RESUMEN
This study aimed to assess the impact of prosthetic treatment on the quality of life of partially/completely edentulous patients through the Oral Health Impact Profile-14 (OHIP-14) scale. This pre-post observational study was conducted in the College of Dentistry, Imam Abdulrahman Bin Faisal University, Saudi Arabia, between November 2022 and September 2023. Eligible participants were those aged between 26 and 80, in need of prosthetic treatment, and able to complete the questionnaire voluntarily. The questionnaire presented to the patients had two sections; the first included demographic and dentures-related variables, and the second included the OHIP-14 questionnaire. Differences in overall OHIP-14 scores after treatment about demographic and prosthesis-related factors were assessed using the Mann-Whitney U test/Kruskal Wallis test with a significance level of 0.05. Out of 108 participants, 65 were males, and 43 were females with an average age of 52 years with different prosthetic treatments (13.9 % fixed prostheses, 43.5 % removable partial, and 42.6 % complete dentures). 59.3 % brushed their teeth twice or more daily, and only 36.1 % checked them regularly. Comparison between the OHIP-14 items before and after treatment revealed that subjects exhibited improvement in all the domains. OHIP-14 scores did not differ significantly in terms of age, gender, and education after treatment. OHIP-14 score was considerably higher for patients with medical conditions (P = 0.007) and among complete denture wearers compared to patients with fixed prostheses (P = 0.025). Prosthetic treatment positively impacts oral health-related quality of life (OHRQoL), which improved after treatment, particularly in the social domain. There was an association between patients' medical condition, prosthesis type, and OHIP-14 score.
RESUMEN
Background: Translucency and optical characteristics significantly affect the aesthetics of ceramic restorations. The introduction of new virgilite crystals to novel ceramic advanced lithium disilicate through a matrix firing process enhances the material's strength and aesthetic quality according to the manufacturer. Materials and Methods: Four types of CAD/CAM ceramics; lithium disilicate (LD), leucite reinforced (LR), advanced lithium disilicate (ALD), and zirconia-reinforced lithium silicate (ZLS) exposed to different staining solutions (tea, cola, coffee, and distilled water). Each ceramic type had 120 specimens, divided into subgroups based on thickness (0.5 mm, 1 mm, and 1.5 mm). Color changes (ΔE00) and translucency parameters (TP00) were measured after thermocycling, and spectrophotometry was employed to evaluate ΔE00 and TP00 after 1, 7, and 30 days of exposure to the staining solutions. Results: ZLS exhibited the lowest color stability, while lithium LD and ALD displayed the highest. Thickness significantly affected color stability, with 0.5 mm thickness showing the least change. The duration of exposure also impacted color changes, with 30 days causing the most significant shift. LD demonstrated the highest translucency. Coffee and tea induced more pronounced reductions in translucency and color stability compared to the control group. Conclusions: Material structure, thickness, staining solution, and exposure duration significantly influenced the color stability and translucency of CAD/CAM ceramics, with LD and ALD demonstrating superior color stability and LD exhibiting the highest translucency.
RESUMEN
INTRODUCTION: The use of digital dentistry is rapidly increasing in prosthodontics. However, most dental students are not familiar with applying digital technologies in dental clinics. Thus, the aim of the current study was to assess the perception of dental students at different educational years towards digital impressions in comparison to conventional impressions. MATERIALS AND METHODS: A cross-sectional questionnaire-based study was conducted on various educational years of dental students in the College of Dentistry, Imam Abdulrahman Bin Faisal University, between February and April 2023. The students had performed at least one intraoral scan (Trios 3shape) and another conventional polyether impression for phantom casts/patients. The questionnaire assessed students' perceptions of digital impressions using a 5-point scale ranging from strongly agree to strongly disagree. Mann-Whitney U and Kruskal-Wallis tests were used to compare students' perceptions of digital impressions according to gender and educational year, respectively. RESULTS: The study included 122 students. About 55% were females with a mean (SD) age = 22.51 (3.36). Most students thought that digital impressions are faster and more user-friendly compared to conventional impressions. Significantly more female students thought that the handpiece was too big for intraoral use (p = 0.04) and that the process of the software was time-consuming and complicated. In general, higher educational year students were more satisfied with the digital impressions than lower educational year students. CONCLUSIONS: Digital impressions were perceived by most students as being faster and easier than conventional ones. However, male students and those with higher educational years showed better perception of digital impression.
RESUMEN
BACKGROUND: The COVID-19 pandemic had socioeconomic effects in Africa. This study assessed the social and economic determinants of healthcare utilization during the first wave of COVID-19 among adults in Ghana. METHODS: Information about individuals residing in Ghana was derived from a survey conducted across multiple countries, aiming to evaluate the impact of the COVID-19 pandemic on the mental health and overall well-being of adults aged 18 and above. The dependent variable for the study was healthcare utilization (categorized as low or high). The independent variables were economic (such as financial loss, job loss, diminished wages, investment/retirement setbacks, and non-refunded travel cancellations) and social (including food scarcity, loss of financial support sources, housing instability, challenges affording food, clothing, shelter, electricity, utilities, and increased caregiving responsibilities for partners) determinants of health. A multinomial logistic regression was conducted to identify factors associated with healthcare utilization after adjusting for confounders (age, gender, access to medical insurance, COVID-19 status, educational background, employment, and marital status of the participants). RESULTS: The analysis included 364 responses. Individuals who encountered a loss of financial support (AOR: 9.58; 95% CI: 3.44-26.73; p < 0.001), a decrease or loss of wages (AOR: 7.44, 95% CI: 3.05-18.16, p < 0.001), experienced investment or retirement setbacks (AOR: 10.69, 95% CI: 2.60-43.88, p = 0.001), and expressed concerns about potential food shortages (AOR: 6.85, 95% CI: 2.49-18.84, p < 0.001) exhibited significantly higher odds of low healthcare utilization during the initial phase of the pandemic. Contrastingly, participants facing challenges in paying for basic needs demonstrated lower odds of low healthcare utilization compared to those who found it easy to cover basic expenses (AOR: 0.19, 95% CI: 0.06-0.67, p = 0.001). CONCLUSION: Economic and social factors were associated with low healthcare utilization in Ghana during the first wave of the pandemic. Investment or retirement loss and financial support loss during the pandemic had the largest effect on healthcare utilization. Further research is needed to understand the connection between concerns about food shortages, welfare losses during pandemics and healthcare utilization during pandemics in Ghana.
Asunto(s)
COVID-19 , Pandemias , Adulto , Humanos , Ghana/epidemiología , Estudios Transversales , Factores Socioeconómicos , Determinantes Sociales de la Salud , COVID-19/epidemiología , Aceptación de la Atención de SaludRESUMEN
This study assessed the association between sociodemographic factors and post-traumatic stress symptoms (PTSS) among 18-24-year-olds during the first wave of the COVID-19 pandemic. This was a secondary analysis of data from 4508 individuals collected through an online survey conducted between June and January 2021. PTSS was measured as a dependent variable using the checklist for post-traumatic stress disorder in civilians. Age, birth sex, sexual, level of education, access to emotional and social support, and emotional distress were the independent variables. A multivariate logistic regression analysis was conducted to determine the associations between the dependent and independent variables while controlling for the country related confounding variables. Females (AOR:2.023), sexual minority individuals (AOR:1.868), those who did not disclose their sexual identify (AOR:1.476), those with poor access to emotional and social support (AOR:4.699) and individuals with no formal education (AOR:13.908), and only primary level education (AOR:4.521) had higher odds of PTSS. The study highlights the multifaceted nature of PTSS during the pandemic and suggests the importance of promoting access of young people, especially females, sexual minority individuals and those with low educational status, to emotional/social support to mitigate the probability of PTSS, especially among sexual minority individuals.
Asunto(s)
COVID-19 , Trastornos por Estrés Postraumático , Femenino , Humanos , Adolescente , Trastornos por Estrés Postraumático/epidemiología , Trastornos por Estrés Postraumático/etiología , Trastornos por Estrés Postraumático/diagnóstico , COVID-19/epidemiología , Pandemias , Apoyo Social , Factores EconómicosRESUMEN
OBJECTIVE: The aim of this study was to evaluate the surface roughness, contact angle, and adhesion of Candida albicans to computer-aided designing/computer-aided manufacturing (CAD/CAM) and heat-polymerized (HP) denture base materials. MATERIALS AND METHODS: Specimens were allocated to six groups based on the composition of studied denture base materials, HP acrylic resin, milled resins (AvaDent and IvoCad), and 3D-printed resins (ASIGA, FormLabs, and NextDent). Ten specimens per group were used for each test (n = 10/test). Surface roughness and contact angles were analyzed using profilometer and goniometer, respectively. Adhesion of C. albicans was counted using colony-forming unit (CFU/mL). Means and standard deviations were calculated, and then one-way analysis of variance (ANOVA), followed by Tukey's post hoc test. Correlation of Candida adhesion and surface parameters was determined by using Pearson's correlation analysis. RESULTS: No statistically significant difference was noted in surface roughness between HP, milled, and 3D-printed denture base resins except NextDent, which showed significantly higher roughness in comparison to all other resins (p = 0.001). In terms of contact angle, milled resins had the lowest value, followed by HP, ASIGA, and FormLabs, whereas NextDent showed the highest contact angle (p = 0.001). C. albicans adhesion showed no significant difference between all denture base resins. A positive and significant correlation was found between C. albicans adhesion and contact angle (p = 0.003), while no correlation was reported between C. albicans adhesion and surface roughness (p = 0.523). CONCLUSION: Adhesion of C. albicans was similar in all tested specimens. Surface roughness showed no significant difference between all groups except NextDent, which had the highest value. Milled denture base resins had the lowest contact angle among all groups.
RESUMEN
Objective: The study aimed to assess the association between adherence to COVID-19 preventive measures and access to media information related to COVID-19. Methods: A multi-country, cross-sectional study using an online survey was conducted from June to December 2020. The sample included 1,457 participants from Argentina, Brazil, Chile, and Mexico. The outcome variable was self-reported adherence to preventive measures (handwashing, social distancing, self-isolation, use of face masks, and working from home). The explanatory variable was self-report of following media information related to COVID-19 (watching or reading the news, following social media coverage). Multivariable logistic regression analyses were conducted to determine the associations. Results: Following information on social media was positively associated with higher odds of practicing social distancing (AOR=5.39; 95%CI: 3.93-7.30), self-isolation (AOR=1.44; 95%CI: 1.08-1.92), use of face masks (AOR=16.84; 95%CI: 10.03-28.27), handwashing (AOR=6.95; CI 95%: 4.98-9.71), and working from home (AOR=1.85; 95% CI: 1.43-2.41). Differences in the use of social media for COVID-19 information were observed among the four countries. Conclusion: Following social media was positively associated with adherence to COVID-19 preventive measures in Latin America. Social media may be effectively used for COVID-19 behaviour modification in Latin America.
RESUMEN
STATEMENT OF PROBLEM: Social media platforms such as Instagram have recently become popular among dentists, dental interest groups, and patients for sharing dental-related information. However, a study that dissects and analyzes implant-related posts on Instagram is lacking. PURPOSE: The purpose of this study was to analyze the type of implant-related information on Instagram by highlighting the characteristics of the top-performing posts and assessing their usefulness as educational content. MATERIAL AND METHODS: A list of 12 implantology-related hashtags on Instagram was searched, and, for each hashtag, data were acquired for the "Top 12 posts" listed by the Instagram search algorithm. The contents of each post, including the number of likes and followers, content type, poster role, post content, theme and type, account type, and accuracy of claims, were collected. Descriptive statistics were calculated, and comparisons were performed by using the Mann-Whitney U and Kruskal Wallis tests (α=.05). RESULTS: The search identified 4 541 867 implant-related posts. The 2 most used hashtags were #dentalimplants (n=1 478 770) and #implant (n=1 303 575). Authorship and content analysis showed that dentists, including specialists, posted about 42% of the posts. More than half of the posts were in the form of pictures (62.5%), self-promotional (77.8%), and used for marketing purposes (61.8%). Most posts were not supported by evidence, and only 27.8% shared clinical facts. However, compared with self-promotional posts, most educational posts shared clinical facts with more likes, views, and followers (P<.001). CONCLUSIONS: More than 4 million posts related to implant dentistry were identified on Instagram. Dental interest groups and patients authored most posts, with less contribution from dentists and specialists. Social media awareness among dentists may enhance the number of educational posts and provide a novel platform for networking and communication.
RESUMEN
PURPOSE: To assess the influence of denture brushing on the surface roughness, hardness, and color stability of conventional, thermoformed, and CAD-CAM denture base materials. MATERIALS AND METHODS: Seven different denture base materials were included in this study; conventional heat-polymerized acrylic resin (PMMA) served as control, polyamide, acetal, two categories of milled acrylic discs (AvaDent and IvoCad), and two categories of 3D-printed resins (NextDent and FormLabs). The specimens were constructed according to manufacturers' instructions and then subjected to simulated brushing (20,000 cycles). According to the brushing method, the specimens were split into three groups, no brushing, brushing with water, and brushing with toothpaste. Surface roughness, hardness, and color change were evaluated before and after brushing. Collected data were analyzed using ANOVA, and post-hoc Tukey's tests (α = 0.05). RESULTS: A significant difference was noted between the surface roughness of the tested materials before and after denture brushing (p < 0.05), and milled resin showed the least Ra values. Denture brushing with water significantly increased the Ra of PMMA (p = 0.004) and IvoCad (p = 0.032), while brushing using toothpaste did not show a significant increase. The brushing protocols did not alter the hardness of tested materials except that of PMMA (p = 0.001). The color stability of the tested materials showed comparable results with both brushing protocols. CONCLUSION: The tested properties showed variations between the types of denture base resins. Hardness and color stability of CAD-CAM and thermoformed denture base resins were not altered by denture brushing and showed comparable results with both brushing methods. Surface roughness was the only property that showed alteration after denture brushing.
RESUMEN
Background: Child neglect is a public health, human rights, and social problem, with potentially devastating and costly consequences. The aim of this study was to: (1) summarize the oral health profile of children across the globe; (2) provide a brief overview of legal instruments that can offer children protection from dental neglect; and (3) discuss the effectiveness of these legal instruments. Methods: We summarized and highlighted the caries profile and status of implementation of legislation on child dental neglect for 26 countries representing the World Health Organization regions: five countries in Africa (Nigeria, South Africa, Sudan, Tanzania, Zimbabwe), eight in the Americas (Argentina, Brazil, Canada, Chile, Mexico, Peru, Unites States of America, Uruguay), six in the Eastern Mediterranean (Egypt, Iran, Libya, Jordan, Qatar, Saudi Arabia), four in Europe (Italy, Latvia, Serbia, United Kingdom), two in South-East Asia (India and Indonesia) and one country (China) with its special administrative region (Hong Kong) in the Western Pacific. Results: Twenty-five of the 26 countries have legal instruments to address child neglect. Only two (8.0%) of these 25 countries had specific legal instruments on child dental neglect. Although child neglect laws can be interpreted to establish a case of child dental neglect, the latter may be difficult to establish in countries where governments have not addressed barriers that limit children's access to oral healthcare. Where there are specific legal instruments to address child dental neglect, a supportive social ecosystem has also been built to facilitate children's access to oral healthcare. A supportive legal environment, however, does not seem to confer extra protection against risks for untreated dental caries. Conclusions: The institution of specific country-level legislation on child dental neglect may not significantly reduce the national prevalence of untreated caries in children. It, however, increases the prospect for building a social ecosystem that may reduce the risk of untreated caries at the individual level. Social ecosystems to mitigate child dental neglect can be built when there is specific legislation against child dental neglect. It may be more effective to combine public health and human rights-based approaches, inclusive of an efficient criminal justice system to deal with child dental neglect.
RESUMEN
BACKGROUND: The aims of this study were to assess: 1) the associations among sexual activity, alcohol consumption, use of other psychoactive substances and mental health during the COVID-19 pandemic; and 2) the associations between COVID-19 preventive measures, alcohol consumption and use of psychoactive substances. METHODS: This was a secondary analysis of data collected from adults in Nigeria between July and December 2020. The variables extracted included change in sexual activity, alcohol consumption and use of other psychoactive substances, COVID-19 preventive behaviors (wearing face masks, washing hands, physical distancing), anxiety, depression, post-traumatic stress disorder (PTSD) and sociodemographic variables (age, sex, education, HIV status, employment status). Multivariable logistic regressions were conducted. A model was run to regress depression, anxiety, PTSD, increased alcohol consumption, and increased use of other psychoactive substances, on increased sexual activity. In separate models, anxiety, depression, and PTSD were regressed on increased alcohol consumption and on increased use of other psychoactive substances. Finally, three models were constructed to determine the associations between increased alcohol consumption and increased use of other psychoactive substances on three separate COVID-19 preventive behaviors. All models were adjusted for sociodemographic variables. RESULTS: Increased alcohol consumption (AOR:2.19) and increased use of other psychoactive substances (AOR: 3.71) were significantly associated with higher odds of increased sexual activity. Depression was associated with significantly higher odds of increased alcohol consumption (AOR:1.71) and increased use of other psychoactive substances (AOR:3.21). Increased alcohol consumption was associated with significantly lower odds of physical distancing (AOR:0.59). CONCLUSION: There was a complex inter-relationship between mental health, sexual health, increased use of psychoactive substances. The consumption of alcohol also affected compliance with physical distancing. Further studies are needed to understand the observed relationships.
Asunto(s)
Consumo de Bebidas Alcohólicas , COVID-19 , Trastornos Mentales , Psicotrópicos , Conducta Sexual , Adulto , Humanos , Consumo de Bebidas Alcohólicas/epidemiología , Ansiedad , COVID-19/epidemiología , COVID-19/prevención & control , COVID-19/psicología , Depresión , Trastornos Mentales/tratamiento farmacológico , Trastornos Mentales/epidemiología , Salud Mental , Nigeria/epidemiología , Pandemias , Distanciamiento Físico , Psicotrópicos/uso terapéutico , Trastornos por Estrés Postraumático , Estudios TransversalesRESUMEN
BACKGROUND: Health behaviours are influenced by individual characteristics including age, gender, education and economic level. This study aimed to assess the associations between individual-level determinants and adherence to COVID-19 preventive measures. METHODS: We performed secondary analyses of international data collected using an online survey during the first wave of the COVID-19 pandemic between June and December 2020. The dependent variables were self-reported adherence to COVID-19 preventive measures (wearing of face masks, frequent washing/sanitizing of hands, physical distancing, working remotely). The independent variables were age, sex at birth (female vs male), having a chronic disease related elevated risk for severe COVID-19 (none/little, might be at increased risk, at increased risk), educational level completed (no formal education, primary, secondary vs college/university) and employment status (retiree, students, not employed vs employed). Four multivariate logistic regression analyses were conducted to determine the associations between the dependent variables and independent variables. Interaction terms with country-income level were tested in regressions to explore its moderating effect. RESULTS: Out of 16,866 respondents, 12,634 (74.9%) wore masks or face coverings, 12,336 (73.1%) washed or sanitized their hands frequently, 11,464 (68.0%) reported adherence to physical distancing and 5,646 (33.5%) worked remotely. In adjusted analyses, increased age, college/university education, employment, and having risks for severe COVID-19 were associated with significantly higher odds of adhering to COVID-19 preventive measures. Retirees and students had lower odds of adhering to COVID-19 prevention measures than employed individuals. Males had significantly lower odds of wearing face masks (AOR: 0.901), frequent washing/sanitizing hands (AOR: 0.774) and working remotely (AOR: 0.875) compared to females. Country-income level generally moderated the above relationships such that the associations disappeared in lower income countries. CONCLUSION: The study findings suggest that the individual socio-demographic factors-age, sex, employment status, education status and having a chronic disease - influence adherence to COVID-19 preventive measures. Findings further reiterate the need for health education and health promotion campaigns on preventive health measures to focus on subpopulations, such as younger males, students and retirees, that require targeted or unique messaging.
Asunto(s)
COVID-19 , Recién Nacido , Humanos , Femenino , Masculino , Pandemias , Escolaridad , Autoinforme , DemografíaRESUMEN
Occlusal rest provides support for removable partial dentures (RPD). Rest seats are ideally prepared in enamel, but the abutment teeth might be restored or need restorations. This study compared the fracture strength of abutments restored with composite to amalgam restorations after rest seat preparation. Disto-occlusal cavities were prepared in 30 extracted human maxillary premolars. The specimens were allocated in three groups (n = 10) based on the type of restoration. All the specimens were exposed to thermomechanical aging followed by cycling loading. Fracture strength was tested using a universal testing machine, and then, the fracture mode was recorded. The data were analyzed using Kruskal-Wallis test with a significance level set at 0.05. The fracture mode was recorded as catastrophic or non-catastrophic. The fracture strength between all tested groups showed no significant difference. The highest and lowest fracture strength were recorded on amalgam and Tetric N-Ceram groups, respectively. Composite Tetric N-Ceram showed equal distribution of fracture sites on the restorative materials and teeth, it also displayed the highest number of non-catastrophic fractures unlike other groups where the fracture occurred more within the restorations. The fracture strength of composite was comparable to that of amalgam restorations with prepared rest seats.
RESUMEN
Aim: The COVID-19 pandemic has accelerated teledentistry research with great interest reflected in the increasing number of publications. In many countries, teledentistry programs were established although not much is known about the extent of incorporating teledentistry into practice and healthcare systems. This study aimed to report on policies and strategies related to teledentistry practice as well as barriers and facilitators for this implementation in 19 countries. Methods: Data were presented per country about information and communication technology (ICT) infrastructure, income level, policies for health information system (HIS), eHealth and telemedicine. Researchers were selected based on their previous publications in teledentistry and were invited to report on the situation in their respective countries including Bosnia and Herzegovina, Canada, Chile, China, Egypt, Finland, France, Hong Kong SAR, Iran, Italy, Libya, Mexico, New Zealand, Nigeria, Qatar, Saudi Arabia, South Africa, United Kingdom, Zimbabwe. Results: Ten (52.6%) countries were high income, 11 (57.9%) had eHealth policies, 7 (36.8%) had HIS policies and 5 (26.3%) had telehealth policies. Six (31.6%) countries had policies or strategies for teledentistry and no teledentistry programs were reported in two countries. Teledentistry programs were incorporated into the healthcare systems at national (n = 5), intermediate (provincial) (n = 4) and local (n = 8) levels. These programs were established in three countries, piloted in 5 countries and informal in 9 countries. Conclusion: Despite the growth in teledentistry research during the COVID-19 pandemic, the use of teledentistry in daily clinical practice is still limited in most countries. Few countries have instituted teledentistry programs at national level. Laws, funding schemes and training are needed to support the incorporation of teledentistry into healthcare systems to institutionalize the practice of teledentistry. Mapping teledentistry practices in other countries and extending services to under-covered populations increases the benefit of teledentistry.
RESUMEN
BACKGROUND: COVID-19 lockdown resulted in the closure of schools with associated problems. The aim of this study was to determine the associations between depression, fear of contracting COVID-19 infection and the use of self-care measures by college students during the first wave of the COVID-19 pandemic. METHODS: This was a cross-sectional study that collected data from undergraduate and postgraduate college students 18 years and older from 152 countries between June and December 2020. Study participants were recruited through crowdsourcing using various social media platforms including Facebook, Twitter, and Instagram, WhatsApp groups and emails to participants in the collaborators' networks. The dependent variables were fear of contracting COVID-19 and depression while the independent variable was students' self-care measures. Multivariable logistic regression models were conducted to assess the associations between the dependent and independent variables. RESULTS: Of the 2840 respondents, 1305 (46.0%) had fears of contracting COVID-19 and 599 (21.1%) reported depression. The most common self-care measures were phone calls with friends/family (60.1%) and video chat (52.8%). Learning a new skill was significantly associated with higher odds of fear of contracting COVID-19 (AOR = 1.669) and lower odds of having depression (AOR = 0.684). Talking to friends/family through video chat (AOR = 0.809) was significantly associated with lower odds of feeling depressed while spending time with pets (AOR = 1.470) and taking breaks from the news/social media (AOR = 1.242) were significantly associated with higher odds of feeling depressed. Students from lower middle-income countries (AOR = 0.330) had significantly lower odds of feeling depressed than students from low-income countries. CONCLUSION: Self-care strategies involving social interactions were associated with less depression. Coping strategies with more cognitive demands may significantly reduce the risk of fear of COVID-19. Special attention needs to be given to students in low-income countries who have higher odds of depression during the pandemic than students from other countries.
Asunto(s)
COVID-19 , Pandemias , Humanos , Estudios Transversales , Depresión/epidemiología , Autocuidado , COVID-19/epidemiología , Control de Enfermedades Transmisibles , Miedo , EstudiantesRESUMEN
BACKGROUND: This study investigated the associations between COVID-19 related stigma and post-traumatic stress symptoms (PTSS); and the associations between PTSS and COVID-19 related stigma, HIV status, COVID-19 status and key HIV population status. METHODS: This was a secondary analysis of data of 12,355 study participants generated through an online survey that recruited adults from 152 countries between July and December 2020. The dependent variables were COVID-19-related stigma and PTSS. The independent variables were HIV status (positive/negative), transaction sex (yes/no), use of psychoactive drugs (yes/no), and vulnerability status (transaction sex workers, people who use psychoactive drugs, living with HIV, and COVID-19 status). The confounding variables were age, sex at birth (male/female), level of education, sexual minority individuals (yes/no) and country income level. Multivariable logistic regression analyses were conducted to determine associations between the dependent and independent variables after adjusting for confounders. RESULTS: There were 835 (6.8%) participants who experienced COVID-19 related stigma during the pandemic and 3,824 (31.0%) participants reported PTSS. Respondents who were living with HIV (AOR: 1.979; 95%CI: 1.522-2.573), tested positive for COVID-19 (AOR: 3.369; 95%CI: 2.692-4.217), engaged in transactional sex (AOR: 1.428; 95%CI: 1.060-1.922) and used psychoactive drugs (AOR: 1.364; 95%CI: 1.053-1.767) had significantly higher odds of experiencing COVID-19 related stigma. Individuals with vulnerability status (AOR:4.610; 95%CI: 1.590-13.368) and who experienced COVID-19 related stigma (AOR: 2.218; 95%CI: 1.920-2.561) had significantly higher odds of PTSS. CONCLUSION: Individuals with vulnerability status may be at increased risk for COVID-19 related stigma. Key and vulnerable populations who were living with HIV and who experienced stigma may be at a higher risk of experiencing PTSS. Populations at risk for PTSS should be routinely screened and provided adequate support when they contract COVID-19 to reduce the risk for poor mental health during COVID-19 outbreaks and during future health crisis with similar magnitude as the COVID-19 pandemic.
Asunto(s)
COVID-19 , Infecciones por VIH , Trastornos por Estrés Postraumático , Adulto , Recién Nacido , Humanos , Masculino , Femenino , Homosexualidad Masculina , Pandemias , Trastornos por Estrés Postraumático/epidemiología , COVID-19/epidemiología , Infecciones por VIH/epidemiología , Infecciones por VIH/psicología , PercepciónRESUMEN
BACKGROUND: Enhancement of students' knowledge is essential in improving their clinical skills and performance. Thus, the curriculum should be prepared to achieve a better outcome. The current study aimed to determine the dental students' and interns' basic knowledge towards dental luting cements and their application in dental practice to improve the theoretical and clinical training sections. MATERIALS AND METHODS: A cross-sectional study was conducted among dental students and interns at three Colleges of Dentistry in the Kingdom of Saudi Arabia between September 2019-June 2020. An online questionnaire was used which included demographic data, questions about luting cement usage, cementation techniques, and commonly used cements in dental clinics. Descriptive analysis and chi-square test were used to show the association between level of dental education and the use of dental cements using SPSS software. The significance level was set at 5%. RESULTS: The total respondents were 626 dental students/interns of whom 78.8% were undergraduate dental students. Participants who reported undergraduate studies as the source of information were 79.7%. The type of restoration was the main factor in luting cement selection (62.6%). Concerning the isolation technique in cementing laminate veneers, 49.7% used dri-angles, cotton rolls and saliva ejectors. Dual-cure resin cement was the most common cement used in all the mentioned restorations except in pressed porcelain laminate veneers and cement-retained implant-supported restorations. CONCLUSIONS: Students' knowledge and practice in managing dental implants and porcelain laminate veneers need to be improved. The selection of a luting agent for a given restoration by students and interns was based on the basic knowledge, available cement, and the type of restoration. Awareness towards the management of short prepared teeth and custom-made cast posts and cores is also limited.
Asunto(s)
Cementos Dentales , Porcelana Dental , Humanos , Prostodoncia , Estudios Transversales , Arabia Saudita , Estudiantes de Odontología , Cementos de Resina , Cementos de Ionómero Vítreo , Ensayo de MaterialesRESUMEN
BACKGROUND: Adherence to antiretroviral therapy and COVID-19 preventive behaviours among people living with HIV during the pandemic has received little attention in the literature. To address this gap in knowledge, the present study assessed the associations between viral load, adherence to antiretroviral therapy and the use of COVID-19 prevention strategies during the first wave of the COVID-19 pandemic. This was a secondary analysis of data generated through an online survey recruiting participants from 152 countries. Complete data from 680 respondents living with HIV were extracted for this analysis. RESULTS: The findings suggest that detectable viral load was associated with lower odds of wearing facemasks (AOR: 0.44; 95% CI:0.28-0.69; p < 0.01) and washing hands as often as recommended (AOR: 0.64; 95% CI: 0.42-0.97; p = 0.03). Also, adherence to the use of antiretroviral drugs was associated with lower odds of working remotely (AOR: 0.60; 95% CI: 0.38-0.94; p = 0.02). We found a complex relationship between HIV positive status biological parameters and adherence to COVID-19 preventive measures that may be partly explained by risk-taking behaviours. Further studies are needed to understand the reasons for the study findings.
Asunto(s)
COVID-19 , Infecciones por VIH , Humanos , Pandemias/prevención & control , COVID-19/epidemiología , Carga Viral , Infecciones por VIH/tratamiento farmacológico , Infecciones por VIH/epidemiología , Infecciones por VIH/prevención & control , Antirretrovirales/uso terapéuticoRESUMEN
This study evaluated the effect of ultrasonic and manual scaling using different scaler materials on the surface topography of computer-aided designing and computer-aided manufacturing (CAD/CAM) ceramic compositions. After scaling with manual and ultrasonic scalers, the surface properties of four classes of CAD/CAM ceramic discs: lithium disilicate (IPE), leucite-reinforced (IPS), advanced lithium disilicate (CT), and zirconia-reinforced lithium silicate (CD) of 1.5 mm thickness were evaluated. Surface roughness was measured before and after treatment, and scanning electron microscopy was used to evaluate the surface topography following the performed scaling procedures. Two-way ANOVA was conducted to assess the association of the ceramic material and scaling method with the surface roughness. There was a significant difference in the surface roughness between the ceramic materials subjected to different scaling methods (p < 0.001). Post-hoc analyses revealed significant differences between all groups except for IPE and IPS where no significant differences were detected between them. CD showed the highest surface roughness values, while CT showed the lowest surface roughness values for the control specimens and after exposure to different scaling methods. Moreover, the specimens subjected to ultrasonic scaling displayed the highest roughness values, while the least surface roughness was noted with the plastic scaling method.