Long-term monitoring of stimulated lower leg skeletal muscle forces compared with voluntary contractions in myopathy patients - A five-year follow-up report on 5 adults.

OBJECTIVE: Long-term assessments of lower leg muscle forces in ambulant patients with distal myopathies. METHODS AND MATERIALS: Over a five-year period, we measured involuntary, nerve-stimulated, isometric torques of the ankle dorsiflexors in a group of ambulant patients with myopathies and compared results with voluntary Manual Muscle Tests (MMT). RESULTS: From ten recruited patients, five could finish the five-year protocol. Twenty-seven force measurements sessions (one per year; 1,5 hours duration each) were performed. These patients exhibited low, stable torques or increased minimally (0.2 Newtonmeter, versus 0.1 Nm, ns; 0.7 vs. 1.0, ns; 3.4 vs. 3.5, ns; 0.2 vs. 0.1, ns; 0.8 vs. 1.5, P 0.0004 initial values vs. 5-year values, [norm: 3.9-5.7 Nm]). A 6th patient, eliciting low torque values (0.1 Nm) early passed away. Contraction times inversely correlated with MMT. MMT provided similar overall force abilities. CONCLUSIONS: Long-term monitoring of lower leg muscle forces in ambulant patients is limited by the patient's health status. In a small group of patients, stimulated lower leg forces did not worsen over many years relative to their diagnosed myopathies. Tracking involuntary forces, could be a useful monitoring providing phenotypic information, in addition to MMT. Future devices should be small and be simply self-applying, designed for subjects' domestic use and web-based data transfer. CLINICALTRIALS: gov NCT00735384.

Face anthropometry for filtering facepiece respirators: analysis of the association between facial dimensions and respirator fit.

OBJECTIVE: Ensuring proper respirator fit for individuals remains a persistent challenge in occupational environments, yet there is limited knowledge about how respirators interact with the face to "'fit." Previous studies have attempted to understand the association between face dimensions and respirator fit using traditional head/face anthropometry not specifically tailored for respirators. The purpose of this study was to assess and compare the ability of filtering facepiece respirator (FFR)-specific face anthropometry with traditional head/face anthropometry in exploring the relationship between facial dimensions and the fit of FFR. METHODS: The study utilized 3D face scans and quantitative fit factor scores from 56 participants to investigate the relationship between face anthropometry and FFR fit. Both FFR-specific and traditional anthropometric measurements were obtained through 3D anthropometric software. Intra-correlation of anthropometry was analyzed to evaluate the efficiency and effectiveness of FFR-specific and traditional anthropometry respectively. Principal component analysis (PCA) was conducted to test the usefulness of the PCA method for investigating various facial features. Logistic regression was used to develop fit association models by estimating the relationship between each face measurement set and the binary outcome of the fit test result. The prediction accuracy of the developed regression models was tested. RESULTS: FFR-specific face anthropometry consists of a set of measurements that can inform the detailed facial shape associated with the FFRs more effectively than traditional head/face anthropometry. While PCA may have been effective in reducing the variable dimensions for the relatively large parts of the human body such as upper and lower bodies in previous literature, PCA results of FFR-specific and traditional anthropometry were inconsistent and insufficient to describe face dimensions with complex anatomy in a small-detailed area, suggesting that facial shape should be understood through a variety of approaches including statistical methods. Logistic regression analysis results confirmed that the association models of FFR-specific face anthropometry were significant with higher prediction accuracy and had a better model's goodness of fit than those of traditional head/face anthropometry in 3 conditions inputting all measurements, all PC scores, or top 5 measurements from PCA. CONCLUSIONS: The findings showed that the FFR fit association model enables an understanding of the detailed association between face and respirator fit and allows for the development of a system to predict respirator fit success or failure based on facial dimensions. Future research would include testing the validity of the model and FFR-specific measurement set on different respirator types, expanding the population set, and developing an integrated approach using automated and machine learning technologies to inform FFR selection for occupation workers and the general population.

Cardiac patient-specific three-dimensional models as surgical planning tools.

BACKGROUND: Three-dimensional printing is an additive manufacturing method that builds objects from digitally generated computational models. Core technologies behind three-dimensional printing are evolving rapidly with major advances in materials, resolution, and speed that enable greater realism and higher accuracy. These improvements have led to novel applications of these processes in the medical field. METHODS: The process of going from a medical image data set (computed tomography, magnetic resonance imaging, ultrasound) to a physical three-dimensional print includes several steps that are described. Medical images originate from Digital Imaging and Communications in Medicine files or data sets, the current standard for storing and transmitting medical images. Via Digital Imaging and Communications in Medicine manipulation software packages, a segmentation process, and manual intervention by an expert user, three-dimensional digital and printed models can be constructed in great detail. RESULTS: Cardiovascular medicine is one of the fastest growing applications for medical three-dimensional printing. The technology is more frequently being used for patient and clinician education, preprocedural planning, and medical device design and prototyping. We report on three case studies, describing how our three-dimensional printing has contributed to the care of cardiac patients at the University of Minnesota. CONCLUSION: Medical applications of computational three-dimensional modeling and printing are already extensive and growing rapidly and are routinely used for visualizing complex anatomies from patient imaging files to plan surgeries and create surgical simulators. Studies are needed to determine whether three-dimensional printed models are cost effective and can consistently improve clinical outcomes before they become part of routine clinical practice.

Home-based transcranial direct current stimulation plus tracking training therapy in people with stroke: an open-label feasibility study.

BACKGROUND: Transcranial direct current stimulation (tDCS) is an effective neuromodulation adjunct to repetitive motor training in promoting motor recovery post-stroke. Finger tracking training is motor training whereby people with stroke use the impaired index finger to trace waveform-shaped lines on a monitor. Our aims were to assess the feasibility and safety of a telerehabilitation program consisting of tDCS and finger tracking training through questionnaires on ease of use, adverse symptoms, and quantitative assessments of motor function and cognition. We believe this telerehabilitation program will be safe and feasible, and may reduce patient and clinic costs. METHODS: Six participants with hemiplegia post-stroke [mean (SD) age was 61 (10) years; 3 women; mean (SD) time post-stroke was 5.5 (6.5) years] received five 20-min tDCS sessions and finger tracking training provided through telecommunication. Safety measurements included the Digit Span Forward Test for memory, a survey of symptoms, and the Box and Block test for motor function. We assessed feasibility by adherence to treatment and by a questionnaire on ease of equipment use. We reported descriptive statistics on all outcome measures. RESULTS: Participants completed all treatment sessions with no adverse events. Also, 83.33% of participants found the set-up easy, and all were comfortable with the devices. There was 100% adherence to the sessions and all recommended telerehabilitation. CONCLUSIONS: tDCS with finger tracking training delivered through telerehabilitation was safe, feasible, and has the potential to be a cost-effective home-based therapy for post-stroke motor rehabilitation. TRIAL REGISTRATION: NCT02460809 (ClinicalTrials.gov).

Isometric skeletal muscle force measurement in primary myopathies.

INTRODUCTION: In myopathy patients, it is useful to measure skeletal muscle forces. Conventional methods require voluntary muscle activation, which can be unreliable. We evaluated a device for nonvoluntary force assessment. METHODS: We tested 8 patients (unknown myopathy n = 2, inflammatory myopathy, facioscapulohumeral muscular dystrophy, mitochondrial myopathy, dysferlinopathy, multi-minicore disease, Becker-Kiener muscular dystrophy, n = 1 each). Isometric twitch torques of ankle dorsiflexors were measured after fibular nerve stimulation. RESULTS: Six patients had decreased torques vs. 8 controls (men: median Newton-meter 1.6 vs. 5.7, women: 0.2 vs. 3.9, both P < 0.0001). Values correlated with Manual Muscle Test results (r = 0.73; r(2) = 0.53; P < 0.0001). In weak dorsiflexors, torque could be measured despite lower signal-to-noise ratios. In 2 patients with hypertrophy, we measured increased torques. CONCLUSIONS: Nonvoluntary muscle force assessment can be used in patients with myopathies, and values correlate with voluntary forces determined by traditional methods. Muscle Nerve 53: 913-917, 2016.

Ipsilesional motor-evoked potential absence in pediatric hemiparesis impacts tracking accuracy of the less affected hand.

This study analyzed the relationship between electrophysiological responses to transcranial magnetic stimulation (TMS), finger tracking accuracy, and volume of neural substrate in children with congenital hemiparesis. Nineteen participants demonstrating an ipsilesional motor-evoked potential (MEP) were compared with eleven participants showing an absent ipsilesional MEP response. Comparisons of finger tracking accuracy from the affected and less affected hands and ipsilesional/contralesional (I/C) volume ratio for the primary motor cortex (M1) and posterior limb of internal capsule (PLIC) were done using two-sample t-tests. Participants showing an ipsilesional MEP response demonstrated superior tracking performance from the less affected hand (p=0.016) and significantly higher I/C volume ratios for M1 (p=0.028) and PLIC (p=0.005) compared to participants without an ipsilesional MEP response. Group differences in finger tracking accuracy from the affected hand were not significant. These results highlight differentiating factors amongst children with congenital hemiparesis showing contrasting MEP responses: less affected hand performance and preserved M1 and PLIC volume. Along with MEP status, these factors pose important clinical implications in pediatric stroke rehabilitation. These findings may also reflect competitive developmental processes associated with the preservation of affected hand function at the expense of some function in the less affected hand.

Inter-electrode tissue resistance is not affected by tissue oedema when electrically stimulating the lower limb of sepsis patients.

ICU patients typically are given large amounts of fluid and often develop oedema. The purpose of this study was to evaluate whether the oedema would change inter-electrode resistance and, thus, require a different approach to using non-invasive electrical stimulation of nerves to assess muscle force. Inter-electrode tissue resistance in the lower leg was measured by applying a 300 µs constant current pulse and measuring the current through and voltage across the stimulating electrodes. The protocol was administered to nine ICU patients with oedema, eight surgical patients without oedema and eight healthy controls. No significant difference in inter-electrode resistance was found between the three groups. For all groups, resistance decreased as stimulation current increased. In conclusion, inter-electrode resistance in ICU patients with severe oedema is the same as the resistance in regular surgical patients and healthy controls. This means that non-invasive nerve stimulation devices do not need to be designed to accommodate different resistances when used with oedema patients; however, surface stimulation does require higher current levels with oedema patients because of the increased distance between the skin surface and the targeted nerve or muscle.

Design of a portable hydraulic ankle-foot orthosis.

Small-scale hydraulics is ideal for powered human assistive devices including powered ankle foot orthoses because a large torque can be generated with an actuator that is small and light. A portable hydraulic ankle foot orthosis has been designed and is undergoing preliminary prototyping and engineering bench test evaluation. The device provides 90 Nm of ankle torque and has an operating pressure of 138 bar (2,000 psi). The battery-operated hydraulic power supply weighs about 3 kg and is worn at the waist. The ankle component weighs about 1.2 Kg and connects to the power supply with two hoses. Performance simulation and preliminary bench testing suggests that the device could be useful in certain rehabilitation applications.

Preliminary design of an energy storing orthosis for providing gait to people with spinal cord injury.

A new design is proposed for an energy storing orthosis (ESO) that restores walking to people with spinal cord injury by combining functional electrical stimulation of the quadriceps muscle with a mechanical brace that uses elastic elements to store and transfer energy between hip and knee joints. The new ESO is a variation of a previous design and uses constant force springs for energy storage. Based on the detailed design and on dynamic simulations, the concept has demonstrated preliminary technical feasibility.

Combined statistical analysis method assessing fast versus slow movement training in a patient with cerebellar stroke: a single-case study.

BACKGROUND: Gold standards of data analysis for single-case research do not currently exist. OBJECTIVE: The purpose of this study was to determine whether a combined statistical analysis method is more effective in assessing movement training effects in a patient with cerebellar stroke. DESIGN: A crossover single-case research design was conducted. METHODS: The patient was a 69-year-old man with a chronic cerebellar infarct who received two 5-week phases of finger tracking training at different movement rates. Changes were measured with the Box and Block Test, the Jebsen-Taylor test, the finger extension force test, and the corticospinal excitability test. Both visual analysis and statistical tests (including split-middle line method, t test, confidence interval, and effect size) were used to assess potential intervention effects. RESULTS: The results of the t tests were highly consistent with the confidence interval tests, but less consistent with the split-middle line method. Most results produced medium to large effect sizes. LIMITATIONS: The possibility of an incomplete washout effect was a confounding factor in the current analyses. CONCLUSIONS: The combined statistical analysis method may assist researchers in assessing intervention effects in single-case stroke rehabilitation studies.