RESUMEN
Complexes of general formula [(TPA)Fe(R-Cat)]X.nS were synthesised with different catecholate derivatives and anions (TPA = tris(2-pyridylmethyl)amine, R-Cat2- = 4,5-(NO2)2-Cat2- denoted DNC(2-); 3,4,5,6-Cl4-Cat2- denoted TCC2-; 3-OMe-Cat(2-); 4-Me-Cat(2-) and X = BPh4-; NO3-; PF6-; ClO4-; S = solvent molecule). Their magnetic behaviours in the solid state show a general feature along the series, viz., the occurrence of a thermally-induced spin crossover process. The transition curves are continuous with transition temperatures ranging from ca. 84 to 257 K. The crystal structures of [(TPA)Fe(DNC)]X (X = PF6-; BPh4-) and [(TPA)Fe(TCC)]X.nS (X = PF6-; NO3- and n= 1, S = H2O; ClO4- and n= 1, S = H2O; BPh4- and n= 1, S = C3H6O) were solved at 100 (or 123 K) and 293 K. For those two systems, the characteristics of the [FeN(4)O(2)] coordination core and those of the dioxolene ligands appear to be consistent with a prevailing Fe(III)-catecholate formulation. This feature is in contrast with the large quantum mixing between Fe(III)-catecholate and Fe(II)-semiquinonate forms recently observed with the more electron donating simple catecholate dianion. The thermal spin crossover process is accompanied by significant changes of the molecular structures as shown by the average variation of the metal-ligand bond distances which can be extrapolated for a complete spin conversion from ca. 0.123 to 0.156 A. The different space groups were retained in the low- and high-temperature phases.
Asunto(s)
Catecoles/química , Compuestos Férricos/química , Magnetismo , Cristalografía por Rayos X , Ligandos , Modelos Moleculares , Espectroscopía de Mossbauer , Temperatura , Agua/químicaRESUMEN
The catalytic CVD synthesis, using propyne as carbon precursor and Fe(NO3)3 as catalyst precursor inside porous alumina, gives carbon nanotube (CNT) bags in a well-arranged two-dimensional order. The tubes have the morphology of bags or fibers, since they are completely filled with smaller helicoidal CNTs. This morphology has so far not been reported for CNTs. Owing to the dense filling of the outer mother CNTs with small helicoidal CNTs, the resulting CNT fibers appear to be stiff and show no sign of inflation, as sometimes observed with hollow CNTs. The fiber morphology was observed by raster electron microscopy (REM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The carbon material is graphitic as deduced from spectroscopic studies (X-ray diffraction, Raman and electron energy-loss spectroscopy (EELS)). From Mössbauer studies, the presence of two different oxidation states (Fe0 and FeIII) of the catalyst is proven. Geometric structuring of the template by two different methods has been studied. Inkjet catalyst printing shows that the tubes can be arranged in defined areas by a simple and easily applied technique. Laser-structuring creates grooves of nanotube fibers embedded in the alumina host. This allows the formation of defined architectures in the microm range. Results on hydrogen absorption and field emission properties of the CNT fibers are reported.
RESUMEN
Bis(toluene)iron 9 reacts with Lappert's stannylene [Sn[CH(SiMe3)2]2] (4) to form the paramagnetic bis-stannylene complex [[(eta6-toluene)Fe-Sn-[CH(SiMe3)2]2]2] (10). Compound 10 reacts with H2O to form the hydroxo hydrido complex [(eta6-C7H8)(mu-OH)(H)-Fe-[Sn[CH(SiMe3)2]2]2] (12) in high yield; its solid-state structure has been elucidated by X-ray and neutron diffraction analysis. In agreement with the 1H NMR results, 12 contains a hydridic ligand whose exact coordination geometry could be determined by neutron diffraction. The 1H and 119Sn NMR analysis of 12 suggested a multicenter Sn/Sn/H/Fe bonding interaction in solution, based on significantly large values of J(Sn,H,Fe) = 640+/-30 Hz and J(119Sn,119Sn) = 4340+/-100 Hz. In solution, complex 12 exists as two diastereomers in a ratio of about 2:1. Neutron diffraction analysis has characterized 12 as a classical metal hydride complex with very little Sn...H interaction and a typical Fe-H single bond (1.575(8) A). This conclusion is based on the fact that the values of the Sn...H contact distances (2.482(9) and 2.499(9) A) are not consistent with strong Fe-H...Sn interactions. This finding is discussed in relation to other compounds containing M-H...Sn units with and without strong three-center interactions. The neutron diffraction analysis of 12 represents the first determination of a Sn-H atomic distance employing this analytical technique. The cobalt analogues [(eta5-Cp)(mu-OH)(H)Co-[Sn[CH(SiMe3)2]2]2] (15) and [(eta5-Cp)(OD)(D)Co-[Sn[CH-(SiMe3)2]2]2] [D2]15, which are isolobal with 12, were prepared by the reaction of [(eta5-Cp)Co-Sn[CH(SiMe3)2]2] (14) with H2O and D2O, respectively. The magnitude of J(Sn,H) (539 Hz) in 15 is in the same range as that found for 12. The molecular structure of 15 has been determined by X-ray diffraction which reveals it to be isostructural with 12. The coordination geometries of the Co(Fe)-Sn1-O-Sn2 arrangements in 12 and 15 are fully planar within experimental error. Compounds 10 and 15 are rare examples of fully characterized complexes obtained as primary products from water activation reactions.
RESUMEN
The pi-(arene)bis(stannylene) complex bis(bis(2-tert-butyl-4,5,6-trimethylphenyl)SnFe(eta6-toluene) (Sn-Fe-Sn, 15) is accessible in high yields by a metal-atom-mediated synthesis between iron atoms, toluene, and the stannylene [bis(2-tert-butyl-4,5,6-trimethylphenyl)Sn](3). Complex 15 has a half-sandwich structure with short Fe -Sn bonds (2.432(1) A) and a trigonal-planar coordination at both the Fe and Sn atoms. The distance between the two Sn centers is 3.56 A. Complex 15 is stable under ambient conditions and displays a pi-arene lability, so far rarely observed for (arene)iron complexes; this leads to an irreversible substitution of the arene and formation of fivefold-coordinated zerovalent iron complexes. The pi-arene lability of the title compound is a result of the Fe-Sn bonding situation, which can be interpreted, on the basis of an extended Huckel molecular orbital calculation, as being solely a donation of the 5sigma lone-pair of Sn into empty or half-filled acceptor d orbitals on Fe. As the calculations reveal, there is little backbonding from the iron to the tin, and the strong sigma donation leads to an increased occupation of the pi-antibonding orbitals of the eta6-arene, which are mainly responsible for the experimentally observed arene lability. Fe and Sn Mossbauer spectra support the polar character of Sn(sigma+)-->Fe(sigma-) with strong sigma donation from tin to iron, but significantly low iron-to-tin pi backdonation.
RESUMEN
A new series of hybrid organometallic - inorganic layered magnets with the formula [Z(III)Cp*2][M(II)M(III)(ox)3] (Z(III) = Co, Fe; M(III) = Cr, Fe; M(II) = Mn, Fe, Co, Cu, Zn; ox = oxalate; Cp* = pentamethylcyclopentadienyl) has been prepared. All of these compounds are isostructural and crystallize in the monoclinic space group C2/m, as found by X-ray structure analysis. Their structure consists of an eclipsed stacking of the bimetallic oxalate-based extended layers separated by layers of organometallic cations. These salts show spontaneous magnetization below To, which corresponds to the presence of ferro-, ferri-, or canted antiferromagnetism. Compounds in which the paramagnetic deca-methylferrocenium is used instead of the diamagnetic decamethylcobaltocenium are good examples of chemically constructed magnetic multilayers with alternating ferromagnetic and paramagnetic layers. The physical properties of this series have been thoroughly studied by means of magnetic measurements and ESR and Mossbauer spectroscopy. We have found that the two layers are electronically quasiindependent. As a consequence, the bulk properties of these magnets have not been significantly affected by the insertion of a paramagnetic layer of S = 1/2 spins in between the extended layers. In fact, the critical temperatures remain unchanged even when comparing [MCp*2]+ derivatives with [XR4]+ compounds (X = N, P; R = Ph, nPr, nBu). Nevertheless, the presence of the paramagnetic layer has been shown to have some influence on the hysteresis loops of these compounds. In the same context, the spin polarization of the paramagnetic units (which arises from the internal magnetic field created by the bimetallic layers in the ordered state) has been observed by Mossbauer and ESR spectroscopy.
RESUMEN
Iron and titanium oxide nanoparticles have been synthesized in parallel mesopores of alumina by a novel organometallic "chimie douce" approach that uses bis(toluene)iron(0) (1) and bis(toluene)titanium(0) (2) as precursors. These complexes are molecular sources of iron and titanium in a zerovalent atomic state. In the case of 1, core shell iron/iron oxide particles with a strong magnetic coupling between both components, as revealed by magnetic measurements, are formed. Mössbauer data reveal superparamagnetic particle behavior with a distinct particle size distribution that confirms the magnetic measurements. The dependence of the Mössbauer spectra on temperature and particle size is explained by the influence of superparamagnetic relaxation effects. The coexistence of a paramagnetic doublet and a magnetically split component in the spectra is further explained by a distribution in particle size. From Mössbauer parameters the oxide phase can be identified as low-crystallinity ferrihydrite oxide. In agreement with quantum size effects observed in UV-visible studies, TEM measurements determine the size of the particles in the range 5-8 nm. The particles are mainly arranged alongside the pore walls of the alumina template. TiO2 nanoparticles are formed by depositing 2 in mesoporous alumina template. This produces metallic Ti, which is subsequently oxidized to TiO2 (anatase) within the alumina pores. UV-visible studies show a strong quantum confinement effect for these particles. From UV-visible investigations the particle size is determined to be around 2 nm. XPS analysis of the iron- and titania- embedded nanoparticles reveal the presence of Fe2O3 and TiO2 according to experimental binding energies and the experimental line shapes. Ti4+ and Fe3+ are the only oxidation states of the particles which can be determined by this technique. Hydrogen reduction of the iron/iron-oxide nanoparticles at 500 degrees C under flowing H2/N2 produces a catalyst, which is active towards formation of carbon nanotubes by a CVD process. Depending on the reaction conditions, the formation of smaller carbon nanotubes inside the interior of larger carbon nanotubes within the alumina pores can be achieved. This behavior can be understood by means of selectively turning on and off the iron catalyst by adjusting the flow rate of the gaseous carbon precursor in the CVD process.