Effect of ultrasonic agitation on marginal adaptation, intratubular penetration and bonding strength of calcium-silicate-based endodontic sealers: A laboratory study.

The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.

The presence of smear layer affects the antimicrobial action of root canal sealers.

AIM: To assess the chemical and microstructural characteristics of dentine after the use of two irrigation protocols and correlate this with the antimicrobial properties of hydraulic calcium silicate cement (HCSC) sealers and changes to the dentine structure/chemistry after sealer placement. METHODOLOGY: Two irrigation protocols - Protocol A using 2% NaOCl used 5 mL/5 min and Protocol B with 2% NaOCl (5 mL/5 min) followed by 17% EDTA (5 mL/3 min) - were used to prepare dentine. The chemical and microstructural changes following irrigation were assessed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared (FT-IR) spectroscopy (n = 5) on dentine obtained from the mid-root and coronal parts of extracted human teeth. Four sealers (AH Plus, BioRoot, MTA Fillapex, TotalFill) were characterized by SEM/EDS (n = 3). The ability of the sealers to eradicate intratubular Enterococcus faecalis biofilms was assessed by live/dead dye and confocal laser scanning microscopy to measure the percentage of living cells. The effect of combined irrigation and root filling on dentine was assessed by SEM and EDS analysis (n = 5). Statistical analysis was undertaken using one-way anova and a number of post hoc tests to detect intergroup differences. The F-test was used for comparison of variances in the microbiology testing. RESULTS: The use of NaOCl alone left the smear layer intact, with traces of chlorine remaining on dentine. The use of BioRoot sealer restored the calcium levels of dentine which had been depleted by the irrigation with EDTA. BioRoot exhibited antimicrobial properties against intratubular bacteria even in the presence of smear layer (Protocol A). Smear layer removal improved the bactericidal effect of all sealers and Ca2+ leaching. The use of a chelating agent was important for the intratubular sealer penetration for AH Plus but not the other sealers. CONCLUSION: The removal of smear layer was necessary for penetration of AH Plus into the dentinal tubules. BioRoot was a more effective sealer in reducing the bacterial load in the dentinal tubules than the other materials tested and the presence of smear layer did not affect its activity.

A laboratory study of the scouting ability of two reciprocating glide path instruments in mesial root canals of extracted mandibular molars.

AIM: To evaluate in a laboratory setting the performance of two reciprocating glide path systems, WaveOne Gold Glider (WO) and R-Pilot (RP), to create a glide path in mesial root canals of mandibular molars and to assess the torsional resistance of instruments after performing the glide path. METHODOLOGY: A total of 60 mesial root canals of extracted human mandibular molars were divided into two groups (n = 30) according to the glide path system to be used. The data from the volume of each canal, acquired by microcomputed tomography (micro-CT), were validated statistically for the anatomical pairing of the groups. Preparation time, frequency in gaining apical patency, plastic deformation rate of instruments, and canal transportation and centring ability were recorded and compared statistically. The torsional fatigue of the instruments after use was also evaluated. Data were analysed using Fisher's exact test and Mann-Whitney U-test with a 5% significance level. RESULTS: No significant differences were found between groups regarding the time required to perform the glide path, the frequency distributions of the canals classified as patent and the instruments with plastic deformation after use (P > 0.05). No significant differences were found between groups regarding the degree of canal transportation and centring ability at the cervical, middle and apical thirds (P > 0.05). The RP groups had significantly greater maximum torsional strength values compared with the WO groups (P < 0.05). The used WO group had greater angular deflection to fracture when compared to the new WO group (P < 0.05). A significant difference was also found in the percentage of loss of angular deflection in a comparison of the WO group with the RP group (P < 0.05). CONCLUSIONS: The WO and RP instruments performed the same in terms of preparation time, plastic deformation, gaining apical patency, degree of canal transportation and centring ability. The RP instruments had greater torsional strength, less angular deflection and lower percentage of loss in angular deflection than the WO. The used WO group had the greatest angular deflection values.

Shaping ability of hand, rotary and reciprocating files in primary teeth: a micro-CT study in vitro.

PURPOSE: Compare canal transportation and dentin removal using micro computed tomography (micro-CT) and measure instrumentation time in the root canal preparation of primary molars using K-files, ProDesign Logic and Reciproc files. METHODS: A representative sample of 81 root canals of primary molars was randomised into three groups: K-files (#15-40), ProDesign Logic (#25) and Reciproc (R25). A single-trained operator prepared all root canals. A standardised micro-CT evaluation was performed before and after instrumentation using the CTan® program. Instrumentation time was also recorded. Statistical analysis involved one-way ANOVA, Tukey's post hoc test, Kruskal-Wallis test and Dunn's test, considering a 5% level of significance. RESULTS: Reciproc led to more canal transportation than K-files and ProDesign Logic (p < 0.001) in middle third, whereas K-files led to the most canal transportation in the apical third (p = 0.017). ProDesign Logic and Reciproc removed less dentin on the opposite side of the root curvature in the apical third compared to K-files (p = 0.008). Instrumentation time was better with ProDesign Logic and Reciproc than K-files (p < 0.001). CONCLUSION: ProDesign Logic demonstrated good results with regard to canal transportation and required less instrumentation time in primary molars. Reciproc and K-files led to the most canal transportation in the middle and apical third, respectively.

Effects of heat in the properties of NaOCl alone and mixed with etidronate and alkaline tetrasodium EDTA.

AIM: To assess the free available chlorine concentration (FAC), organic tissue dissolution and smear layer removal capacity of sodium hypochlorite (NaOCl) alone and when mixtured with etidronate (HEDP) and tetrasodium EDTA (Na4 EDTA), and heated to different temperatures. METHODOLOGY: Mixtures at 1 : 1 ratio of 5% NaOCl with distilled water (considered NaOCl alone), 18% HEDP or 10% Na4 EDTA were heated to 25 °C, 37 °C, 48 °C and 60 °C. The FAC in the mixtures was assessed at 5, 10, 20, 30, 60 and 120 min. Samples of bovine muscle tissue (n = 10) were prepared with similar size and weighed before and after 5, 10 and 15 min of immersion in the mixtures heated to the different temperatures to verify organic matter dissolution. The intergroup results were compared statistically using one-way analysis of variance (anova) and intragroup by two-way analysis of variance (anova), both followed by Tukey's multiple-comparison test (α < 0.01). Bovine dentine blocks (n = 10) were analysed by scanning electron microscopy before and after immersion in the mixtures, and the time taken to remove the smear layer from the surfaces of the samples was determined. The Friedman test was used to compare the scores of the same group (α < 0.01), and the Kruskal-Wallis test with Dunn's post hoc was used to compare the different groups (α < 0.01). Saline solution was used as a control in the experiments of tissue dissolution and smear layer removal, RESULTS: Heating NaOCl alone did not affect its FAC. The higher the temperature of the mixtures with the chelators, the lower the FAC. Organic tissue dissolution was improved by increases in temperature of NaOCl alone and its mixture with HEDP (P < 0.01); however, the mixture with Na4 EDTA had no improvement (P > 0.01). Smear layer removal by NaOCl alone was enhanced by heating resulting in lower scores in some samples and became more rapid in the mixtures with the chelators. The saline solution did not promote tissue dissolution nor smear layer removal (P > 0.01). CONCLUSION: In this laboratory study, heating NaOCl alone or when mixed with HEDP improved its capacity to dissolve organic matter and remove the smear layer. However, the mixture with HEDP required frequent refreshment to retain these effects when heated. Due to the acceleration in the reaction between the irrigants, very rapid reductions in the free available chlorine in the mixtures with Na4 EDTA heated to the different temperatures occurred.

Effectiveness of five instruments when removing calcium hydroxide paste from simulated internal root resorption cavities in extracted maxillary central incisors.

AIM: To evaluate the effectiveness of five instruments used for irrigant agitation during the removal of calcium hydroxide [Ca(OH)2 ] paste in simulated internal root resorption (IRR) cavities created in extracted maxillary central incisors. METHODOLOGY: Seventy maxillary central incisors with a single canal were selected. The canals were accessed and instrumented with Reciproc R50, then the roots were split in the bucco-lingual direction and the halves separated. Simulated IRR cavities were created, in both halves of the roots, 5 mm from the apex with a spherical bur. The specimens were reconstructed with cyanoacrylate glue and allocated into seven groups: negative control - no treatment; positive control - filled with Ca(OH)2 without performing any irrigation protocol; the other groups were divided according to the instrument used for irrigant agitation, namely: Ultrasonic, EndoActivator® , EDDY® , XP-endo® Finisher and XP-endo® Shaper. The specimens were cleaved and analysed using optical microscopy and scanning electron microscopy, to compare the Ca(OH)2 remnants between them. Then, the IRR cavities created by the burs were cleaned and subjected to a protocol of demineralization with 20% nitric acid, the roots reconstructed, and the irrigant agitation methods, as well as the microscopic analysis was repeated. Analysis of the images of Ca(OH)2 remaining in the simulated IRR cavities after irrigation was performed by two calibrated examiners based on a previously established scoring system. The data were statistically compared by Kruskal-Wallis test, Mann-Whitney U-test and Wilcoxon tests, with the significance level set at 5%. RESULTS: There was a significant difference in the effectiveness of the instruments in relation to the cavity creation method (bur vs. bur/acid) and evaluation method (optical microscopy and scanning electron microscopy) (P < 0.05). The XP-endo® Finisher and EDDY® groups were associated with significantly more effective removal of Ca(OH)2 when the IRR cavities were created using the acid protocol and analysed by scanning electron microscopy. CONCLUSION: None of the instruments tested were able to completely remove the Ca(OH)2 paste from the simulated IRR cavities; however, the EDDY® and XP-endo® Finisher removed more Ca(OH)2 in the bur/acid cavity creation method analysed by scanning electron microscopy.

Thermographic assessment of saddles used in Mangalarga Marchador horses / Avaliação termográfica de selas utilizadas em cavalos da raça Mangalarga Marchador

Poor saddle-fitting is one of the main causes of back pain in horses. Mangalarga Marchador is a popular breed in Brazil, being used mainly for pleasure riding and sports. This study aimed to thermographically assess saddles used in horses of this breed. Thermographic images were obtained from 18 saddles of animals from different categories during a Mangalarga Marchador National Exposition. The evaluation was based on three parameters: contact area symmetry, dorsal midline interaction and total skin contact area (25%, 50%, 75% or 100%). Contact area asymmetry was observed in 83.3% of saddles. Dorsal midline interaction was observed with the same frequency. Only 22.2% of saddles assessed in the present study had panels with contact areas greater than 50%. Based on the results of this essay it can be concluded that thermography is a useful tool for the evaluation of saddle contact area with the back of horses and that there is a high frequency of fitting unconformities in saddles used in Mangalarga Marchador horses.(AU)

O ajuste inadequado da sela é um dos principais causadores de lombalgias em equinos. A raça Mangalarga Marchador está entre as mais populares do Brasil, sendo muito utilizada para cavalgadas e prática de esportes. O presente estudo teve como objetivo avaliar termograficamente as selas utilizadas em cavalos dessa raça. Para tal, foram realizadas imagens termográficas de 18 selas de animais de diversas categorias durante uma Exposição Nacional do Cavalo Mangalarga Marchador. A avaliação foi realizada baseando-se em três parâmetros: simetria da área de contato, interação com a linha média dorsal e área total de contato com a pele (25%, 50%, 75% ou 100%). Em 83,3% das selas avaliadas foi observada assimetria da área de contato. A interação com a linha média dorsal foi observada com a mesma frequência. Apenas 22,2% das selas avaliadas no presente estudo tinham suadouros com área de contato maior que 50%. Com base nos resultados obtidos neste trabalho, conclui-se que a termografia é uma ferramenta útil na avaliação do contato das selas com o dorso dos cavalos e que existe alta frequência de inconformidades no ajuste de selas utilizadas na raça Mangalarga Marchador.(AU)

Effect of larger apical size on the quality of preparation in curved canals using reciprocating instruments with different heat thermal treatments.

AIM: To evaluate the influence of larger apical canal enlargement in curved canals using reciprocating systems subjected to various heat treatments. METHODOLOGY: Ninety mandibular premolars with root curvatures ranging from 20° to 30° were selected and scanned by microcomputed tomography (micro-CT) before and after root canal preparation with reciprocating systems (n = 30): Reciproc Blue (RB size 25, .08 taper and size 40, .06 taper; VDW, Munich, Germany), WaveOne Gold (WOG size 25, .07 taper and size 35, .06 taper; Dentsply Sirona, Ballaigues, Switzerland) and ProDesign R (PDR size 25, .06 taper and size 35, .05 taper; Easy Dental Equipment, Belo Horizonte, Brazil). Canal transportation, untouched areas, and apical and total root canal volumes were measured. Statistical analysis was performed with the nonparametric Kruskal-Wallis and Dunn's tests and a significance level set at 5%. RESULTS: The between-group comparison revealed no significant difference in untouched areas, canal transportation, and apical root canal volume among the groups (P > 0.05). However, WOG size 35, .06 taper was associated with a significant increase in the percentage of total canal volume in comparison to the PDR size 35, .05 taper (P < 0.05). The within-group comparison revealed a significant decrease in untouched areas, increase in apical and total root canal volume for all groups when using a larger instrument (P < 0.05). There was no significant difference in transportation among the groups and when a larger apical preparation was created (P > 0.05). CONCLUSIONS: Larger apical enlargement of curved canals was associated with a decrease in untouched areas, an increase in root canal volume and maintenance of canal trajectory. In addition, all systems were safe and provided similar root canal shapes.

Antimicrobial action of photodynamic therapy in root canals using LED curing light, curcumin and carbopol gel.

AIM: To evaluate the capacity of carbopol gel to maintain the intensity of a LED curing light (blueLED) along the length of prepared root canals in bovine teeth, and to assess the antimicrobial capacity of curcumin photoactivated by a LED curing light in the presence of carbopol gel. METHODOLOGY: Experiment 1: Eight straight roots of bovine incisors were standardized to a length of 15 mm, and the root canals instrumented up to a size 120 K-file. The LED curing light was irradiated inside the root canals using an aluminium collimator (1.5 mm in diameter) placed at the orifice (n = 8). Initially, the irradiation was performed in empty root canals and then repeated with the root canals filled with carbopol gel. Simple standardized photographs of the roots were taken with a digital camera in the mesial perspective during the irradiation procedure and the images analysed in OriginLab software to verify the light intensity along the length of the root. Experiment 2: Twenty dentine blocks were obtained from the cervical third of bovine incisors using a trephine bur. Biofilms were induced for 21 days on the blocks using Enterococcus faecalis (ATCC 4083) at 109 cells mL-1 . The blocks were treated according to the groups (n = 5): positive control; standard PDT (methylene blue + diode Laser); curcumin; LED curing light; and curcumin + LED curing light. After the treatment, the samples were dyed with Live/Dead BacLight Bacterial Viability solution and fluorescence images were obtained by Confocal Scanning Laser Microscopy (CSLM). Experiment 3: Thirty-two roots of bovine incisors were prepared as described in experiment 1. Their dentinal tubules were contaminated and the root canals treated according to the groups (n = 8): positive control; standard PDT; curcumin + LED curing light; curcumin + carbopol gel + LED curing light. The specimens were sectioned longitudinally and the split roots were treated with the Live/Dead dye to obtain fluorescence images by CSLM. All images were processed using BioImageL software to measure the percentage of viable bacteria and the data analysed statistically using the nonparametric Kruskal-Wallis test (α < 0.05). RESULTS: In Experiment 1, carbopol gel did not improve the intensity of LED light transmission along the root canal. In Experiment 2, a significant decrease (P < 0.05) in bacterial viability occurred in the following order: positive control < only LED curing light < only curcumin < curcumin + LED curing light = standard PDT; and in Experiment 3 positive control = curcumin + LED curing light ≤ curcumin + gel + LED curing light ≤ standard PDT. CONCLUSION: Similar disinfection effectiveness was obtained using curcumin + LED curing light and methylene blue + 660 nm LASER (standard PDT). The use of carbopol gel did not favour a greater transmission of LED light along the root canal and also resulted in less bacterial killing when used in endodontic PDT.

The ability of three nickel-titanium mechanized systems to negotiate and shape MB2 canals in extracted maxillary first molars: a micro-computed tomographic study.

AIM: To evaluate the influence of three engine-driven NiTi file systems manufactured from different NiTi alloys for the preparation of second mesiobuccal (MB2) canals in extracted maxillary first molars using a micro-computed tomographic (micro-CT) scanner. METHODOLOGY: Thirty maxillary molars with two canals in the mesiobuccal root were selected and randomly divided into three groups (n = 10): Reciproc [REC; size 25, .08 taper; VDW, Munich, Germany], ProDesign R [PDR; size 25, .06 taper; Easy, Belo Horizonte, Brazil] and Mtwo [MO; size 25, .06 taper; VDW, Munich, Germany]. Before and after root canal preparation of the MB2 canal, the teeth were scanned using a micro-CT to evaluate canal transportation, centring ability, dentine thickness and volume change. The working time to achieve working length was also evaluated. All parameters were compared statistically using the Kruskal-Wallis and Dunn test for multiple comparisons, with a significance level of 5%. RESULTS: There was no significant difference amongst the groups regarding canal transportation and centring ability (P > 0.05). However, the PDR size 25, .06 taper group had significantly lower canal volume and volume of dentine removal compared with a MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). A root perforation was detected in MO size 25, .06 taper and REC size 25, .08 taper groups, respectively. Regarding the working time, the PDR size 25, .06 taper required a significantly longer time to achieve working length than MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). CONCLUSIONS: All NiTi systems had similar canal transportation, centring ability and increase in apical volume after preparation of MB2 canals. However, the PDR size 25, .06 taper had less volume of dentine removal, absence of root canal perforation and required a longer time to accomplish the root canal preparation.

Effect of the combination of several irrigants on dentine surface properties, adsorption of chlorhexidine and adhesion of microorganisms to dentine.

AIM: To investigate the effects of combinations of several irrigants on the roughness and wettability of dentine, adhesion of Enterococcus faecalis and Candida albicans and adsorption of chlorhexidine (CHX) to the dentine. METHODOLOGY: Bovine dentine samples were prepared and their surface roughness standardized. The samples were distributed in groups (n = 10) and subjected to one of the following irrigation protocols: G1 - saline solution; G2 - sodium hypochlorite (NaOCl); G3 - NaOCl + ethylenediaminetetraacetic acid (EDTA); G4 - NaOCl + peracetic acid (PAA); G5 - NaOCl + 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP); G6 - NaOCl + EDTA + CHX; G7 - NaOCl + PAA + CHX; G8 - NaOCl + HEDP + CHX; and G9 - mixture of NaOCl + HEDP. After treatments, roughness and wettability were measured. In order to evaluate the adhesion of microorganisms to dentine, new dentine samples were prepared and after 2 h of contact with the microorganisms, were analysed using a confocal laser scanning microscope and the number of microorganisms adhering to the surfaces were determined. Absorption spectra were collected by attenuated total reflectance of Fourier-transform infrared spectroscopy before and after immersion of other dentine samples in each solution of G6, G7 and G8 and in a solution of 2% CHX at various time intervals. The areas of the band associated with CHX with the peak at 1492 cm-1 were calculated between 1479 and 1500 cm-1 of the spectral range. The data obtained in all experiments were subjected to one-way ANOVA (α < 0.05). The values of the CHX band were also subjected to one-way repeated measures ANOVA (α < 0.05). RESULTS: Saline solution, NaOCl, HEDP and CHX did not alter the roughness of the dentine (P > 0.05), whilst EDTA and PAA did (P < 0.05). Dentine surface wettability increased after the use of all irrigants compared to saline solution (P < 0.05), with HEDP causing the greatest increases (P < 0.05). The adhesion of E. faecalis was favoured on surfaces treated with only saline solution and NaOCl, and on samples that had decalcifying agents as the final irrigant (P < 0.05). The adhesion of C. albicans was highest on surfaces treated with only saline solution and on surfaces that had NaOCl used as the last irrigant (P < 0.05). The use of CHX as a final irrigant reduced the adhesion of both microorganisms. The roughness and wettability did not influence the adhesion of the microorganisms tested. The adsorption of CHX to the dentine was significant after 1 min of immersion of the mineralized samples in the irrigant (P < 0.05), and the use of chelating agents prior to CHX potentiated this adsorption. CONCLUSIONS: The irrigation solutions had a variable effect on the properties of dentine, on the adhesion of E. faecalis and C. albicans and the adsorption of CHX to the dentine surface.

Chemical profiling of PM10 from urban road dust.

Road dust resuspension is one of the main sources of particulate matter with impacts on air quality, health and climate. With the aim of characterising the thoracic fraction, a portable resuspension chamber was used to collect road dust from five main roads in Oporto and an urban tunnel in Braga, north of Portugal. The PM10 samples were analysed for: i) carbonates by acidification and quantification of the evolved CO2, ii) carbonaceous content (OC and EC) by a thermo-optical technique, iii) elemental composition by ICP-MS and ICP-AES after acid digestion, and iv) organic speciation by GC-MS. Dust loadings of 0.48±0.39mgPM10m-2 were obtained for asphalt paved roads. A much higher mean value was achieved in a cobbled pavement (50mgPM10m-2). In general, carbonates were not detected in PM10. OC and EC accounted for PM10 mass fractions up to 11% and 5%, respectively. Metal oxides accounted for 29±7.5% of the PM10 mass from the asphalt paved roads and 73% in samples from the cobbled street. Crustal and anthropogenic elements, associated with tyre and brake wear, dominated the inorganic fraction. PM10 comprised hundreds of organic constituents, including hopanoids, n-alkanes and other aliphatics, polycyclic aromatic hydrocarbons (PAH), alcohols, sterols, various types of acids, glycerol derivatives, lactones, sugars and derivatives, phenolic compounds and plasticizers. In samples from the cobbled street, these organic classes represented only 439µgg-1PM10, while for other pavements mass fractions up to 65mgg-1PM10 were obtained. Except for the cobbled street, on average, about 40% of the analysed organic fraction was composed of plasticizers. Although the risk via inhalation of PAH was found to be insignificant, the PM10 from some roads can contribute to an estimated excess of 332 to 2183 per million new cancer cases in adults exposed via ingestion and dermal contact.

Antibacterial properties of silver nanoparticles as a root canal irrigant against Enterococcus faecalis biofilm and infected dentinal tubules.

AIM: To evaluate the antimicrobial action of an irrigant containing silver nanoparticles in an aqueous vehicle (AgNp), sodium hypochlorite and chlorhexidine against Enterococcus faecalis biofilm and infected dentinal tubules. METHODOLOGY: Bovine dentine blocks were used for E. faecalis biofilm development for 21 days and irrigated with 94 ppm AgNp solution, 2.5% NaOCl and 2% chlorhexidine for 5, 15 and 30 min. For infection of dentinal tubules with E. faecalis, dentine specimens from bovine incisors were submitted to a contamination protocol over 5 days, with eight centrifugation cycles on every alternate day, and irrigated with the same solutions and time intervals used for the biofilm. The specimens were stained with the Live/Dead technique and evaluated using a confocal laser scanning microscope (CLSM). The bioImage_L software was used for measurement of the total biovolume of biofilm in µm3 and percentage of viable bacteria (green cells) in biofilm and in dentinal tubules found after the irrigation. Statistical analyses were performed using Kruskal-Wallis and Dunn's tests for quantification of viable cells in biofilm, the Friedman test for comparisons of viable bacteria in dentinal tubules in different areas of the root canal and the Mann-Whitney U-test to compare the action of the irrigants between the two methods (P < 0.05). RESULTS: The AgNp solution eliminated fewer bacteria, but was able to dissolve more biofilm compared with chlorhexidine (P < 0.05). NaOCl had the greatest antimicrobial activity and biofilm dissolution capacity. AgNp solution had less antimicrobial action in infected dentinal tubules compared with NaOCl (P < 0.05). The AgNp solution after 5 min was more effective in eliminating planktonic bacteria in dentinal tubules than in biofilm, but at 30 min fewer viable bacteria were observed in the biofilm compared with intratubular dentine (P < 0.05). CONCLUSIONS: AgNp irrigant was not as effective against E. faecalis compared to solutions commonly used in root canal treatment. NaOCl is appropriate as an irrigant because it was effective in disrupting biofilm and in eliminating bacteria in biofilms and in dentinal tubules.

Evaluation of apical transportation and centring ability of five thermally treated NiTi rotary systems.

AIM: To evaluate apical transportation and centring ability during root canal preparation in mesial root canals of mandibular molars associated with ProTaper Gold (PTG), ProDesign S (PDS), Hyflex CM (HCM), Hyflex EDM and ProDesign Logic (PDL). METHODOLOGY: Sixty mandibular first molars with two separate canals in the mesial root were selected after root anatomy pairing by microcomputed tomography (microCT). The teeth were randomly divided into five groups (n = 24); the root canal volume was calculated to ensure sample homogeneity. All the root canals were prepared up to size 25 in accordance with the instructions of each rotary system manufacturer. After root canal preparation, the teeth were scanned by microCT to analyse apical transportation, root canal centralization and the pre- and post-preparation root canal volume at the apical and cervical levels. Kruskal-Wallis and Dunn tests were used for comparisons amongst groups for transportation values. For volume changes, the parametric ANOVA and Tukey's tests were used RESULTS: There were no significant differences in apical transportation amongst the rotary systems (P > 0.05). All the systems created apical transportation; values ranging from 0.031 mm (PDL) to 0.072 mm (PTG), and enlargements between 39% (HCM) and 91.1% (PDS) were observed. In relative to cervical transportation, significant differences were observed amongst the systems (P < 0.05). Mean transportation values between 0.07 mm (HCM) and 0.172 mm (PTG) were found, with enlargements between 35.4% (HCM) and 51.5% (PDS). CONCLUSION: All the thermally treated systems resulted in similar apical transportation. In the cervical region, the Hyflex CM and Prodesign Logic systems were associated with more centred preparations.

Torsional fatigue resistance of pathfinding instruments manufactured from several nickel-titanium alloys.

AIM: To evaluate the torsional properties of pathfinding nickel-titanium (NiTi) rotary instruments manufactured from several NiTi alloys, ProGlider (M-wire), Hyflex GPF (conventional NiTi Wire and controlled memory wire), Logic (conventional NiTi wire and controlled memory wire) and Mtwo (conventional NiTi wire). METHODOLOGY: A total of 56 NiTi instruments from Glidepath rotary systems (n = 8) were used: Logic (size 25, .01 taper), Logic CM (size 25, .01 taper), ProGlider (size 16, .02 taper), Hyflex GPF (size 15, .01 taper), Hyflex GPF CM (size 15, .02 taper; size 20, .02 taper) and Mtwo (size 10, .04 taper). The torsion tests were performed based on ISO 3630-1 (1992). Three millimetres of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. Data were analysed using a one-way analysis of variance (anova) and Tukey test with a significance level at a = 5%. RESULTS: The Logic size 25, .01 taper had significantly higher torsional strength values (P < 0.05). The ProGlider was significantly different when compared with Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). The Logic CM size 25, .01 taper had significantly higher torsional strength than Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). No difference was found amongst Mtwo size 10, .04 taper and Hyflex GPF groups (size 15, .01 taper; size 15, .02 taper; size 20, .02 taper). In relation to the angle of rotation, Logic CM size 25, .01 taper and Hyflex GPF size 15, .01 taper had the highest angle values (P < 0.05). The ProGlider had the lowest angle values in comparison with all the groups (P < 0.05) followed by Mtwo size 10, .04 taper. The Logic size 25, .01 taper had significantly higher angle of rotation values than ProGlider and Mtwo size 10, .04 taper (P < 0.05). CONCLUSION: The Logic size 25, .01 taper instrument made of conventional NiTi alloy had the highest torsional strength of all instruments tested. In addition, the ProGlider instrument manufactured from M-Wire alloy had the lowest angle of rotation to fracture in comparison with the other instruments.

Analysis of the effects of several decalcifying agents alone and in combination with sodium hypochlorite on the chemical composition of dentine.

AIM: To investigate the effects of several decalcifying agents alone and in combination with sodium hypochlorite (NaOCl) on the organic and inorganic components of dentine using attenuated total reflectance in Fourier transform infrared spectroscopy (ATR-FTIR). METHODOLOGY: Dentine slices from bovine teeth were submitted to (n = 5) the following: 0.9% saline, 9% and 18% etidronic acid (HEDP), 5% and 10% tetrasodium EDTA (EDTANa4 ), 17% trisodium EDTA (EDTAHNa3 ), and 0.5% and 2.0% peracetic acid (PAA) for 0.5-10 min; and to the combinations: G1 - mixture 5% NaOCl + 18% HEDP (5 and 10 min); G2 - mixture 5% NaOCl + 10% EDTANa4 (5 and 10 min); G2 - 2.5% NaOCl (5 min) + 17% EDTAHNa3 (1 min); G3 - 2.5% NaOCl (5 min) + 0.5% PAA (1 min); G4 - 2.5% NaOCl (5 min) + 9% HEDP (5 min). Specimens of G2, G3 and G4 received final flushes with 2.5% NaOCl for 0.5-10 min. Amide III/phosphate and carbonate/phosphate ratios of the spectra collected from the dentine specimens before and after immersion in the solutions were determined. Data were submitted to one-way repeated measures and one-way anova. RESULTS: For the same decalcifying agent, the higher the concentration and immersion time the greater the removal of phosphate, exposure of collagen matrix and consequently the increases in amide III/phosphate ratio. However, significant differences were found only between the two concentrations of PAA (P < 0.05). PAA caused greater increases in this ratio, followed by EDTAHNa3 , EDTANa4 and HEDP, and this order was retained in the combinations with NaOCl. This ratio was significantly reduced in G1 (P < 0.05) and not altered in G2 (P > 0.05). Due to collagen degradation, the amide III/phosphate ratio reduced significantly after the use of NaOCl in G3, G4 and G5 (P < 0.05). NaOCl required approximately 0.5 s to deproteinate the collagen matrix exposed after phosphate removal by EDTAHNa3 and PAA. The carbonate of dentine was removed more rapidly than phosphate by all decalcifying agents alone and in G3, G4 and G5. In the combinations with NaOCl, the last irrigant used defined the dentine amide III/phosphate and carbonate/phosphate ratios. CONCLUSIONS: HEDP and EDTANa4 caused minor whilst EDTAHNa3 and PAA caused greater demineralization of dentine; both effects were time and concentration dependent. NaOCl degraded the dentine organic matrix more rapidly when it was exposed. Combinations of NaOCl and decalcifying agents can be used to create dentine surfaces with varying compositions for interaction with endodontic sealers.

The effect of mixing method on tricalcium silicate-based cement.

AIM: To evaluate the effect of three methods of mixing on the physical and chemical properties of tricalcium silicate-based cements. METHODOLOGY: The materials evaluated were MTA Angelus and Portland cement with 20% zirconium oxide (PC-20-Zr). The cements were mixed using a 3 : 1 powder-to-liquid ratio. The mixing methods were manual (m), trituration (tr) and ultrasonic (us) activation. The materials were characterized by means of scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy. Flowability was analysed according to ANSI/ADA 57/2012. Initial and final setting times were assessed following ASTM C266/08. Volume change was evaluated using a micro-CT volumetric method. Solubility was analysed according to ADA 57/2012. pH and calcium ion release were measured after 3, 24, 72 and 168 h. Statistical analysis was performed using two-way analysis of variance. The level of significance was set at P = 0.05. RESULTS: The SEM analysis revealed that ultrasonic activation was associated with a homogeneous distribution of particles. Flowability, volume change and initial setting time were not influenced by the mixing method (P > 0.05). Solubility was influenced by the mixing method (P < 0.05). For pH, at 168 h, significant differences were found between MTA-m and PC-20-Zr-m (P < 0.05). For calcium ion release, PC-20-Zr-tr had higher values than MTA-m at 3 h, and MTA-tr had higher values than PC-20-Zr-m at 168 h (P < 0.05). CONCLUSIONS: The ultrasonic and trituration methods led to higher calcium ion release and pH compared with manual mixing for all cements, whilst the ultrasonic method produced smaller particles for the PC-20-Zr cement. Flow, setting times and volume change were not influenced by the mixing method used; however, it did have an impact on solubility.

Comparative accuracy of the Clearing Technique, CBCT and Micro-CT methods in studying the mesial root canal configuration of mandibular first molars.

AIMS: To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard. METHODOLOGY: Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 µm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 µm and 150 µm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%. RESULTS: Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05). CONCLUSION: Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.

Mixture of alkaline tetrasodium EDTA with sodium hypochlorite promotes in vitro smear layer removal and organic matter dissolution during biomechanical preparation.

AIM: The aim of this study was to determine the following: (i) the quantity of free chlorine in mixtures of equal proportions of sodium hypochlorite (NaOCl) with trisodium ethylenediaminetetraacetic acid (EDTAHNa3 ) and alkaline tetrasodium ethylenediaminetetraacetic acid (EDTANa4 ); (ii) organic matter dissolution; and (iii) the time necessary to remove the smear layer by these irrigants alone and when mixed. METHODOLOGY: The solutions were mixed in a 1 : 1 ratio and then iodometrically titrated over time to determine the quantity of free available chlorine. The capability of organic matter dissolution by the solutions alone and the mixtures of irrigants was analysed by weighing bovine muscle tissue specimens before and after submission to the following groups (n = 10): G1 - 0.9% saline solution (control), G2 - 2.5% NaOCl, G3 - 17% EDTAHNa3 , G4 - 10% EDTANa4 , G5 - 20% EDTANa4 , G6 - 5% NaOCl + 17% EDTAHNa3 , G7 - 5% NaOCl + 10% EDTANa4 and G8 - 5% NaOCl + 20% EDTANa4 . The times necessary for smear layer removal were determinated on discs of bovine dentine with a standardized smear layer produced with SiC papers using a scanning electron microscope that did not require the samples to be sputter coated. The dentine discs were submitted to the same experimental groups previously described (n = 10) over several time periods, and the photomicrographs acquired were scored for the presence of smear layer. The parametric data of tissue dissolution were analysed using two-way anova and one-way anova with Tukey's post hoc tests (α < 0.05), whilst nonparametric data of smear layer removal were analysed by Friedman test (α < 0.05) and the Kruskal-Wallis test with Dunn's post hoc (α < 0.05). RESULTS: EDTAHNa3 caused an almost complete and immediate loss of free available chlorine from NaOCl, whilst EDTANa4 promoted a slow and concentrat-ion-dependent decline. The organic matter was not dissolved in the control group, EDTA groups or the mixture of NaOCl + 17% EDTAHNa3 group (P > 0.05). NaOCl alone and the associations of NaOCl + EDTANa4 dissolved tissue at all periods analysed (P < 0.05). The smear layer was not removed in the control and NaOCl groups (P > 0.05). The smear layer was removed at 1 min in the NaOCl + 17% EDTAHNa3 group (P < 0.05); 2 min in 17% EDTAHNa3 group (P < 0.05); and 5 min in 10% EDTANa4 , 20% EDTANa4 , 5% NaOCl + 10% EDTANa4 and 5% NaOCl + 20% EDTANa4 groups (P < 0.05). CONCLUSIONS: Alkaline EDTANa4 was slower in removing the smear layer than EDTAHNa3 , but when mixed with NaOCl during biomechanical canal preparation promoted organic matter dissolution and smear layer removal simultaneously. However, the mixing of NaOCl and EDTANa4 should be performed immediately before use to prevent the reduction of free available chlorine.