal indium phases during the OER remains unexplored. Herein, are synthesized intermetallic cobalt indium (CoIn3 ) nanoparticles and revealed by in situ X-ray absorption spectroscopy and scanning transmission microscopy that they undergo phase segregation to cobalt oxyhydroxide and indium hydroxide. The obtained cobalt oxyhydroxide outperforms a metallic-cobalt-derived one due to more accessible active sites. The observed phase segregation shows that indium behaves distinctively differently from most p-block elements and remains at the electrode surface, where it can form lasting interfaces with the active metal oxo phases.

In-Liquid Plasma-Mediated Manganese Oxide Electrocatalysts for Quasi-Industrial Water Oxidation and Selective Dehydrogenation.

The production of renewable feedstocks through the coupled oxygen evolution reaction (OER) with selective organic oxidation requires a perfect balance in the choice of a catalyst and its synthesis access, morphology, and catalytic activity. Herein we report a rapid in-liquid plasma approach to produce a hierarchical amorphous birnessite-type manganese oxide layer on 3D nickel foam. The as-prepared anode exhibits an OER activity with overpotentials of 220, 250, and 270 mV for 100, 500, and 1000 mA·cm-2, respectively, and can spontaneously be paired with chemoselective dehydrogenation of benzylamine under both ambient and industrial (6 M KOH, 65 °C) alkaline conditions. The in-depth ex-situ and in-situ characterization unequivocally demonstrate the intercalation of potassium in the birnessite-type phase with prevalent MnIII states as an active structure, which displays a trade-off between porous morphology and bulk volume catalytic activity. Further, a structure-activity relationship is realized based on the cation size and structurally similar manganese oxide polymorphs. The presented method is a substantial step forward in developing a robust MnOx catalyst for combining effective industrial OER and value-added organic oxidation.

Degradation of Phenol via an Advanced Oxidation Process (AOP) with Immobilized Commercial Titanium Dioxide (TiO2) Photocatalysts.

Four commercial titanium dioxide (TiO2) photocatalysts, namely P25, P90, PC105, and PC500, were immobilized onto steel plates using a sol-gel binder and investigated for phenol degradation under 365 nm UV-LED irradiation. High-performance liquid chromatography (HPLC) and total organic carbon (TOC) analyses were performed to study the impact of three types of oxygen sources (air, dispersed synthetic air, and hydrogen peroxide) on the photocatalytic performance. The photocatalyst films were stable and there were significant differences in their performance. The best result was obtained with the P90/UV/H2O2 system with 100% degradation and about 70% mineralization within 3 h of irradiation. The operating conditions varied, showing that water quality is crucial for the performance. A wastewater treatment plant was developed based on the lab-scale results and water treatment costs were estimated for two cases of irradiation: UV-LED (about 600 EUR/m3) and sunlight (about 60 EUR/m3). The data show the high potential of immobilized photocatalysts for pollutant degradation under advanced oxidation process (AOP) conditions, but there is still a need for optimization to further reduce treatment costs.

A Facile Molecular Approach to Amorphous Nickel Pnictides and Their Reconstruction to Crystalline Potassium-Intercalated γ-NiOOHx Enabling High-Performance Electrocatalytic Water Oxidation and Selective Oxidation of 5-Hydroxymethylfurfural.

The low-temperature molecular precursor approach can be beneficial to conventional solid-state methods, which require high temperatures and lead to relatively large crystalline particles. Herein, a novel, single-step, room-temperature preparation of amorphous nickel pnictide (NiE; EP, As) nanomaterials is reported, starting from NaOCE(dioxane)n and NiBr2 (thf)1.5 . During application for the oxygen evolution reaction (OER), the pnictide anions leach, and both materials fully reconstruct into nickel(III/IV) oxide phases (similar to γ-NiOOH) comprising edge-sharing (NiO6 ) layers with intercalated potassium ions and a d-spacing of 7.27 Å. Remarkably, the intercalated γ-NiOOHx phases are nanocrystalline, unlike the amorphous nickel pnictide precatalysts. This unconventional reconstruction is fast and complete, which is ascribed to the amorphous nature of the nanostructured NiE precatalysts. The obtained γ-NiOOHx can effectively catalyse the OER for 100 h at a high current density (400 mA cm-2 ) and achieves outstandingly high current densities (>600 mA cm-2 ) for the selective, value-added oxidation of 5-hydroxymethylfurfural (HMF). The NiP-derived γ-NiOOHx shows a higher activity for both processes due to more available active sites. It is anticipated that the herein developed, effective, room-temperature molecular synthesis of amorphous nickel pnictide nanomaterials can be applied to other functional transition-metal pnictides.

Robert C. West (1928-2022): A Giant in Organosilicon Chemistry, Cosmopolitan, Mountain Climber and Pilot.

Robert (Bob) Culbertson West passed away on October 12, 2022. Along with his pioneering contributions in the field of organosilicon chemistry, he will be remembered as an outstanding researcher who brought together many extraordinary talents and interests in addition to science.

Synthesis and Reactivity of an Anti-van't Hoff/Le Bel Compound with a Planar Tetracoordinate Silicon(II) Atom.

For a long time, planar tetracoordinate carbon (ptC) represented an exotic coordination mode in organic and organometallic chemistry, but it is now a useful synthetic building block. In contrast, realization of planar tetracoordinate silicon (ptSi), a heavier analogue of ptC, is still challenging. Herein we report the successful synthesis and unusual reactivity of the first ptSi species of divalent silicon present in 3, supported by the chelating bis(N-heterocyclic silylene)bipyridine ligand, 2,2'-{[(4-tBuPh)C(NtBu)]2SiNMe}2(C5N)2, 1]. The compound resulted from direct reaction of 1 with Idipp-SiI2 [Idipp = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene]. Alternatively, it can also be synthesized by a two-electron reduction of the corresponding Si(IV) precursor 2 with 2 molar equiv of KC10H8. Density functional theory calculations show that the lone pair at the ptSi(II) resides almost completely in its 3pz orbital, very different from known four-coordinate silylenes. Oxidative addition of MeI to the ptSi(II) atom affords the corresponding pentacoordinate Si(IV) compound 4, with the methyl group located in an apical position. Remarkably, the reaction of 2 with [CuOtBu] leads to the regeneration of the bis(silylene) arms via Si-Si bond scission and induces the Si(II) → Si(IV) oxidation of the central Si(II) atom and concomitant two-electron reduction of the bipyridine moiety to form the neutral bis(silylene)silyl Cu(I) complex 5.

Chelating Bis-silylenes As Powerful Ligands To Enable Unusual Low-Valent Main-Group Element Functions.

ConspectusSilylenes are divalent silicon species with an unoccupied 3p orbital and one lone pair of electrons at the SiII center. Owing to the excellent σ-donating ability of amidinato-based silylenes, which stems from the intramolecular imino-N donor interaction with the vacant 3p orbital of the silicon atom, N-heterocyclic amidinato bis(silylenes) [bis(NHSi)s] can serve as versatile strong donating ligands for cooperative stabilization of central atoms in unusually low oxidation states. Herein, we present our recent achievement on the application of bis(NHSi) ligands with electronically and spatially different spacers to main-group chemistry, which has allowed the isolation of a variety of low-valent compounds consisting of monatomic zero-valent group 14 E0 complexes (named "metallylones", E = Si, Ge, Sn, Pb); monovalent group 15 EI complexes (E = N, P, isoelectronic with metallylones); and diatomic low-valent E2 complexes (E = Si, Ge, P) with intriguing electronic structures and chemical reactivities.The role of the SiII···SiII distance was revealed to be crucial in this chemistry. Utilizing the pyridine-based bis(NHSi) (Si···Si distance: 7.8 Å) ligand, germanium(0) complexes with additional Fe(CO)4 protection at the Ge0 site have been isolated. Featuring a shorter Si···Si distance of 4.3 Å, the xanthene-based bis(NHSi) has allowed the realization of the full series of heavy zero-valent group 14 element E0 complexes (E = Si, Ge, Sn, Pb), while the o-carborane-based bis(NHSi) (Si···Si distance: 3.3 Å) has enabled the isolation of Si0 and Ge0 complexes. Remarkably, reduction of the o-carborane-based bis(NHSi)-supported Si0 and Ge0 complexes induces the movement of two electrons into the o-carborane core and provides access to SiI-SiI and GeI-GeI species as oxidation products. Additionally, the o-carborane-based bis(NHSi) reacts with adamantyl azide, leading to a series of nitrogen(I) complexes as isoelectronic species of a carbone (C0 complex). Moreover, cooperative activation of white phosphorus gives bis(NHSi)-supported phosphorus complexes with varying and unexpected electronic structures when employing the xanthene-, o-carborane-, and aniline-based bis(NHSi)s. With the better kinetic protection provided by the xanthene-based bis(NHSi), small-molecule activation and functionalization of the bis(NHSi)-supported central E or E2 atoms (E = Si, Ge, P) are possible and furnish several novel functionalized silicon, germanium, and phosphorus compounds.With knowledge of the ability of chelating bis(NHSi)s in coordinating and functionalizing low-valent group 14 and 15 elements, the application of these ligand systems to other main-group elements such as group 2 and 13 is quite promising. To fully understand the role of the NHSi in a bis(NHSi) ligand, introducing a mixed ligand, i.e., the combination of an NHSi with other functional groups, such as Lewis acidic borane or Lewis basic borylene, in one chelating ligand could lead to new types of low-valent main-group species. Furthermore, the development of a genuine acyclic silylene, without an imino-N interaction with the vacant 3p orbital at the silicon(II) atom, as part of a chelating bis(acyclic silylene) has the potential to form very electronically different main-group element complexes that could achieve even more challenging bond activations such as N2 or unactivated C-H bonds.

Evolution of Carbonate-Intercalated γ-NiOOH from a Molecularly Derived Nickel Sulfide (Pre)Catalyst for Efficient Water and Selective Organic Oxidation.

The development of a competent (pre)catalyst for the oxygen evolution reaction (OER) to produce green hydrogen is critical for a carbon-neutral economy. In this aspect, the low-temperature, single-source precursor (SSP) method allows the formation of highly efficient OER electrocatalysts, with better control over their structural and electronic properties. Herein, a transition metal (TM) based chalcogenide material, nickel sulfide (NiS), is prepared from a novel molecular complex [NiII (PyHS)4 ][OTf]2 (1) and utilized as a (pre)catalyst for OER. The NiS (pre)catalyst requires an overpotential of only 255 mV to reach the benchmark current density of 10 mA cm-2 and shows 63 h of chronopotentiometry (CP) stability along with over 95% Faradaic efficiency in 1 m KOH. Several ex situ measurements and quasi in situ Raman spectroscopy uncover that NiS irreversibly transformed to a carbonate-intercalated γ-NiOOH phase under the alkaline OER conditions, which serves as the actual active structure for the OER. Additionally, this in situ formed active phase successfully catalyzes the selective oxidation of alcohol, aldehyde, and amine-based organic substrates to value-added chemicals, with high efficiencies.

Reviving Oxygen Evolution Electrocatalysis of Bulk La-Ni Intermetallics via Gaseous Hydrogen Engineering.

A hydrogen processing strategy is developed to enable bulk LaNi5 to attain high activity and long-term stability toward the electrocatalytic oxygen evolution reaction (OER). By a combination of in situ Raman and quasi in situ X-ray absorption (XAS) spectra, secondary-electron-excited scanning transmission electron microscopy (STEM) patterns as well as the Rietveld method and density functional theory (DFT) calculations, it is discovered that hydrogen-induced lattice distortion, grain refinement, and particle cracks dictate the effective reconstruction of the LaNi5 surface into a porous hetero-nanoarchitecture composed of uniformly confined active γ-NiOOH nanocrystals by La(OH)3 layer in the alkaline OER process. This significantly optimizes the charge transfer, structural integrity, active-site exposure, and adsorption energy toward the reaction intermediates. Benefiting from these merits, the overpotential (322 mV) at 100 mA cm-2 for the hydrogen-processed OER catalyst deposited on nickel foam is reduced by 104 mV as compared to the original phase. Notably, it exhibits remarkable stability for 10 days at an industrial-grade current density of more than 560 mA cm-2 in alkaline media.

Spectroscopic Properties of a Biologically Relevant [Fe2 (µ-O)2 ] Diamond Core Motif with a Short Iron-Iron Distance.

Diiron cofactors in enzymes perform diverse challenging transformations. The structures of high valent intermediates (Q in methane monooxygenase and X in ribonucleotide reductase) are debated since Fe-Fe distances of 2.5-3.4 Šwere attributed to "open" or "closed" cores with bridging or terminal oxido groups. We report the crystallographic and spectroscopic characterization of a FeIII 2 (µ-O)2 complex (2) with tetrahedral (4C) centres and short Fe-Fe distance (2.52 Å), persisting in organic solutions. 2 shows a large Fe K-pre-edge intensity, which is caused by the pronounced asymmetry at the TD FeIII centres due to the short Fe-µ-O bonds. A ≈2.5 ŠFe-Fe distance is unlikely for six-coordinate sites in Q or X, but for a Fe2 (µ-O)2 core containing four-coordinate (or by possible extension five-coordinate) iron centres there may be enough flexibility to accommodate a particularly short Fe-Fe separation with intense pre-edge transition. This finding may broaden the scope of models considered for the structure of high-valent diiron intermediates formed upon O2 activation in biology.

Oxygen Evolution Activity of Amorphous Cobalt Oxyhydroxides: Interconnecting Precatalyst Reconstruction, Long-Range Order, Buffer-Binding, Morphology, Mass Transport, and Operation Temperature.

Nanocrystalline or amorphous cobalt oxyhydroxides (CoCat) are promising electrocatalysts for the oxygen evolution reaction (OER). While having the same short-range order, CoCat phases possess different electrocatalytic properties. This phenomenon is not conclusively understood, as multiple interdependent parameters affect the OER activity simultaneously. Herein, a layered cobalt borophosphate precatalyst, Co(H2 O)2 [B2 P2 O8 (OH)2 ]·H2 O, is fully reconstructed into two different CoCat phases. In contrast to previous reports, this reconstruction is not initiated at the surface but at the electrode substrate to catalyst interface. Ex situ and in situ investigations of the two borophosphate derived CoCats, as well as the prominent CoPi and CoBi identify differences in the Tafel slope/range, buffer binding and content, long-range order, number of accessible edge sites, redox activity, and morphology. Considering and interconnecting these aspects together with proton mass-transport limitations, a comprehensive picture is provided explaining the different OER activities. The most decisive factors are the buffers used for reconstruction, the number of edge sites that are not inhibited by irreversibly bonded buffers, and the morphology. With this acquired knowledge, an optimized OER system is realized operating in near-neutral potassium borate medium at 1.62 ± 0.03 VRHE yielding 250 mA cm-2 at 65 °C for 1 month without degrading performance.

A bis(silylene)pyridine pincer ligand can stabilize mononuclear manganese(0) complexes: facile access to isolable analogues of the elusive d7-Mn(CO)5 radical.

Using the potentially tridentate N,N'-bis(N-heterocyclic silylene)pyridine [SiNSi] pincer-type ligand, 2,6-N,N'-diethyl-bis[N,N'-di-tert-butyl(phenylamidinato)silylene] diaminopyridine, led to the first isolable bis(silylene)pyridine-stabilized manganese(0) complex, {κ3-[SiNSi]Mn(dmpe)} 4 (dmpe = (Me2P)2C2H4), which represents an isolobal 17 VE analogue of the elusive Mn(CO)5 radical. The compound is accessible through the reductive dehalogenation of the corresponding dihalido (SiNSi)Mn(ii) complexes 1 (Cl) and 2 (Br) with potassium graphite. Exposing 4 towards the stronger π-acceptor ligands CO and 2,6-dimethylphenyl isocyanide afforded the related Mn(0) complexes κ2-[SiNSi]Mn(CO)3 (5) and κ3-[SiNSi]Mn(CNXylyl)2(κ1-dmpe) (6), respectively. Remarkably, the stabilization of Mn(0) in the coordination sphere of the [SiNSi] ligand favors the d7 low-spin electronic configuration, as suggested by EPR spectroscopy, SQUID measurements and DFT calculations. The suitability of 4 acting as a superior pre-catalyst in regioselective hydroboration of quinolines has also been demonstrated.

The Heaviest Bottleable Metallylone: Synthesis of a Monatomic, Zero-Valent Lead Complex ("Plumbylone").

The elusive plumbylone {[SiII (Xant)SiII ]Pb0 } 3 stabilized by the bis(silylene)xanthene chelating ligand 1, [SiII (Xant)SiII =PhC(NtBu)2 Si(Xant)Si(NtBu)2 CPh], and its isolable carbonyl iron complex {[SiII (Xant)SiII ]Pb0 Fe(CO)4 } 4 are reported. The compounds 3 and 4 were obtained stepwise via reduction of the lead(II) dibromide complex {[SiII (Xant)SiII ]PbBr2 } 2, prepared from the bis(silylene)xanthene 1 and PbBr2 , employing potassium naphthalenide and K2 Fe(CO)4 , respectively. While the genuine plumbylone 3 is rather labile even at -60 °C, its Pb0 →Fe(CO)4 complex 4 turned out to be relatively stable and bottleable. However, solutions of 4 decompose readily to elemental Pb and {[SiII (Xant)SiII ]Fe(CO)3 } 5 at 80 °C. Reaction of 4 with [Rh(CO)2 Cl]2 leads to the formation of the unusual dimeric [(OC)2 RhPb(Cl)Fe(CO)4 ] complex 6 with trimetallic Rh-Pb-Fe bonds. The molecular and electronic structures of 3 and 4 were established by Density Functional Theory (DFT) calculations.

An Isolable 2,5-Disila-3,4-Diphosphapyrrole and a Conjugated Si=P-Si=P-Si=N Chain Through Degradation of White Phosphorus with a N,N-Bis(Silylenyl)Aniline.

White phosphorus (P4 ) undergoes degradation to P2 moieties if exposed to the new N,N-bis(silylenyl)aniline PhNSi2 1 (Si=Si[N(tBu)]2 CPh), furnishing the first isolable 2,5-disila-3,4-diphosphapyrrole 2 and the two novel functionalized Si=P doubly bonded compounds 3 and 4. The pathways for the transformation of the non-aromatic 2,5-disila-3,4-diphosphapyrrole PhNSi2 P2 2 into 3 and 4 could be uncovered. It became evident that 2 reacts readily with both reactants P4 and 1 to afford either the polycyclic Si=P-containing product [PhNSi2 P2 ]2 P2 3 or the unprecedented conjugated Si=P-Si=P-Si=NPh chain-containing compound 4, depending on the employed molar ratio of 1 and P4 as well as the reaction conditions. Compounds 3 and 4 can be converted into each other by reactions with 1 and P4 , respectively. All new compounds 1-4 were unequivocally characterized including by single-crystal X-ray diffraction analysis. In addition, the electronic structures of 2-4 were established by Density Functional Theory (DFT) calculations.

Synthesis of High Surface Area-Group 13-Metal Oxides via Atomic Layer Deposition on Mesoporous Silica.

The atomic layer deposition of gallium and indium oxide was investigated on mesoporous silica powder and compared to the related aluminum oxide process. The respective oxide (GaOx, InOx) was deposited using sequential dosing of trimethylgallium or trimethylindium and water at 150 °C. In-situ thermogravimetry provided direct insight into the growth rates and deposition behavior. The highly amorphous and well-dispersed nature of the oxides was shown by XRD and STEM EDX-mappings. N2 sorption analysis revealed that both ALD processes resulted in high specific surface areas while maintaining the pore structure. The stoichiometry of GaOx and InOx was suggested by thermogravimetry and confirmed by XPS. FTIR and solid-state NMR were conducted to investigate the ligand deposition behavior and thermogravimetric data helped estimate the layer thicknesses. Finally, this study provides a deeper understanding of ALD on powder substrates and enables the precise synthesis of high surface area metal oxides for catalytic applications.

Unexpected White Phosphorus (P4 ) Activation Modes with Silylene-Substituted o-Carboranes and Access to an Isolable 1,3-Diphospha-2,4-disilabutadiene.

New types of metal-free white phosphorus (P4 ) activation are reported. While the phosphine-silylene-substituted dicarborane 1, CB-SiP (CB=ortho-C,C'-C2 B10 H10 , Si=PhC(tBuN)2 Si, P=P[N(tBu)CH2 ]2 ), activates white phosphorus in a 2 : 1 molar ratio to yield the P5 -chain containing species 2, the analogous bis(silylene)-substituted compound 3, CB-Si2 , reacts with P4 in the molar ratio of 2 : 1 to furnish the first isolable 1,3-diphospha-2,4-disilabutadiene (Si=P-Si=P-containing) compound 4. For the latter reaction, two intermediates having a CB-Si2 P4 and CB-Si2 P2 core could be observed by multinuclear NMR spectroscopy. The compounds 2 and 4 were characterized including single-crystal X-ray diffraction analyses. Their electronic structures and mechanisms were investigated by density functional theory calculations.

The Pivotal Role of s-, p-, and f-Block Metals in Water Electrolysis: Status Quo and Perspectives.

Transition metals, in particular noble metals, are the most common species in metal-mediated water electrolysis because they serve as highly active catalytic sites. In many cases, the presence of nontransition metals, that is, s-, p-, and f-block metals with high natural abundance in the earth-crust in the catalytic material is indispensable to boost efficiency and durability in water electrolysis. This is why alkali metals, alkaline-earth metals, rare-earth metals, lean metals, and metalloids receive growing interest in this research area. In spite of the pivotal role of these nontransition metals in tuning efficiency of water electrolysis, there is far more room for developments toward a knowledge-based catalyst design. In this review, five classes of nontransition metals species which are successfully utilized in water electrolysis, with special emphasis on electronic structure-catalytic activity relationships and phase stability, are discussed. Moreover, specific fundamental aspects on electrocatalysts for water electrolysis as well as a perspective on this research field are also addressed in this account. It is anticipated that this review can trigger a broader interest in using s-, p-, and f-block metals species toward the discovery of advanced polymetal-containing electrocatalysts for practical water splitting.

A Striking Mode of Activation of Carbon Disulfide with a Cooperative Bis(silylene).

The reactivity of the 1,4-substituted bis(silylenyl)terphenylene 1, 1,4-[ortho-(LSi)C6 H4 ]2 C6 H4 , (L=RC(NtBu)2 , R=Ph, Mes) towards CS2 is reported. It results in a dearomatization of the phenylene ring, affording the 1,3-substituted cyclohexadiene derivative 2. According to DFT calculations, a transient silene containing a Si=C bond capable of π(C=C) addition at the aromatic phenylene ring is a key intermediate. In contrast, addition of CS2 to the biphenyl-substituted mono-silylene ortho-(LSi)C6 H4 -C6 H5 3 leaves the aromatic π-system intact and forms, in a [1+2] cycloaddition reaction, the corresponding thiasilirane 4 with a three-membered SiSC ring. Further experimental studies led to the isolation of the novel mesoionic five-membered Si2 S2 C heterocycle 6, which reacts with CS2 under C-C bond formation. All isolated new compounds were fully characterized and their molecular structures determined by single-crystal X-ray diffraction analyses.

Deoxygenation of Nitrous Oxide and Nitro Compounds Using Bis(N-Heterocyclic Silylene)Amido Iron Complexes as Catalysts.

Herein, we report the efficient degradation of N2 O with a well-defined bis(silylene)amido iron complex as catalyst. The deoxygenation of N2 O using the iron silanone complex 4 as a catalyst and pinacolborane (HBpin) as a sacrificial reagent proceeds smoothly at 50 °C to form N2 , H2 , and (pinB)2 O. Mechanistic studies suggest that the iron-silicon cooperativity is the key to this catalytic transformation, which involves N2 O activation, H atom transfer, H2 release and oxygenation of the boron sites. This approach has been further developed to enable catalytic reductions of nitro compounds, producing amino-boranes with good functional-group tolerance and excellent chemoselectivity.