Orientation and morphology control in acid-catalyzed covalent organic framework thin films.

As thin films of semiconducting covalent organic frameworks (COFs) are demonstrating utility for ambipolar electronics, channel materials in organic electrochemical transistors (OECTs), and broadband photodetectors, control and modulation of their thin film properties is paramount. In this work, an interfacial growth technique is utilized to synthesize imine TAPB-PDA COF films at both the liquid-liquid interface as well as at the liquid-solid interface on a Si/SiO2 substrate. The concentration of acetic acid catalyst in the aqueous phase is shown to significantly influence the thin film morphology of the liquid-solid growth, with concentrations below 1 M resulting in no film nucleation, concentrations of 1-4 M enabling smooth film formation, and concentrations greater than 4 M resulting in films with a higher density of particulates on the surface. Importantly, while the films grown at the liquid-liquid interface are mixed-orientation, those grown directly at the liquid-solid interface on the Si/SiO2 surface have highly oriented COF layers aligned parallel to the substrate surface. Moreover, this liquid-solid growth process affords TAPB-PDA COF thin films with p-type charge transport having a transconductance of 10 µS at a gate voltage of -0.9 V in an OECT device structure.

Military Medicine and Medical Research as a Source of Inspiration and Innovation to Solve National Security and Health Challenges in the 21st Century.

The history of military medicine and research is rife with examples of novel treatments and new approaches to heal and cure soldiers and others impacted by war's devastation. In the 21st century, new threats, like climate change, are combined with traditional threats, like geopolitical conflict, to create novel challenges for our strategic interests. Extreme and inaccessible environments provide heightened risks for warfighter exposure to dangerous bacteria, viruses, and fungi, as well as exposure to toxic substances and extremes of temperature, pressure, or both providing threats to performance and eroding resilience. Back home, caring for our veterans is also a health-care priority, and the diseases of veterans increasingly overlap with the health needs of an aging society. These trends of climate change, politics, and demographics suggest performance evaluation and resilience planning and response are critical to assuring both warfighter performance and societal health. The Cleveland ecosystem, comprising several hospitals, a leading University, and one of the nation's larger Veteran's Health Administration systems, is ideal for incubating and understanding the response to these challenges. In this review, we explore the interconnections of collaborations between Defense agencies, particularly Air Force and Army and academic medical center-based investigators to drive responses to the national health security challenges facing the United States and the world.

Label-Free Neuropeptide Detection beyond the Debye Length Limit.

Biosensors with high selectivity, high sensitivity, and real-time detection capabilities are of significant interest for diagnostic applications as well as human health and performance monitoring. Graphene field-effect transistor (GFET) based biosensors are suitable for integration into wearable sensor technology and can potentially demonstrate the sensitivity and selectivity necessary for real-time detection and monitoring of biomarkers. Previously reported DC-mode GFET biosensors showed a high sensitivity for sensing biomarkers in solutions with a low salt concentration. However, due to Debye length screening, the sensitivity of the DC-mode GFET biosensors decreases significantly during operation in a physiological fluid such as sweat or interstitial fluid. To overcome the Debye screening length limitation, we report here alternating current (AC) mode heterodyne-based GFET biosensors for sensing neuropeptide-Y (NPY), a key stress biomarker, in artificial sweat at physiologically relevant ionic concentrations. Our AC-mode GFET biosensors show a record ultralow detection limit of 2 × 10-18 M with an extensive dynamic range of 10 orders of magnitude in sensor response to target NPY concentration. The sensors were characterized for various carrier frequencies (ranging from 30 kHz to 2 MHz) of the applied AC voltages and various salt concentrations (10, 50, and 100 mM). Contrary to DC-mode sensing, the AC-mode sensor response increases with an increase in salt concentration in the electrolyte. The sensor response can be further enhanced by tuning the carrier frequency of the applied AC voltage. The optimum response frequency of our sensor is approximately 400-600 kHz for salt concentrations of 50 and 100 mM, respectively. The salt-concentration- and frequency-dependent sensor response can be explained by an electrolyte-gated capacitance model.

Self-Assembly of Uniaxial Fullerene Supramolecules Aligned within Carbon Nanotube Fibers.

The conductivity and strength of carbon nanotube (CNT) wires currently rival those of existing engineering materials; fullerene-based materials have not progressed similarly, despite their exciting transport properties such as superconductivity. This communication reveals a new mechanically robust wire of mutually aligned fullerene supramolecules self-assembled between CNT bundles, where the fullerene supramolecular internal crystal structure and outer surface are aligned and dispersed with the CNT bundles. The crystallinity, crystal dimensions, and other structural features of the fullerene supramolecular network are impacted by a number of important production processes such as fullerene concentration and postprocess annealing. The crystal spacing of the CNTs and fullerenes is not altered, suggesting that they are not exerting significant internal pressure on each other. In low concentrations, the addition of networked fullerenes makes the CNT wire mechanically stronger. More importantly, novel mutually aligned and networked fullerene supramolecules are now in a bulk self-supporting architecture.

A bacterial membrane sculpting protein with BAR domain-like activity.

Bin/Amphiphysin/RVS (BAR) domain proteins belong to a superfamily of coiled-coil proteins influencing membrane curvature in eukaryotes and are associated with vesicle biogenesis, vesicle-mediated protein trafficking, and intracellular signaling. Here, we report a bacterial protein with BAR domain-like activity, BdpA, from Shewanella oneidensis MR-1, known to produce redox-active membrane vesicles and micrometer-scale outer membrane extensions (OMEs). BdpA is required for uniform size distribution of membrane vesicles and influences scaffolding of OMEs into a consistent diameter and curvature. Cryo-TEM reveals that a strain lacking BdpA produces lobed, disordered OMEs rather than membrane tubules or narrow chains produced by the wild-type strain. Overexpression of BdpA promotes OME formation during planktonic growth of S. oneidensis where they are not typically observed. Heterologous expression results in OME production in Marinobacter atlanticus and Escherichia coli. Based on the ability of BdpA to alter membrane architecture in vivo, we propose that BdpA and its homologs comprise a newly identified class of bacterial BAR domain-like proteins.

Projectile Impact Shock-Induced Deformation of One-Component Polymer Nanocomposite Thin Films.

Matrix-free assemblies of polymer-grafted nanoparticles (PGNs) enable mechanically robust materials for a variety of structural, electronic, and optical applications. Recent quasi-static mechanical studies have identified the key parameters that enhance canopy entanglement and promote plasticity of the PGNs below Tg. Here we experimentally explore the high-strain-rate shock impact behavior of polystyrene grafted NPs and compare their energy absorption capabilities to that of homopolystyrene for film thicknesses ranging from 75 to 550 nm and for impact velocities from 350 to 800 m/s. Modeling reveals that the initial shock compression results in a rapid temperature increase at the impact site. The uniformity of this heating is consistent with observations of greater kinetic energy absorption per mass (Ep*) of thinner films due to extensive visco-plastic deformation of molten film around the penetration site. Adiabatic heating is insufficient to raise the temperature at the exit surface of the thickest films resulting in increased strain localization at the impact periphery with less melt elongation. The extent and distribution of entanglements also influence Ep*. Structurally, each NP acts as a giant cross-link node, coupling surrounding nodes via the number of canopy chains per NP and the nature and number of entanglements between canopies anchored to different NPs. Load sharing via this dual network, along with geometrical factors such as film thickness, lead to extreme Ep* arising from the sequence of instantaneous adiabatic shock heating followed by visco-plastic drawing of the film by the projectile. These observations elucidate the critical factors necessary to create robust polymer-nanocomposite multifunctional films.

Uniaxial Deformation and Crazing in Glassy Polymer-Grafted Nanoparticle Ultrathin Films.

The deformation behavior of neat, glassy polymer-grafted nanoparticle (PGN) monolayer films is studied using coarse-grained molecular dynamics simulations and experiments on polystyrene-grafted silica. In both the simulations and experiments, apparent crazing behavior is observed during deformation. The PGN systems show a relatively more uniform, perforated sheet craze structure and significantly higher strain at break than reference homopolymers of the same length. Short chain, unentangled PGN monolayers are also simulated for comparison; these are brittle and break apart without crazing. The entangled PGN simulations are analyzed in detail for systems at both high and moderate graft density. Stress-strain curves show three distinct regions: yielding and strain localization, craze widening, and strain hardening preceding catastrophic failure. The PGN stress-strain behavior appears more similar to that of longer chain, highly entangled homopolymer films than to the reference homopolymer films of the same length as the graft chains, suggesting that the particles effectively add additional entanglement points. The moderate graft density particles have higher strain-to-failure and maximum stress than the high graft density particles. We suggest this increased robustness for lower graft density systems is due to their increased interpenetration of graft chains between neighboring particles, which leads to increased interparticle entanglements per chain.

In Operando Observation of Neuropeptide Capture and Release on Graphene Field-Effect Transistor Biosensors with Picomolar Sensitivity.

Transmission electron microscopy (TEM) is being pushed to new capabilities which enable studies on systems that were previously out of reach. Among recent innovations, TEM through liquid cells (LC-TEM) enables in operando observation of biological phenomena. This work applies LC-TEM to the study of biological components as they interact on an abiotic surface. Specifically, analytes or target molecules like neuropeptide Y (NPY) are observed in operando on functional graphene field-effect transistor (GFET) biosensors. Biological recognition elements (BREs) identified using biopanning with affinity to NPY are used to functionalize graphene to obtain selectivity. On working devices capable of achieving picomolar responsivity to neuropeptide Y, LC-TEM reveals translational motion, stochastic positional fluctuations due to constrained Brownian motion, and rotational dynamics of captured analyte. Coupling these observations with the electrical responses of the GFET biosensors in response to analyte capture and/or release will potentially enable new insights leading to more advanced and capable biosensor designs.

Disulfide Crosslinked Hydrogels Made From the Hydra Stinging Cell Protein, Minicollagen-1.

Minicollagens from cnidarian nematocysts are attractive potential building blocks for the creation of strong, lightweight and tough polymeric materials with the potential for dynamic and reconfigurable crosslinking to modulate functionality. In this study, the Hydra magnipapillata minicollagen-1 isoform was recombinantly expressed in bacteria, and a high throughput purification protocol was developed to generate milligram levels of pure protein without column chromatography. The resulting minicollagen-1 preparation demonstrated spectral properties similar to those observed with collagen and polyproline sequences as well as the ability to self-assemble into oriented fibers and bundles. Photo-crosslinking with Ru(II) ( bpy ) 3 2 + was used to create robust hydrogels that were analyzed by mechanical testing. Interestingly, the minicollagen-1 hydrogels could be dissolved with reducing agents, indicating that ruthenium-mediated photo-crosslinking was able to induce disulfide metathesis to create the hydrogels. Together, this work is an important first step in creating minicollagen-based materials whose properties can be manipulated through static and reconfigurable post-translational modifications.

Aqueous Assembly of Oxide and Fluoride Nanoparticles into 3D Microassemblies.

We demonstrate rapid [∼mm3/(h·L)] organic ligand-free self-assembly of three-dimensional, >50 µm single-domain microassemblies containing up to 107 individual aligned nanoparticles through a scalable aqueous process. Organization and alignment of aqueous solution-dispersed nanoparticles are induced by decreasing their pH-dependent surface charge without organic ligands, which could be temperature-sensitive or infrared light absorbing. This process is exhibited by transforming both dispersed iron oxide hydroxide nanorods and lithium yttrium fluoride nanoparticles into high packing density microassemblies. The approach is generalizable to nanomaterials with pH-dependent surface charge (e.g., oxides, fluorides, and sulfides) for applications requiring long-range alignment of nanostructures as well as high packing density.

Harvesting electrical energy from carbon nanotube yarn twist.

Mechanical energy harvesters are needed for diverse applications, including self-powered wireless sensors, structural and human health monitoring systems, and the extraction of energy from ocean waves. We report carbon nanotube yarn harvesters that electrochemically convert tensile or torsional mechanical energy into electrical energy without requiring an external bias voltage. Stretching coiled yarns generated 250 watts per kilogram of peak electrical power when cycled up to 30 hertz, as well as up to 41.2 joules per kilogram of electrical energy per mechanical cycle, when normalized to harvester yarn weight. These energy harvesters were used in the ocean to harvest wave energy, combined with thermally driven artificial muscles to convert temperature fluctuations to electrical energy, sewn into textiles for use as self-powered respiration sensors, and used to power a light-emitting diode and to charge a storage capacitor.

High-resolution monochromated electron energy-loss spectroscopy of organic photovoltaic materials.

Advances in electron monochromator technology are providing opportunities for high energy resolution (10 - 200meV) electron energy-loss spectroscopy (EELS) to be performed in the scanning transmission electron microscope (STEM). The energy-loss near-edge structure in core-loss spectroscopy is often limited by core-hole lifetimes rather than the energy spread of the incident illumination. However, in the valence-loss region, the reduced width of the zero loss peak makes it possible to resolve clearly and unambiguously spectral features at very low energy-losses (<3eV). In this contribution, high-resolution EELS was used to investigate four materials commonly used in organic photovoltaics (OPVs): poly(3-hexlythiophene) (P3HT), [6,6] phenyl-C61 butyric acid methyl ester (PCBM), copper phthalocyanine (CuPc), and fullerene (C60). Data was collected on two different monochromated instruments - a Nion UltraSTEM 100 MC 'HERMES' and a FEI Titan3 60-300 Image-Corrected S/TEM - using energy resolutions (as defined by the zero loss peak full-width at half-maximum) of 35meV and 175meV, respectively. The data was acquired to allow deconvolution of plural scattering, and Kramers-Kronig analysis was utilized to extract the complex dielectric functions. The real and imaginary parts of the complex dielectric functions obtained from the two instruments were compared to evaluate if the enhanced resolution in the Nion provides new opto-electronic information for these organic materials. The differences between the spectra are discussed, and the implications for STEM-EELS studies of advanced materials are considered.

Effects of Metal Composition and Ratio on Peptide-Templated Multimetallic PdPt Nanomaterials.

It can be difficult to simultaneously control the size, composition, and morphology of metal nanomaterials under benign aqueous conditions. For this, bioinspired approaches have become increasingly popular due to their ability to stabilize a wide array of metal catalysts under ambient conditions. In this regard, we used the R5 peptide as a three-dimensional template for formation of PdPt bimetallic nanomaterials. Monometallic Pd and Pt nanomaterials have been shown to be highly reactive toward a variety of catalytic processes, but by forming bimetallic species, increased catalytic activity may be realized. The optimal metal-to-metal ratio was determined by varying the Pd:Pt ratio to obtain the largest increase in catalytic activity. To better understand the morphology and the local atomic structure of the materials, the bimetallic PdPt nanomaterials were extensively studied by transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, X-ray photoelectron spectroscopy, and pair distribution function analysis. The resulting PdPt materials were determined to form multicomponent nanostructures where the Pt component demonstrated varying degrees of oxidation based upon the Pd:Pt ratio. To test the catalytic reactivity of the materials, olefin hydrogenation was conducted, which indicated a slight catalytic enhancement for the multicomponent materials. These results suggest a strong correlation between the metal ratio and the stabilizing biotemplate in controlling the final materials morphology, composition, and the interactions between the two metal species.

3D Printing of Regenerated Silk Fibroin and Antibody-Containing Microstructures via Multiphoton Lithography.

Regenerated silk fibroin, a biopolymer derived from silkworm cocoons, is a versatile material that has been widely explored for a number of applications (e.g., drug delivery, tissue repair, biocompatible electronics substrates, and optics) due to its attractive biochemical properties and processability. Here, we report on the free-form printing of silk-based, 3D microstructures through multiphoton lithography. Utilizing multiphoton lithography in conjunction with specific photoinitiator chemistry and postprint cross-linking, a number of microarchitectures were achieved including self-supporting fibroin arches. Further, the straightforward production of high fidelity and biofunctional protein architectures was enabled through the printing of aqueous fibroin/immunoglobulin solutions.

Redox Exfoliation of Layered Transition Metal Dichalcogenides.

Transition metal dichalcogenides (TMDs) have attracted considerable attention in a diverse array of applications due to the breadth of possible property suites relative to other low-dimensional nanomaterials (e.g., graphene, aluminosilicates). Here, we demonstrate an alternative methodology for the exfoliation of bulk crystallites of group V-VII layered TMDs under quiescent, benchtop conditions using mild redox chemistry. Anionic polyoxometalate species generated from edge sites adsorb to the TMD surface and create Coulombic repulsion that drives layer separation without the use of shear forces. This method is generalizable (MS2, MSe2, and MTe2) and effective in preparing high-concentration (>1 mg/mL) dispersions with narrow layer thickness distributions more rapidly and with safer reagents than alternative solution-based approaches. Finally, exfoliation of these TMDs is demonstrated in a range of solvent systems that were previously inaccessible due to large surface energy differences. These characteristics could be beneficial in the preparation of high-quality films and monoliths.

Creasable Batteries: Understanding Failure Modes through Dynamic Electrochemical Mechanical Testing.

Thin-film batteries that can be folded, bent, and even repeatedly creased with minimal or no loss in electrochemical performance have been demonstrated and systematically evaluated using two dynamic mechanical testing approaches for either controlled bending or creasing of flexible devices. The results show that mechanically robust and flexible Li-ion batteries (Li4Ti5O12//LiFePO4) based on the use of a nonwoven multiwalled carbon nanotube (MWNT) mat as a current collector (CC) exhibited a 14-fold decrease in voltage fluctuation at a bending strain of 4.2%, as compared to cells using traditional metal foil CCs. More importantly, MWNT-based full-cells exhibited excellent mechanical integrity through 288 crease cycles, whereas the foil full-cell exhibited continuously degraded performance with each fold and catastrophic fracture after only 94 folds. The enhancements due to MWNT CCs can be attributed to excellent interfacial properties as well as high mechanical strength coupled with compliancy, which allow the batteries to easily conform during mechanical abuse. These results quantitatively demonstrate the substantial enhancement offered in both mechanical and electrochemical stability which can be realized with traditional processing approaches when an appropriate choice of a flexible and robust CC is utilized.

Identifying the Atomic-Level Effects of Metal Composition on the Structure and Catalytic Activity of Peptide-Templated Materials.

Bioinspired approaches for the formation of metallic nanomaterials have been extensively employed for a diverse range of applications including diagnostics and catalysis. These materials can often be used under sustainable conditions; however, it is challenging to control the material size, morphology, and composition simultaneously. Here we have employed the R5 peptide, which forms a 3D scaffold to direct the size and linear shape of bimetallic PdAu nanomaterials for catalysis. The materials were prepared at varying Pd:Au ratios to probe optimal compositions to achieve maximal catalytic efficiency. These materials were extensively characterized at the atomic level using transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, and atomic pair distribution function analysis derived from high-energy X-ray diffraction patterns to provide highly resolved structural information. The results confirmed PdAu alloy formation, but also demonstrated that significant surface structural disorder was present. The catalytic activity of the materials was studied for olefin hydrogenation, which demonstrated enhanced reactivity from the bimetallic structures. These results present a pathway to the bioinspired production of multimetallic materials with enhanced properties, which can be assessed via a suite of characterization methods to fully ascertain structure/function relationships.

Bioinspired High-Performance Energetic Materials Using Heme-Containing Crystals.

Synthetic hemozoin crystals (ß-hematin) are assembled with aluminium nanoparticles (nAl) to create a nanomaterial composite that is highly energetic and reactive. The results here demonstrate that hemozoin rapidly oxidizes the nAl fuel to release large amounts of energy (+12.5 ± 2.4 kJ g(-1) ).

Electron microscopy of organic-inorganic interfaces: advantages of low voltage.

Low voltage electron microscopy has been applied to many types of materials in the last several decades with great success. The extremely strong interaction of the low voltage electrons with the sample gives high scattering contrast, however it can also result in significant damage of the specimen. Irreparable damage to several types of organic materials results from their large cross section for ionization, or radiolysis, at low voltage. Knock-on damage, which is significant at high voltages for many ceramics, semiconductors, minerals and ordered carbonaceous material such as graphene, is often reduced at low voltages. For organics which damage by radiolysis, measured beam stability increases at higher voltages, but the mass-thickness contrast is also reduced. An increased defocus can be used to generate phase contrast at higher voltages, although it comes at the expense of resolution, as the first zero in the contrast transfer function moves toward larger length scales with increasing defocus. Several examples of low and high voltage (5kV up to 300kV) experimental TEM images of organic-inorganic interfaces are used to demonstrate these phenomena.

Large scale solution assembly of quantum dot-gold nanorod architectures with plasmon enhanced fluorescence.

Tailoring the efficiency of fluorescent emission via plasmon-exciton coupling requires structure control on a nanometer length scale using a high-yield fabrication route not achievable with current lithographic techniques. These systems can be fabricated using a bottom-up approach if problems of colloidal stability and low yield can be addressed. We report progress on this pathway with the assembly of quantum dots (emitter) on gold nanorods (plasmonic units) with precisely controlled spacing, quantum dot/nanorod ratio, and long-term colloidal stability, which enables the purification and encapsulation of the assembled architecture in a protective silica shell. Overall, such controllability with nanometer precision allows one to synthesize stable, complex architectures at large volume in a rational and controllable manner. The assembled architectures demonstrate photoluminescent enhancement (5×) useful for applications ranging from biological sensing to advanced optical communication.