RESUMEN
Herein, we demonstrate an easy way to improve the hydrogen evolution reaction (HER) activity of Pt electrodes in alkaline media by introducing Ni-Fe clusters. As a result, the overpotential needed to achieve a current density of 10â mA cm-2 in H2 -saturated 0.1 m KOH is reduced for the model single-crystal electrodes down to about 70â mV. To our knowledge, these modified electrodes outperform any other reported electrocatalysts tested under similar conditions. Moreover, the influence of 1)â Ni to Fe ratio, 2)â cluster coverage, and 3)â the nature of the alkali-metal cations present in the electrolyte on the HER activity has been investigated. The observed catalytic performance likely originates from both the improved water dissociation at the Ni-Fe clusters and the subsequent optimal hydrogen adsorption and recombination at Pt atoms present at the Ni-Fe/Pt boundary.
RESUMEN
Cost is a major drawback that limits the industrial-scale hydrogen production through water electrolysis. The overall cost of this technology can be decreased by coupling the electrosynthesis of value-added chemicals at the anode side with electrolytic hydrogen generation at the cathode. This Minireview provides a directory of anodic oxidation reactions that can be combined with cathodic hydrogen generation. The important parameters for selecting the anodic reactions, such as choice of catalyst material and its selectivity towards specific products are elaborated in detail. Furthermore, various novel electrolysis cell architectures for effortless separation of value-added products from hydrogen gas are described.
RESUMEN
Metal-organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a "strain modulation" approach has been applied through the use of surface-mounted NiFe-MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200â mA cm-2 at an overpotential of only ≈210â mV. It demonstrates operational long-term stability even at a high current density of 500â mA cm-2 and exhibits the so far narrowest "overpotential window" ΔEORR-OER of 0.69â V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.
RESUMEN
Heterogeneous electrocatalysis plays a central role in the development of sustainable, carbon-neutral pathways for energy provision and the production of various chemicals. It determines the overall efficiency of electrochemical devices that involve catalysis at the electrode/electrolyte interface. In this perspective, we discuss key aspects for the identification of active centers at the surface of electrocatalysts and important factors that influence them. The role of the surface structure, nanoparticle shape/size and the electrolyte composition in the resulting catalytic performance is of particular interest in this work. We highlight challenges that from our point of view need to be tackled, and provide guidelines for the design of "real life" electrocatalysts for renewable energy provision systems as well as for the production of industrially important compounds.
RESUMEN
High oxygen reduction (ORR) activity has been for many years considered as the key to many energy applications. Herein, by combining theory and experiment we prepare Pt nanoparticles with optimal size for the efficient ORR in proton-exchange-membrane fuel cells. Optimal nanoparticle sizes are predicted near 1, 2, and 3â nm by computational screening. To corroborate our computational results, we have addressed the challenge of approximately 1â nm sized Pt nanoparticle synthesis with a metal-organic framework (MOF) template approach. The electrocatalyst was characterized by HR-TEM, XPS, and its ORR activity was measured using a rotating disk electrode setup. The observed mass activities (0.87±0.14â A mgPt -1 ) are close to the computational prediction (0.99â A mgPt -1 ). We report the highest to date mass activity among pure Pt catalysts for the ORR within similar size range. The specific and mass activities are twice as high as the Tanaka commercial Pt/C catalysis.
RESUMEN
The oxygen reduction reaction (ORR) is of great interest for future sustainable energy conversion and storage, especially concerning fuel cell applications. The preparation of active, affordable, and scalable electrocatalysts and their application in fuel cell engines of hydrogen cars is a prominent step toward the reduction of air pollution, especially in urban areas. Alloying nanostructured Pt with lanthanides is a promising approach to enhance its catalytic ORR activity, whereby the development of a simple synthetic route turned out to be a nontrivial endeavor. Herein, for the first time, we present a successful single-step, scalable top-down synthetic route for Pt-lanthanide alloy nanoparticles, as witnessed by the example of Pr-alloyed Pt nanoparticles. The catalyst was characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and photoelectron spectroscopy, and its electrocatalytic oxygen reduction activity was investigated using a rotating disk electrode technique. Pt xPr/C showed â¼3.5 times higher [1.96 mA/cm2Pt, 0.9 V vs reversible hydrogen electrode (RHE)] specific activity and â¼1.7 times higher (0.7 A/mgPt, 0.9 V vs RHE) mass activity compared to commercial Pt/C catalysts. On the basis of previous findings and characterization of the Pt xPr/C catalyst, the activity improvement over commercial Pt/C originates from a lattice strain introduced by the alloying process.
RESUMEN
Development of efficient schemes of energy storage is crucial for finding a solution for the "generation versus consumption" problem. Aqueous Na-ion batteries have been already recognized as one of the promising candidates for large-scale energy-storage systems. Despite noticeable progress in this field, the actual intercalation mechanisms governing these battery cells are yet to be fully comprehended. In this manuscript, we examine the electrode/electrolyte interface formed between electrodeposited Na2Co[Fe(CN)6] films and aqueous solutions. The investigated systems exhibit up to three potentials of maximum entropy (PMEs). To the best of our knowledge, the existence of multiple PMEs in electrochemical systems has never been reported in the literature. These unexpected results are, however, in line with the theory explaining the correlation between the water structure at the interface and the ease of the interfacial mass and charge transfer. Additionally, the obtained PMEs appear to largely depend on the anions' properties, most probably on the hydration energy of these species. This reveals the impact of the electrolyte composition on the interfacial processes in Na-ion batteries.
RESUMEN
Identification and characterization of novel battery electrode materials are key factors in transitioning the grids to renewable energy provision. Given the scale of the challenge, special attention should be paid to safety and availability of resources. This paper presents a new electrode material for aqueous batteries and supercapacitors based on highly available resources: chromium(II) hexacyanoferrate (CrHCF) thin films. Electrodeposited CrHCF exhibited "half-charge" potentials (E 1/2) of â¼0.69 and â¼0.72 V versus silver/silver chloride (reference electrode) for Na and K intercalation, respectively, a high specific capacity of â¼88 mA h/g (10 C), and a good rate performance at fast C-rate (360 C). The electrolyte composition significantly influences the long-term cycling stability of the CrHCF electrodes and the choice of the intercalating alkali metal cations significantly impacts the E 1/2 potentials. Finally, a CrHCF-based symmetric cell (quasi-supercapacitor) was constructed and showed high specific energy of â¼4.6 W h/kg at 100 C.