RESUMEN
Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 µmol·g-1·h-1, which is 10 times higher than that of Thin-CPP (538.49 µmol·g-1·h-1). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔEST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 â T1 and was beneficial to the photocatalytic decomposition of H2O. This study presents a novel concept for developing a hybrid system for preparation of H2 by photocatalysis with effectiveness, sustainability, and economy.
RESUMEN
Herein, a zeolitic imidazole framework (ZIF-67) composite was prepared by a rapid, simple and inexpensive situ hybridization technique applying polyurethane sponge (PU) as support, which was designated as ZIF-67-PU. The ZIF-67 nanoparticle was successfully supported on the surface of sponge skeletons mainly through electrostatic attraction as well as probable π-π stacking interactions with PAM modification of the sponge. The resultant ZIF-67-PU exhibited a remarkably enhanced U(VI) elimination capacity of 150.86 mgâg-1 on the basis of the Langmuir isotherm model, in comparison to pristine sponge. Additionally, the mechanism for U(VI) elimination was mainly achieved through the complex reaction between C-N(H)/-OH groups in ZIF-67 and U(VI), based on XPS investigations. ZIF-67-PU represents a simple, feasible and low-cost disposal option for preparing ZIF-coated sponges of any shape that can enhance the U(VI) elimination capacity. Furthermore, this approach can be widely applied to the preparation of various kinds of MOF-sponges through this situ hybridization technique.
RESUMEN
One-dimensional shaving-like BiVO4 nanobelts were successfully synthesized via the oxide hydrothermal method (OHS), using V2O5 and Bi2O3 as raw materials and PEG 10000 (polyethylene glycol 10000) as a template. Multiple techniques, including XRD, SEM, TEM, HRTEM, UV-Vis, XPS, and photoelectrochemical measurements, were applied to characterize the obtained materials. The thickness of the BiVO4 nanobelt was approximately 10 nm, while the width was approximately 500 nm. EIS results showed that visible-light illumination caused the photogenerated charge of the BiVO4 nanobelts to have a faster transfer and a higher separation efficiency. Photocatalytic experiments indicated that with BiVO4 nanobelts as a catalyst, the degradation rate of MB (methylene blue) was close to 92.4%, and it disintegrated after two hours. Moreover, the pseudo-first-order kinetic model can be used to describe the photodecomposition reaction of MB catalysed by BiVO4 nanobelts. And this excellent photocatalytic activity of the shaving-like BiVO4 nanobelts may be related to their special morphology, narrow band gap (~2.19 eV), faster transfer and the separation efficiency of the photogenerated charge, leading to strong absorption in the visible region and improving the separation of the photogenerated electron-hole pairs. These novel monoclinic BiVO4 nanobelts exhibited great photocatalytic activity and are thus a promising candidate for application in visible-light-responsive photocatalysts.
RESUMEN
Two new Schiff base fluorescent probes (L and S) were designed for selectively detecting Al3+ ions in aqueous medium. Structural characterization of the purely synthesized compounds was acquired by IR, 1H NMR and 13C NMR. Moreover, their photochromic and fluorescent behaviors have been investigated systematically by UV-Vis absorption and fluorescence spectra. The two probes have both high selectivity and sensitivity toward Al3+ ions in aqueous medium. The 2:1 stoichiometry between the Al3+ and probes was verified by Job's plot. Moreover, the limits of detection (LOD) for Al3+ by L and S were 1.98 × 10-8 and 4.79 × 10-8 mol/L, respectively, which was much lower than most previously reported probes. The possible recognition mechanism was that the metal ions would complex with Schiff base probes because of the prevalence of the species optimal for complex formation, inhibiting the structural isomerization of conjugated double bonds (-C=N-), inhibiting the proton transfer process in the excited state of the molecules and resulting in changes of its color and fluorescence behavior. Furthermore, the probes will have potential applications for selectively, detecting Al3+ ions in the environmental system with high accuracy and providing a new strategy for the design and synthesis of multi-functional sensors.
RESUMEN
In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe3O4 composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe2O3 as the precursors. The morphologies of the as-prepared C@Fe3O4 composites, inherited from their corresponding precursors of α-Fe2O3, survived from the annealing treatments, were characterized by the field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The C@Fe3O4 composites resisted to oxidation, acidification and aggregation, exhibiting porous structures and ferromagnetic properties at room temperature. Moreover, the adsorption performance of the C@Fe3O4 composites was evaluated by absorbing MB (methylene blue) in liquid environment. Experiments indicated that the C@Fe3O4 composites exhibited highly enhanced adsorption capacities and efficiencies as compared with their corresponding precursors of α-Fe2O3. This generalized method for the synthesis of C@Fe3O4 composites provides promising applications for the highly efficient removal of MB from industrial effluents.
Asunto(s)
Azul de Metileno , Purificación del Agua , Azul de Metileno/química , Purificación del Agua/métodos , Adsorción , Alginatos/química , CarbonoRESUMEN
This work aims to study the antioxidant interactions between S-allyl-L-cysteine (SAC) and six natural polyphenols (quercetin, caffeic acid, sinapic acid, catechin, ferulic acid, and 3,4-dihydroxybenzoic acid) through the measurement of free-radical-scavenging activity of 1,1-diphenyl- 2-picryl-hydrazyl (DPPH), the radical-cation-scavenging activity of 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS), and reducing power. Among the six natural polyphenols, caffeic acid showed the strongest synergistic effect with SAC according to DPPH and reducing power assays. Further investigations based on the results of interaction index and isobologram analysis showed that the antioxidant activity (DPPH, ABTS, and reducing power) of the combination of caffeic acid with SAC presented an increase with the raising of their individual concentrations in their mixture and along with a dose-response manner. The best synergistic effect between caffeic acid and SAC based on DPPH, ABTS, and reducing power assays were observed at the ratio of 1:20, 1:35, and 1:70, respectively. The excellent synergic antioxidant activity of the combination of caffeic acid with SAC in our study suggests SAC has a more broad and effective application prospects in food field.
Asunto(s)
Antioxidantes , Polifenoles , Antioxidantes/farmacología , Cisteína , Polifenoles/farmacología , Quercetina , Ácidos SulfónicosRESUMEN
In this study, a new kind of thin 2D MOFs nano-sheets (MNS) was successfully prepared through complexation between 2-methylimidazole and Cu(II) by a one-step, and cost-effective route. The structural morphologies can be tuned by adjusting the ratio of MeOH/H2O. The synthesized MNS (MNS-1, MNS-2, MNS-3 and MNS-4) were fully characterized and the results indicated that the synthesized MNS were freestanding and possess micro-sized lateral dimensions and nanoscale thickness of sub-25 nm. All the obtained MNS display great performance with the adsorption capacity hierarchy of MNS-2 (591.79 mg·g-1) > MNS-3 (409.49 mg·g-1) > MNS-4 (387.07 mg·g-1) > MNS-1 (384.84 mg·g-1) at pH Ë 6.0, and 298 K. The thermodynamic parameters indicated the exothermic and spontaneous nature of U(VI) immobilization. The U(VI) immobilization mechanism was achieved through the complexation between U(VI) and C-N(H) /-OH groups. This work supplies a facile and purposeful approach for developing 2D MOFs nano-sheets toward a highly efficient immobilization of U(VI), and it also promotes the preparation of structure-based design of nanomaterials for radionuclide-containing-medium pretreatment.
RESUMEN
Although the aggregation of graphene oxide (GO) has been widely researched, the influence of the GO size on the homoaggregation behavior and its interaction with environmental media are still unexplored. In this work, critical coagulation concentration (CCC) values for GO with different sizes, from micro to nanosheet, were measured with NaCl and CaCl2 electrolytes, and the results indicated that GO with the largest size presented the smallest CCC value. Aluminum oxide (Al2O3) was selected as a natural solid particle representative to mimic the interaction between GO and environmental media. Batch experiments were conducted in solution with different pH and ionic strength. Results indicated that the attachment capacity of large GO onto Al2O3 particles was greater than that of small GO. The experimental data were well fitted with Freundlich model. The electrostatic attraction and hydrogen-bonding interaction dominated the interaction process between GO and Al2O3. These findings are important for better understanding in the environmental fate and transport of GO.
Asunto(s)
Grafito/química , Óxidos/química , Agua/química , Óxido de Aluminio/química , Ambiente , Enlace de Hidrógeno , Cloruro de Sodio/químicaRESUMEN
In this study, magnetic Fe3O4 nanoparticles (MNP) modified with O-phosphorylethanolamine (O-PEA) were successfully prepared by non-thermal plasma induced method with different treatment times. The raw and modified MNP were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrophotometer (FT-IR), and vibration sample magnetometer (VSM). The modified MNP samples show higher adsorption capacity for U(VI) removal and longer treatment time results in higher adsorption capacity and efficiency. The experimental parameters were optimized by means of the response surface methodology to improve the removal efficiency of U(VI) by the modified adsorbents from aqueous solutions. The O-PEA modified MNP with 120â¯min treatment time shows the highest adsorption capacity with 228.17â¯mgâ g-1 among the five samples at 293.15â¯K. Thermodynamic studies reveal that the adsorption process of U(VI) onto O-PEA modified MNP is endothermic and spontaneous. XPS studies indicate that the U(VI) removal is fulfilled through the binding interactions between U(VI) and NH2, OH and phosphate groups on the modified MNP surface. This work not only provides a simple, convenient and cost-effective way for water treatment by plasma modification, but also provides a new insight into preparing promising adsorbents to achieve magnetic separation from aqueous solution.
RESUMEN
Atmospheric pressure nonequilibrium plasma jet has been applied to the synthesis of [60]fullerene oxides (C60On) for the first time. C60O and C60O2 were produced and isolated in high yields up to 44% and 21%, respectively. The structural assignment of C60O was confirmed by comparison with the reported spectroscopic data. Theoretical calculations of 13C NMR chemical shifts for eight isomers of C60O2 were performed and compared with the experimental data to assign the most possible structure for the obtained C60O2 dominantly as an e isomer.
RESUMEN
In this paper, biochar derived from poplar catkins was used as an economical and renewable adsorbent for adsorption organic and inorganic pollutants such as, dyes, organic compounds, and heavy metal ions from wastewater. Mesoporous activated carbonized poplar catkins (ACPCs) were produced from char as a by-product by carbonized poplar catkins (CPCs). With their high surface area, ACPCs exhibited the maximum adsorption capacities of 71.85 and 110.17 mg/g for the removal of inorganic U(VI) and Co(II). Compared other biochars adsorbents, ACPCs can also adsorb organic pollutants with the maximum adsorption capacities of 534, 154, 350, 148 and 384 mg/g for methylene blue (MB), methyl orange (MO), Congo red (CR), chloramphenicol (CAP) and naphthalene. The adsorption of organic pollutants was fitted with pseudo-first order, pseudo-second order, and intra-particle diffusion kinetic models figure out the kinetic parameters and adsorption mechanisms. Langmuir adsorption isotherm was found to be suitable for Co(II) and U(VI) adsorption and thermodynamic studies indicated adsorption processes to be endothermic and spontaneous. The adsorption process includes both outer-sphere surface complexes and hydrogen-bonding interactions. The results showed that biochar derived from poplar catkins was a potential material to remove pollutants in wastewater.
RESUMEN
Controlled synthesis of well-shaped nanocrystals is of significant importance to understand the surface-related properties. Herein, hierarchical Bi2WO6 particles with different morphologies, such as flower-like and pancake-like morphologies were selectively prepared using a simple fluoride ion-assisted hydrothermal process. Morphological modulation of the samples could be easily realized by controlling the initial amount of NH4F. The effect of NH4F as well as the formation mechanism of these Bi2WO6 hierarchical structures were systematically investigated. The morphological control of the final products are proved to be a kinetic control of the reaction, which is closely related to the concentration of fluoride ion in the solution. The as-obtained hierarchical Bi2WO6 particles exhibit different visible-light-driven photo-catalytic activities for the degradation of Rhodamine-B (RhB). The differences in photo-catalytic activities among the as-obtained samples are associated the surface adsorption properties, which result from the synthetic conditions.