Improvement of Intracellular Interactions through Liquid Crystalline Elastomer Scaffolds by the Alteration of Topology.

Preparation of inherently bioactive scaffolds has become a challenging issue owing to their complicated synthesis and nonrobust modified cell-actuating property. Liquid crystalline elastomers (LCEs), due to their combined specialties of liquid crystals and elastomers as well as their ability to respond to various kinds of stimuli, have reversibly led to the design of a new class of stimuli-responsive tissue-engineered scaffolds. In this line, in the first stage of this research work, synthesis and evaluation of acrylate-based LCE films (LCEfilm) encompassing mesogenic monomers are carried out. In the second step, the design of an affordable electrospinning technique for preparing LCE nanofibers (LCEfiber) as a problematic topic, thanks to the low molecular weight of the mesogenic chains of LCEs, is investigated. For this purpose, two approaches are considered, including (1) photo-cross-linking of electrospun LCEfiber and (2) blending LCE with poly(ε-caprolactone) (PCL) to produce morphologically stable nanofibers (PCL-LCEfiber). In the following, thermal, mechanical, and morphological evaluations show the optimized crosslinker (mol)/aliphatic spacer (mol) molar ratio of 50:50 for LCEfilm samples. On the other hand, for LCEfiber samples, the appropriate amounts of excessive mesogenic monomer and PCL/LCE (v/v) to fabricate the uniform nanofibers are determined to be 20% and 1:2, respectively. Eventually, PC12 cell compatibility and the impact of the liquid crystalline phase on the PC12 cell dynamic behavior of the samples are examined. The obtained results reveal that PC12 cells cultured on electrospun PCL-LCEfiber nanofibers with an average diameter of ∼659 nm per sample are alive and the scaffold has susceptibility for cell proliferation and actuation because of the rapid increase in cell density and number of singularity points formed in time-lapse cell imaging. Moreover, the PCL-LCEfiber nanofibrous scaffold exhibits a high performance for cell differentiation according to detailed biological evaluations such as gene expression level measurements. The time-lapse evaluation of PC12 cell flow fields confirms the significant influence of the reprogrammable liquid crystalline phase in the PCL-LCEfiber nanofibrous scaffold on topographical cue induction compared to the biodegradable PCL nanofibers.

Kiwi extract-incorporated poly(ɛ-caprolactone)/cellulose acetate blend nanofibers for healing acceleration of burn wounds.

Kiwi extract (KE) including different components such as quercetin, vitamins C and E, and actinides has been known as a debridement agent for burn wounds. In this study, electrospun poly(ɛ-caprolactone)/cellulose acetate blend nanofibers incorporating KE (PCL/CA/KE) were prepared and their performance was evaluated for healing acceleration of burn wounds. The physicochemical characterization of PCL/CA/KE nanofibers showed an average diameter of ∼420 nm, porosity of 70%, water contact angle of 61°, and water uptake of ∼220%. Moreover, the continuous release trend of KE from PCL/CA blend nanofibers happened during 24 h and the release mechanism was governed by the Fickian diffusion. Besides the cytocompatibility of PCL/CA/KE nanofibers, their in vivo experiments revealed that the bioactive wound dressing based on the sample has higher wound closure compared to KE after 21 days. Histopathology of wounds dressed by PCL/CA/KE nanofibers indicated epidermal formation along with a fully extended layer. Eventually, the obtained results confirmed that the PCL/CA/KE nanofibrous sample was a promising wound dressing for burn wound healing.

Conductive conduit based on electrospun poly (l-lactide-co-D, l-lactide) nanofibers containing 4-aminopyridine-loaded molecularly imprinted poly (methacrylic acid) nanoparticles used for peripheral nerve regeneration.

Using biocompatible polymer nanofibrous conduits with a controlled drug delivery have attracted much attention for peripheral nerve regeneration. This work was aimed at preparing electrospun poly (l-lactide-co-D, l-lactide) (PLDLLA) containing multi-walled carbon nanotubes (MWCNTs) and 4-aminopyridine (4-AP)-loaded molecularly imprinted nanoparticles (MIP4-AP) as well as evaluating their performance in in vitro and in vivo assessments. After synthesis of MIP4-AP based on poly (methacrylic acid) with imprinting factor of 1.78, it was incorporated into the PLDLLA/MWCNTs nanofibers to optimize. By adjusting the process variables, the average diameter and electrical conductivity of the nanofibrous sample were 92 nm and 2870 × 10-7 S cm-1, respectively. Afterward, 4-AP release of the optimum sample showed the presence of MIP4-AP leading to initial burst release decrease and plateau level postpone up to 96 h. Moreover, the culture results of PC12 as neuroblastoma cell line on optimal PLDLLA/MWCNTs/MIP4-AP nanofibrous sample revealed the highest cell proliferation without cytotoxicity compared to neat nanofibers. Eventually, the animal model experiment exhibited that the conductive conduit based on the optimum sample was able to repair the rat's sciatic nerve after four weeks in accordance with sciatic function index and histological studies.

Antibacterial nanofibers based on poly(l-lactide-co-d, l-lactide) and poly(vinyl alcohol) used in wound dressings potentially: a comparison between hybrid and blend properties.

Morphology, hydrophilicity, degradation, mechanical properties, drug release, bacterial resistance, and cell viability are indispensable parameters for a bioactive wound dressing. In this work, the aforementioned terms between hybrid and blend nanofibrous samples based on poly (L-lactide-co-D, L-lactide) (PLDLLA) and poly (vinyl alcohol) (PVA) containing triclosan (Tri) as an antibacterial drug were investigated. The FE-SEM images showed that the presence of Tri in the hybrid and blend samples led to bimodal, and unimodal diameter size distributions. The FTIR spectra revealed that the addition of PVA caused to shift the carbonyl bond of PLDLLA in the blend sample, and DSC thermograms exhibited the immiscibility of PVA and PLDLLA polymers in the blend. Moreover, the hybrid sample showed higher hydrophilicity with water contact angle (WCA) of 53[Formula: see text] than the blend ones with WCA of 73[Formula: see text] which proved by water up-take test. In the following, the antibacterial evaluation showed better results for hybrid-Tri with the maximum growth inhibitory zones of 35 mm and 48 mm for E. coli and S. aureus, respectively. On the other hand, the hybrid nanofibrous sample showed remarkable mechanical properties (tensile stress ∼19 MPa, and Young's modulus ∼532 MPa). Finally, the SNL 76/7 fibroblast cell line culture confirmed that the hybrid-Tri nanofibrous sample had better proliferation performance than the blend-Tri sample because of the minimal cytotoxicity and maximal cell viability by MTT and acridine orange/ethidium bromide staining.