RESUMEN
Background: This PICO-guided systematic review assessed continuous lateral rotation therapy (CLRT) versus conventional position changes in mechanically ventilated critically ill adults, evaluating mortality, intensive care unit (ICU) and hospital stay duration as primary outcomes, and respiratory function, mechanical ventilation duration, pulmonary complications, and adverse events, as secondary outcomes. Methods: A systematic review followed PRISMA criteria (PROSPERO CRD42022384258). Searches spanned databases: MEDLINE/PubMed, EMBASE, Scopus, ScienceDirect, Cochrane, CINAHL and Web of Science, without language or publication year restrictions. Inclusion criteria involved randomized (RCT) and quasi-randomized trials, comparing CLRT (intervention) with conventional position changes (control). Risk of bias and quality of evidence for RCTs were assessed using the Cochrane collaboration and GRADE tools. For the quasi-randomized trials, the ROBINS-I tool was used. Results: In 18 studies with 1.466 participants (intervention, n= 700, 47.7%; control, n= 766, 52.2%), CLRT was predominantly used for prophylactic purposes, with protocols varying from 10 to 24 hours/day. Meta-analysis (16 RCTs) favored CLRT for reduced mechanical ventilation duration (SMD -0.17 days, CI -0.29 to -0.04, p=0.008) and lower nosocomial pneumonia incidence (OR 0.39, CI 0.29 to 0.52, p<0.00001). CLRT showed no significant impact on mortality (OR 1.04, CI 0.80 to 1.34, p= 0.77), ICU stay (SMD -0.11 days, CI -0.25 to 0.02, p= 0.11), hospital stay (SMD -0.10 days, CI -0.31 to 0.11, p= 0.33) and incidence of pressure ulcers (OR 0.73, CI 0,34 to 1.60, p= 0.44). Conclusions: CLRT showed no significant difference in primary outcomes (mortality, ICU, and hospital stay duration) but revealed significant differences in secondary outcomes (consistently reduced nosocomial pneumonia, with a minor effect on MV duration), supported by moderate certainty. Very low certainty for other outcomes highlights the need for current studies in diverse clinical settings and protocols to assess CLRT effectiveness.
RESUMEN
Objective.Brain-computer interfaces (BCIs) have the potential to reinstate lost communication faculties. Results from speech decoding studies indicate that a usable speech BCI based on activity in the sensorimotor cortex (SMC) can be achieved using subdurally implanted electrodes. However, the optimal characteristics for a successful speech implant are largely unknown. We address this topic in a high field blood oxygenation level dependent functional magnetic resonance imaging (fMRI) study, by assessing the decodability of spoken words as a function of hemisphere, gyrus, sulcal depth, and position along the ventral/dorsal-axis.Approach.Twelve subjects conducted a 7T fMRI experiment in which they pronounced 6 different pseudo-words over 6 runs. We divided the SMC by hemisphere, gyrus, sulcal depth, and position along the ventral/dorsal axis. Classification was performed on in these SMC areas using multiclass support vector machine (SVM).Main results.Significant classification was possible from the SMC, but no preference for the left or right hemisphere, nor for the precentral or postcentral gyrus for optimal word classification was detected. Classification while using information from the cortical surface was slightly better than when using information from deep in the central sulcus and was highest within the ventral 50% of SMC. Confusion matrices where highly similar across the entire SMC. An SVM-searchlight analysis revealed significant classification in the superior temporal gyrus and left planum temporale in addition to the SMC.Significance.The current results support a unilateral implant using surface electrodes, covering the ventral 50% of the SMC. The added value of depth electrodes is unclear. We did not observe evidence for variations in the qualitative nature of information across SMC. The current results need to be confirmed in paralyzed patients performing attempted speech.
Asunto(s)
Interfaces Cerebro-Computador , Imagen por Resonancia Magnética , Corteza Sensoriomotora , Habla , Adulto , Femenino , Humanos , Masculino , Análisis de Datos , Electrodos Implantados , Movimiento (Física) , Parálisis , Prótesis e Implantes , Corteza Sensoriomotora/anatomía & histología , Corteza Sensoriomotora/fisiología , Habla/fisiología , Máquina de Vectores de Soporte , Lóbulo Temporal/anatomía & histología , Lóbulo Temporal/fisiología , Mapeo EncefálicoAsunto(s)
Broncoscopía , Sarcoidosis Pulmonar , Sarcoidosis , Humanos , Sarcoidosis Pulmonar/diagnóstico , Broncoscopía/métodos , Sarcoidosis/diagnóstico , Femenino , Masculino , Tomografía Computarizada por Rayos X/métodos , Enfermedades Bronquiales/diagnóstico , Persona de Mediana Edad , Bronquios/patología , Bronquios/diagnóstico por imagen , AdultoRESUMEN
Ceratocystis fimbriata is a destructive fungal pathogen of sweetpotato (Ipomoea batatas) that leads to losses at all stages of sweetpotato production. Accurate detection of C. fimbriata would allow for more efficient deployment of management tactics in sweetpotato production. To develop a diagnostic assay, a hybrid genome assembly of C. fimbriata isolate AS236 was generated. The resulting 31.7-MB assembly was near-chromosome level, with 18 contigs, 6,481 predicted genes, and a BUSCO completion score of 98.4% when compared with the fungus-specific lineage database. Additional Illumina DNA reads from C. manginecans, C. platani, and a second C. fimbriata isolate (C1421) were then mapped to the assembled genome using BOWTIE2 and counted using HTSeq, which identified 148 genes present only within C. fimbriata as molecular diagnostic candidates; 6 single-copy and 35 highly multi-copy (>40 BLAST hits), as determined through a self-BLAST-P alignment. Primers for PCR were designed in the 200-bp flanking region of the first exon for each candidate, and the candidates were validated against a diverse DNA panel containing Ceratocystis species, sweetpotato pathogens, and plants. After validation, two diagnostic candidates amplified only C. fimbriata DNA and were considered to be highly specific to the species. These genetic markers will serve as valuable diagnostic tools with multiple applications including the detection of C. fimbriata in seed, soil, and wash water in sweetpotato production.
Asunto(s)
Ascomicetos , Genoma Fúngico , Ipomoea batatas , Enfermedades de las Plantas , Ipomoea batatas/microbiología , Enfermedades de las Plantas/microbiología , Ascomicetos/genética , Ascomicetos/aislamiento & purificación , Genoma Fúngico/genética , Análisis de Secuencia de ADN , ADN de Hongos/genéticaRESUMEN
Abstract Anticarsia gemmatalis Hünber, 1818 is one of the main defoliating species in the soybean crop. Bacillus thuringiensis Berliner, 1915, is a bacterium used in the biological control of this pest species. Resistant populations and their sublethal effects caused by the use of the bacteria have already been reported; however, there are no studies on phenotypic plasticity in adulthood exposed to Bt-based bioinsecticide sub-doses. This study aimed to evaluate the morphometry of A. gemmatalis adults under laboratory conditions submitted to the Bt-based bioinsecticide Dipel® over the three generations. The body segments mensuread were width, length, and area of the anterior and posterior wings, the weight of the integument, chest, abdomen, wings, and the whole adult of males and females. Among the treatments, LC5 in the first generation and LC10 in the second generation were those with lower thresholds in relation to the weight of the chest and abdomen, considering the proportions of the body smaller than the females. The females weight adulthood was reduced by 10% about males, and, only in the first generation. Males have larger body size and more pronounced phenotypic plasticity than females. Here, we demonstrate the first study assessing the phenotypic plasticity of A. gemmatalis adults.
Resumo Anticarsia gemmatalis Hünber, 1818 é uma das principais espécies desfolhadoras da cultura da soja. Bacillus thuringiensis Berliner, 1915, é uma bactéria utilizada no controle biológico dessa espécie de praga. Populações resistentes e seus efeitos subletais causados pelo uso da bactéria já foram relatados, no entanto, não há estudos sobre a plasticidade fenotípica na idade adulta exposta a subdoses de bioinseticida à base de Bt. Este trabalho teve como objetivo avaliar a morfometria de adultos de A. gemmatalis em condições de laboratório submetidos ao bioinseticida Dipel® ao longo de três gerações. Os segmentos corporais mensuráveis eram largura, comprimento e área das asas anterior e posterior, o peso do tegumento, tórax, abdômen, asas e todo o adulto de machos e fêmeas. Dentre os tratamentos, CL5 na primeira geração e CL10 na segunda geração foram aqueles com limiares mais baixos em relação ao peso do tórax e abdômen, considerando as proporções do corpo menores que as do sexo feminino. O peso da fêmea na idade adulta foi reduzido em 10% em relação aos machos e, apenas na primeira geração. Os machos têm tamanho corporal maior e plasticidade fenotípica mais pronunciada do que as fêmeas. Este estudo demonstra o primeiro estudo avaliando a plasticidade fenotípica de adultos de A. gemmatalis.
RESUMEN
Anticarsia gemmatalis Hünber, 1818 is one of the main defoliating species in the soybean crop. Bacillus thuringiensis Berliner, 1915, is a bacterium used in the biological control of this pest species. Resistant populations and their sublethal effects caused by the use of the bacteria have already been reported; however, there are no studies on phenotypic plasticity in adulthood exposed to Bt-based bioinsecticide sub-doses. This study aimed to evaluate the morphometry of A. gemmatalis adults under laboratory conditions submitted to the Bt-based bioinsecticide Dipel® over the three generations. The body segments mensuread were width, length, and area of the anterior and posterior wings, the weight of the integument, chest, abdomen, wings, and the whole adult of males and females. Among the treatments, LC5 in the first generation and LC10 in the second generation were those with lower thresholds in relation to the weight of the chest and abdomen, considering the proportions of the body smaller than the females. The female's weight adulthood was reduced by 10% about males, and, only in the first generation. Males have larger body size and more pronounced phenotypic plasticity than females. Here, we demonstrate the first study assessing the phenotypic plasticity of A. gemmatalis adults.
Anticarsia gemmatalis Hünber, 1818 é uma das principais espécies desfolhadoras da cultura da soja. Bacillus thuringiensis Berliner, 1915, é uma bactéria utilizada no controle biológico dessa espécie de praga. Populações resistentes e seus efeitos subletais causados pelo uso da bactéria já foram relatados, no entanto, não há estudos sobre a plasticidade fenotípica na idade adulta exposta a subdoses de bioinseticida à base de Bt. Este trabalho teve como objetivo avaliar a morfometria de adultos de A. gemmatalis em condições de laboratório submetidos ao bioinseticida Dipel® ao longo de três gerações. Os segmentos corporais mensuráveis eram largura, comprimento e área das asas anterior e posterior, o peso do tegumento, tórax, abdômen, asas e todo o adulto de machos e fêmeas. Dentre os tratamentos, CL5 na primeira geração e CL10 na segunda geração foram aqueles com limiares mais baixos em relação ao peso do tórax e abdômen, considerando as proporções do corpo menores que as do sexo feminino. O peso da fêmea na idade adulta foi reduzido em 10% em relação aos machos e, apenas na primeira geração. Os machos têm tamanho corporal maior e plasticidade fenotípica mais pronunciada do que as fêmeas. Este estudo demonstra o primeiro estudo avaliando a plasticidade fenotípica de adultos de A. gemmatalis.
Asunto(s)
Animales , Fenotipo , Glycine max , Bacillus thuringiensis , Control Biológico de VectoresRESUMEN
In this work we report on the results of the total K-shell X-ray production cross sections of Ti, Cr, Ni and Zn induced by Cl4+ and Cl5+ ions with energies ranging from 4 MeV to 10 MeV. The experimental results were compared with Atomic Orbitals Coupled-Channels (CC) calculations based on the independent electron model. The experimental X-ray production cross sections vary from about 10-2 barns for Zn up to 102 barns for Ti. The results obtained for Ti indicate that the present CC calculations underestimate the experimental cross sections up to two orders of magnitude at 10 MeV chlorine bombarding energy. However, the discrepancy between CC calculations and experimental results decreases as both bombarding energy and the atomic number of the target species increase. The dependency of the experiment-theory agreement on the asymmetry and adiabaticity parameters α and η respectively is discussed.
RESUMEN
INTRODUCTION: Set-up skin markings are performed, in several centers, for radiotherapy (RT) treatments. This study aimed to compare two permanent methods: lancets and an electric marking pen, the Comfort Marker 2.0® (CM). METHODS: This was a prospective, unicentric, randomized study. Patients aged 18 years or older referred to our department to receive RT were recruited. Patients were randomly assigned, in a 1:1 ratio, to receive set-up markings using lancets or CM. The markings arrangement followed our departmental protocols. The coprimary endpoints were patients' comfort and effectiveness. Secondary endpoints included radiation therapists (RTTs) satisfaction and cosmesis. RESULTS: Between October 2021 and January 2022, 100 patients were enrolled (50 received lancets and 50 CM) and assessed for the comfort and satisfaction outcomes. CM was significantly less painful than the lancets, with 44% and 16% of the patients, respectively, considering the tattooing process painless (RR = 2.75; 95% IC: 1.36 - 5.58). On the RTT-reported satisfaction, CM had significantly easier processes than lancets (98.0% vs. 78.0%, respectively; RR = 1.26; 95% CI: 1.08 - 1.46). For effectiveness and cosmesis assessment, 98 patients were analyzed (48 received lancets and 50 CM). Patients receiving CM had a significantly higher proportion of markings graded as good and excellent compared to those receiving lancets (98.0% and 50.0%, respectively, had ≥75% of the tattoos assessed as good/excellent, RR = 1.96; 95% CI: 1.47 - 2.61). On the cosmetic evaluation, patients receiving CM had significantly better cosmetic markings, with a median score of 4.4 (vs. 3.5 for lancets, p <0.001). CONCLUSION: The trial results demonstrated that tattooing with the CM is significantly less painful, more effective, easier to apply, and cosmetically superior to tattooing with lancets. IMPLICATIONS FOR PRACTICE: Tattooing with CM allows for better results regarding pain, quality, ease and cosmesis.
Asunto(s)
Tatuaje , Humanos , Estudios Prospectivos , Tatuaje/métodosRESUMEN
Anticarsia gemmatalis Hünber, 1818 is one of the main defoliating species in the soybean crop. Bacillus thuringiensis Berliner, 1915, is a bacterium used in the biological control of this pest species. Resistant populations and their sublethal effects caused by the use of the bacteria have already been reported; however, there are no studies on phenotypic plasticity in adulthood exposed to Bt-based bioinsecticide sub-doses. This study aimed to evaluate the morphometry of A. gemmatalis adults under laboratory conditions submitted to the Bt-based bioinsecticide Dipel® over the three generations. The body segments mensuread were width, length, and area of the anterior and posterior wings, the weight of the integument, chest, abdomen, wings, and the whole adult of males and females. Among the treatments, LC5 in the first generation and LC10 in the second generation were those with lower thresholds in relation to the weight of the chest and abdomen, considering the proportions of the body smaller than the females. The female's weight adulthood was reduced by 10% about males, and, only in the first generation. Males have larger body size and more pronounced phenotypic plasticity than females. Here, we demonstrate the first study assessing the phenotypic plasticity of A. gemmatalis adults.
Asunto(s)
Bacillus thuringiensis , Mariposas Nocturnas , Adaptación Fisiológica , Animales , Femenino , Proteínas Hemolisinas/farmacología , Masculino , Glycine maxAsunto(s)
Neumotórax , Edema Pulmonar , Drenaje , Humanos , Oxígeno/uso terapéutico , Edema Pulmonar/terapiaRESUMEN
AIM: To compare six reciprocating instruments regarding their geometric design, metallurgical characteristics, mechanical behaviour and ability to prepare root canals. METHODOLOGY: A total of 246 new 25-mm NiTi instruments (41 per group) from six reciprocating systems (Reciproc, Reciproc Blue, One Files, One Files Blue, Reverso Silver, and WaveOne Gold) were evaluated throughout a multimethod approach regarding their design using stereomicroscopy (number of blades and helix angle) and scanning electron microscopy (blades symmetry, cross section and surface finishing), nickel-titanium composition, phase transformation temperatures, mechanical performance (cyclic fatigue, torsional and bending resistance) and unprepared canal surface area on anatomically matched mandibular molars assessed by micro-CT. One-way ANOVA and post hoc Tukey's or Mood's median tests were selected depending on sample distribution with significance level set at 5%. RESULTS: The instruments had similarities regarding their metal composition and unprepared canal area, whilst differences in phase transformation temperatures and geometric design (number of blades, surface finishing and tip geometry) were observed. Overall, no difference was observed regarding the maximum torque values (P > 0.05), whilst One Files (72 s) and One Files Blue (414 s) had the shortest and longest times to fracture, respectively (P < 0.05). Similar angles of rotation were observed in Reciproc (310°), One Files (285°) and Reverso Silver (318°) instruments (P > 0.05), which were significantly lower than Reciproc Blue (492°), One Files Blue (456°) and WaveOne Gold (492°; P < 0.05). Maximum bending load demonstrated that Reciproc Blue (201.3 gf) was significantly more flexible that the other instruments (P < 0.05). CONCLUSION: Although there were similarities in metal composition and percentage of unprepared canal surface, the instruments had differences in the overall geometric design, phase transformation temperatures and in the four mechanical resistance parameters (time to fracture, maximum torque, angle of rotation and maximum bending load).
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular , Diseño de Equipo , Ensayo de Materiales , Estrés MecánicoRESUMEN
The diagnosis and treatment of bipolar depression (BDep) poses complex clinical challenges for psychiatry. Proton magnetic resonance spectroscopy (1H-MRS) is a useful imaging tool for investigating in vivo levels of brain neuro-metabolites, critical to understanding the process of mood dysregulation in Bipolar Disorder. Few studies have evaluated longitudinal clinical outcomes in BDep associated with 1H-MRS metabolic changes. This study aimed to longitudinally assess brain 1H-MRS metabolites in the anterior cingulate cortex (ACC) correlated with improvement in depression (from BDep to euthymia) after lithium treatment in BDep patients versus matched healthy controls (HC). Twenty-eight medication-free BDep patients and 28 HC, matched for age and gender, were included in this study. All subjects were submitted to a 3-Tesla brain 1H-MRS scan in the ACC using a single-voxel (8cm3) PRESS sequence at baseline. At follow-up (6 weeks), 14 BDep patients repeated the exam in euthymia. Patients with current BDep had higher baseline Myo-inositol/Cr (mI/Cr) and Choline/Cr (Cho/Cr) compared to HC. After six weeks, mI/Cr or Cho/Cr levels in subjects that achieved euthymia no longer differed to levels in HC, while high Cho/Cr levels persisted in non-responders . Elevated ACC mI/Cr and Cho/Cr in BDep might indicate increased abnormal membrane phospholipid metabolism and phosphatidylinositol (PI) cycle activity. Return of mI/Cr and Cho/Cr to normal levels after lithium-induced euthymia suggests a critical regulatory effect of lithium targeting the PI cycle involved in mood regulation.
Asunto(s)
Trastorno Bipolar , Ácido Aspártico/metabolismo , Trastorno Bipolar/diagnóstico por imagen , Trastorno Bipolar/tratamiento farmacológico , Encéfalo/metabolismo , Colina/metabolismo , Colina/farmacología , Colina/uso terapéutico , Creatina/metabolismo , Giro del Cíngulo/metabolismo , Humanos , Inositol/metabolismo , Litio/uso terapéutico , Espectroscopía de Protones por Resonancia Magnética/métodosRESUMEN
OBJECTIVE: Healthcare workers are at risk for COVID-19 contamination. It is important to protect them in order to reduce nosocomial transmission and maintain the assistance capacity of health systems. To evaluate the diagnostic test and retest strategy with RT-PCR for SARS-CoV-2 and factors associated with the diagnosis of COVID-19 among healthcare workers. PATIENTS AND METHODS: Cross-sectional study carried out in a Brazilian hospital. From April 27 to June 16, 2020, symptomatic healthcare workers underwent an RT-PCR test on upper respiratory tract specimens as soon as possible and, if negative, it was repeated close to the 5th day of symptom evolution. Working areas were divided into assistance areas dedicated or not dedicated to COVID-19 and non-assistance areas. The type of activity was divided into assistance or non-assistance activity. RESULTS: 775 individuals were evaluated. 114 were diagnosed with COVID-19, of whom 101 followed the testing protocol. A second RT-PCR identified five (4.9%) of the positive cases. Working in an area dedicated to patients with COVID-19 was more prevalent among positive cases (35.1% x 19.8%, p=0.001) as well as working in an assistance activity (80.7% x 70.8%, p=0.031). CONCLUSIONS: A second RT-PCR test after the 5th day of symptom evolution showed limited diagnostic improvement. The adoption of a single test-based strategy, carried out at the right time after the onset of symptoms, allows the optimal use of resources. Working in a COVID-19 dedicated area and in direct contact with patients is related to a higher prevalence of COVID-19 among symptomatic healthcare workers.
Asunto(s)
Prueba de Ácido Nucleico para COVID-19/métodos , COVID-19/diagnóstico , Personal de Salud , Adulto , Brasil/epidemiología , COVID-19/epidemiología , COVID-19/fisiopatología , Progresión de la Enfermedad , Femenino , Humanos , Transmisión de Enfermedad Infecciosa de Paciente a Profesional , Masculino , Persona de Mediana Edad , Prevalencia , SARS-CoV-2 , Factores de TiempoRESUMEN
AIM: To compare the ProTaper Next (PTN) system with a replica-like and a counterfeit system regarding design, metallurgy, mechanical performance and shaping ability. METHODOLOGY: Replica-like (X-File) and counterfeit (PTN-CF) instruments were compared to the PTN system regarding design (microscopy), phase transformation temperatures (differential scanning calorimetry), nickel-titanium ratio (energy-dispersive X-ray spectroscopy), cyclic fatigue, torsional resistance, bending strength, and untouched canal areas in extracted mandibular molars (micro-CT). anova, post hoc Tukey's and Kruskal-Wallis tests were used according to normality assessment (Shapiro-Wilk test) with the significance level set at 5%. RESULTS: Overall similarities in design and nickel-titanium (Ni/Ti) ratio were observed amongst instruments with the X-File having a smoother surface finish. PTN and PTN-CF had mixed austenite plus R-phase (R-phase start approximately at 45 ºC and near 30 ºC, respectively), whilst X-File instruments were austenitic (R-phase started at approximately at 17 ºC) at room temperature (20 ºC). PTN-CF had the greatest inconsistency in the phase transformation temperatures. Time to fracture of PTN-CF X2 and X3 was significantly shorter than PTN and X-File instruments (P < 0.05), whilst no difference was noted in maximum torque to fracture amongst the tested systems (P > 0.05). X-Files and PTN-CF had a stress-induced phase change during bending load. Mean unprepared surface areas of root canals were 25.8% (PTN), 31.1% (X-File) and 32.5% (PTN-CF) with no significant difference amongst groups (P > 0.05). CONCLUSION: Similarities amongst the systems were noted in the Ni/Ti ratio and maximum torque to fracture, whilst differences were observed in the design, phase transformation temperatures and mechanical behaviour. The ProTaper Next counterfeit instruments could be considered as the less secure system considering its low-cyclic fatigue resistance. Apart from these differences, the unprepared canal surface areas, obtained with the tested systems, were similar.