Understanding the Complexation of Alkyl-Substituted Nitrilotriacetamides with Uranium: A Study by Absorption Spectroscopy and Microcalorimetry.

Complexation thermodynamics of UO22+ ions with a series of alkyl-substituted nitrilotriacetamides (NTA) was investigated by absorption spectroscopy and microcalorimetry. The hexamethyl derivative of NTA (HMNTA) forms the weakest two successive complexes with UO22+ ions with stability constants of log ß11 = 3.5 ± 0.1 and log ß12 = 6.1 ± 0.1. The formation constant values increased linearly with increasing alkyl chain length of the substituents from hexamethyl NTA to hexabutyl NTA (HBNTA) and to hexahexyl NTA (HHNTA). The complexation with each ligand was both enthalpy and entropy driven with exothermic enthalpy changes of ΔH11 = -14.7 ± 1.0 kJ/mol, ΔH12 = -10.2 ± 0.8 kJ/mol for HMNTA, ΔH11 = -19.2 ± 1.2 kJ/mol, ΔH12 = -16.4 ± 1.1 kJ/mol for HBNTA, and ΔH11 = -21.3 ± 1.4 kJ/mol, ΔH12 = -19.4 ± 2.3 kJ/mol for HHNTA. Similarly, the positive entropy changes with each ligand were ΔS11 = 18.1 ± 2.7 J/mol/K, ΔS12 = 82.9 ± 3.8 J/mol/K for HMNTA, ΔS11 = 14.4 ± 1.2 J/mol/K, ΔS12 = 87.2 ± 4.2 J/mol/K for HBNTA, and ΔS11 = 16.1 ± 2.4 J/mol/K, ΔS12 = 92.6 ± 3.1 J/mol/K for HHNTA. Structural features of the complex suggest the participation of two ligands coordinating in a bidentate mode via the carbonyl oxygens. The [UO2L2]2+ complexes appear to be noncentrosymmetric with two ligands and one water molecule occupying the equatorial plane of the dioxo uranyl cation. The structure of the complex was confirmed by 1H NMR titration, EXAFS measurements, and DFT calculations.

Remarkable Improvement in Am3+ and Cm3+ Separation Using a Cooperative Counter Selectivity Strategy by a Combination of Branched Diglycolamides and Hydrophilic Polyaza-heterocycles.

Separation of Am3+ and Cm3+ is one of the most challenging problems in the back-end of the nuclear fuel cycle. In the present work, we exploited the cooperative effect of the opposite selectivity of hydrophobic branched DGA derivatives and hydrophobic N-donor heterocyclic ligands taken in two different phases to achieve improved separation behavior. A systematic study was performed using a series of DGA derivatives to understand the effect and the position of branching in the alkyl chains on the separation behavior of Am3+ and Cm3+. A separation factor (S.F.) value as high as 10 for Cm3+ over Am3+ was obtained in the case of TiBDGA (N,N,N',N'-tetra-iso-butyl diglycolamide) using SO3PhBTPhen ((phenanthroline-2,9-diyl)-1,2,4-triazine-5,5,6,6-tetrayltetrabenzenesulfonic acid) as the aqueous complexant, which is the highest reported value so far for the ligand-based separation of Am3+ and Cm3+ without involving any oxidation or reduction step. The high selectivity favoring Cm3+ ion extraction in the case of this DGA derivative is also explained with the help of computational studies.

Understanding the Interaction of Uranyl Cation with Two C-Pivot Tripodal Amides: Synthesis, Complexation, Microcalorimetry, and DFT Studies.

Complexation of uranyl ions with two structurally related C-pivotal tripodal amides with varying spacer lengths, synthesized for the first time, was studied by optical spectroscopy. In the tripodal amides, the coordination was through the carbonyl O atoms where the carbonyl groups were away from the central C-atom by three spacer atoms (LI) and four spacer atoms (LII), respectively. Increasing the spacer atoms going from LI to LII favors the complexation with the linear uranyl cations and results in stronger complex formation. The complexation heat between the uranyl cations and the two amide ligands was directly measured by microcalorimetric titrations. The complexation with both the ligands was driven by exothermic enthalpy and positive entropy changes. Formation of the complex proceeded by the replacement of water molecules from the primary coordination sphere of the uranyl cation. Both ligands formed bisolvated (ML2-type) complexes in which one unit of the ligand binds in a monodentate manner and the other in a bidentate mode. Density functional theory calculations further supported our experimental observations.

Efficient actinide sequestration with ionic liquid-based extraction chromatography resins containing Aza-crown ether functionalized diglycolamides.

Two new extraction chromatographic resins (ECRs) were prepared by impregnating two exotic diglycolamide (DGA) ligands (having three or four DGA moieties tethered to aza-crown ether scaffolds) dissolved in an ionic liquid onto an inert solid support. A room temperature ionic liquid (RTIL) was used for enhancing the performance of the ECRs. The ECR containing triaza-9-crown-3 functionalized with three DGA moieties (TAM-3-DGA), and tetraaza-12-crown-4 tethered with four DGA arms (TAM-4-DGA) were evaluated for the separation of Am3+ and Pu4+from nitric acid solutions. The resin capacity for Eu3+ was 9.52 mg/g and 7.24 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. Similarly, the resin capacity for Pu4+was 7.44 mg/g and 5.72 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. These maximum loading values corresponded to the formation of a 1:1 metal/ligand complex for the Eu3+ ion and a 1:2 metal/ligand complex for the Pu4+ ion. The sorption of Eu3+and Pu4+on the resins followed a chemisorption phenomenon on both resins. The sorbed Eu3+and Pu4+ions from the resin phase could be efficiently desorbed with complexing ligands such as guanidine carbonate/HEDTA and oxalic acid, respectively.

Aggregation Behavior of Nitrilotriacetamide (NTAmide) Ligands in Thorium(IV) Extraction from Acidic Medium: Small-Angle Neutron Scattering, Fourier Transform Infrared, and Theoretical Studies.

Two tripodal amides obtained from nitrilotriacetic acid with n-butyl and n-octyl alkyl chains (HBNTA(LI) and HONTA(LII), respectively) were studied for the extraction of Th(IV) ions from nitric acid medium. The effect of the diluent medium, i.e., n-dodecane alone and a mixture of n-dodecane and 1-decanol, onto aggregate formation were investigated using small angle neutron scattering (SANS) studies. In addition, the influence of the ligand structure, nitric acid, and Th(IV) loading onto ligand aggregation and third-phase formation tendency was discussed.The LI/LII exist as monomers (aggregarte radius for LI: 6.0 Å; LII:7.4 Å) in the presence of 1-decanol, whereas LII forms dimers (aggregarte radius for LII:9.3 Å; LI does not dissolve in n-dodecane) in the absence of 1-decanol. The aggregation number increases for both the ligands after HNO3 and Th(IV) loading. The maximum organic concentration (0.050 ± 0.004 M) of Th(IV) was reached without third-phase formation for 0.1 M LI/LII dissolved in 20% isodecanol +80% n-dodecane. The interaction of 1-decanol with LII and HNO3/Th(IV) with amidic oxygens of LI/LII results in shift of carbonyl stretching frequency, as shown by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) studies. The structural and bonding information of the Th-LI/LII complex were derived from the density functional theoretical (DFT) studies. The molecular dynamics (MD) simulations suggested that the aggregation behavior of the ligand in the present system is governed by the population of hydrogen bonds by phase modifier around the ligand molecules. Although the theoretical studies suggested higher Gibbs free energy of complexation for Th4+ ions with LI than LII, the extraction was found to be higher with the latter, possibly due to the higher lipophilicity and solubility of the Th-LII aggregate in the nonpolar media.

Gamma radiolytic stability of the novel modified diglycolamide 2,2'-oxybis(N,N-didecylpropanamide) (mTDDGA) for grouped actinide extraction.

Reprocessing of spent nuclear fuel aims at improving resource efficiency and reducing its radiotoxicity and heat production in the long term. The necessary separation of certain metal ions from the spent fuel solutions can be achieved using different solvent extraction processes. For the scenario of the EURO-GANEX process, the use of the new, modified diglycolamide 2,2'-oxybis(N,N-didecylpropanamide) (mTDDGA) was recently proposed to simplify the current solvent composition and reduce extraction of fission products. Before further developing the process based on this new ligand, its stability under ionizing radiation conditions needs to be studied. For this reason, gamma irradiation experiments were conducted followed by analyses with high performance liquid chromatography coupled to a mass spectrometer (HPLC-MS). The determined degradation rate of mTDDGA was found to be lower than that of the reference molecule N,N,N',N'-tetra-n-octyl-diglycolamide (TODGA). Many identified degradation compounds of both molecules are analogues showing the same bond breaking, although also unreported de-methylation, double/triple de-alkylation and n-dodecane addition products were observed.

Stability of Different BTBP and BTPhen Extracting or Masking Compounds against γ Radiation.

The radiolytic stability of hydrophobic extracting compounds CyMe4-BTBP and CyMe4-BTPhen and a hydrophilic masking agent (PhSO3H)2-BTPhen, widely employed for trivalent minor actinoid and lanthanoid separation, against γ radiation was tested. Even though the solvent with a promising fluorinated diluent BK-1 provides better extraction properties compared to octan-1-ol, its radiation stability is much lower, and no extraction was observed already after an absorbed dose of 150 kGy (CyMe4-BTBP) or 200 kGy (CyMe4-BTPhen). For the (PhSO3H)2-BTPhen hydrophilic masking agent, the results showed that the rate of radiolytic degradation was significantly higher in 0.25 M HNO3 than in 0.5 M HNO3. For both the hydrophobic and hydrophilic agents, degradation was slower in the presence of both organic and aqueous phases during irradiation.

Highly efficient plutonium scavenging by an extraction chromatography resin containing a tetraaza-12-crown-4 ligand tethered with four diglycolamide pendent arms.

An efficient extraction chromatography resin, containing tetraaza-12-crown-4 functionalized with four diglycolamide moieties, was evaluated for the separation of plutonium. This chromatography resin yielded very large distribution coefficients for Pu4+ (>105) in 0.5 - 6 M HNO3 feed solutions. Various physicochemical properties such as sorption kinetics, Pu4+ sorption mechanism, and its sorption capacity were investigated. The sorption kinetics, following a pseudo-second-order model, showed that about 10 minutes of equilibration was sufficient for >99.9% sorption of Pu4+. The sorption of Pu4+ on the resin followed the Langmuir monolayer model, which was confirmed by a theoretical calculation based on the kinetic model. The Pu4+ sorption on the resin was driven by a large exothermic enthalpy change (ΔH = -31.4±2.2 kJ/mol) and a positive entropy change (ΔS = 224±15 J/mol/L). The resin could sorb a maximum of 12.1±0.8 mg of Pu per gram of resin, which is equivalent to 1:2 metal/ligand complex on the resin. The Pu4+ from the resin phase was completely stripped with 0.5 M oxalic acid. A possible application of this resin for the separation / pre-concentration of Pu4+ was successfully demonstrated in the column mode.

Remarkable Enhancement in Extraction of Trivalent f-Block Elements Using a Macrocyclic Ligand with Four Diglycolamide Arms: Synthesis, Extraction, and Spectroscopic and Density Functional Theory Studies.

A multiple diglycolamide (DGA)-containing ligand having four DGA arms tethered to a tetraaza-12-crown-4 ring, viz. 2,2',2'',2'''-(((1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrayl)tetrakis(2-oxoethane-2,1-diyl)) tetrakis (oxy)) tetrakis(N,N-dioctylacetamide) (T12C4ODGA), was synthesized and evaluated for the extraction of different actinide and lanthanide ions, viz. Am3+, Eu3+, Pu4+, Np4+, and UO22+. The extraction efficiency of the present ligand was found to be the highest reported so far, more specifically for the trivalent metal ions Am3+ and Eu3+, when one considers the very low ligand concentration used in the present study, compared to that of the various previously reported multiple DGA-based ligands. The nature of the complexes formed during the extraction of Eu3+ was investigated using time-resolved fluorescence (TRFS) and extended X-ray absorption fine structure (EXAFS) spectroscopy. Both the solvent extraction and TRFS studies indicated the presence of 1:1 and 1:2 complexes during the extraction of Am3+ and Eu3+ having three inner-sphere water molecules in the 1:1 complex. Density functional theoretical (DFT) studies were performed on the Am3+ and Eu3+ complexes of both T12C4ODGA and an analogous compound having methyl groups in place of the n-octyl groups, and the DFT results of the T12C4ODGA nicely explain the extraction behavior of Am3+ and Eu3+.

Evaluation of two aza-crown ether-based multiple diglycolamide-containing ligands for complexation with the tetravalent actinide ions Np4+ and Pu4+: extraction and DFT studies.

Two multiple diglycolamide (DGA)-containing extractants where the DGA arms are tethered to the nitrogen atoms of two aza-crown ether scaffolds, a 9-membered aza-crown ether containing three 'N' atoms (LI) and a 12-membered aza-crown ether containing four 'N' atoms (LII), were evaluated for the extraction of the tetravalent actinide ions Np4+ and Pu4+. The tripodal ligand with three DGA arms (LI) was relatively inferior in its metal ion extraction properties as compared to the tetrapodal ligand with four DGA arms (LII) and Pu4+ ion was better extracted than Np4+ ion with both the ligands. A solvation extraction mechanism, where species of the type ML(NO3)4 are extracted, was found to be operative for both the ligands involving both the tetravalent actinide ions. While the extraction of the metal ions increased with the feed nitric acid concentration up to 4 M, a sharp decline in the extraction was seen after that. Quantitative extraction (>99%) of the actinide ions was observed with LII from 4 M HNO3, suggesting the possible application of the ligands for actinide partitioning of high-level waste. The structure and the composition of the complexes were optimized by DFT computations.

A diglycolamide-functionalized TREN-based dendrimer with a 'crab-like' grip for the complexation of actinides and lanthanides.

A generation 1 dendrimer, based on tris(2-aminoethyl)amine (TREN), containing six diglycolamide (DGA) pendent arms (termed TREN-G1-DGA) was synthesized and evaluated for the extraction of actinides and fission product ions. Solvent extraction studies indicated preferential extraction of Eu3+ over Am3+ with a separation factor value of ca. 4.5 in line with the extraction behaviour of multiple DGA ligands in previous reports. The distribution values of Am3+ and Eu3+ were about 12 and 9 times higher, respectively, than those obtained in the case of TREN-DGA using the 1 × 10-3 M ligand in 5% iso-decanol/95% n-dodecane at 3 M HNO3. The 1 : 1 (M : L) extracted species suggested 'inclusion' complex formation where more than one DGA moiety participates in the complex formation. The extracted species were devoid of any inner-sphere coordinated water molecules as confirmed by luminescence spectroscopy. The structure of the complex was also studied by DFT computations and EXAFS which suggested binding of three DGA arms around the central metal ion in the absence of any inner-sphere nitrate ions.

First Report on the Complexation of Actinides and Lanthanides Using 2,2',2''-(((1,4,7-Triazonane-1,4,7-triyl)tris(2-oxoethane-2,1-diyl)) tris(oxy)) tris( N, N-dioctylacetamide): Synthesis, Extraction, Luminescence, EXAFS, and DFT Studies.

A novel tripodal diglycolamide ligand containing a triazamacrocycle center (2,2',2''-(((1,4,7-triazonane-1,4,7-triyl)tris(2-oxoethane-2,1-diyl)) tris(oxy)) tris( N, N-dioctylacetamide), abbreviated as T9C3ODGA) was synthesized and characterized by conventional techniques. The ligand resulted in efficient extraction of actinide/lanthanide ions yielding the trend: Eu3+ > Pu4+ > Am3+ > NpO22+ > UO22+ > Sr2+ > Cs+. Similar to most of the other diglycolamide (DGA) ligands, Eu3+ was preferentially extracted as compared to Am3+; the separation factor ( DEu/ DAm) value at 3 M HNO3 was ca. 4.2. In contrast, separation from UO22+ ion was less effective as compared to that of other tripodal DGA ligands studied earlier. Solvent extraction studies indicated extraction of species of the ML2 (where L is T9C3ODGA) stoichiometry. The formation of an inclusion complex with no inner-sphere water molecule was confirmed from luminescence spectral studies. DFT computations predicted the presence of an inner-sphere nitrate ion in the most preferred complex, which was also supplemented by EXAFS and luminescence studies. The selectivity of T9C3ODGA could be explained on the basis of its more favorable interactions with Eu3+ as compared to those with Am3+ both in the gas and the solution phases.

Separation of Am3+ and Eu3+ using hexa-n-octylnitrilo triacetamide (HONTA): complexation, extraction, luminescence, EXAFS and DFT studies.

This paper reports the solvent extraction of Am3+ and Eu3+ using N,N,N',N',N'',N''-hexa-n-octylnitrilotriacetamide (HONTA) as the extractant in n-dodecane. The results are in variance with those reported previously with respect to the nature of the extracted species. The solvent extraction data were entirely different from those reported previously as the extracted species conformed to 1 : 2 (M : L) species for both Am3+ and Eu3+ ions. The structure of the extracted complex was determined by EXAFS demonstrating the three amidic 'O' atoms of the HONTA complex with the Eu3+ ion. In the case of the Am3+ ion, the pivotal 'N' atom is suggested to bond to the metal ion, which may explain the significantly more favourable extraction of Am3+vis-à-vis Eu3+. The absence of H2O molecules in the inner coordination sphere of the Eu3+-HONTA extract was confirmed by luminescence spectroscopic measurements. Complexation studies in MeOH and EtOH indicated the formation of both 1 : 1 and 1 : 2 complexes with Nd3+ ions. The results are explained on the basis of DFT calculations using HMNTA, the corresponding hexamethyl analogue of HONTA.

Gamma-radiolytic stability of new methylated TODGA derivatives for minor actinide recycling.

The stability against gamma radiation of MeTODGA (methyl tetraoctyldiglycolamide) and Me2TODGA (dimethyl tetraoctyldiglycolamide), derivatives from the well-known extractant TODGA (N,N,N',N'-tetraoctyldiglycolamide), were studied and compared. Solutions of MeTODGA and Me2TODGA in alkane diluents were subjected to (60)Co γ-irradiation in the presence and absence of nitric acid and analyzed using LC-MS to determine their rates of radiolytic concentration decrease, as well as to identify radiolysis products. The results of product identification from three different laboratories are compared and found to be in good agreement. The diglycolamide (DGA) concentrations decreased exponentially with increasing absorbed dose. The MeTODGA degradation rate constants (dose constants) were uninfluenced by the presence of nitric acid, but the acid increased the rate of degradation for Me2TODGA. The degradation products formed by irradiation are also initially produced in greater amounts in acid-contacted solution, but products may also be degraded by continued radiolysis. The identified radiolysis products suggest that the weakest bonds are those in the diglycolamide center of these molecules.

Metal-Organic Frameworks (MOFs) as Multivalent Materials: Size Control and Surface Functionalization by Monovalent Capping Ligands.

Control over particle size and composition are pivotal to tune the properties of metal organic frameworks (MOFs), for example, for biomedical applications. Particle-size control and functionalization of MIL-88A were achieved by using stoichiometric replacement of a small fraction of the divalent fumarate by monovalent capping ligands. A fluorine-capping ligand was used to quantify the surface coverage of capping ligand at the surface of MIL-88A. Size control at the nanoscale was achieved by using a monovalent carboxylic acid-functionalized poly(ethylene glycol) (PEG-COOH) ligand at different concentrations. Finally, a biotin-carboxylic acid capping ligand was used to functionalize MIL-88A to bind fluorescently labeled streptavidin as an example towards bioapplications.

Gallium-containing polymer brush film as efficient supported Lewis acid catalyst in a glass microreactor.

Polystyrene sulfonate polymer brushes, grown on the interior of the microchannels in a microreactor, have been used for the anchoring of gallium as a Lewis acid catalyst. Initially, gallium-containing polymer brushes were grown on a flat silicon oxide surface and were characterized by FTIR, ellipsometry, and X-ray photoelectron spectroscopy (XPS). XPS revealed the presence of one gallium per 2-3 styrene sulfonate groups of the polymer brushes. The catalytic activity of the Lewis acid-functionalized brushes in a microreactor was demonstrated for the dehydration of oximes, using cinnamaldehyde oxime as a model substrate, and for the formation of oxazoles by ring closure of ortho-hydroxy oximes. The catalytic activity of the microreactor could be maintained by periodic reactivation by treatment with GaCl3.

Optical fiber-based on-line UV/Vis spectroscopic monitoring of chemical reaction kinetics under high pressure in a capillary microreactor.

With a miniaturized (3 microL volume) fiber-optics based system for on-line measurement by UV/Vis spectroscopy, the reaction rate constants (at different pressures) and the activation volumes (deltaV(not =)) were determined for a nucleophilic aromatic substitution and an aza Diels-Alder reaction in a capillary microreactor.