Exploring the Impact of Visual Heat Conduction Paths on Thermal Conductivity of Polymer Composites and the Practical Applications.

The theory of heat conduction paths has been widely recognized and widely studied in the research about the thermal conductivity of thermal conductive polymer composites at present. Encapsulating polymer pellets with thermally conductive fillers and processing them into thermally conductive polymer composites is a simple and effective method for constructing heat conduction paths. It is meaningful to investigate the related heat conduction mechanism of this method. Otherwise, this approach can significantly preserve the performance of the polymer substrate, making it highly valuable for practical material applications. In this work, polyethylene-octene elastomer (POE) pellets were encapsulated with thermal conductive fillers by physical absorption. Subsequently, the composite films containing heat conduction paths were fabricated using the encapsulated POE pellets through a heating press. Alumina (Al2O3), boron nitride (BN), and alumina/boron nitride hybrid (Al2O3/BN) fillers were used to prepare Al2O3@POE, BN@POE, and BN/Al2O3@POE composite films to investigate the influence of filler shapes on heat conduction path construction. The influence of the constitute and density of heat conduction paths on the thermal conductivity of composite films was analyzed by infrared thermal imaging, finite element analysis, and thermal resistance theory in detail. Owing to the reserved good adhesion and flexibility of the POE substrate, the composite films could be directly used as thermal interface materials for chip cooling, which presented a good heat dissipation effect. Furthermore, a series of integrated composite materials were prepared by the combination of encapsulated pellets with various functional films (copper foil, aluminum foil, and graphite sheet) through a one-pot heating press, exhibiting a good electromagnetic shielding effect. The performance of the composites and the corresponding preparation method demonstrate the strong significance of this research for practical applications.

A Phase Inversion-Based Microfluidic Fabrication of Helical Microfibers towards Versatile Artificial Abdominal Skin.

Microfluidic spinning technology (MST), incorporating microfluidics with chemical reactions, has gained considerable interest for constructing anisotropic advanced microfibers, especially helical microfibers. However, these efforts suffer from the limited material choices, restricting their applications. Here, a new phase inversion-based microfluidic spinning (PIMS) method is proposed for producing helical microfibers. This method undergoes a physicochemical phase inversion process, which is capable of efficiently manufacturing strong (tensile stress of more than 25 MPa), stretchable, flexible and biocompatible helical microfibers. The helical microfibers can be used to fabricate bi-oriented stretchable artificial abdominal skin, preventing incisional hernia formation and promoting the wound healing without conglutination. This research not only offers a universal approach to design helical microfibers but also provides a new insight into artificial skin.

The Rapid and Large-Scale Production of Carbon Quantum Dots and their Integration with Polymers.

Carbon quantum dots (CDs) have inspired vast interest because of their excellent photoluminescence (PL) performances and their promising applications in optoelectronic, biomedical, and sensing fields. The development of effective approaches for the large-scale production of CDs may greatly promote the further advancement of their practical applications. In this Minireview, the newly emerging methods for the large-scale production of CDs are summarized, such as microwave, ultrasonic, plasma, magnetic hyperthermia, and microfluidic techniques. The use of the available strategies for constructing CD/polymer composites with intriguing solid-state PL is then described. Particularly, the multiple roles of CDs are emphasized, including as fillers, monomers, and initiators. Moreover, typical applications of CD/polymer composites in light-emitting diodes, fluorescent printing, and biomedicine are outlined. Finally, we discuss current problems and speculate on their future development.

Macroscopic Self-Assembly of Gel-Based Microfibers toward Functional Nonwoven Fabrics.

Macroscopic self-assembly has increasingly attracted numerous concerns because of the facile fabrication of complex structures and diversified morphologies. Key challenges still remain to design high-performance building blocks to increase the efficiency and diversity of macroscopic self-assembly. Here, we designed triple noncovalent interactions (carboxyl-Zn2+ coordination, host-guest interactions, and hydrogen bonding interactions) to enhance the interactions between self-healing fibers, constructing multidimensional nonwoven fiber-based fabrics through macroscopic self-assembly without further postprocessing. Profiled from the strong interactions generated from triple noncovalent interactions, ordered two-dimensional plane and three-dimensional spiral gel fabrics were fabricated using polyvinyl pyrrolidone/gel-based fibers as building blocks toward a human motion sensor. Moreover, we demonstrated that the macroscopic self-assembly strategy is universal to construct three-dimensional film-based fabrics toward wound dressing based on the triple noncovalent interactions between two-dimensional films. This macroscopic self-assembly approach provides an alternative strategy to fabricate gel fabrics for various applications.

Multifunctional Micro/Nanoscale Fibers Based on Microfluidic Spinning Technology.

Superfine multifunctional micro/nanoscale fibrous materials with high surface area and ordered structure have attracted intensive attention for widespread applications in recent years. Microfluidic spinning technology (MST) has emerged as a powerful and versatile platform because of its various advantages such as high surface-area-to-volume ratio, effective heat transfer, and enhanced reaction rate. The resultant well-defined micro/nanoscale fibers exhibit controllable compositions, advanced structures, and new physical/chemical properties. The latest developments and achievements in microfluidic spun fiber materials are summarized in terms of the underlying preparation principles, geometric configurations, and functionalization. Variously architected structures and shapes by MST, including cylindrical, grooved, flat, anisotropic, hollow, core-shell, Janus, heterogeneous, helical, and knotted fibers, are emphasized. In particular, fiber-spinning chemistry in MST for achieving functionalization of fiber materials by in situ chemical reactions inside fibers is introduced. Additionally, the applications of the fabricated functional fibers are highlighted in sensors, microactuators, photoelectric devices, flexible electronics, tissue engineering, drug delivery, and water collection. Finally, recent progress, challenges, and future perspectives are discussed.

Rapid preparation of auto-healing gels with actuating behaviour.

Gels with multiple stimuli-responsive actuating behaviour have shown great potential in many applications. Nevertheless, facile approaches to rapidly preparing gel actuators are still highly needed, and obtaining gels possessing both actuating and auto-healing capabilities remains a challenge. Herein, we report the rapid preparation of gel actuators with a self-healing ability. Dual-component gels, composed of poly(BA-co-VI-co-AM) (G-1) and poly(BA-co-AA-co-AM/ß-CD) (G-2) (BA = butyl acrylate, VI = N-vinyl imidazole, AM = acrylamide, AA = acrylic acid, ß-CD = ß-cyclodextrin), are prepared within 10 minutes (min) via biphase frontal polymerization (FP). Both G-1 and G-2 gels show excellent intrinsic self-healing properties based on hydrogen bonds, with healing efficiencies of 91% and 97%, respectively; self-healing between G-1 and G-2 also occurs due to hydrogen bonding and host-guest interactions. Moreover, dual-component gels, in terms of G-1 and G-2 bilayer gel flowers and strips, heterogeneous healed bilayer gel strips, and microfluidic-directed bilayer gel microsphere ensembles, all show actuating behaviour in acidic, alkaline and organic solutions, with actuation degrees up to 96% in 5 min. The actuation mechanism is also proposed. This work might provide new insights into fast synthesis of self-healing dual-component gels towards application in the actuator field.

Host-guest supramolecular assembly directing beta-cyclodextrin based nanocrystals towards their robust performances.

Fluorescent CdTe nanocrystals (NCs) capped with beta-cyclodextrin (ß-CD) are successfully synthesized by host-guest supramolecular assembly of the hydrophobic alkyl chains of N-acetyl-l-cysteine (NAC) on the surface of CdTe NCs and eco-friendly ß-CD via the promising simple hydrothermal method in our experiments. The as-prepared NCs display better stability and lower toxicity compared with traditional those only capped with NAC. Specially, cytotoxicity experiments to human umbilical vein endothelial cells in vitro and zebrafish embryo toxicological tests in vivo are performed to determine the toxicity of CdTe NCs. For their practical applications, the promising red-luminescent NCs are employed as stable and low poison red phosphors to fabricate white light-emitting diodes (WLEDs) with remarkable color-rendering index (CRI) being 91.6. This research offers significance for solving the difficulty in toxicity and instability of heavy metal based NCs, which has potential applications in future optoelectronic devices and biomarkers.