Double-Layer Hydrogel with Glucose-Activated Two-Stage ROS Regulating Properties for Programmed Diabetic Wound Healing.

Slow healing of wounds induces great pain in diabetic patients. However, developing new approaches to promote diabetic wound healing is still one of the toughest challenges in the medical field. Here, we constructed a new double-layer hydrogel to effectively regulate reactive oxygen species (ROS) on the wound and promote diabetic wound healing. The inner layer contains glucose oxidase (Gox), ferrocene-modified quaternary ammonium chitosan (Fc-QCs), and poly(ß-cyclodextrin) (Pß-CD), which is used to generate hydroxyl radicals (•OH) for antibacterial in the early stage of wound healing and collapses gradually. The outer layer is composed of gelatin and dopamine. In the later stage of wound healing, the outer layer contacts the skin, which is beneficial for ROS clearance on the wound. Antibacterial, ROS scavenging, and wound healing experiments have shown that the double-layer hydrogel possesses two-stage ROS regulating properties for programmed diabetic wound healing. In conclusion, it will be one of the most potential dressings for treating diabetic wounds in the future.

Azadirachtin Inhibits Nuclear Receptor HR3 in the Prothoracic Gland to Block Larval Ecdysis in the Fall Armyworm, Spodoptera frugiperda.

Azadirachtin has been used to control agricultural pests for a long time; however, the molecular mechanism of azadirachtin on lepidopterans is still not clear. In this study, the fourth instar larvae of fall armyworm were fed with azadirachtin, and then the ecdysis was blocked in the fourth instar larval stage (L4). The prothoracic glands (PGs) of the treated larvae were dissected for RNA sequencing to determine the effect of azadirachtin on ecdysis inhibition. Interestingly, one of the PG-enriched genes, the nuclear hormone receptor 3 (HR3), was decreased after azadirachtin treatment, which plays a critical role in the 20-hydroxyecdysone action during ecdysis. To deepen the understanding of azadirachtin on ecdysis, the HR3 was knocked out by using the CRISPR/Cas9 system, while the HR3 mutants displayed embryonic lethal phenotype; thus, the stage-specific function of HR3 during larval molting was not enabled to unfold. Hence, the siRNA was injected into the 24 h L4 larvae to knock down HR3. After 96 h, the injected larvae were blocked in the old cuticle during ecdysis which is consistent with the azadirachtin-treated larvae. Taken together, we envisioned that the inhibition of ecdysis in the fall armyworm after the azadirachtin treatment is due to an interference with the expression of HR3 in PG, resulting in larval mortality. The results in this study specified the understanding of azadirachtin on insect ecdysis and the function of HR3 in lepidopteran in vivo.

Poly ß-Cyclodextrin/Quaternary Ammoniated Chitosan Cryogel with a Porous Structure for Effective Hemostasis.

Uncontrolled bleeding is one of the most important causes threatening human health, but quick hemostasis remains a challenge. We prepared porous cryogels with poly ß-cyclodextrin (Pß-CD) and quaternary ammoniated chitosan (QCs). Pß-CD acts as a "water-grabbing agent" to assist QCs' ability to absorb and concentrate blood rapidly. The rat-tail amputation model and liver injury model exhibited that cryogels had excellent hemostatic performance. Moreover, cryogels showed good antibacterial activity and biocompatibility. Therefore, these cryogels can be used as potential hemostatic materials.

Bioinspired Ultra Tear-Resistant Elastomer with a Slidable Double-Network Structure.

Tear resistance is of vital importance in the fabrication and application of synthetic soft materials. However, the paradox of simultaneously improving the tearing energy and elasticity remains a huge challenge for conventional approaches. Here, inspired by the skin, we successfully constructed an extraordinary tear-resistant, superelastic elastomer by the introduction of nanosized polycyclodextrin into the elastomer network to form a slidable interpenetrate double network structure. The tearing energy of the SDEP elastomer is up to 274 KJ/m2, which is comparable to metals and alloys and increased more than 100 times compared with the chemically cross-linked elastomer. The fracture strain exceeded 3300%, which is hardly achieved by other materials with high tearing energy. This comprehensive improvement of antitearing and super elasticity property was achieved by (i) a slide ring effect to dissipate energy and blunt a crack tip; (ii) straightening and reorientation of the slidable double network to deflect the advancing of a crack tip; (iii) a double network sharing the load. These results provide a novel strategy to fabricate elastic, tear-resistant soft material, which may contribute to the practical application as tear-resistant flexible electronics and irregular-shaped stretchable devices.

Ultrahigh Carbon Dioxide-Selective Composite Membrane Containing a γ-CD-MOF Layer.

Mixed matrix membranes (MMMs) for CO2 separation have overcome the trade-off between gas permeability and gas selectivity to some extent. However, most MMMs still are prepared in lab- and pilot-scales since the permeability and selectivity of CO2 are not good enough to reach the economically available requirements. Moreover, the fabrication of few MMMs with good separation performance is time-consuming or need harsh conditions. In this study, a novel MOF-based composite membrane (PAN-γ-CD-MOF-PU membrane) was successfully fabricated by a facile and fast spin-coating method. In the two-step coating process, we applied a uniform selective layer of γ-cyclodextrin-MOF (γ-CD-MOF) on porous polyacrylonitrile and then coated a layer of polyurethane on the γ-CD-MOF layer. The entire membrane formation process was about 30 s. The formation of a unique γ-CD-MOF layer greatly improved the separation ability of CO2 (the CO2 permeability is 70.97 barrers; the selectivity to CO2/N2 and CO2/O2 are 253.46 and 154.28, respectively). The gas separation performance can exceed the Robeson upper limit obviously and the selectivity is better than other MOF-based composite membranes. In addition, the PAN-γ-CD-MOF-PU membrane is strong and flexible. Therefore, the PAN-γ-CD-MOF-PU membrane developed in this study has great potential in large-scale industrial separation of CO2.

Facile Fabrication of an AIE-Active Metal-Organic Framework for Sensitive Detection of Explosives in Liquid and Solid Phases.

Nowadays, the practical applications of metal-organic framework (MOF)-based fluorescence detectors are severely hindered because of the complex synthesis process of linkers or heavy metal contamination. The development of a simple, inexpensive, and environmentally friendly fluorescence sensing system remains a huge challenge. In this study, we designed and synthesized a TPE@γ-CD-MOF-K complex using the facile in situ encapsulation method. The unique pore structure of γ-CD-MOF allowed it to effectively include TPE and explosives as guests simultaneously. The TPE@γ-CD-MOF-K showed stronger fluorescence emission than TPE and sensitive fluorescence quenching activities in response to nitro-aromatic compounds in the liquid phase with detection limits as low as 3 ppm. Furthermore, TPE@γ-CD-MOF-K can also effectively detect nitro-aromatic compounds in the solid state, which is very convenient for practical detection of explosives. The unique pore structure of γ-CD-MOF-K and the interaction between K+ and nitro compounds play important roles in solid-state quenching.

Reprint of 'Evaluating organophosphate poisoning in human serum with paper'.

This manuscript describes the development and clinical testing of a paper-based, metabolic assay designed for rapid, semi-quantitative measurement of organophosphate poisoning. Paper-based platforms, including point-of-care devices and 96-well plates, provided semi-quantitative information regarding the concentration of AchE (a biomarker for organophosphate poisoning). The paper-based 96-well-plate developed and implemented in this study was used to measure the level of organophosphate poisoning in three different clinical patients. Results were comparable to those obtained using conventional hospital methods currently considered the "gold standard". This diagnostic device offers several advantages over conventional methods, including short operating time (twice as fast as conventional methods), procedure simplicity, and reduced fabrication cost. With further commercialization efforts, the methods described in this manuscript could be applied to a wide range of potential diagnostic applications in the field.

Evaluating organophosphate poisoning in human serum with paper.

This manuscript describes the development and clinical testing of a paper-based, metabolic assay designed for rapid, semi-quantitative measurement of organophosphate poisoning. Paper-based platforms, including point-of-care devices and 96-well plates, provided semi-quantitative information regarding the concentration of AchE (a biomarker for organophosphate poisoning). The paper-based 96-well-plate developed and implemented in this study was used to measure the level of organophosphate poisoning in three different clinical patients. Results were comparable to those obtained using conventional hospital methods currently considered the "gold standard". This diagnostic device offers several advantages over conventional methods, including short operating time (twice as fast as conventional methods), procedure simplicity, and reduced fabrication cost. With further commercialization efforts, the methods described in this manuscript could be applied to a wide range of potential diagnostic applications in the field.

Paper-based ELISA for the detection of autoimmune antibodies in body fluid-the case of bullous pemphigoid.

Bullous pemphigoid (BP), a common autoimmune blistering disease, is increasing in incidence and conveys a high mortality. Detection of autoantibodies targeting the noncollagenous 16A (NC16A) domain of type XVII collagen using enzyme-linked immunosorbent assay (ELISA) has demonstrated high sensitivity and specificity for diagnosing BP. We have developed a rapid, low-cost, and widely applicable ELISA-based system to detect the NC16A autoimmune antibody and then diagnose and monitor BP disease activity using a piece of filter paper, a wax-printer, and NC16A antigens. Both sera and/or blister fluids from 14 untreated BP patients were analyzed. The control group included healthy volunteers and patients with other blistering disorders such as pemphigus vulgaris. In our established paper-based ELISA (P-ELISA) system, only 2 µL of serum or blister fluid and 70 min were required to detect anti-NC16A autoimmune antibodies. The relative color intensity was significantly higher in the BP group than in the control groups when using either serum (P < 0.05) or blister fluid (P < 0.001) specimens from BP patients. The results of P- ELISA were moderately correlated with the titer of the commercial ELISA kit (MBL, Japan) (rho = 0.5680, P = 0.0011). This newly developed system allows for rapid and convenient diagnosis and/or monitoring of BP disease activity.