Study on the shielding effect of low resistance body when using transient electromagnetic to detect urban underground space.

Transient electromagnetic Method (TEM) is an efficient geophysical detection technology suitable for detection of urban near-surface space. However, its detection results are well affected by the low resistance anomaly, which interferes with the interpretation of the inversion results. This article used finite element method to simulate the entire process of urban underground pipeline under TEM detection. The causes of interference and the degree of interference under different working conditions were analyzed. The results demonstrate that low resistance anomaly in magnetic field will caused electromagnetic energy absorption and resulting eddy current losses, which lead to a distortion of the primary magnetic field in the vicinity of the pipeline, and formation of a weak field zone beneath the pipeline. The size and shape of the shielding zone are affected by burial depth, transmitter coil diameter, and anomaly size. When the burial depth exceeds 10 times the diameter of the coil or pipeline, the shielding range stabilizes at 1.5-2 times the pipeline's transverse diameter. Moreover, when the pipeline's transverse diameter exceeds twice the transmitter coil diameter, the weak field zone beneath the pipeline will transform into a strong field zone, this is due to the refractive and reflective effects of the electromagnetic field. Finally, experiments were conducted and the inverted results was found to be larger than the actual pipeline diameter, with an error margin similar to that explained by the simulation. These results have implications for high accuracy detecting underground pipelines in urban areas.

Bioelectrochemical stability improvement by Ce-N modified carbon-based cathode in high-salt stress and mechanism research.

Although microbial fuel cells (MFCs) have potential for high-salt wastewater treatment, their application is limited by poor salt tolerance, deactivation and unstable catalytic performance. This study designed Ce-C, N-C, and Ce-N modified activated carbon (Ce-N-C) based on the catalytic mechanism and salt tolerance performance of Ce and N elements to address these limitations. With activated carbon (AC) as the control, this study analyzed the stability of the four cathodes under different salinity environments using norfloxacin (NOR) as a probe to assess the effect of cathodes and salinity on MFC degradation performance. After three months, comparing with other three cathodes, the Ce-N-C cathode demonstrated superior and stable electrochemical and power generation performance. In particular, the advantages of Ce-N-C in high-salt (600 mM NaCl) environment is more significant than no-salt or low-salt. The potential of Ce-N-C-End at current density of 0 was 14.0% higher than AC-End, and the power density of the MFC with Ce-N-C cathode was 105.7 mW/m2, which was 3.1 times higher than AC. Also, the stability of NOR removal under the function of Ce-N-C improved with the increase of NaCl concentration or operation time. The CeO2(111) crystal form, N-Ce-O bond and pyridine N might be the key factors in improving the catalytic performance and salt tolerance of the Ce-N modified carbon-based cathode using XPS and XRD analysis.

Improved laccase production by Trametes versicolor using Copper-Glycyl-L-Histidyl-L-Lysine as a novel and high-efficient inducer.

A highly efficient strategy using Copper-Glycyl-L-Histidyl-L-Lysine (GHK-Cu) as a novel inducer was developed to enhance laccase production by Trametes versicolor. After medium optimization, laccase activity increased by 12.77-fold compared to that without GHK-Cu. The laccase production of 1113.8 U L-1 was obtained by scaling-up culture in 5-L stirring tank. The laccase production induced by CuSO4 was poorer than that of GHK-Cu at the same mole concentration. GHK-Cu could increase the permeability of cell membrane with less damage, and it facilitated the adsorption, accumulation, and utilization of copper by fungal cells, which was beneficial for laccase synthesis. GHK-Cu induced better expression of laccase related genes than that of CuSO4, resulting in higher laccase production. This study provided a useful method for induced production of laccase by applying GHK chelated metal ion as a non-toxic inducer, which reduced the safety risk of laccase broth and provided the potential application of crude laccase in food industry. In addition, GHK can be used as the carrier of different metal ions to enhance the production of other metalloenzymes.

Multi-factor settlement prediction around foundation pit based on SSA-gradient descent model.

With the rise of machine learning, a lot of excellent algorithms are used for settlement prediction. Backpropagation (BP) and Elman are two typical algorithms based on gradient descent, but their performance is greatly affected by the random selection of initial weights and thresholds, so this paper chooses Sparrow Search Algorithm (SSA) to build joint model. Then, two sets of land subsidence monitoring data generated during the excavation of a foundation pit in South China are used for analysis and verification. The results show that the optimization effect of SSA on the gradient descent model is remarkable and the stability of the model is improved to a certain extent. After that, SSA is compared with GA and PSO algorithms, and the comparison shows that SSA has higher optimization efficiency. Finally, select SSA-KELM, SSA-LSSVM and SSA-BP for further comparison and it proves that the optimization efficiency of SSA for BP is higher than other kind of neural network. At the same time, it also shows that the seven influencing factors selected in this paper are feasible as the input variables of the model, which is consistent with the conclusion drawn by the grey relational analysis.

Experiment on monitoring leakage of landfill leachate by parallel potentiometric monitoring method.

The accumulation of municipal solid waste (MSW) in landfills often becomes a serious pollution source of geological environment and groundwater. The geological environment is the carrier of the landfill, and also the main pollution object of the landfill. The main pollution modes of the landfill site to the surrounding geological environment are purging, flushing, leachate, etc. If the leachate leakage cannot be found and repaired in time, it will cause serious harm to the geological environment and groundwater. The cost of geological environment and groundwater sampling through borehole surveys is high. Therefore, monitoring the seepage path and migration law of leachate is of great significance for determining the pollution range of the landfill site. In this study, by adjusting the grids of different sizes and changing the flow rate of leachate, the monitoring of fluid migration of different types of leachate was strengthened. The results show that the parallel potential monitoring method can quickly reflect the location and number of leachate points and the migration law of leachate. It provides effective reference data for landfill leachate monitoring.

Sandwich-Structured Hybrid of NiCo Nanoparticles-Embedded Carbon Nanotubes Grafted on C3N4 Nanosheets for Efficient Photodehydrogenative Coupling Reactions.

Exploring cheap and efficient hybrid catalysts offers exciting opportunities for enhancing the performance of photocatalysts in the green organic synthesis field. Herein, a facile and effective approach is designed for the synthesis of a sandwich-structured hybrid in which NiCo bimetallic nanoparticles are embedded in the tip of nitrogen-doped carbon nanotubes (N-CNTs) grafted on both sides of a nitrogen deficient C3N4 (Nv-C3N4) nanosheet for photodehydrogenative coupling reactions. Such a brand-new type of sandwich-structured hybrid comprises Nv-C3N4 nanosheets and surrounding N-CNTs embedded with NiCo nanoparticles at their tips. Remarkably, the resultant hybrid exhibits integrated functionalities, abundant active sites, enhanced visible light absorption, and excellent interfacial charge transfer ability. As a result, the optimized NiCo@N-CNTs@Nv-C3N4 photocatalyst shows significantly improved photodehydrogenative coupling performance of amines to imines compared to the control single-metal-based catalysts (Ni@N-CNTs@Nv-C3N4 and Co@N-CNTs@Nv-C3N4). The mechanistic investigation through experimental and computational study demonstrates that, compared with single-metal-based hybrids, the NiCo bimetallic hybrid exhibits stronger amine adsorption and weaker photogenerated hydrogen atom adsorption, thus promoting the dehydrogenative activation of primary amines and fast generation of imines. This work presents a promising insight for designing and preparing efficient photocatalysts to trigger organic synthesis in high yields.

Fabrication of size-controlled hierarchical ZnS@ZnIn2S4 heterostructured cages for enhanced gas-phase CO2 photoreduction.

Designing and constructing advanced heterojunction architectures are desirable for boosting CO2 photoreduction performance of semiconductor photocatalysts. Herein, we have prepared hierarchical ZnS@ZnIn2S4 core-shell cages with controlled particle sizes using sequential synthesis of Zeolitic imidazolate (ZIF-8) polyhedrons, ZnS cages, and ZnIn2S4 nanosheets on the ZnS polyhedron cages. ZIF-8 polyhedrons are firstly synthesized by a liquid-phase approach. The subsequent sulfidation of the ZIF-8 polyhedrons results in the formation of ZnS polyhedron cages, which act as substrates for fabricating ZnS@ZnIn2S4 core-shell cages by growing ZnIn2S4 nanosheets. The size of ZnS cages can be tuned to optimize CO2 photoreduction performance of hierarchical ZnS@ZnIn2S4 core-shell cages. The synergy of the unique hierarchical core-shell cage-like structure and heterojunction composition endows the hybrid catalyst high incident light utilization, abundant active sites, and effective separation of photoexcited charge carriers. Benefiting from these advantages, the optimized hierarchical ZnS@ZnIn2S4 core-shell cages exhibit enhanced performance for CO2 photoreduction with the CO yield of 87.43 µmol h-1g-1 and 84.3% selectivity, which are much superior to those of single ZnIn2S4 or ZnS. Upon Au decoration, the CO2 photoreduction performance of ZnS@ZnIn2S4 core-shell cages is further enhanced because of the Schottky junctions and surface plasmon resonance effect.

Hierarchical Co0.85 Se-CdSe/MoSe2 /CdSe Sandwich-Like Heterostructured Cages for Efficient Photocatalytic CO2 Reduction.

Fabricating efficient photocatalysts with rapid charge carrier separation and high visible light harvesting is an advisable strategy to improve CO2 reduction performance. Herein, hierarchical Co0.85 Se-CdSe/MoSe2 /CdSe cages with sandwich-like heterostructure are prepared to act as efficient photocatalysts for CO2 reduction. In this study, the structure and composition of the final products can be regulated through the cation-exchange reaction in the presence of ascorbic acid. In the Co0.85 Se-CdSe/MoSe2 /CdSe cages, MoSe2 nanosheets function as a bridge to integrate Co0.85 Se-CdSe and CdSe on both sides of the MoSe2 nanosheet shell into a sandwich-like heterostructured catalyst system, which possesses multiple positive merits for photocatalysis, including accelerated transport and separation of photogenerated carriers, improved visible light utilization, and increased catalytic active sites. Thus, the optimized Co0.85 Se-CdSe/MoSe2 /CdSe cages exhibit remarkable visible-light photocatalytic performance and outstanding stability for CO2 reduction with a high CO average yield of 15.04 µmol g-1 h-1 and 90.14% selectivity, which are much higher than those of other control samples including single-component catalysts and binary hybrid catalysts. This study provides a promising way for the design and fabrication of high-efficiency photocatalysts.

Improved charge separation and carbon dioxide photoreduction performance of surface oxygen vacancy-enriched zinc ferrite@titanium dioxide hollow nanospheres with spatially separated cocatalysts.

Here, we describe the fabrication of surface oxygen vacancy-enriched ZnFe2O4@TiO2 double-shell hollow heterostructure nanospheres (ZnFe2O4@H-TiO2-x) coupled with spatially separated CoOx and Au-Cu bimetallic cocatalysts. The ZnFe2O4@TiO2 heterojunction and spatially separated dual cocatalysts can significantly promote the separation of photoinduced charge carriers. Combined with the unique hollow double-shell heterostructure characteristics and improved surface state properties, the hybrid nanospheres can efficiently adsorb and activate CO2 molecules. These advantages cause the optimized catalyst to exhibit remarkably higher gas-phase photocatalytic CO2 reduction activity than the control CoOx/ZnFe2O4/Au-Cu and ZnFe2O4@H-TiO2-x double-shell hollow nanospheres loaded with a single cocatalyst. Meanwhile, the Au-Cu bimetal effect boosts the CO2 conversion rate and CH4 selectivity. The optimized hybrid catalyst with a Au/Cu ratio of 1:1 provides a CH4 yield of 21.39 µmol g-1 h-1 with 93.8% selectivity. This work provides a rational photocatalyst design to improve CO2 conversion and CH4 selectivity.

Alternaria tenuissima Causing Leaf Spot Disease on Amygdalus triloba in Xinjiang of China.

Amygdalus triloba (Rosaceae; previously Prunus triloba) is a deciduous, flowering shrub that is widely used in the greening and beautification of lawns, parks and courtyards in China. In late May 2019, a leaf spot disease of A. triloba was observed on approximately 35% of plants in the Xinjiang Alaer city (40˚33'20''N, 81˚17'19''E). The disease symptoms began as small, suborbicular, brown spots on the leaves. As the disease progressed, the spots enlarged and coalesced into large necrotic areas and resulted in premature defoliation. Leaf sections (5 x 5 mm) from infected leaves were surface - sterilized with 75% ethanol for 30 s and 0.1% HgCl2 for 1 min, rinsed three times in sterile distilled water and then incubated on potato dextrose agar (PDA). Fifteen fungal isolates showing similar morphological characteristics were obtained by single-spore isolation. On the PDA plates, all fungal colonies had a dark olive color with loose, cottony mycelium. On the potato carrot agar, the fungus formed unbranched spore chains, but occasionally formed one or two lateral branches. Conidiophores were short, hazel-colored, septae, arising singly, and measuring 15.1 to 61.8 × 1.8 to 4.2 µm (35.2 ± 1.4 × 2.3 ± 0.1 µm, n = 50). Mature conidia were ellipsoidal to ovoid with a short conical beak at the tip, light brown with zero to three longitudinal septa and one to five transverse septa, and measuring 19.3 to 30.8 × 7.2 to 12.5 µm (21.8 ± 0.3 × 9.5 ± 0.2 µm, n = 50). Based on the cultural and morphological traits, the pathogen was preliminary identified as Alternaria tenuissima (Simmons 2007). Genomic DNA was extracted from the representative isolate YALAR-1, and the internal transcribed spacer (ITS) region, the partial coding sequence of endopolygalacturonase (endoPG), the glyceradehyde -3- phosphate dehydrogenase (GAPDA), the partial region of the histone 3 (H3) genes were amplified using primers ITS1/ITS4 (White et al. 1990), PG2b/PG3a (Andrew et al. 2009), GDF1/GDR1 (Berbee et al. 1999) and H3-1a/H3-1b (Glass and Donaldson 1995), respectively. The amplicons were sequenced and deposited in GenBank [MT459807 (ITS), MT459808 (endoPG), MT459805 (GAPDA), MT459806 (H3)]. MegaBLAST analyses revealed that our ITS, endoPG, GAPDA, and H3 sequences were 99-100% identical to those of A. tenuissima isolates in GenBank [AF347032 (ITS), KP124026 (endoPG), AY278809 (GAPDA), KF997086 (H3)], confirming the identity of the pathogen as A. tenuissima. Pathogenicity tests were performed by inoculating the fungus onto healthy, mature leaves of A. triloba in the field. Twenty five leaves (five leaves/plant) were sprayed with spore suspensions (1 × 106 spores/ml) of each fungal pathogen, and the same number of leaves were sprayed with distilled water as controls. Inoculated and control leaves were covered with clear plastic bags for 3 days. The experiment was repeated three times. Twelve days after inoculation, the observed symptoms were similar to the original symptoms and the same fungal pathogen was reisolated from the inoculated leaves and identified as A. tenuissima based on morphological features and sequence analysis. The control leaves remained asymptomatic and no fungus was isolated from these leaves. Previously, a leaf spot of A. triloba caused by Alternaria brassicae was reported in Dalian, China (Xie et al. 2017). In order to control this disease effectively, further studies are needed on the biology and ecology of A. tenuissima and A. brassicae respectively. To our knowledge, this is the first report of A. tenuissima associated with leaf spot disease on A. triloba in China. In late September 2020, the diseased plant rate increased to 38% in Alaer city. If the disease control and prevention is neglected, the landscape of Alaer city will be affected seriously. So, in order to effectively control the spread of the disease, it is urgent now to study the sensitivity of pathogen to fungicide and carry out the field efficacy trials. References: Andrew, M., et al. 2009. Mycologia. 101:95. Berbee, M. L., et al. 1999. Mycologia. 91:964. Glass, N. L., and Donaldson, G. C. 1995. Appl. Environ. Microbiol. 61:1323. Simmons, E. G. 2007. Alternaria: An Identification Manual. CBS Fungal Biodiversity Centre, Utrecht, The Netherlands. White, T. J., et al. 1990. PCR Protocols: A Guide to Methods and Applications. Academic Press, San Diego, CA. Xie, Y., et al. 2017. Liaoning Agricultural Sciences. 6: 73.