RESUMEN
Mixed convection flow of two layers nanofluid in a vertical enclosure is studied. The channel consists of two regions. Region I is electrically conducting while Region II is electrically non-conducting. Region I is filled with base fluid water with copper oxides nanoparticles and Region II is filled with base fluid kerosene oil with iron oxides. The simultaneous effects of electro-magnetohydrodynamics and Grashof number are also taken into account. The governing flow problem consists of nonlinear coupled differential equations which is tackled using analytical technique. Analytical results have been obtained by the homotopy analysis method (HAM). The results for the leading parameters, such as the Hartmann numbers, Grashof numbers, ratio of viscosities, width ratio, volume fraction of nanoparticles, and the ratio of thermal conductivities for three different electric field scenarios under heat generation/absorption were examined. It is found that the effect of the negative electric load parameter assists the flow while the effect of the positive electric load parameter opposes the flow as compared to the case when the electric load parameter is zero. All outcomes for significant parameters on velocity and temperature are discussed graphically.
RESUMEN
The main theme of the present study is to analyze numerically the effects of the magnetic field on the hybrid nanofluid flow over a flat elastic surface. The effects of the thermal and velocity slips are also analyzed in view of the hybrid nanofluid flow. It is considered a combination of titanium oxide (TiO2) and copper oxide (CuO) nanoparticles that are suspended in the incompressible and electrically conducting fluid (water). The behavior of the Brownian motion of the nanoparticles and the thermophoretic forces are contemplated in the physical and mathematical formulations. Moreover, the impact of the Joule heating and viscous dissipation are also discussed using the energy equation. The mathematical modeling is simulated with the help of similarity variables. The resulting equations are solved using the Keller-Box method with a combination of finite difference schemes (FDSs). Hybrid nanofluids provide significant advantages over the usual heat transfer fluids. Therefore, the use of nanofluids is beneficial to improve the thermophysical properties of the working fluid. All of the results are discussed for the various physical parameters involved in governing the flow. From the graphical results, it is found that the hybrid nanoparticles improve the concentration, temperature, and velocity profiles, as well as the thickness of the relevant boundary layer. The conjunction of a magnetic field and the velocity slip, strongly opposes the fluid motion. The boundary layer thickness and concentration profile are significantly reduced with the higher levels of the Schmidt number.
RESUMEN
Nanoparticles play an essential role in biomedical applications. A most promising area in nanomedicine is drug targeting which is done with the aid of magnetized nanoparticles. In this study, the hemodynamics of hybrid nanofluid flow with gold and copper nanoparticles suspended in it is investigated. This research primarily focuses on magnetic drug delivery which is propagated through a tapered stenosed artery under three situations, including converging, diverging, and non-tapering arteries. To explore the rheological characteristics of blood, a Sutterby fluid, which is a non-Newtonian fluid, is postulated. The energy equation also incorporates the effects of the magnetic field and joule heating, as well as the viscous dissipation function. Lubrication theory provides a mathematical framework for model formulation. The hypothesized modeling is simplified to a set of nonlinear differential equations that are then solved using a perturbation method up to the second order of approximation. Graphs are used to describe the outcomes of different evolving parameters. The Sutterby fluid parameter opposes the flow negligibly, whereas the Hartmann number and thermal Grashof number strengthen the flow field. Copper nanoparticles (in the absence of gold nanoparticles) are observed to deplete the thermal profile substantially more than gold nanoparticles. Nevertheless, the thermal profile is enhanced by the presence of both nanoparticles (hybrid nanofluids). For greater values of the Sutterby fluid parameter, the wall shear stress has been observed to rise considerably, whereas the inverse is true for the Hartmann number and the thermal Grashof number. The present results have been improved to give significant information for biomedical scientists who are striving to study blood flow in stenosis situations, as well as for those who will find the knowledge valuable in the treatment of different diseases.
RESUMEN
A thermal analysis of Cu-CuO/ blood nanofluids flow in asymmetric microchannel propagating with wave velocity is presented in this study. For the blood, a micropolar fluid model is considered to investigate the microrotation effects of blood flow. Thermal radiation effects and the influence of nanoparticle shape, electric double layer thickness, and electromagnetic fields on the flow are studied. Three types of nanoparticles shapes namely cylinder, bricks and platelets are taken into account. Governing equations are solved under the approximations of long wavelength, low Reynolds number, and Debye-Hückel linearization. Numerical computations are performed for the axial pressure gradient, axial velocity, spin velocity and temperature distribution. The effects of various physical parameters on flow and thermal characteristics are computed and their physical interpretation is also discussed. The outcomes indicate that the axial velocity of Cu-CuO/blood nanoparticles strongly depends on applied electromagnetic field and microrotation. The model's finding will be applicable in designing the smart electromagnetic micro pumps for the hemodialysis and lungs-on-chip devices for the pumping of the blood.
Asunto(s)
Cobre/química , Campos Electromagnéticos , Microcirculación , Técnicas Analíticas Microfluídicas , Microvasos/fisiología , Modelos Cardiovasculares , Nanopartículas , Temperatura , Animales , Velocidad del Flujo Sanguíneo , Humanos , Hidrodinámica , Flujo Pulsátil , Flujo Sanguíneo Regional , Rotación , Factores de TiempoRESUMEN
The internal average energy loss caused by entropy generation for steady mixed convective Poiseuille flow of a nanofluid, suspended with titanium dioxide (TiO2) particles in water, and passed through a wavy channel, was investigated. The models of thermal conductivity and viscosity of titanium dioxide of 21 nm size particles with a volume concentration of temperature ranging from 15 °C to 35 °C were utilized. The characteristics of the working fluid were dependent on electro-magnetohydrodynamics (EMHD) and thermal radiation. The governing equations were first modified by taking long wavelength approximations, which were then solved by a homotopy technique, whereas for numerical computation, the software package BVPh 2.0 was utilized. The results for the leading parameters, such as the electric field, the volume fraction of nanoparticles and radiation parameters for three different temperatures scenarios were examined graphically. The minimum energy loss at the center of the wavy channel due to the increase in the electric field parameter was noted. However, a rise in entropy was observed due to the change in the pressure gradient from low to high.
RESUMEN
In this paper, an analytical study of internal energy losses for the non-Darcy Poiseuille flow of silver-water nanofluid due to entropy generation in porous media is investigated. Spherical-shaped silver (Ag) nanosize particles with volume fraction 0.3%, 0.6%, and 0.9% are utilized. Four illustrative models are considered: (i) heat transfer irreversibility (HTI), (ii) fluid friction irreversibility (FFI), (iii) Joule dissipation irreversibility (JDI), and (iv) non-Darcy porous media irreversibility (NDI). The governing equations of continuity, momentum, energy, and entropy generation are simplified by taking long wavelength approximations on the channel walls. The results represent highly nonlinear coupled ordinary differential equations that are solved analytically with the help of the homotopy analysis method. It is shown that for minimum and maximum averaged entropy generation, 0.3% by vol and 0.9% by vol of nanoparticles, respectively, are observed. Also, a rise in entropy is evident due to an increase in pressure gradient. The current analysis provides an adequate theoretical estimate for low-cost purification of drinking water by silver nanoparticles in an industrial process.