RESUMEN
The imperative shift towards renewable energy sources, driven by environmental concerns and climate change, has cast a spotlight on solar energy as a clean, abundant, and cost-effective solution. To harness its potential, accurate modeling of photovoltaic (PV) systems is crucial. However, this relies on estimating elusive parameters concealed within PV models. This study addresses these challenges through innovative parameter estimation by introducing the logarithmic spiral search and selective mechanism-based arithmetic optimization algorithm (Ls-AOA). Ls-AOA is an improved version of the arithmetic optimization algorithm (AOA). It combines logarithmic search behavior and a selective mechanism to improve exploration capabilities. This makes it easier to obtain accurate parameter extraction. The RTC France solar cell is employed as a benchmark case study in order to ensure consistency and impartiality. A standardized experimental framework integrates Ls-AOA into the parameter tuning process for three PV models: single-diode, double-diode, and three-diode models. The choice of RTC France solar cell underscores its significance in the field, providing a robust evaluation platform for Ls-AOA. Statistical and convergence analyses enable rigorous assessment. Ls-AOA consistently attains low RMSE values, indicating accurate current-voltage characteristic estimation. Smooth convergence behavior reinforces its efficacy. Comparing Ls-AOA to other methods strengthens its superiority in optimizing solar PV model parameters, showing that it has the potential to improve the use of solar energy.
Asunto(s)
Algoritmos , Energía Solar , Modelos TeóricosRESUMEN
Maintaining stable voltage levels is essential for power systems' efficiency and reliability. Voltage fluctuations during load changes can lead to equipment damage and costly disruptions. Automatic voltage regulators (AVRs) are traditionally used to address this issue, regulating generator terminal voltage. Despite progress in control methodologies, challenges persist, including robustness and response time limitations. Therefore, this study introduces a novel approach to AVR control, aiming to enhance robustness and efficiency. A custom optimizer, the quadratic wavelet-enhanced gradient-based optimization (QWGBO) algorithm, is developed. QWGBO refines the gradient-based optimization (GBO) by introducing exploration and exploitation improvements. The algorithm integrates quadratic interpolation mutation and wavelet mutation strategy to enhance search efficiency. Extensive tests using benchmark functions demonstrate the QWGBO's effectiveness in optimization. Comparative assessments against existing optimization algorithms and recent techniques confirm QWGBO's superior performance. In AVR control, QWGBO is coupled with a cascaded real proportional-integral-derivative with second order derivative (RPIDD2) and fractional-order proportional-integral (FOPI) controller, aiming for precision, stability, and quick response. The algorithm's performance is verified through rigorous simulations, emphasizing its effectiveness in optimizing complex engineering problems. Comparative analyses highlight QWGBO's superiority over existing algorithms, positioning it as a promising solution for optimizing power system control and contributing to the advancement of robust and efficient power systems.
Asunto(s)
Algoritmos , Suministros de Energía EléctricaRESUMEN
The growing demand for solar energy conversion underscores the need for precise parameter extraction methods in photovoltaic (PV) plants. This study focuses on enhancing accuracy in PV system parameter extraction, essential for optimizing PV models under diverse environmental conditions. Utilizing primary PV models (single diode, double diode, and three diode) and PV module models, the research emphasizes the importance of accurate parameter identification. In response to the limitations of existing metaheuristic algorithms, the study introduces the enhanced prairie dog optimizer (En-PDO). This novel algorithm integrates the strengths of the prairie dog optimizer (PDO) with random learning and logarithmic spiral search mechanisms. Evaluation against the PDO, and a comprehensive comparison with eighteen recent algorithms, spanning diverse optimization techniques, highlight En-PDO's exceptional performance across different solar cell models and CEC2020 functions. Application of En-PDO to single diode, double diode, three diode, and PV module models, using experimental datasets (R.T.C. France silicon and Photowatt-PWP201 solar cells) and CEC2020 test functions, demonstrates its consistent superiority. En-PDO achieves competitive or superior root mean square error values, showcasing its efficacy in accurately modeling the behavior of diverse solar cells and performing optimally on CEC2020 test functions. These findings position En-PDO as a robust and reliable approach for precise parameter estimation in solar cell models, emphasizing its potential and advancements compared to existing algorithms.
RESUMEN
Controlling the air-fuel ratio system (AFR) in lean combustion spark-ignition engines is crucial for mitigating emissions and addressing climate change. In this regard, this study proposes an enhanced version of the Aquila optimizer (ImpAO) with a modified elite opposition-based learning technique to optimize the feedforward (FF) mechanism and proportional-integral (PI) controller parameters for AFR control. Simulation results demonstrate ImpAO's outstanding performance compared to state-of-the-art algorithms. It achieves a minimum cost function value of 0.6759, exhibiting robustness and stability with an average ± standard deviation range of 0.6823±0.0047. The Wilcoxon signed-rank test confirms highly significant differences (p<0.001) between ImpAO and other algorithms. ImpAO also outperforms competitors in terms of elapsed time, with an average of 43.6072 s per run. Transient response analysis reveals that ImpAO achieves a lower rise time of 1.1845 s, settling time of 3.0188 s, overshoot of 0.1679%, and peak time of 4.0371 s compared to alternative algorithms. The algorithm consistently achieves lower error-based cost function values, indicating more accurate control. ImpAO demonstrates superior capabilities in tracking the desired input signal compared to other algorithms. Comparative assessment with recent metaheuristic algorithms further confirms ImpAO's superior performance in terms of transient response metrics and error-based cost functions. In summary, the simulation results provide strong evidence of the exceptional performance and effectiveness of the proposed ImpAO algorithm. It establishes ImpAO as a reliable and superior solution for optimizing the FF mechanism-supported PI controller for the AFR system, surpassing state-of-the-art algorithms and recent metaheuristic optimizers.
Asunto(s)
Águilas , Animales , Algoritmos , Benchmarking , Cambio Climático , Simulación por ComputadorRESUMEN
This paper discusses the merging of two optimization algorithms, atom search optimization and particle swarm optimization, to create a hybrid algorithm called hybrid atom search particle swarm optimization (h-ASPSO). Atom search optimization is an algorithm inspired by the movement of atoms in nature, which employs interaction forces and neighbor interaction to guide each atom in the population. On the other hand, particle swarm optimization is a swarm intelligence algorithm that uses a population of particles to search for the optimal solution through a social learning process. The proposed algorithm aims to reach exploration-exploitation balance to improve search efficiency. The efficacy of h-ASPSO has been demonstrated in improving the time-domain performance of two high-order real-world engineering problems: the design of a proportional-integral-derivative controller for an automatic voltage regulator and a doubly fed induction generator-based wind turbine systems. The results show that h-ASPSO outperformed the original atom search optimization in terms of convergence speed and quality of solution and can provide more promising results for different high-order engineering systems without significantly increasing the computational cost. The promise of the proposed method is further demonstrated using other available competitive methods that are utilized for the automatic voltage regulator and a doubly fed induction generator-based wind turbine systems.