RESUMEN
To control the synthesis of designer catalysts on graphitic materials up to the nanometer scale, methods should be provided that combine both nanoscale characterization and bulk scale experiments. This work reports the grafting of N-heterocyclic carbene (NHC)-type catalysts on graphite, both at nanometer and bulk scale, as it allows increased insights into the nature of the immobilized catalysts.
RESUMEN
The dehydrogenation of long-chain alkanes to olefins and alkylaromatics is a challenging endothermic reaction, typically requiring harsh conditions which can lead to low selectivity and coking. More favorable thermodynamics can be achieved by using a hydrogen acceptor, such as ethylene. In this work, the potential of heterogeneous platinum catalysts for the transfer dehydrogenation of long-chain alkanes is investigated, using ethylene as a convenient hydrogen acceptor. Pt/C and Pt-Sn/C catalysts were prepared via a simple polyol method and characterized with CO pulse chemisorption, HAADF-STEM, and EDX measurements. Conversion of ethylene was monitored via gas-phase FTIR, and distribution of liquid products was analyzed via GC-FID, GC-MS, and 1H-NMR. Compared to unpromoted Pt/C, Sn-promoted catalysts show lower initial reaction rates, but better resistance to catalyst deactivation, while increasing selectivity towards alkylaromatics. Both reaction products and ethylene were found to inhibit the reaction significantly. At 250 °C for 22 h, TON up to 28 and 86 mol per mol Pt were obtained for Pt/C and PtSn2/C, respectively, with olefin selectivities of 94% and 53%. The remaining products were mainly unbranched alkylaromatics. These findings show the potential of simple heterogeneous catalysts in alkane transfer dehydrogenation, for the preparation of valuable olefins and alkylaromatics, or as an essential step in various tandem reactions.
RESUMEN
Medical 225Ac/213Bi radionuclide generators are designed to provide a local supply of the short-lived 213Bi for cancer treatment. However, radiation-induced damage to the sorbents commonly used in such radionuclide generators remains a major concern. In this study, the effects of gamma radiation on AG MP-50 cation exchange resin and sulfonated activated carbon (SAC) were studied by analyzing the changes in the morphological characteristics, functional groups, and the La3+/Bi3+ sorption performance, with La3+ being a suitable non-radioactive substitute for Ac3+. The surface sulfonic acid groups of AG MP-50 resin suffered from severe radiation-induced degradation, while the particle morphology was changed markedly after being exposed to absorbed doses of approximately 11 MGy. As a result, the sorption performance of irradiated AG MP-50 for La3+ and Bi3+ was significantly decreased with increasing absorbed doses. In contrast, no apparent changes in acquired morphological characteristics were observed for pristine and irradiated SAC based on SEM and XRD characterization. The surface oxygen content (e.g., O-C[double bond, length as m-dash]O) of irradiated SAC increased for an absorbed dose of 11 MGy due to free radical-induced oxidation. The sorption performance of pristine and irradiated SAC materials for La3+ and Bi3+ remained generally the same at pH values of 1 and 2. Furthermore, the applicability of AG MP-50 and SAC in the 225Ac/213Bi generators was illustrated in terms of their radiolytic stability. This study provides further evidence for the practical implementation of both AG MP-50 and SAC in 225Ac/213Bi radionuclide generators.
RESUMEN
We report on the fast reaction kinetics of an imine based 2D polymer (2DP) formed from a single monomer carrying both aldehyde and amine groups. Our results point towards a direct monomer-to-crystalline polymer transition without an amorphous intermediate.
RESUMEN
Foreign body response (FBR), inflammation, and fibrotic encapsulation of neural implants remain major problems affecting the impedance of the electrode-tissue interface and altering the device performance. Adhesion of proteins and cells (e.g., pro-inflammatory macrophages, and fibroblasts) triggers the FBR cascade and can be diminished by applying antifouling coatings onto the implanted devices. In this paper, we report the deposition and characterization of a thin (±6 nm) sulfobetaine-based coating onto microfabricated platinum electrodes and cochlear implant (CI) electrode arrays. We found that this coating has stable cell and protein-repellent properties, for at least 31 days in vitro, not affected by electrical stimulation protocols. Additionally, its effect on the electrochemical properties relevant to stimulation (i.e., impedance, charge injection capacity) was negligible. When applied to clinical CI electrode arrays, the film was successful at inhibiting fibroblast adhesion on both the silicone packaging and the platinum/iridium electrodes. In vitro, in fibroblast cultures, coated CI electrode arrays maintained impedance values up to five times lower compared to non-coated devices. Our studies demonstrate that such thin sulfobetaine containing layers are stable and prevent protein and cell adhesion in vitro and are compatible for use on CI electrode arrays. Future in vivo studies should be conducted to investigate its ability to mitigate biofouling, fibrosis, and the resulting impedance changes upon long-term implantation in vivo.
Asunto(s)
Incrustaciones Biológicas , Técnicas Biosensibles , Incrustaciones Biológicas/prevención & control , Platino (Metal)/química , Materiales Biocompatibles Revestidos/química , Electrodos Implantados , Impedancia EléctricaRESUMEN
Two-dimensional (2D) chirality has been actively studied in view of numerous applications of chiral surfaces such as in chiral resolutions and enantioselective catalysis. Here, we report on the expression and amplification of chirality in hybrid 2D metallosupramolecular networks formed by a nucleobase derivative. Self-assembly of a guanine derivative appended with a pyridyl node was studied at the solution-graphite interface in the presence and absence of coordinating metal ions. In the absence of coordinating metal ions, a monolayer that is representative of a racemic compound was obtained. This system underwent spontaneous resolution upon addition of a coordinating ion and led to the formation of a racemic conglomerate. The spontaneous resolution could also be achieved upon addition of a suitable guest molecule. The mirror symmetry observed in the formation of the metallosupramolecular networks could be broken via the use of an enantiopure solvent, which led to the formation of a globally homochiral surface.
Asunto(s)
Metales , Estereoisomerismo , CatálisisRESUMEN
Adsorptive separation is a promising lower-energy alternative for traditional industrial separation processes. While carbon-based materials have a long history in adsorptive removal of organic contaminants from solution or gas mixtures, separation using an adsorption/desorption protocol is rarely considered. The main drawbacks are the limited control in bulk adsorption experiments, as often all organic molecules are adsorbed, and lack of desorption methods to retrieve the adsorbed molecules. Using high-resolution on-surface characterization with scanning tunneling microscopy (STM), an increased understanding of the on-surface adsorption behavior under different conditions was obtained. The insight obtained from the nanoscale experiments was used to develop a highly selective separation method using adsorption and desorption on graphite, which was tested for the separation of quinonoid zwitterions. These experiments on adsorptive separation using self-assembly on graphite show its potential and demonstrate the advantage of combining surface characterization techniques with bulk experiments to exploit different possible applications of carbon-based materials.
RESUMEN
Surface modification of cellulose nanocrystals (CNC) by organocatalysed grafting from ring-opening polymerization (ROP) of trimethylene carbonate was investigated. Organocatalysts including an amidine (DBU), a guanidine (TBD), an amino-pyridine (DMAP) and a phosphazene (BEMP) were successfully assessed for this purpose, with performances in the order TBD > BEMP > DMAP, DBU. The grafting ratio can be tuned by varying the experimental parameters, with the highest grafting of 74 % by weight obtained under mild conditions, i.e at room temperature in tetrahydrofuran with a low amount of catalyst. This value is much higher than that of typical ring opening polymerizations of cyclic esters initiated from the surface of cellulose nanoparticles. Additionally, DSC analysis of the modified material revealed the presence of a glass transition temperature, indicative of a sufficient graft length to display polymeric behaviour. This is, to our knowledge, the first example of cellulose nanocrystals grafted with polycarbonate chains.
Asunto(s)
Celulosa , Nanopartículas , Carbonatos , Celulosa/química , Nanopartículas/química , Polimerizacion , Polímeros/químicaRESUMEN
Gas-phase acylation is an attractive and sustainable method for modifying the surface properties of cellulosics. However, little is known concerning the regioselectivity of the chemistry, i.e., which cellulose hydroxyls are preferentially acylated and if acylation can be restricted to the surface, preserving crystallinities/morphologies. Consequently, we reexplore simple gas-phase acetylation of modern-day cellulosic building blocks - cellulose nanocrystals, pulps, dry-jet wet spun (regenerated cellulose) fibres and a nanocellulose-based aerogel. Using advanced analytics, we show that the gas-phase acetylation is highly regioselective for the C6-OH, a finding also supported by DFT-based transition-state modelling on a crystalloid surface. This contrasts with acid- and base-catalysed liquid-phase acetylation methods, highlighting that gas-phase chemistry is much more controllable, yet with similar kinetics, to the uncatalyzed liquid-phase reactions. Furthermore, this method preserves both the native (or regenerated) crystalline structure of the cellulose and the supramolecular morphology of even delicate cellulosic constructs (nanocellulose aerogel exhibiting chiral cholesteric liquid crystalline phases). Due to the soft nature of this chemistry and an ability to finely control the kinetics, yielding highly regioselective low degree of substitution products, we are convinced this method will facilitate the rapid adoption of precisely tailored and biodegradable cellulosic materials.
RESUMEN
Covalent functionalization of graphene (CFG) has shown attractive advantages in tuning the electronic, mechanical, optical, and thermal properties of graphene. However, facile, large-scale, controllable, and highly efficient CFG remains challenging and often involves highly reactive and volatile compounds, requiring complex control of the reaction conditions. Here, a diazonium-based grafting ink consisting of only two components, i.e., an aryl diazonium salt and the solvent dimethyl sulfoxide (DMSO) is presented. The efficient functionalization is attributed to the combination of the solvation of the diazonium cations by DMSO and n-doping of graphene by DMSO, thereby promoting electron transfer (ET) from graphene to the diazonium cations, resulting in the generation of aryl radicals which subsequently react with the graphene. The grafting density of CFG is controlled by the reaction time and very high levels of functionalization, up to the failing of the Tuinstra-Koenig (T-K) relation, while the functionalization layer remains at monolayer height. The grafting ink, effective for days at room temperature, can be used at ambient conditions and renders the patterning CFG by direct writing as easy as writing on paper. In combination with thermal sample treatment, reversible functionalization is possible by subsequent writing/erasing cycles.
RESUMEN
Efficient wound repair is crucial for mammalian survival. Healing of skin wounds is severely hampered in diabetic patients, resulting in chronic non-healing wounds that are difficult to treat. High-mobility group box 1 (HMGB1) is an important signaling molecule that is released during wounding, thereby delaying regenerative responses in the skin. Here, we show that dissolving glycyrrhizin, a potent HMGB1 inhibitor, in water results in the formation of a hydrogel with remarkable rheological properties. We demonstrate that these glycyrrhizin-based hydrogels accelerate cutaneous wound closure in normoglycemic and diabetic mice by influencing keratinocyte migration. To facilitate topical application of glycyrrhizin hydrogels on cutaneous wounds, several concentrations of glycyrrhizinic acid in water were tested for their rheological, structural, and biological properties. By varying the concentration of glycyrrhizin, these hydrogel properties can be readily tuned, enabling customized wound care.
RESUMEN
Understanding the colloidal stability and aggregation behavior of TiO2 nanoparticles in aqueous suspension is a prerequisite to tune supracolloidal structure formation. While the aggregation mechanism for dried TiO2 nanopowders is well documented, there is still work to be done to understand TiO2 nanoparticle aggregation in suspension. Therefore, this work focuses on the colloidal stability and aggregation mechanism of TiO2 nanoparticle aqueous suspensions prepared using a straightforward one-step sol-gel-based approach over a concentration range of 0.5-5 wt %. Fully crystalline nanoparticles consisting primarily of anatase were obtained. After assessing the colloidal stability of the as-prepared suspensions, small-angle X-ray scattering coupled with fractal analysis was carried out. This analysis showed, for the first time, how the TiO2 nanoparticle aggregation mechanismâpredicted by the diffusion limited cluster-cluster aggregation (DLCA) and diffusion limited particle-cluster aggregation (DLA) theoriesâdepends directly on the starting concentration in the aqueous suspensions. We found that concentrated suspensions favored DLA, while dilute suspensions tend to follow the DLCA mechanism. The effect of the aggregation mechanism on the aggregate shape is also discussed.
RESUMEN
The chemical patterning of graphene is being pursued tenaciously due to exciting possibilities in electronics, catalysis, sensing, and photonics. Despite the intense efforts, spatially controlled, multifunctional covalent patterning of graphene has not been achieved. The lack of control originates from the inherently poor reactivity of the basal plane of graphene, which necessitates the use of harsh chemistries. Here, we demonstrate spatially resolved multicomponent covalent chemical patterning of single layer graphene using a facile and efficient method. Three different functional groups could be covalently attached to the basal plane in dense, well-defined patterns using a combination of lithography and a self-limiting variant of diazonium chemistry requiring no need for graphene activation. The layer thickness of the covalent films could be controlled down to 1 nm. This work provides a solid foundation for the fabrication of chemically patterned multifunctional graphene interfaces for device applications.
RESUMEN
Optical brightening agents (OBAs) are commonly used in textile and paper industry to adjust product brightness and color appearence. Continuous production processes lead to short residence time of the dyes in the fiber suspension, making it necessary to understand the kinetics of adsorption. The interaction mechanisms of OBAs with cellulose are challenging to establish as the fibrous nature of cellulosic substrates complicates acquisition of real-time data. Here, we explore the real-time adsorption of different OBAs (di, tetra- and hexasulfonated compounds) onto different cellulose surfaces using surface plasmon resonance spectroscopy. Ionic strength, surface topography and polarity were varied and yielded 0.76-11.35â¯mgâ¯m-2 OBA on cellulose. We identified four independent mechanisms governing OBA-cellulose interactions. These involve the polarity of the cellulose surface, the solubility of the OBA, the ionic strength during adsorption and presence of bivalent cations such as Ca2+. These results can be exploited for process optimization in related industries as they allow for a simple adjustment and experimental testing procedures including performance assessment of novel OBAs.
RESUMEN
Covalent functionalization is one of the most efficient ways to tune the properties of layered materials in a highly controlled manner. However, molecular chemisorption on semiconducting transition metal dichalcogenides remains a delicate task due to the inertness of their surface. Here we perform covalent modification of bulk and single layer molybdenum disulfide (MoS2) using chemical activation of diazonium salts. A high level of control over the grafting density and yield on MoS2 basal plane can be achieved by this approach. Using scanning probe microscopies and X-ray photoelectron spectroscopy we prove the covalent functionalization of MoS2.
RESUMEN
The surface initiated ring opening polymerization (SI-ROP) of cellulose nanofibers (CNF) with rac-Lactide under mild conditions using N,N-dimethyl aminopyridine (DMAP) was investigated. The influence of catalyst amount, monomer-to-initiator (cellulose surface -OH groups) ratio, temperature, and cellulose preconditioning (lyophilization vs solvent exchange) were studied to determine the best SI-ROP conditions, and to understand the effect of the parameters on grafting efficiency. The fibers modified after lyophilization had a PLA content comparable to those obtained with traditional metal catalysts (e.g. tin-(II)ethylhexanoate). Starting from a stable dispersion of CNF in dichloromethane obtained through solvent-exchange showed better results at low catalyst amounts. Furthermore, DMAP was readily removed from the products whereas metal catalysts can be hard to remove from the final material, potentially shortening the material lifespan and making it unfit for some applications. Therefore, the use of an easily removable and more efficient organocatalyst can be considered a good alternative to metal catalysts.
RESUMEN
Correction for 'Patience is a virtue: self-assembly and physico-chemical properties of cellulose nanocrystal allomorphs' by Gwendoline Delepierre, et al., Nanoscale, 2020, 12, 17480-17493, DOI: 10.1039/d0nr04491a.
RESUMEN
The chemistry of carbon surfaces has regained traction in recent years in view of its applicability towards covalent modification of a variety of (2D) materials. A general requisite is the formation of a dense and well-defined monolayer of aryl groups covalently bound to the surface. Given the use of reactive chemistries however, it is often not easy to achieve precise control over the monolayer growth while maintaining high grafting densities. Here we present a straightforward experimental protocol for the fabrication of well-defined covalent monolayers onto the surface of graphite. Using a combination of surface analytical tools, we demonstrate that the ascorbic acid mediated dediazoniation of aryldiazonium salts leads to self-limiting growth of monolayers with high grafting densities. The aryl radicals preferentially attach to the basal plane of the substrate and once the surface is covered with a covalent monolayer, the surface reaction does not proceed further to an appreciable extent. The layer thickness of the covalent films was measured using atomic force microscopy whereas the grafting efficiencies were assessed using Raman spectroscopy. The chemical composition of the grafted films was studied using X-ray photoelectron spectroscopy whereas scanning tunneling microscopy provided nanometer scale insight into the structure of the covalent films. Mechanistic aspects of the process are also discussed. The self-terminating chemistry described here is a new addition to the synthetic armory for covalent modification of materials and sets a strong foundation for achieving precise nanoscale control over the covalent functionalization process.
RESUMEN
Cellulose nanocrystals (CNCs) are bio-based rod-like nanoparticles with a quickly expanding market. Despite the fact that a variety of production routes and starting cellulose sources are employed, all industrially produced CNCs consist of cellulose I (CNC-I), the native crystalline allomorph of cellulose. Here a comparative study of the physico-chemical properties and liquid crystalline behavior of CNCs produced from cellulose II (CNC-II) and typical CNC-I is reported. CNC-I and CNC-II are isolated by sulfuric acid hydrolysis of cotton and mercerized cotton, respectively. The two allomorphs display similar surface charge densities and ζ-potentials and both have a right-handed twist, but CNC-II have a slightly smaller average length and aspect ratio, and are less hygroscopic. Interestingly, the self-assembly behavior of CNC-I and CNC-II in water is different. Whilst CNC-I forms a chiral nematic phase, CNC-II initially phase separates into an upper isotropic and a lower nematic liquid crystalline phase, before a slow reorganization into a large-pitch chiral nematic texture occurs. This is potentially caused by a combination of factors, including the inferred faster rotational diffusion of CNC-II and the different crystal structures of CNC-I and CNC-II, which are responsible for the presence and absence of a giant dipole moment, respectively.