A Novel Educational Approach for Safe Endodontic Syringe Irrigation: A Randomized Controlled In Vitro Study.

OBJECTIVE: Syringe irrigation, commonly used for delivering sodium hypochlorite (NaOCl) during root canal treatment, requires careful handling to prevent NaOCl extrusion into periapical tissues. This randomized controlled in vitro study aimed to quantify syringe plunger forces exerted by dental undergraduates and to assess the impact of an educational intervention on adherence to safe irrigant delivery parameters. METHODS: Fifty-two undergraduates performed syringe irrigation at three intervals: baseline (T1), after two weeks (T2), and after 12 weeks (T3). At T1, irrigation was conducted without prior educational intervention, while at T2, it was preceded by an intervention. The educational intervention involved a short video highlighting safe irrigation practices, including plunger force and time recommendations for syringe irrigation. At T3, the undergraduates were randomly allocated to two groups: One received a repeated intervention, while the other did not. Syringe irrigation was performed on a 3D-printed tooth using two side-vented cannulas: one of 25 Gauge (G) and another of 30 G. A syringe equipped with a force sensor recorded the plunger forces. Based on earlier research, plunger forces exceeding 10 Newtons (N) for the 25 G cannula and 40 N for the 30 G cannula were deemed critical. The data were subjected to descriptive statistical analyses. RESULTS: Overall, the mean of maximum values of plunger forces remained under 10 N for the 25 G and below 20 N for the 30 G cannulas, with only few measurements exceeding 40 N. Instances of surpassing the critical plunger force threshold were more common with the 25 G side-vented cannula than with the 30 G variant. At T3, the group that received the repeated educational intervention exhibited lower average maximum plunger forces for both types of cannulas compared with the group that did not receive the intervention. CONCLUSION: Integrating plunger force measurements with targeted educational interventions presents an effective approach for instructing undergraduates in the proper techniques of syringe irrigation. The findings suggest that, generally, undergraduates do not apply excessive plunger forces that could risk apical irrigant extrusion. The implementation of repeated educational interventions has been shown to decrease the plunger forces exerted by undergraduates, underscoring its effectiveness in fostering safe endodontic irrigation.

Influence of universal adhesives and silane coupling primer on bonding performance to CAD-CAM resin-based composites: A laboratory investigation.

OBJECTIVE: Obtaining strong resin bonds to computer-aided design and computer-aided manufacturing (CAD-CAM) resin-based composites with dispersed fillers (CCRBCs) poses a challenge. Therefore, this study aimed to assess the effect of three universal adhesives and a two-component silane coupling agent on the shear bond strength to three (CCRBCs). MATERIALS AND METHODS: Eight hundred and sixty-four specimens of Brilliant Crios, Lava Ultimate, and Tetric CAD were polished or grit blasted, bonded with Adhese Universal DC, One Coat 7 Universal (OC7), and Scotchbond Universal Plus Adhesive (SBU) with or without a silane primer. Shear bond strength was measured after 24 h and 10,000 thermocycles. Linear regressions were performed (α = 0.05). RESULTS: After thermocycling, bond strengths were similar for the universal adhesives on polished Brilliant Crios and Lava Ultimate (p ≥ 0.408). Grit blasted Tetric CAD showed no significant differences (p ≥ 0.096). The silane primer had minimal impact on grit blasted Tetric CAD (p ≥ 0.384). The silane primer increased the bond strength of OC7 to Brilliant Crios (p = 0.001) but decreased the adhesion of SBU to Brilliant Crios and Lava Ultimate (p ≤ 0.018). CONCLUSIONS: Bond strength of universal adhesives varied with CCRBC type. The two-component silane coupling agent showed mixed effects on adhesive performance. CLINICAL SIGNIFICANCE: Selecting universal adhesives from the same CCRBC product line does not always guarantee superior bond strength. The efficacy of silane coupling agents differs based on the bonding substrate.

Endodontic and restorative management of an adult with avulsion of multiple teeth: A case report with 5 years and 9 months of follow-up.

Simultaneous avulsion of four or more teeth is a rare event. This case report examines the dental care given to an adult who, during a bicycle accident, experienced the avulsion of a mandibular incisor as well as all of his maxillary incisors. In the immediate aftermath of the accident, four out of the five incisors were located, promptly collected, and stored in a tooth rescue box, all within a 20-min window. Replantation and splinting were performed on the day of the accident. Endodontic treatment involved sequential intracanal dressing with an antibiotic-corticosteroid paste followed by calcium hydroxide prior to root canal obturation. 3 months post-accident, signs of external replacement resorption (ERR) began to appear in all the replanted teeth. The gap created by the missing maxillary central incisor was managed with a three-unit fixed dental prosthesis, despite the onset of ERR in the incisors used as abutment teeth. Regular follow-ups showed a relatively slow ERR progression rate over a span of nearly 6 years. The patient expressed satisfaction with both the esthetic and functional outcomes. This case, marked by multiple avulsions, underscores the importance of immediate and appropriate intervention alongside the imperative for carefully considered long-term management strategies. Given the decelerated bone remodeling rate in adults, ERR generally progresses at a slower pace than in children. Accordingly, this case demonstrates the viability of retaining replanted teeth over the long term, even when these teeth have been subjected to nonphysiological storage for extended durations, a factor known to impede periodontal healing.

ChatGPT's performance in dentistry and allergy-immunology assessments: a comparative study.

Large language models (LLMs) such as ChatGPT have potential applications in healthcare, including dentistry. Priming, the practice of providing LLMs with initial, relevant information, is an approach to improve their output quality. This study aimed to evaluate the performance of ChatGPT 3 and ChatGPT 4 on self-assessment questions for dentistry, through the Swiss Federal Licensing Examination in Dental Medicine (SFLEDM), and allergy and clinical immunology, through the European Examination in Allergy and Clinical Immunology (EEAACI). The second objective was to assess the impact of priming on ChatGPT's performance. The SFLEDM and EEAACI multiple-choice questions from the University of Bern's Institute for Medical Education platform were administered to both ChatGPT versions, with and without priming. Performance was analyzed based on correct responses. The statistical analysis included Wilcoxon rank sum tests (α=0.05). The average accuracy rates in the SFLEDM and EEAACI assessments were 63.3% and 79.3%, respectively. Both ChatGPT versions performed better on EEAACI than SFLEDM, with ChatGPT 4 outperforming ChatGPT 3 across all tests. ChatGPT 3's performance exhibited a significant improvement with priming for both EEAACI (p=0.017) and SFLEDM (p=0.024) assessments. For ChatGPT 4, the priming effect was significant only in the SFLEDM assessment (p=0.038). The performance disparity between SFLEDM and EEAACI assessments underscores ChatGPT's varying proficiency across different medical domains, likely tied to the nature and amount of training data available in each field. Priming can be a tool for enhancing output, especially in earlier LLMs. Advancements from ChatGPT 3 to 4 highlight the rapid developments in LLM technology. Yet, their use in critical fields such as healthcare must remain cautious owing to LLMs' inherent limitations and risks.

Deep Margin Elevation: Next-Level Adhesive Dentistry to Avoid Surgical Crown Lengthening.

Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However, restorative techniques employing adhesive dentistry may provide viable alternatives to or complement SCL in select cases without the repercussions of surgical bone removal and open interproximal spaces. One such clinical technique, deep margin elevation (DME), employs a direct restoration to relocate the cervical margin of small subgingival defects of posterior teeth supragingivally. The "elevated" margin simplifies impression-making and bonding of indirect restorations, especially inlays and onlays. Recent scientific systematic literature reviews indicate favorable clinical outcomes and suggest that DME restorations made with scrupulous care have high success rates and are compatible with periodontal health. Optimal working field isolation, meticulous placement of matrices, proper bonding and buildup procedure, as well as regular maintenance and follow-up are essential for success. This article provides an overview of this approach.

Exploring the staining potential of 1 GSK-3 inhibitors in bovine teeth: 2 a one-year laboratory investigation.

GSK-3 inhibitors, such as Tideglusib (TG) and CHIR-99021 (CHIR), show promise in stimulating reparative dentin formation. The aim of this study was to assess the discoloration potential of TG and CHIR in an established in vitro model. Enamel-dentin specimens made from bovine incisors were randomly allocated to five groups (n=15 each): group bovine blood (BB), group dimethyl sulfoxide (DMSO), group TG, group CHIR, and group mineral trioxide aggregate (MTA). Each specimen had a central cavity in which the respective material was applied and sealed with resin-based luting material. Color determination was conducted using a dental spectrophotometer at t0 (before filling), t1 (immediately after filling), t2 (after one week), t3 (after one month), t4 (after three months), t5 (after six months), and t6 (after one year). Statistical analysis involved descriptive statistics, Kruskal-Wallis tests, and analysis of variance (α=0.05). Group BB and group CHIR exhibited the most significant decrease in lightness (ΔL*) after one year (ΔL*-4.7 and ΔL* -5.7, respectively), whereas groups DMSO, TG, and MTA showed minimal changes (DMSO ΔL*: -0.3; TG ΔL*: 1.4; MTA ΔL*: -0.5). Group BB and CHIR exhibited the highest ΔE values (6.4Å}0.6 and 6.5Å}0.8, respectively). Unlike CHIR, TG did not result in discoloration exceeding the threshold of visual perception, defined by a ΔE value of 5.5, during the one-year observation period. This laboratory study therefore suggests that TG could be utilized for indirect or direct pulp capping without major discoloration concerns. However, additional research is required to corroborate these findings.

Dental injuries in Swiss soccer supporters: A comparative study of regular fans, ultras, and hooligans for public health strategies.

OBJECTIVES: Violence among soccer supporters continues to pose a significant public health concern in many parts of the world. In Switzerland, hooliganism is largely uninvestigated. This study aimed to examine incidents of violence and associated dental injuries among different groups of soccer supporters, as well as assess the impact of intoxicants on their behavior, using survey data from regular fans, ultras, and hooligans in the Swiss Football League. MATERIAL AND METHODS: A cross-sectional survey using a standardized questionnaire was conducted among distinct factions of soccer supporters in the Swiss Football League in 2022. A total of 165 participants self-identified as belonging to one of three subgroups: "regular fan," "ultra," or "hooligan." Data were gathered on physical altercations, dental injuries, possession of mouthguards, intoxicant use, and medical assistance. Descriptive statistics, logistic regression models, and significance tests were used for data analysis (α = .05). RESULTS: Hooligans had a higher frequency of dental injuries resulting from fights than ultras and regular fans. Hooligans with 11-20 fights per soccer season had a 9.6 times higher probability of dental trauma than those with 0-5 fights (p = .048). Possession of a mouthguard was associated with a lower risk of dental injuries for hooligans but an increased risk for ultras. Additionally, hooligans were found to differ significantly from other groups in their consumption of amphetamines and cocaine (p < .001). CONCLUSIONS: The study found a strong link between physical altercations and dental injuries among soccer supporters. To promote better prevention, there is a necessity for enhanced educational initiatives facilitated by dentists to amplify the dissemination of mouthguards. Furthermore, it is crucial to raise awareness regarding their proper fitting to minimize the occurrence of combat-related dental injuries. Health authorities and other stakeholders should take a comprehensive approach to addressing some of the root causes of violent behavior, which include alcohol abuse and illicit substance consumption.

Impact of Irradiation on the Adhesive Performance of Resin-Based Dental Biomaterials: A Systematic Review of Laboratory Studies.

Head and neck cancers are a significant global health burden, with radiation therapy being a frequently utilized treatment. The aim of this systematic review was to provide a critical appraisal of laboratory studies that assessed the effect of irradiation on the adhesive performance of resin-based biomaterials. The analysis included 23 laboratory studies obtained from five databases, with most studies using human enamel, dentin, or both, and bonding procedures involving the fabrication of direct restorations, standardized specimens, bonding of orthodontic brackets, and luting of endodontic fiber posts. The protocols used for irradiation varied, with most studies exposing specimens made from extracted teeth to irradiation using cabinet irradiators to simulate treatment of head and neck cancer. The findings indicate that irradiation reduces the bond strength of dental adhesives and resin-based composites on flat, ground enamel and dentin specimens, with different adhesives and timing of irradiation having a significant impact on adhesive performance. Irradiation also increased microleakage in most studies. The effect of irradiation on marginal adaptation of direct resin-based composite restorations was inconclusive. This systematic review indicates that irradiation has detrimental effects on the adhesive performance of resin-based biomaterials and highlights the need for further clinical and laboratory studies evaluating the performance of adhesive materials and approaches to improve it.

Implications of large language models such as ChatGPT for dental medicine.

OBJECTIVE: This article provides an overview of the implications of ChatGPT and other large language models (LLMs) for dental medicine. OVERVIEW: ChatGPT, a LLM trained on massive amounts of textual data, is adept at fulfilling various language-related tasks. Despite its impressive capabilities, ChatGPT has serious limitations, such as occasionally giving incorrect answers, producing nonsensical content, and presenting misinformation as fact. Dental practitioners, assistants, and hygienists are not likely to be significantly impacted by LLMs. However, LLMs could affect the work of administrative personnel and the provision of dental telemedicine. LLMs offer potential for clinical decision support, text summarization, efficient writing, and multilingual communication. As more people seek health information from LLMs, it is crucial to safeguard against inaccurate, outdated, and biased responses to health-related queries. LLMs pose challenges for patient data confidentiality and cybersecurity that must be tackled. In dental education, LLMs present fewer challenges than in other academic fields. LLMs can enhance academic writing fluency, but acceptable usage boundaries in science need to be established. CONCLUSIONS: While LLMs such as ChatGPT may have various useful applications in dental medicine, they come with risks of malicious use and serious limitations, including the potential for misinformation. CLINICAL SIGNIFICANCE: Along with the potential benefits of using LLMs as an additional tool in dental medicine, it is crucial to carefully consider the limitations and potential risks inherent in such artificial intelligence technologies.

ChatGPT: Chances and Challenges for Dentistry.

The artificial intelligence (AI) chatbot ChatGPT has generated both huge interest and deep concern since its launch in November 2022.1 ChatGPT, a large language model (LLM) with a conversational interface, has been trained on vast amounts of human-generated text and has the ability to respond to questions and complete various text-related tasks. The use of ChatGPT and similar LLMs in dentistry is unlikely to significantly impact the daily routine of most dental healthcare personnel but could streamline administrative workflows and potentially serve as an additional tool for clinical decision support in the future. However, this is contingent on the availability of comprehensive, up-to-date, and unbiased data. The use of LLMs also causes privacy and cybersecurity concerns. It is therefore crucial to implement robust data protection measures and strong defenses against malicious use of LLMs. Although ChatGPT provides succinct answers to most queries, its lack of reliability, transparency, and up-to-date knowledge compared with conventional search engines is a major drawback, particularly for health-related queries.

Deep margin elevation-Present status and future directions.

OBJECTIVE: Deep margin elevation (DME) is a treatment approach to relocate the cervical margin of teeth with subgingival defects to a supragingival position with a direct restoration to facilitate rubber dam isolation, impression taking, and bonding of indirect restorations. This article provides an overview of the current scientific evidence on DME and future directions for research. OVERVIEW: The review included 38 studies on DME, most conducted in vitro. These studies indicate that DME has no detrimental effect on the fracture resistance of restored teeth. Evidence on the impact of DME on marginal quality is conflicting, but most in vitro studies observed no negative effect. Clinical studies, most comprising small patient cohorts, demonstrated favorable restorative outcomes and suggest that DME restorations made with scrupulous care are compatible with periodontal health. Bleeding on probing may occur more frequently at sites with DME, though evidence on this is not unequivocal. CONCLUSIONS: Current evidence, based largely on laboratory studies and limited clinical data, supports DME as a viable approach to restore teeth with localized subgingival defects. However, further clinical studies with long-term follow-ups are required to provide corroborative evidence. CLINICAL SIGNIFICANCE: Current evidence suggests that DME is a viable approach to restore teeth with localized subgingival defects as a possible alternative to surgical crown lengthening. Proper working field isolation, meticulous care in the bonding and buildup procedure, and biofilm removal through patient-performed oral hygiene and professional maintenance care are crucial. As scant clinical trial-based evidence is available today, further research is needed to evaluate the long-term performance of DME restorations and their impact on periodontal health.

Quality of CAD-CAM inlays placed on aged resin-based composite restorations used as deep margin elevation: a laboratory study.

OBJECTIVES: To assess the impact of the age of resin-based composite (RBC) restorations used for deep margin elevation (DME) on the marginal quality and fracture resistance of inlays. MATERIALS AND METHODS: Permanent human molars with direct RBC restorations, involving the mesial, occlusal, and distal surface (MOD), were allocated to four groups (each n = 12). Half of the teeth underwent thermomechanical loading including 240,000 occlusal load cycles and 534 thermal cycles (TML, 5 °C/55 °C; 49 N, 1.7 Hz). With RBC left in one proximal box as DME, all teeth received MOD inlays, made from lithium disilicate (LDS) or a polymer-infiltrated ceramic network material (PICN). The restored teeth underwent TML including 1.2 million occlusal cyclic loadings and 2673 thermal cycles. The marginal quality was assessed at baseline and after both runs of TML. Load-to-fracture tests were performed. The statistical analysis comprised multiple linear regressions (α = 0.05). RESULTS: Simulated aging of RBC restorations had no significant effect on the marginal quality at the interface between the RBC and the tooth and the RBC and the inlay (p ≥ 0.247). Across time points, higher percentages of non-continuous margin were observed between the inlay and the tooth than between the tooth and the RBC (p ≤ 0.039). The age of the DME did not significantly affect the fracture resistance (p ≥ 0.052). CONCLUSIONS: Artificial aging of RBC restorations used for DME had no detrimental effect on the marginal quality and fracture resistance of LDS and PICN inlays. CLINICAL RELEVANCE: This laboratory study suggests that-in select cases-intact, direct RBC restorations not placed immediately before the delivery of an indirect restoration may be used for DME.

Head and dental injuries among farriers and hoof care practitioners: A nationwide survey in Switzerland.

BACKGROUND/AIM: There is a paucity of evidence on injuries sustained by farriers and hoof care practitioners, two professions exposed to unique occupational hazards. The aim of this study was to collect and examine data on occupational head/face and dental injuries among farriers and hoof care practitioners in a nationwide survey in Switzerland. MATERIALS AND METHODS: Data on occupational head/face and dental injuries were gathered in a questionnaire-based, voluntary survey, which was mailed to all farriers and hoof care practitioners in Switzerland. The statistical analysis comprised multiple regressions with a nested design (α = 0.05). RESULTS: The survey included 278 respondents (response rate of 78.1%). Head/face injuries were more frequently reported by farriers than hoof care practitioners (60.6% and 20.7%, respectively). Among full-time workers, farriers had a higher chance of an occupational head/face injury compared with hoof care practitioners (p = .007). The rate of dental injuries, mainly related to a horse kick, was 11.1% and 1.9% among farriers and hoof care practitioners, respectively. Negligence in wearing mandatory eye protection was reported by 37.5% of respondents. CONCLUSIONS: Farriery and hoof care management entail a significant risk of occupational head/face and dental injuries. Preventive safety measures-eye protection in particular-and knowledge in dental first aid should be promoted among farriers and hoof care practitioners to decrease the frequency and severity of work-related injuries.

General and dental injuries sustained at concerts: A questionnaire-based study.

BACKGROUND/AIM: Evidence on the risk of injury at concerts is scant. The aim of this study was to collect data on general and dental injuries incurred by concertgoers in Switzerland and to investigate whether the frequency of accidents was related to music genre, gender and consumption of alcohol. MATERIALS AND METHODS: A questionnaire-based, cross-sectional study comprising 451 concertgoers in Switzerland was conducted on the timeframe January 2019 to February 2021. The survey gathered data on general and dental injuries, alcohol consumption and drug use. The statistical analysis included Fisher's exact tests, chi-squared tests, rank sum tests and logistic regressions (α = .05). RESULTS: There were 28.8% of respondents who reported an injury incurred at a concert. Contusion was the most prevalent injury, accounting for 33.8% of all injuries. Legs were the most commonly injured body part (34.6%). Injuries to their mouth/lips/teeth were reported by 17.7% of respondents. Dental injuries, accounting for 4.6% of all reported injuries, comprised four tooth fractures, one lateral luxation and one avulsion. The risk of injury while attending punk rock concerts was 8.6 times higher than for pop concerts (p < .001). In comparison with pop concerts, metal and rock concerts had an increased risk of injury by factors of 5.1 and 2.3, respectively (p ≤ .029). Neither gender nor drug use had a significant effect on the injury risk (p ≥ .3). Heavy alcohol consumption (>5 standard glasses) increased the risk of injury by a factor of 2.3 (p = .028). CONCLUSIONS: This study suggests that concert attendees at rock, metal and punk concerts face an increased risk of injury, which is likely due to the frequency of aggressive dance styles such as moshing. Heavy alcohol consumption leads to a greater risk of injury at concerts.

ChatGPT's performance in dentistry and allergyimmunology assessments: a comparative study.

Large language models (LLMs) such as ChatGPT have potential applications in healthcare, including dentistry. Priming, the practice of providing LLMs with initial, relevant information, is an approach to improve their output quality. This study aimed to evaluate the performance of ChatGPT 3 and ChatGPT 4 on self-assessment questions for dentistry, through the Swiss Federal Licensing Examination in Dental Medicine (SFLEDM), and allergy and clinical immunology, through the European Examination in Allergy and Clinical Immunology (EEAACI). The second objective was to assess the impact of priming on ChatGPT's performance. The SFLEDM and EEAACI multiple-choice questions from the University of Bern's Institute for Medical Education platform were administered to both ChatGPT versions, with and without priming. Performance was analyzed based on correct responses. The statistical analysis included Wilcoxon rank sum tests (alpha=0.05). The average accuracy rates in the SFLEDM and EEAACI assessments were 63.3% and 79.3%, respectively. Both ChatGPT versions performed better on EEAACI than SFLEDM, with ChatGPT 4 outperforming ChatGPT 3 across all tests. ChatGPT 3's performance exhibited a significant improvement with priming for both EEAACI (p=0.017) and SFLEDM (p=0.024) assessments. For ChatGPT 4, the priming effect was significant only in the SFLEDM assessment (p=0.038). The performance disparity between SFLEDM and EEAACI assessments underscores ChatGPT's varying proficiency across different medical domains, likely tied to the nature and amount of training data available in each field. Priming can be a tool for enhancing output, especially in earlier LLMs. Advancements from ChatGPT 3 to 4 highlight the rapid developments in LLM technology. Yet, their use in critical fields such as healthcare must remain cautious owing to LLMs' inherent limitations and risks.

Do magnification loupes affect the precision of cavity preparations made by undergraduates? A randomized crossover study.

BACKGROUND: Evidence on the effect of magnification devices on procedure quality in restorative dentistry is scant. This study therefore aimed to assess, under simulated clinical conditions, if magnification loupes affect the quality of preparations carried out by undergraduate dental students. METHODS: 59 undergraduate dental students underwent two visual acuity tests, based on which they were divided into a "low visual acuity group" (visus < 1) and a "good visual acuity group" (visus ≥ 1). In a randomized crossover experiment, participants performed a two-dimensional S and a three-dimensional O figure preparation with a dental handpiece on standardized acrylic blocs designed for preclinical restorative training. Each participant carried out the preparation tasks twice, once with magnification loupes (2.5×) and once without. Two blinded investigators independently evaluated parameters of preparation precision. Data were analyzed using Spearman rank correlation coefficients, intra-class correlation coefficients, and Wilcoxon rank-sum tests (α = 0.05). RESULTS: Participants from the "low visual acuity group" did not show a statistically significant improvement in accuracy when they used magnification loupes for the S figure preparation (p ≥ 0.0625). Participants from the "high visual acuity group" obtained a higher level of accuracy (p ≤ 0.0012) when they used magnification loupes for the S figure preparation. The use of magnification loupes had no statistically significant effect on the accuracy parameters of the O figure cavity preparations (p ≥ 0.1865). Participants with high visual acuity achieved only a marginally better accuracy than participants with a visus < 1. CONCLUSIONS: This study suggests that loupes with 2.5× magnification increase the accuracy of two-dimensional preparations while they have no significant effect, favorable or otherwise, on the accuracy of complex, three-dimensional cavity preparations of untrained dental students.

STAndard Reporting of CAries Detection and Diagnostic Studies (STARCARDDS).

AIM: The aim of this paper is to present recommendations from an international workshop which evaluated the methodology and reporting of caries diagnostic studies. As a unique feature, this type of studies is focused on caries lesion detection and assessment, and many of them are carried out in vitro, because of the possibility of histological validation of the whole caries spectrum. This feature is not well covered in the existing reporting STARD guideline within the EQUATOR Network. PARTICIPANTS AND METHODS: An international working group of 13 cariology researchers was formed. The STARD checklist was reviewed and modified for caries detection and diagnosis purposes, in a three-step process of evaluation, consensual modification, and delivery during three 2-day workshops over 18 months. Special attention was paid to reporting requirements of caries studies that solely focus on reliability. RESULTS: The STARD checklist was modified in 14/30 items, with an emphasis on issues of sample selection (tooth selection in in vitro studies), blinding, and detailed reporting of results. CONCLUSION: Following STARCARDDS (STAndard Reporting of CAries Detection and Diagnostic Studies) is expected to result in complete reporting of study design and methodology in future caries diagnosis and detection experiments both in vivo and in vitro, thus allowing for better comparability of studies and higher quality of systematic reviews. CLINICAL RELEVANCE: Standardization of caries diagnostic studies leads to a better comparability among future studies, both in vivo and in vitro.

Partial pulpotomy without age restriction: a retrospective assessment of permanent teeth with carious pulp exposure.

OBJECTIVES: This study aimed to retrospectively evaluate clinical and radiographic outcomes of partial pulpotomy performed in permanent teeth with carious pulp exposure. MATERIALS AND METHODS: Records of patients undergoing treatment at an undergraduate dental clinic between 2010 and 2019 were screened for partial pulpotomies in teeth with a presumptive diagnosis of normal pulp or reversible pulpitis. The follow-up had to be ≥ 1 year. Patient data were retrieved and analyzed using Mantel-Cox chi square tests and Kaplan-Meier statistics. The level of significance was set at α = 0.05. RESULTS: Partial pulpotomy was performed in 111 cases, of which 64 (58%) fulfilled the eligibility criteria. At the time of partial pulpotomy, the mean age was 37.3 (± 13.5) years (age range 18-85). The mean observation period was 3.1 (± 2.0) years. Two early failures (3.1%) and five late failures (7.7%) were recorded. The overall success rate of maintaining pulp vitality was 89.1%, with 98.4% tooth survival. The cumulative pulp survival rates of partial pulpotomy in patients aged < 30 years, between 30 and 40 years, and > 40 years were 100%, 75.5%, and 90.5%, respectively, with no significant difference between the age groups (p = 0.225). At follow-up, narrowing of the pulp canal space and tooth discoloration were observed in 10.9% and 3.1% of cases, respectively. CONCLUSIONS: Across age groups, partial pulpotomy achieved favorable short and medium-term outcomes in teeth with carious pulp exposure. CLINICAL RELEVANCE: Adequate case selection provided, partial pulpotomy is a viable operative approach to treat permanent teeth with deep carious lesions irrespective of patients' age.

Effect of repeated ultrasonic instrumentation on single-unit crowns: a laboratory study.

OBJECTIVES: This laboratory study aimed to assess the effects of ultrasonic instrumentation, simulating 10 years of supportive periodontal therapy (SPT), on single-unit crowns. MATERIALS AND METHODS: Standardized crowns were fabricated from porcelain-fused-to-metal (PFM) (n = 12), zirconia (ZrO2) (n = 12), lithium disilicate (LDS) (n = 12), feldspar ceramic (FSFC) (n = 6), and polymer-infiltrated ceramic network material (PICN) (n = 6). The crowns, luted on PICN abutments with resin-based luting material (RBLM), and if applicable glass ionomer cement (GILC), underwent thermal cycling and trimonthly ultrasonic instrumentation. After 1 and 10 years of simulated SPT, restoration quality assessments were performed, comprising profilometric surface roughness measurements, marginal integrity evaluations, and scores for luting material remnants and visible cracks. The statistical analysis included multiple logistic regressions with nested designs (α = 0.05). RESULTS: During simulated SPT, bulk fractures (n = 2) and a de-cementation failure (n = 1) of LDS and ZrO2 crowns were observed. No significant change in roughness was detected after 10 years (p = 0.078). Over time, marginal defects increased (p = 0.010), with PFM crowns showing the highest rate of chippings at sites with a narrow shoulder. Fewer marginal defects were detectable on crowns luted with RBLM compared with GILC (p = 0.005). Luting material remnants decreased during SPT (p < 0.001). Ultrasonic instrumentation caused cracks in most crown materials, in particular at sites with a narrow shoulder and in PFM crowns. CONCLUSIONS: Repeated ultrasonic instrumentation may damage single-unit crowns. PFM crowns with a narrow, all-ceramic margin are especially prone to defects. CLINICAL RELEVANCE: Frequent ultrasonic instrumentation of restoration margins of fixed dental prostheses, PFM crowns in particular, ought to be avoided.

Dental and general injuries among ski and snowboard instructors in Switzerland, Germany, and Austria-A questionnaire-based study.

OBJECTIVES: Data on the injury rate of skiers and snowboarders are currently limited. The aim of this study was, therefore, to assess the frequency of general and dental injuries among snow sports instructors, to investigate the use of protective gear and mouthguards, and to evaluate snow sports instructors' dental first aid know-how. MATERIAL AND METHODS: A questionnaire-based, cross-sectional study comprising 603 ski and snowboard instructors from Austria, Germany, and Switzerland was conducted in the timeframe December 2019 to May 2020. The survey gathered data on general and dental injuries sustained by instructors, protective gear usage, and know-how in dental first aid. The statistical analysis included χ2 tests, Wilcoxon rank-sum and Kruskal-Wallis tests, and linear regression analysis. The level of significance was set at α = .05. RESULTS: Out of the 603 instructors, 326 (54.1%) sustained an injury while skiing or snowboarding. Forty (6.6%) reported a snow sports-related dental injury. The rates of injuries related to skiing and snowboarding showed no significant difference (p = .0952). Compared with snowboarding on slopes, backcountry snowboarding entailed fewer risks of injury for snowboard instructors (p = .012). Knowledge of dental first aid was limited, with 45.8% of instructors uninformed about the possibility of replanting avulsed teeth. 10.1% of instructors were familiar with tooth rescue boxes. None of the instructors surveyed had a tooth rescue box in their first aid equipment. Helmet usage was high (95.6%) among snow sports instructors, whereas mouthguard usage was rare (3.5%). CONCLUSIONS: Protective gear usage among snow sports instructors is high. The risk of dental injury while skiing or snowboarding is lower compared with other sports. Dental first aid know-how ought to be enhanced in snow sports communities to ensure that appropriate first aid is provided in case of a dental injury related to skiing or snowboarding.