RESUMEN
BACKGROUND: Dilute acid pretreatment is a promising process technology for the deconstruction of low-lignin lignocellulosic biomass, capable of producing high yields of hemicellulosic sugars and enhancing enzymatic yields of glucose as part of a biomass-to-biofuels process. However, while it has been extensively studied, most work has historically been conducted at relatively high acid concentrations of 1 - 4% (weight/weight). Reducing the effective acid loading in pretreatment has the potential to reduce chemical costs both for pretreatment and subsequent neutralization. Additionally, if acid loadings are sufficiently low, capital requirements associated with reactor construction may be significantly reduced due to the relaxation of requirements for exotic alloys. Despite these benefits, past efforts have had difficulty obtaining high process yields at low acid loadings without supplementation of additional unit operations, such as mechanical refining. RESULTS: Recently, we optimized the dilute acid pretreatment of deacetylated corn stover at low acid loadings in a 1-ton per day horizontal pretreatment reactor. This effort included more than 25 pilot-scale pretreatment experiments executed at reactor temperatures ranging from 150 - 170°C, residence times of 10 - 20 minutes and hydrolyzer sulfuric acid concentrations between 0.15 - 0.30% (weight/weight). In addition to characterizing the process yields achieved across the reaction space, the optimization identified a pretreatment reaction condition that achieved total xylose yields from pretreatment of 73.5% ± 1.5% with greater than 97% xylan component balance closure across a series of five runs at the same condition. Feedstock reactivity at this reaction condition after bench-scale high solids enzymatic hydrolysis was 77%, prior to the inclusion of any additional conversion that may occur during subsequent fermentation. CONCLUSIONS: This study effectively characterized a range of pretreatment reaction conditions using deacetylated corn stover at low acid loadings and identified an optimum reaction condition was selected and used in a series of integrated pilot scale cellulosic ethanol production campaigns. Additionally, several issues exist to be considered in future pretreatment experiments in continuous reactor systems, including the formation of char within the reactor, as well as practical issues with feeding herbaceous feedstock into pressurized systems.
RESUMEN
BACKGROUND: Our companion paper discussed the yield benefits achieved by integrating deacetylation, mechanical refining, and washing with low acid and low temperature pretreatment. To evaluate the impact of the modified process on the economic feasibility, a techno-economic analysis (TEA) was performed based on the experimental data presented in the companion paper. RESULTS: The cost benefits of dilute acid pretreatment technology combined with the process alternatives of deacetylation, mechanical refining, and pretreated solids washing were evaluated using cost benefit analysis within a conceptual modeling framework. Control cases were pretreated at much lower acid loadings and temperatures than used those in the NREL 2011 design case, resulting in much lower annual ethanol production. Therefore, the minimum ethanol selling prices (MESP) of the control cases were $0.41-$0.77 higher than the $2.15/gallon MESP of the design case. This increment is highly dependent on the carbohydrate content in the corn stover. However, if pretreatment was employed with either deacetylation or mechanical refining, the MESPs were reduced by $0.23-$0.30/gallon. Combing both steps could lower the MESP further by $0.44 ~ $0.54. Washing of the pretreated solids could also greatly improve the final ethanol yields. However, the large capital cost of the solid-liquid separation unit negatively influences the process economics. Finally, sensitivity analysis was performed to study the effect of the cost of the pretreatment reactor and the energy input for mechanical refining. A 50% cost reduction in the pretreatment reactor cost reduced the MESP of the entire conversion process by $0.11-$0.14/gallon, while a 10-fold increase in energy input for mechanical refining will increase the MESP by $0.07/gallon. CONCLUSION: Deacetylation and mechanical refining process options combined with low acid, low severity pretreatments show improvements in ethanol yields and calculated MESP for cellulosic ethanol production.
RESUMEN
Enzymatic conversion of oligomeric xylose and insoluble xylan remaining after effective pretreatment offers significant potential to improve xylan-to-xylose yields while minimizing yields of degredation products and fermentation inhibitors. In this work, a commercial enzyme cocktail is demonstrated to convert up to 70 % of xylo-oligomers found in dilute acid-pretreated hydrolyzate liquor at varying levels of dilution when supplemented with accessory enzymes targeting common side chains. Commercial enzyme cocktails are also shown to convert roughly 80 % of insoluble xylan remaining after effective high-solids, dilute acid pretreatment.
Asunto(s)
Ácidos/química , Xilanos/química , Zea mays/química , Aspergillus niger/enzimología , Endo-1,4-beta Xilanasas/metabolismo , Hidrólisis , Hojas de la Planta/química , Tallos de la Planta/química , Solubilidad , Xilosa/químicaRESUMEN
Six biomass pretreatment processes to convert switchgrass to fermentable sugars and ultimately to cellulosic ethanol are compared on a consistent basis in this technoeconomic analysis. The six pretreatment processes are ammonia fiber expansion (AFEX), dilute acid (DA), lime, liquid hot water (LHW), soaking in aqueous ammonia (SAA), and sulfur dioxide-impregnated steam explosion (SO(2)). Each pretreatment process is modeled in the framework of an existing biochemical design model so that systematic variations of process-related changes are consistently captured. The pretreatment area process design and simulation are based on the research data generated within the Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI) 3 project. Overall ethanol production, total capital investment, and minimum ethanol selling price (MESP) are reported along with selected sensitivity analysis. The results show limited differentiation between the projected economic performances of the pretreatment options, except for processes that exhibit significantly lower monomer sugar and resulting ethanol yields.
Asunto(s)
Biotecnología/economía , Biotecnología/métodos , Etanol/economía , Etanol/metabolismo , Lignina/metabolismo , Panicum/metabolismo , Amoníaco/farmacología , Compuestos de Calcio/farmacología , Carbohidratos/análisis , Calor , Óxidos/farmacología , Panicum/efectos de los fármacos , Dióxido de Azufre/farmacología , Ácidos Sulfúricos/farmacología , Agua/farmacologíaRESUMEN
Dilute sulfuric acid (DA), sulfur dioxide (SO(2)), liquid hot water (LHW), soaking in aqueous ammonia (SAA), ammonia fiber expansion (AFEX), and lime pretreatments were applied to Alamo, Dacotah, and Shawnee switchgrass. Application of the same analytical methods and material balance approaches facilitated meaningful comparisons of glucose and xylose yields from combined pretreatment and enzymatic hydrolysis. Use of a common supply of cellulase, beta-glucosidase, and xylanase also eased comparisons. All pretreatments enhanced sugar recovery from pretreatment and subsequent enzymatic hydrolysis substantially compared to untreated switchgrass. Adding beta-glucosidase was effective early in enzymatic hydrolysis while cellobiose levels were high but had limited effect on longer term yields at the enzyme loadings applied. Adding xylanase improved yields most for higher pH pretreatments where more xylan was left in the solids. Harvest time had more impact on performance than switchgrass variety, and microscopy showed changes in different features could impact performance by different pretreatments.
Asunto(s)
Biotecnología/métodos , Carbohidratos/biosíntesis , Enzimas/metabolismo , Panicum/metabolismo , Amoníaco/metabolismo , Carbohidratos/análisis , Carbohidratos/aislamiento & purificación , Celulasa/metabolismo , Ecotipo , Endo-1,4-beta Xilanasas/metabolismo , Glucosa/análisis , Hidrólisis , Panicum/citología , Panicum/ultraestructura , Estaciones del Año , Xilosa/análisis , beta-Glucosidasa/metabolismoRESUMEN
Feedstock quality of switchgrass for biofuel production depends on many factors such as morphological types, geographic origins, maturity, environmental and cultivation parameters, and storage. We report variability in compositions and enzymatic digestion efficiencies for three cultivars of switchgrass (Alamo, Dacotah and Shawnee), grown and harvested at different locations and seasons. Saccharification yields of switchgrass processed by different pretreatment technologies (AFEX, dilute sulfuric acid, liquid hot water, lime, and soaking in aqueous ammonia) are compared in regards to switchgrass genotypes and harvest seasons. Despite its higher cellulose content per dry mass, Dacotah switchgrass harvested after wintering consistently gave a lower saccharification yield than the other two varieties harvested in the fall. The recalcitrance of upland cultivars and over-wintered switchgrass may require more severe pretreatment conditions. We discuss the key features of different pretreatment technologies and differences in switchgrass cultivars and harvest seasons on hydrolysis performance for the applied pretreatment methods.
Asunto(s)
Agricultura , Biotecnología/métodos , Ecotipo , Enzimas/metabolismo , Panicum/metabolismo , Hidrólisis , Estaciones del AñoRESUMEN
This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.
RESUMEN
Accellerase 1000 cellulase, Spezyme CP cellulase, ß-glucosidase, Multifect xylanase, and beta-xylosidase were evaluated for hydrolysis of pure cellulose, pure xylan, and switchgrass solids from leading pretreatments of dilute sulfuric acid, sulfur dioxide, liquid hot water, lime, soaking in aqueous ammonia, and ammonia fiber expansion. Distinctive sugar release patterns were observed from Avicel, phosphoric acid swollen cellulose (PASC), xylan, and pretreated switchgrass solids, with accumulation of significant amounts of xylooligomers during xylan hydrolysis. The strong inhibition of cellulose hydrolysis by xylooligomers could be partially attributed to the negative impact of xylooligomers on cellulase adsorption. The digestibility of pretreated switchgrass varied with pretreatment but could not be consistently correlated to xylan, lignin, or acetyl removal. Initial hydrolysis rates did correlate well with cellulase adsorption capacities for all pretreatments except lime, but more investigation is needed to relate this behavior to physical and compositional properties of pretreated switchgrass.
Asunto(s)
Biotecnología/métodos , Celulasa/metabolismo , Celulosa/metabolismo , Glicósido Hidrolasas/metabolismo , Panicum/metabolismo , Xilanos/metabolismo , Adsorción , Glucosa/análisis , Hidrólisis , Cinética , Ácidos Fosfóricos/química , Xilosa/metabolismoRESUMEN
The US Department of Energy-funded Biomass Refining CAFI (Consortium for Applied Fundamentals and Innovation) project has developed leading pretreatment technologies for application to switchgrass and has evaluated their effectiveness in recovering sugars from the coupled operations of pretreatment and enzymatic hydrolysis. Key chemical and physical characteristics have been determined for pretreated switchgrass samples. Several analytical microscopy approaches utilizing instruments in the Biomass Surface Characterization Laboratory (BSCL) at the National Renewable Energy Laboratory (NREL) have been applied to untreated and CAFI-pretreated switchgrass samples. The results of this work have shown that each of the CAFI pretreatment approaches on switchgrass result in different structural impacts at the plant tissue, cellular, and cell wall levels. Some of these structural changes can be related to changes in chemical composition upon pretreatment. There are also apparently different structural mechanisms that are responsible for achieving the highest enzymatic hydrolysis sugar yields.
Asunto(s)
Biotecnología/métodos , Panicum/ultraestructura , Agricultura , Amoníaco/metabolismo , Pared Celular/metabolismo , Pared Celular/ultraestructura , Color , Ecotipo , Hidrólisis , Microfibrillas/ultraestructura , Panicum/citología , Porosidad , Propiedades de SuperficieRESUMEN
The objective of this work is to investigate the effects of cellulase loading and ß-glucosidase supplementation on enzymatic hydrolysis of pretreated Dacotah switchgrass. To assess the difference among various pretreatment methods, the profiles of sugars and intermediates were determined for differently treated substrates. For all pretreatments, 72 h glucan/xylan digestibilities increased sharply with enzyme loading up to 25mg protein/g-glucan, after which the response varied depending on the pretreatment method. For a fixed level of enzyme loading, dilute sulfuric acid (DA), SO(2), and Lime pretreatments exhibited higher digestibility than the soaking in aqueous ammonia (SAA) and ammonia fiber expansion (AFEX). Supplementation of Novozyme-188 to Spezyme-CP improved the 72 h glucan digestibility only for the SAA treated samples. The effect of ß-glucosidase supplementation was discernible only at the early phase of hydrolysis where accumulation of cellobiose and oligomers is significant. Addition of ß-glucosidase increased the xylan digestibility of alkaline treated samples due to the ß-xylosidase activity present in Novozyme-188.
Asunto(s)
Biotecnología/métodos , Panicum/metabolismo , beta-Glucosidasa/metabolismo , Celobiosa/metabolismo , Glucanos/metabolismo , Glucosa/metabolismo , Hidrólisis , Panicum/efectos de los fármacosRESUMEN
For this project, six chemical pretreatments were compared for the Consortium for Applied Fundamentals and Innovation (CAFI): ammonia fiber expansion (AFEX), dilute sulfuric acid (DA), lime, liquid hot water (LHW), soaking in aqueous ammonia (SAA), and sulfur dioxide (SO(2)). For each pretreatment, a material balance was analyzed around the pretreatment, optional post-washing step, and enzymatic hydrolysis of Dacotah switchgrass. All pretreatments+enzymatic hydrolysis solubilized over two-thirds of the available glucan and xylan. Lime, post-washed LHW, and SO(2) achieved >83% total glucose yields. Lime, post-washed AFEX, and DA achieved >83% total xylose yields. Alkaline pretreatments, except AFEX, solubilized the most lignin and a portion of the xylan as xylo-oligomers. As pretreatment pH decreased, total solubilized xylan and released monomeric xylose increased. Low temperature-long time or high temperature-short time pretreatments are necessary for high glucose release from late-harvest Dacotah switchgrass but high temperatures may cause xylose degradation.
Asunto(s)
Biotecnología/métodos , Metabolismo de los Hidratos de Carbono , Panicum/metabolismo , Polímeros/metabolismo , Biomasa , Pared Celular/metabolismo , Glucosa/análisis , Hidrólisis , Solubilidad , Xilosa/análisisRESUMEN
This work studied the benefits of adding different enzyme cocktails (cellulase, xylanase, ß-glucosidase) to pretreated switchgrass. Pretreatment methods included ammonia fiber expansion (AFEX), dilute-acid (DA), liquid hot water (LHW), lime, lime+ball-milling, soaking in aqueous ammonia (SAA), and sulfur dioxide (SO(2)). The compositions of the pretreated materials were analyzed and showed a strong correlation between initial xylan composition and the benefits of xylanase addition. Adding xylanase dramatically improved xylan yields for SAA (+8.4%) and AFEX (+6.3%), and showed negligible improvement (0-2%) for the pretreatments with low xylan content (dilute-acid, SO(2)). Xylanase addition also improved overall yields with lime+ball-milling and SO(2) achieving the highest overall yields from pretreated biomass (98.3% and 93.2%, respectively). Lime+ball-milling obtained an enzymatic yield of 92.3kg of sugar digested/kg of protein loaded.
Asunto(s)
Biotecnología/métodos , Enzimas/metabolismo , Panicum/metabolismo , Amoníaco/metabolismo , Biomasa , Biotecnología/economía , Endo-1,4-beta Xilanasas/metabolismo , Glucanos/metabolismo , Calor , Agua , Xilanos/metabolismo , beta-Glucosidasa/metabolismoRESUMEN
Through a Biomass Refining Consortium for Applied Fundamentals and Innovation among Auburn University, Dartmouth College, Michigan State University, the National Renewable Energy Laboratory, Purdue University, Texas A&M University, the University of British Columbia, and the University of California at Riverside, leading pretreatment technologies based on ammonia fiber expansion, aqueous ammonia recycle, dilute sulfuric acid, lime, neutral pH, and sulfur dioxide were applied to a single source of poplar wood, and the remaining solids from each technology were hydrolyzed to sugars using the same enzymes. Identical analytical methods and a consistent material balance methodology were employed to develop comparative performance data for each combination of pretreatment and enzymes. Overall, compared to data with corn stover employed previously, the results showed that poplar was more recalcitrant to conversion to sugars and that sugar yields from the combined operations of pretreatment and enzymatic hydrolysis varied more among pretreatments. However, application of more severe pretreatment conditions gave good yields from sulfur dioxide and lime, and a recombinant yeast strain fermented the mixed stream of glucose and xylose sugars released by enzymatic hydrolysis of water washed solids from all pretreatments to ethanol with similarly high yields. An Agricultural and Industrial Advisory Board followed progress and helped steer the research to meet scientific and commercial needs.
Asunto(s)
Biotecnología/métodos , Fermentación , Monosacáridos/metabolismo , Populus/química , Saccharomyces cerevisiae/metabolismo , Madera/química , Fuentes Generadoras de Energía , Glucosa/metabolismo , Hidrólisis , Xilosa/metabolismoRESUMEN
Pretreatment experiments were carried out to demonstrate high xylose yields at high solids loadings in two different batch pretreatment reactors under process-relevant conditions. Corn stover was pretreated with dilute sulfuric acid using a 4-l Steam Digester and a 4-l stirred ZipperClave reactor. Solids were loaded at 45% dry matter (wt/wt) after sulfuric acid catalyst impregnation using nominal particle sizes of either 6 or 18 mm. Pretreatment was carried out at temperatures between 180 and 200 degrees C at residence times of either 90 or 105 s. Results demonstrate an ability to achieve high xylose yields (>80%) over a range of pretreatment conditions, with performance showing little dependence on particle size or pretreatment reactor type. The high xylose yields are attributed to effective catalyst impregnation and rapid rates of heat transfer during pretreatment.
Asunto(s)
Ácidos Sulfúricos/química , Xilosa/biosíntesis , Zea mays/metabolismo , Reactores Biológicos , Biotecnología , Tamaño de la Partícula , Temperatura , Zea mays/químicaRESUMEN
The rheological characteristics of untreated and dilute acid pretreated corn stover (CS) slurries at high solids concentrations were studied under continuous shear using plate-plate type measurements. Slurry rheological behavior was examined as a function of insoluble solids concentration (10-40%), extent of pretreatment (0-75% removal of xylan) and particle size (-20 and -80 mesh). Results show that CS slurries exhibit shear-thinning behavior describable using a Casson model. Further, results demonstrate that the apparent viscosity and yield stress increase with increasing solids concentration (which corresponds to a decrease in free water). Dilute acid pretreatment leads to lower viscosity and yield stresses at equivalent solids concentrations, as does smaller particle size. Taken together, these findings are consistent with the hypothesis that the availability of free water in the slurry plays a significant role in determining its rheological behavior. In particular, as the free water content of the slurry decreases, e.g., with increasing solids concentration, the greater interaction among particles likely increases the apparent viscosity and yield stress properties of the slurry. The results also suggest that the availability of free water, and thereby slurry rheological properties, depend on the chemical composition of the corn stover as well as its physical characteristics such as particle size and porosity. Hydrophilic polymers within the cell wall, such as xylan or pectin, or larger pores within bigger particles, facilitate sequestration of water in the solid phase resulting in decreased availability of free water. Thus, dilute acid pretreated slurries, which contain smaller size particles having significantly lower xylan content than slurries of untreated milled stover, exhibit much lower viscosities and yield stresses than untreated slurries containing large particles at similar solid concentrations.
Asunto(s)
Carbohidratos/química , Modelos Químicos , Componentes Aéreos de las Plantas/química , Zea mays/química , Simulación por Computador , Tamaño de la Partícula , Soluciones , ViscosidadRESUMEN
Effectively releasing the locked polysaccharides from recalcitrant lignocellulose to fermentable sugars is among the greatest technical and economic barriers to the realization of lignocellulose biorefineries because leading lignocellulose pre-treatment technologies suffer from low sugar yields, and/or severe reaction conditions, and/or high cellulase use, narrow substrate applicability, and high capital investment, etc. A new lignocellulose pre-treatment featuring modest reaction conditions (50 degrees C and atmospheric pressure) was demonstrated to fractionate lignocellulose to amorphous cellulose, hemicellulose, lignin, and acetic acid by using a non-volatile cellulose solvent (concentrated phosphoric acid), a highly volatile organic solvent (acetone), and water. The highest sugar yields after enzymatic hydrolysis were attributed to no sugar degradation during the fractionation and the highest enzymatic cellulose digestibility ( approximately 97% in 24 h) during the hydrolysis step at the enzyme loading of 15 filter paper units of cellulase and 60 IU of beta-glucosidase per gram of glucan. Isolation of high-value lignocellulose components (lignin, acetic acid, and hemicellulose) would greatly increase potential revenues of a lignocellulose biorefinery.
Asunto(s)
Celulosa/metabolismo , Fraccionamiento Químico/métodos , Lignina/metabolismo , Celulosa/química , Hidrólisis , Solventes/químicaRESUMEN
Treatment of corn stover with aqueous ammonia removes most of the structural lignin, whereas retaining the majority of the carbohydrates in the solids. After treatment, both the cellulose and hemicellulose in corn stover become highly susceptible to enzymatic digestion. In this study, corn stover treated by aqueous ammonia was investigated as the substrate for lactic acid production by simultaneous saccharification and cofermentation (SSCF). A commercial cellulase (Spezyme-CP) and Lactobacillus pentosus American Type Culture Collection (ATCC) 8041 (Spanish Type Culture Collection [CECT]-4023) were used for hydrolysis and fermentation, respectively. In batch SSCF operation, the carbohydrates in the treated corn stover were converted to lactic acid with high yields, the maximum lactic acid yield reaching 92% of the stoichiometric maximum based on total fermentable carbohydrates (glucose, xylose, and arabinose). A small amount of acetic acid was also produced from pentoses through the phosphoketolase pathway. Among the major process variables for batch SSCF, enzyme loading and the amount of yeast extract were found to be the key factors affecting lactic acid production. Further tests on nutrients indicated that corn steep liquor could be substituted for yeast extract as a nitrogen source to achieve the same lactic acid yield. Fed-batch operation of the SSCF was beneficial in raising the concentration of lactic acid to a maximum value of 75.0 g/L.
Asunto(s)
Amoníaco/química , Celulasa/química , Residuos Industriales/prevención & control , Ácido Láctico/metabolismo , Lactobacillus/metabolismo , Zea mays/química , Zea mays/microbiología , Biodegradación Ambiental , Reactores Biológicos/microbiología , Biotransformación , Técnicas de Cultivo de Célula/métodos , Fermentación , Componentes Aéreos de las Plantas/metabolismo , Agua/químicaRESUMEN
A novel method of producing food-grade xylooligosaccharides from corn stover and corn cobs was investigated. The process starts with pretreatment of feedstock in aqueous ammonia, which results delignified and xylan-rich substrate. The pretreated substrates are subjected to enzymatic hydrolysis of xylan using endoxylanase for production of xylooligosaccharides. The conventional enzyme-based method involves extraction of xylan with a strong alkaline solution to form a liquid intermediate containing soluble xylan. This intermediate is heavily contaminated with various extraneous components. A costly purification step is therefore required before enzymatic hydrolysis. In the present method, xylan is obtained in solid form after pretreatment. Water-washing is all that is required for enzymatic hydrolysis of this material. The complex step of purifying soluble xylan from contaminant is essentially eliminated. Refining of xylooligosaccharides to food-grade is accomplished by charcoal adsorption followed by ethanol elution. Xylanlytic hydrolysis of the pretreated corn stover yielded glucan-rich residue that is easily digestible by cellulase enzyme. The digestibility of the residue reached 86% with enzyme loading of 10 filter paper units/g-glucan. As a feedstock for xylooligosaccharides production, corn cobs are superior to corn stover because of high xylan content and high packing density. The high packing density of corn cobs reduces water input and eventually raises the product concentration.
Asunto(s)
Amoníaco/química , Endo-1,4-beta Xilanasas/química , Oligosacáridos/síntesis química , Componentes Aéreos de las Plantas/química , Agua/química , Xilosa/síntesis química , Zea mays/química , Activación Enzimática , Manipulación de Alimentos/métodos , Concentración de Iones de Hidrógeno , Hidrólisis , Soluciones/química , TemperaturaRESUMEN
For the first time, a single source of cellulosic biomass was pretreated by leading technologies using identical analytical methods to provide comparative performance data. In particular, ammonia explosion, aqueous ammonia recycle, controlled pH, dilute acid, flowthrough, and lime approaches were applied to prepare corn stover for subsequent biological conversion to sugars through a Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI) among Auburn University, Dartmouth College, Michigan State University, the National Renewable Energy Laboratory, Purdue University, and Texas A&M University. An Agricultural and Industrial Advisory Board provided guidance to the project. Pretreatment conditions were selected based on the extensive experience of the team with each of the technologies, and the resulting fluid and solid streams were characterized using standard methods. The data were used to close material balances, and energy balances were estimated for all processes. The digestibilities of the solids by a controlled supply of cellulase enzyme and the fermentability of the liquids were also assessed and used to guide selection of optimum pretreatment conditions. Economic assessments were applied based on the performance data to estimate each pretreatment cost on a consistent basis. Through this approach, comparative data were developed on sugar recovery from hemicellulose and cellulose by the combined pretreatment and enzymatic hydrolysis operations when applied to corn stover. This paper introduces the project and summarizes the shared methods for papers reporting results of this research in this special edition of Bioresource Technology.
Asunto(s)
Biomasa , Celulosa/química , Celulosa/metabolismo , Compuestos de Calcio/química , Celulasa/metabolismo , Conservación de los Recursos Energéticos , Fermentación , Hidrólisis , Óxidos/química , Saccharomyces cerevisiae/metabolismo , Ácidos Sulfúricos/química , Agua , Zea mays , beta-Glucosidasa/metabolismoRESUMEN
Five pretreatment processes (dilute acid, hot water, ammonia fiber explosion (AFEX), ammonia recycle percolation (ARP), and lime) for the liberation of sugars from corn stover are compared on a consistent basis. Each pretreatment process model was embedded in a full bioethanol facility model so that systematic effects for variations in pretreatment were accounted in the overall process. Economic drivers influenced by pretreatment are yield of both five and six carbon sugars, solids concentration, enzyme loading and hemicellulase activity. All of the designs considered were projected to be capital intensive. Low cost pretreatment reactors in some pretreatment processes are often counterbalanced by higher costs associated with pretreatment catalyst recovery or higher costs for ethanol product recovery. The result is little differentiation between the projected economic performances of the pretreatment options. Additional process performance data, especially involving the identification of optimal enzyme blends for each pretreatment approach and conditioning requirements of hydrolyzates at process-relevant sugar concentrations resulting from each pretreatment may lead to greater differentiation in projected process economics.