RESUMEN
The discovery of a subunit exchange in some oligomeric proteins, implying short-term dissociation of their oligomeric structure, requires new insights into the role of the quaternary structure in oligomeric protein stability and function. Here we demonstrate the effect of pH, protein concentration, and urea on the efficiency of GroES heptamer (GroES7) subunit exchange. A mixture of equimolar amounts of wild-type (WT) GroES7 and its Ala97Cys mutant modified with iodoacetic acid (97-carboxymethyl cysteine or CMC-GroES7) was incubated in various conditions and subjected to isoelectric focusing (IEF) in polyacrylamide gel. For each sample, there are eight Coomassie-stained electrophoretic bands showing different charges that result from a different number of included mutant subunits, each carrying an additional negative charge. The intensities of these bands serve to analyze the protein subunit exchange. The protein stability is evaluated using the transverse urea gradient gel electrophoresis (TUGGE). At pH 8.0, the intensities of the initial bands corresponding to WT-GroES7 and CMC-GroES7 are decreased with a half-time of (23 ± 2) min. The exchange decreases with decreasing pH and seems to be strongly hindered at pH 5.2 due to the protonation of groups with pK â¼ 6.3, which stabilizes the protein quaternary structure. The destabilization of the protein quaternary structure caused by increased pH, decreased protein concentration, or urea accelerates the GroES subunit exchange. This study allows visualizing the subunit exchange in oligomeric proteins and confirms its direct connection with the stability of the protein quaternary structure.
Asunto(s)
Urea , Concentración de Iones de Hidrógeno , Urea/química , Subunidades de Proteína/química , Subunidades de Proteína/metabolismo , Estabilidad Proteica , Focalización IsoeléctricaRESUMEN
NMR spectroscopy studies using parahydrogen-induced polarization have previously established the existence of the pairwise hydrogen addition route in the hydrogenation of unsaturated hydrocarbons over heterogeneous catalysts, including those based on rhodium (Rh0). This pathway requires the incorporation of both hydrogen atoms from one hydrogen molecule to the same product molecule. However, the underlying mechanism for such pairwise hydrogen addition must be better understood. The involvement of carbon, either in the form of carbonaceous deposits on the surface of a catalyst or as a metal carbide phase, is known to modify catalytic properties significantly and thus could also affect the pairwise hydrogen addition route. Here, we explored carbon's role by studying the hydrogenation of propene and propyne with parahydrogen on a Rh2C catalyst and comparing the results with those for a Rh0/C catalyst obtained from Rh2C via H2 pretreatment. While the catalysts Rh2C and Rh0/C differ notably in the rate of conversion of parahydrogen to normal hydrogen as well as in terms of hydrogenation activity, our findings suggest that the carbide phase does not play a significant role in the pairwise H2 addition route on rhodium catalysts.
RESUMEN
Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.
RESUMEN
Large-scale marine heatwaves in the Northeast Pacific (NEP), identified here and previously as 'warm blobs', have devastating impacts on regional ecosystems. An anomalous atmospheric ridge over the NEP is known to be crucial for maintaining these warm blobs, also causing abnormally cold temperatures over North America during the cold season. Previous studies linked this ridge to teleconnections from tropical sea surface temperature anomalies. However, it was unclear whether teleconnections from the extratropics could also contribute to the ridge. Here we show that planetary wave trains, triggered by increased rainfall and latent heat release over the Mediterranean Sea accompanied by decreased rainfall over the North Atlantic, can transport wave energy to the NEP, guided by the westerly jet, and induce a quasi-barotropic ridge there. Our findings provide insights into extratropical teleconnections sustaining the NEP ridge, offering a source of potential predictability for the warm blobs and temperature fluctuations over North America.
RESUMEN
Over the past few decades, photodynamic therapy (PDT) has evolved as a minimally invasive treatment modality offering precise control over cancer and various other diseases. To address inherent challenges associated with PDT, researchers have been exploring two promising avenues: the development of intelligent photosensitizers activated through light-induced energy transfers, charges, or electron transfers, and the disruption of photosensitive bonds. Moreover, there is a growing emphasis on the bioorthogonal delivery or activation of photosensitizers within tumors, enabling targeted deployment and activation of these intelligent photosensitive systems in specific tissues, thus achieving highly precise PDT. This concise review highlights advancements made over the last decade in the realm of light-activated or bioorthogonal photosensitizers, comparing their efficacy and shaping future directions in the advancement of photodynamic therapy.
RESUMEN
In this report, we present a novel prodrug strategy that can significantly improve the efficiency and selectivity of combined therapy for bladder cancer. Our approach involved the synthesis of a conjugate based on a chlorin-e6 photosensitizer and a derivative of the tyrosine kinase inhibitor cabozantinib, linked by a ß-glucuronidase-responsive linker. Upon activation by ß-glucuronidase, which is overproduced in various tumors and localized in lysosomes, this conjugate released both therapeutic modules within targeted cells. This activation was accompanied by the recovery of its fluorescence and the generation of reactive oxygen species. Investigation of photodynamic and dark toxicity in vitro revealed that the novel conjugate had an excellent safety profile and was able to inhibit tumor cells proliferation at submicromolar concentrations. Additionally, combined therapy effects were also observed in 3D models of tumor growth, demonstrating synergistic suppression through the activation of both photodynamic and targeted therapy.
Asunto(s)
Nanopartículas , Fotoquimioterapia , Porfirinas , Neoplasias de la Vejiga Urinaria , Humanos , Glucuronidasa , Fármacos Fotosensibilizantes/farmacología , Fármacos Fotosensibilizantes/uso terapéutico , Neoplasias de la Vejiga Urinaria/tratamiento farmacológico , Porfirinas/farmacología , Línea Celular Tumoral , Nanopartículas/uso terapéuticoRESUMEN
Transformations of oxygenates (CO2, CO, H2O, etc.) via Mo2C-based catalysts are facilitated by the high oxophilicity of the material; however, this can lead to the formation of oxycarbides and complicate the identification of the (most) active catalyst state and active sites. In this context, the two-dimensional (2D) MXene molybdenum carbide Mo2CTx (Tx are passivating surface groups) contains only surface Mo sites and is therefore a highly suitable model catalyst for structure-activity studies. Here, we report that the catalytic activity of Mo2CTx in Fischer-Tropsch (FT) synthesis increases with a decreasing coverage of surface passivating groups (mostly O*). The in situ removal of Tx species and its consequence on CO conversion is highlighted by the observation of a very pronounced activation of Mo2CTx (pretreated in H2 at 400 °C) under FT conditions. This activation process is ascribed to the in situ reductive defunctionalization of Tx groups reaching a catalyst state that is close to 2D-Mo2C (i.e., a material containing no passivating surface groups). Under steady-state FT conditions, 2D-Mo2C yields higher hydrocarbons (C5+ alkanes) with 55% selectivity. Alkanes up to the kerosine range form, with value of α = 0.87, which is ca. twice higher than the α value reported for 3D-Mo2C catalysts. The steady-state productivity of 2D-Mo2C to C5+ hydrocarbons is ca. 2 orders of magnitude higher relative to a reference ß-Μo2C catalyst that shows no in situ activation under identical FT conditions. The passivating Tx groups of Mo2CTx can be reductively defunctionalized also by using a higher H2 pretreatment temperature of 500 °C. Yet, this approach leads to a removal of carbidic carbon (as methane), resulting in a 2D-Mo2C1-x catalyst that converts CO to CH4 with 61% selectivity in preference to C5+ hydrocarbons that are formed with only 2% selectivity. Density functional theory (DFT) results attribute the observed selectivity of 2D-Mo2C to C5+ alkanes to a higher energy barrier for the hydrogenation of surface alkyl species relative to the energy barriers for C-C coupling. The removal of O* is the rate-determining step in the FT reaction over 2D-Mo2C, and O* is favorably removed in the form of CO2 relative to H2O, consistent with the observation of a high CO2 selectivity (ca. 50%). The absence of other carbon oxygenates is explained by the energetic favoring of the direct over the hydrogen-assisted dissociative adsorption of CO.
RESUMEN
During the Neoproterozoic and Paleoproterozoic eras, geological evidence points to several "Snowball Earth" episodes when most of Earth's surface was covered in ice. These global-scale glaciations represent the most marked climate changes in Earth's history. We show that the impact winter following an asteroid impact comparable in size to the Chicxulub impact could have led to a runaway ice-albedo feedback and global glaciation. Using a state-of-the-art atmosphere-ocean climate model, we simulate the climate response following an impact for preindustrial, Last Glacial Maximum (LGM), Cretaceous-like, and Neoproterozoic climates. While warm ocean temperatures in the preindustrial and Cretaceous-like climates prevent Snowball initiation, the colder oceans of the LGM and cold Neoproterozoic climate scenarios rapidly form sea ice and demonstrate high sensitivity to the initial condition of the ocean. Given suggestions of a cold pre-Snowball climate, we argue the initiation of Snowball Earth by a large impact is a robust possible mechanism, as previously suggested by others, and conclude by discussing geologic tests.
RESUMEN
His-tags are protein affinity tags ubiquitously used due to their convenience and effectiveness. However, in some individual cases, the attachment of His-tags to a protein's N- or C-termini resulted in impairment of the protein's structure or function, which led to attempts to include His-tags inside of polypeptide chains. In this work, we describe newly designed internal His-tags, where two triplets of histidine residues are separated by glycine residues to avoid steric hindrances and consequently minimize their impact on the protein structure. The applicability of these His-tags was tested with eGFP, a multifaceted reference protein, and GrAD207, a modified apical domain of GroEL chaperone, designed to stabilize in soluble form initially insoluble proteins. Both proteins are used as fusion partners for different purposes, and providing them with His-tags introduced into their polypeptide chains should conveniently broaden their functionality without involving the termini. We conclude that the insertable tags may be adjusted for the purification of proteins belonging to different structural classes.
RESUMEN
Carbon-supported metal nanoparticles (NPs) comprise an important class of heterogeneous catalysts. The interaction between the metal and carbon support influences the overall material properties, viz., the catalytic performance. Herein we use in situ and ex situ transmission electron microscopy (TEM) in combination with in situ X-ray spectroscopy (XPS) to investigate the encapsulation of metallic iridium NPs by carbon in an Ir/C catalyst. Real-time atomic-scale imaging visualizes particle reshaping and increased graphitization of the carbon support upon heating of Ir/C in vacuum. According to in situ TEM results, carbon overcoating grows over Ir NPs during the heating process, starting from ca. 550 °C. With the carbon overlayers formed, no sintering and migration of Ir NPs is observed at 800 °C, yet the initial Ir NPs sinter at or below 550 °C, i.e., at a temperature associated with an incomplete particle encapsulation. The carbon overlayer corrugates when the temperature is decreased from 800 to 200 °C and this process is associated with the particle surface reconstruction and is reversible, such that the corrugated carbon overlayer can be smoothed out by increasing the temperature back to 800 °C. The catalytic performance (activity and stability) of the encapsulated Ir NPs in the hydrogen evolution reaction (HER) is higher than that of the initial (nonencapsulated) state of Ir/C. Overall, this work highlights microscopic details of the currently understudied phenomenon of the carbon encapsulation of supported noble metal NPs and demonstrates additionally that the encapsulation by carbon is an effective measure for tuning the catalytic performance.
RESUMEN
CaO-based sorbents are cost-efficient materials for high-temperature CO2 capture, yet they rapidly deactivate over carbonation-regeneration cycles due to sintering, hindering their utilization at the industrial scale. Morphological stabilizers such as Al2O3 or SiO2 (e.g., introduced via impregnation) can improve sintering resistance, but the sorbents still deactivate through the formation of mixed oxide phases and phase segregation, rendering the stabilization inefficient. Here, we introduce a strategy to mitigate these deactivation mechanisms by applying (Al,Si)Ox overcoats via atomic layer deposition onto CaCO3 nanoparticles and benchmark the CO2 uptake of the resulting sorbent after 10 carbonation-regeneration cycles against sorbents with optimized overcoats of only alumina/silica (+25%) and unstabilized CaCO3 nanoparticles (+55%). 27Al and 29Si NMR studies reveal that the improved CO2 uptake and structural stability of sorbents with (Al,Si)Ox overcoats is linked to the formation of glassy calcium aluminosilicate phases (Ca,Al,Si)Ox that prevent sintering and phase segregation, probably due to a slower self-diffusion of cations in the glassy phases, reducing in turn the formation of CO2 capture-inactive Ca-containing mixed oxides. This strategy provides a roadmap for the design of more efficient CaO-based sorbents using glassy stabilizers.
RESUMEN
Mo- and Fe-containing enzymes catalyze the reduction of nitrate and nitrite ions in nature. Inspired by this activity, we study here the nitrate reduction reaction (NO3 RR) catalyzed by an Fe-substituted two-dimensional molybdenum carbide of the MXene family, viz., Mo2 CTx : Fe (Tx are oxo, hydroxy and fluoro surface termination groups). Mo2 CTx : Fe contains isolated Fe sites in Mo positions of the host MXene (Mo2 CTx ) and features a Faradaic efficiency (FE) and an NH3 yield rate of 41 % and 3.2â µmol h-1 mg-1 , respectively, for the reduction of NO3 - to NH4 + in acidic media and 70 % and 12.9â µmol h-1 mg-1 in neutral media. Regardless of the media, Mo2 CTx : Fe outperforms monometallic Mo2 CTx owing to a more facile reductive defunctionalization of Tx groups, as evidenced by in situ X-ray absorption spectroscopy (Mo K-edge). After surface reduction, a Tx vacancy site binds a nitrate ion that subsequently fills the vacancy site with O* via oxygen transfer. Density function theory calculations provide further evidence that Fe sites promote the formation of surface O vacancies, which are identified as active sites and that function in NO3 RR in close analogy to the prevailing mechanism of the natural Mo-based nitrate reductase enzymes.
RESUMEN
Gallia-based shells with a thickness varying from a submonolayer to ca. 2.5 nm were prepared by atomic layer deposition (ALD) using trimethylgallium, ozone, and partially dehydroxylated silica, followed by calcination at 500 °C. Insight into the atomic-scale structure of these shells was obtained by high-field 71Ga solid-state nuclear magnetic resonance (NMR) experiments and the modeling of X-ray differential pair distribution function data, complemented by Ga K-edge X-ray absorption spectroscopy and 29Si dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS) studies. When applying one ALD cycle, the grown submonolayer contains mostly tetracoordinate Ga sites with Si atoms in the second coordination sphere ([4]Ga(Si)) and, according to 15N DNP SENS using pyridine as the probe molecule, both strong Lewis acid sites (LAS) and strong Brønsted acid sites (BAS), consistent with the formation of gallosilicate Ga-O-Si and Ga-µ2-OH-Si species. The shells obtained using five and ten ALD cycles display characteristics of amorphous gallia (GaOx), i.e., an increased relative fraction of pentacoordinate sites ([5]Ga(Ga)), the presence of mild LAS, and a decreased relative abundance of strong BAS. The prepared Ga1-, Ga5-, and Ga10-SiO2-500 materials catalyze the dehydrogenation of isobutane to isobutene, and their catalytic performance correlates with the relative abundance and strength of LAS and BAS, viz., Ga1-SiO2-500, a material with a higher relative fraction of strong LAS, is more active and stable compared to Ga5- and Ga10-SiO2-500. In contrast, related ALD-derived Al1-, Al5-, and Al10-SiO2-500 materials do not catalyze the dehydrogenation of isobutane and this correlates with the lack of strong LAS in these materials that instead feature abundant strong BAS formed via the atomic-scale mixing of Al sites with silica, leading to Al-µ2-OH-Si sites. Our results suggest that [4]Ga(Si) sites provide strong Lewis acidity and drive the dehydrogenation activity, while the appearance of [5]Ga(Ga) sites with mild Lewis activity is associated with catalyst deactivation through coking. Overall, the atomic-level insights into the structure of the GaOx-based materials prepared in this work provide a guide to design active Ga-based catalysts by a rational tailoring of Lewis and Brønsted acidity (nature, strength, and abundance).
RESUMEN
Herein, we describe the synthesis of pH-sensitive lipophilic colchicine prodrugs for liposomal bilayer inclusion, as well as preparation and characterization of presumably stealth PEGylated liposomes with above-mentioned prodrugs. These formulations liberate strongly cytotoxic colchicinoid derivatives selectively under slightly acidic tumor-associated conditions, ensuring tumor-targeted delivery of the compounds. The design of the prodrugs is addressed to pH-triggered release of active compounds in the slight acidic media, that corresponds to tumor microenvironment, while keeping sufficient stability of the whole formulation at physiological pH. Correlations between the structure of the conjugates, their hydrolytic stability, colloidal stability, ability of the prodrug retention in the lipid bilayer are described. Several formulations were found promising for further development and in vivo investigations.
RESUMEN
The direct synthesis of methanol via the hydrogenation of CO2, if performed efficiently and selectively, is potentially a powerful technology for CO2 mitigation. Here, we develop an active and selective Cu-Zn/SiO2 catalyst for the hydrogenation of CO2 by introducing copper and zinc onto dehydroxylated silica via surface organometallic chemistry and atomic layer deposition, respectively. At 230 °C and 25 bar, the optimized catalyst shows an intrinsic methanol formation rate of 4.3 g h-1 gCu-1 and selectivity to methanol of 83%, with a space-time yield of 0.073 g h-1 gcat-1 at a contact time of 0.06 s g mL-1. X-ray absorption spectroscopy at the Cu and Zn K-edges and X-ray photoelectron spectroscopy studies reveal that the CuZn alloy displays reactive metal support interactions; that is, it is stable under H2 atmosphere and unstable under conditions of CO2 hydrogenation, indicating that the dealloyed structure contains the sites promoting methanol synthesis. While solid-state nuclear magnetic resonance studies identify methoxy species as the main stable surface adsorbate, transient operando diffuse reflectance infrared Fourier transform spectroscopy indicates that µ-HCOO*(ZnOx) species that form on the Cu-Zn/SiO2 catalyst are hydrogenated to methanol faster than the µ-HCOO*(Cu) species that are found in the Zn-free Cu/SiO2 catalyst, supporting the role of Zn in providing a higher activity in the Cu-Zn system.
RESUMEN
We have developed a new method for promoter sequence classification based on a genetic algorithm and the MAHDS sequence alignment method. We have created four classes of human promoters, combining 17,310 sequences out of the 29,598 present in the EPD database. We searched the human genome for potential promoter sequences (PPSs) using dynamic programming and position weight matrices representing each of the promoter sequence classes. A total of 3,065,317 potential promoter sequences were found. Only 1,241,206 of them were located in unannotated parts of the human genome. Every other PPS found intersected with either true promoters, transposable elements, or interspersed repeats. We found a strong intersection between PPSs and Alu elements as well as transcript start sites. The number of false positive PPSs is estimated to be 3 × 10-8 per nucleotide, which is several orders of magnitude lower than for any other promoter prediction method. The developed method can be used to search for PPSs in various eukaryotic genomes.
Asunto(s)
Genoma Humano , Humanos , Elementos Alu/genética , Bases de Datos Factuales , Elementos Transponibles de ADN/genéticaRESUMEN
A four-step semisynthetic approach towards a highly versatile allocolchicine-related chiral aryne intermediate starting from naturally occurring colchicine was developed, and some of its synthetic transformations were studied. The in situ generated benzyne intermediate afforded a number of non-racemic heterocyclic allocolchicinoids, which were shown to exhibit potent cytotoxicity towards COLO 357, OSA and Raji cells. The proposed methodology is attractive for the synthesis of libraries of new cytotoxic tubulin inhibitors.
RESUMEN
We report herein an unusual one-pot preparation of α-benzyl-substituted conjugated enals via ZnCl2/LiCl/H2O-mediated transformation of styrenes. On the basis of experimental and computational studies, an underlying mechanism including electrophilic addition and hydride transfer with iminium cations has been proposed. The effect of the LiCl/ZnCl2/H2O combination on the reaction yield has been studied, demonstrating their participation in the activation and the key isomerization of an iminium electrophile.
Asunto(s)
Ácidos de Lewis , Estirenos , Cloruro de LitioRESUMEN
Large peptide biosynthesis is a valuable alternative to conventional chemical synthesis. Enfuvirtide, the largest therapeutic peptide used in HIV infection treatment, was synthesized in our thermostable chaperone-based peptide biosynthesis system and evaluated for peptide quality as well as the profile of process-related impurities. Host cell proteins (HCPs) and BrCN cleavage-modified peptides were evaluated by LC-MS in intermediate. Cleavage modifications during the reaction were assessed after LC-MS maps were aligned by simple in-house algorithm and formylation/oxidation levels were estimated. Circular dichroism spectra of the obtained enfuvirtide were compared to the those of the chemically- synthesized standard product. Final-product endotoxin and HCPs content were assessed resulting 1.06 EU/mg and 5.58 ppm respectively. Peptide therapeutic activity was measured using the MT-4 cells HIV infection-inhibition model. The biosynthetic peptide IC50 was 0.0453 µM while the standard one had 0.0180 µM. Non-acylated C-terminus was proposed as a cause of IC50 and CD spectra difference. Otherwise, the peptide has met all the requirements of the original chemically synthesized enfuvirtide in the cell-culture and in vivo experiments.
Asunto(s)
Inhibidores de Fusión de VIH , Infecciones por VIH , Humanos , Enfuvirtida/farmacología , Infecciones por VIH/tratamiento farmacológico , Fragmentos de Péptidos/química , Proteína gp41 de Envoltorio del VIH/química , Inhibidores de Fusión de VIH/farmacología , Péptidos/químicaRESUMEN
Methylotrophic yeasts such as Ogataea polymorpha and Komagataella phaffii (sin. Hansenula polymorpha and Pichia pastoris, respectively) are commonly used in basic research and biotechnological applications, frequently those requiring genome modifications. However, the CRISPR-Cas9 genome editing approaches reported for these species so far are relatively complex and laborious. In this work we present an improved plasmid vector set for CRISPR-Cas9 genome editing in methylotrophic yeasts. This includes a plasmid encoding Cas9 with a nuclear localization signal and plasmids with a scaffold for the single guide RNA (sgRNA). Construction of a sgRNA gene for a particular target sequence requires only the insertion of a 24 bp oligonucleotide duplex into the scaffold. Prior to yeast transformation, each plasmid is cleaved at two sites, one of which is located within the selectable marker, so that the functional marker can be restored only via recombination of the Cas9-containing fragment with the sgRNA gene-containing fragment. This recombination leads to the formation of an autonomously replicating plasmid, which can be lost from yeast clones after acquisition of the required genome modification. The vector set allows the use of G418-resistance and LEU2 auxotrophic selectable markers. The functionality of this setup has been demonstrated in O. polymorpha, O. parapolymorpha, O. haglerorum and Komagataella phaffii.