A modern look at a medieval bilayer metal leaf: nanotomography of Zwischgold.

Many European sculptures and altarpieces from the Middle Ages were decorated with Zwischgold, a bilayer metal leaf with an ultra-thin gold face backed by silver. Zwischgold corrodes quickly when exposed to air, causing the surface of the artefact to darken and lose gloss. The conservation of such Zwischgold applied artefacts has been an obstinate problem. We have acquired quantitative, 3D nanoscale images of Zwischgold samples from 15th century artefacts and modern materials using ptychographic X-ray computed tomography (PXCT), a recently developed coherent diffractive imaging technique, to investigate the leaf structure and chemical state of Zwischgold. The measurements clearly demonstrate decreasing density (increasing porosity) of the leaf materials and their corrosion products, as well as delamination of the leaves from their substrate. Each of these effects speak to typically observed issues in the conservation of such Zwischgold applied artefacts. Further, a rare variant of Zwischgold that contains extremely thin multiple gold layers and an overlapping phenomenon of Zwischgold with other metal leaves are observed through PXCT. As supportive data, scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray analysis (EDX) were performed on the medieval samples.

Seeing structural evolution of organic molecular nano-crystallites using 4D scanning confocal electron diffraction (4D-SCED).

Direct observation of organic molecular nanocrystals and their evolution using electron microscopy is extremely challenging, due to their radiation sensitivity and complex structure. Here, we introduce 4D-scanning confocal electron diffraction (4D-SCED), which enables direct in situ observation of bulk heterojunction (BHJ) thin films. 4D-SCED combines confocal electron optic setup with a pixelated detector to record focused spot-like diffraction patterns with high angular resolution, using an order of magnitude lower dose than previous methods. We apply it to study an active layer in organic solar cells, namely DRCN5T:PC71BM BHJ thin films. Structural details of DRCN5T nano-crystallites oriented both in- and out-of-plane are imaged at ~5 nm resolution and dose budget of ~5 e-/Å2. We use in situ annealing to observe the growth of the donor crystals, evolution of the crystal orientation, and progressive enrichment of PC71BM at interfaces. This highly dose-efficient method opens more possibilities for studying beam sensitive soft materials.

Exploring the Preparation Dependence of Crystalline 2D-Extended Ultrathin C8-BTBT-C8 Films.

Crystalline organic semiconducting thin films from the benchmark molecule C8-BTBT-C8 were obtained using physical vapor deposition and various solution-based methods. Utilizing atomic force microscopy and X-ray spectromicroscopy, we illustrate the influence of the underlying growth mechanism and determine the highly preparation-dependent orientation of the thiophene backbone. We observe a continuous trend for crystalline C8-BTBT-C8 thin film domains to extend into the square millimeter-range under near-equilibrium growth conditions. For such well-defined systems, electron diffraction tomography allows us to precisely determine the unit cell directly after film deposition and to reveal an 8° molecular tilt angle with respect to the surface normal. This finding is in almost perfect accordance with the values derived from near-edge X-ray absorption fine structure linear dichroism. Within this work, we shine a light on both the successes and challenges connected to the realization of potent, thiophene-based semiconducting films, paving the way toward square centimeter-sized ultrathin organic crystals and their application in organic circuitry.

Structural characterization of α,ω-DH6T monolayer films grown at the liquid-liquid interface.

The molecular self-organization of α,ω-dihexylsexithiophene (α,ω-DH6T) monolayers prepared at the solvent-water interface is investigated by complementary microscopy techniques. Our study focuses on the influence of solvents and initial droplet volume on the resulting film morphology. Long-range extended domains in the monolayer regime are detected by visible light microscopy only for toluene. Small-area electron diffraction (SAED) proves the formation of single-crystalline monolayers with structural parameters identical to the organic bulk crystals. In comparison with conventional vacuum sublimated thin films a deviant molecular orientation, derived from near-edge-X-ray absorption fine structure (NEXAFS) in combination with a lower step height measured by atomic-force-microscopy (AFM), indicates a different behaviour of the flexible terminal hexyl chains during growth in a liquid surrounding. Furthermore, a structural degradation over time is observed which is caused by residual solvent molecules that are incorporated during the transfer procedure.

Tailored Solution-Based N-heterotriangulene Thin Films: Unravelling the Self-Assembly.

The ability of a series of bridged triarylamines, so-called N-heterotriangulenes, to form multilayer-type 2D-extended films via a solution-based processing method was examined using complementary microscopic techniques. We found that the long-range order, crystallinity, and layer thickness decisively depend on the nature of the substituents attached to the polycyclic backbone. Owing to their flat core unit, compounds exhibiting a carbonyl unit at the bridge position provide a superior building block as compared to thioketone-bridged derivatives. In addition, nature and length of the peripheral substituents affect the orientation of the aromatic core unit within highly crystalline films. Hence, our results stress the significance of a suitable molecular framework and provide deeper understanding of structure formation in 2D-confined surroundings for such compounds.

X-ray microscopy reveals the outstanding craftsmanship of Siberian Iron Age textile dyers.

The excellent craftsmanship of ancient Oriental and Central Asian textile dyers is already demonstrated in the remarkable brilliance and fastness of the colours of the so-called Pazyryk carpet, the by far oldest pile carpet found to date. This specimen resembles the advanced craftsmanship of Iron Age Central Asian textile production. We have employed synchrotron-based µ-XRF imaging to detect the distribution of metal organic pigments within individual fibres of the Pazyryk carpet (about 2500 years old) and compare the results to wool fibres, which we prepared according to traditional Anatolian dyeing recipes. We observe congruent pigment distribution within specimens from the Pazyryk carpet and natural wool fibres that we have fermented prior to dyeing. Therefore, we conclude that the superior fermentation technique has been utilized about 2000 years earlier than known so far.

From 2D STXM to 3D Imaging: Soft X-ray Laminography of Thin Specimens.

X-ray tomography has become an indispensable tool for studying complex 3D interior structures with high spatial resolution. Three-dimensional imaging using soft X-rays offers powerful contrast mechanisms but has seen limited success with tomography due to the restrictions imposed by the much lower energy of the probe beam. The generalized geometry of laminography, characterized by a tilted axis of rotation, provides nm-scale 3D resolution for the investigation of extended (mm range) but thin (µm to nm) samples that are well suited to soft X-ray studies. This work reports on the implementation of soft X-ray laminography (SoXL) at the scanning transmission X-ray spectromicroscope of the PolLux beamline at the Swiss Light Source, Paul Scherrer Institut, which enables 3D imaging of extended specimens from 270 to 1500 eV. Soft X-ray imaging provides contrast mechanisms for both chemical sensitivity to molecular bonds and oxidation states and magnetic dichroism due to the much stronger attenuation of X-rays in this energy range. The presented examples of applications range from functionalized nanomaterials to biological photonic crystals and sophisticated nanoscaled magnetic domain patterns, thus illustrating the wide fields of research that can benefit from SoXL.

Mepivacaine reduces calcium transients in isolated murine ventricular cardiomyocytes.

BACKGROUND: The potential mechanism of mepivacaine's myocardial depressant effect observed in papillary muscle has not yet been investigated at cellular level. Therefore, we evaluated mepivacaine's effects on Ca2+ transient in isolated adult mouse cardiomyocytes. METHODS: Single ventricular myocytes were enzymatically isolated from wild-type C57Bl/6 mice and loaded with 10 µM fluorescent Ca2+ indicator Fluo-4-AM to record intracellular Ca2+ transients upon electrical stimulation. The mepivacaine effects at half-maximal inhibitory concentration (IC50) was determined on calibrated cardiomyocytes' Ca2+ transients by non-parametric statistical analyses on biophysical parameters. Combination of mepivacaine with NCX blockers ORM-10103 or NiCl2 were used to test a possible mechanism to explain mepivacaine-induced Ca2+ transients' reduction. RESULTS: A significant inhibition at mepivacaine's IC50 (50 µM) on Ca2+ transients was measured in biophysical parameters such as peak (control: 528.6 ± 73.61 nM vs mepivacaine: 130.9 ± 15.63 nM; p < 0.05), peak area (control: 401.7 ± 63.09 nM*s vs mepivacaine: 72.14 ± 10.46 nM*s; p < 0.05), slope (control: 7699 ± 1110 nM/s vs mepivacaine: 1686 ± 226.6 nM/s; p < 0.05), time to peak (control: 107.9 ± 8.967 ms vs mepivacaine: 83.61 ± 7.650 ms; p < 0.05) and D50 (control: 457.1 ± 47.16 ms vs mepivacaine: 284.5 ± 22.71 ms; p < 0.05). Combination of mepivacaine with NCX blockers ORM-10103 or NiCl2 showed a significant increase in the baseline of [Ca2+] and arrhythmic activity upon electrical stimulation. CONCLUSION: At cellular level, mepivacaine blocks Na+ channels, enhancing the reverse mode activity of NCX, leading to a significant reduction of Ca2+ transients. These results suggest a new mechanism for the mepivacaine-reduction contractility effect.

Simulation Strategies for Calcium Microdomains and Calcium Noise.

In this article, we present an overview of simulation strategies in the context of subcellular domains where calcium-dependent signaling plays an important role. The presentation follows the spatial and temporal scales involved and represented by each algorithm. As an exemplary cell type, we will mainly cite work done on striated muscle cells, i.e. skeletal and cardiac muscle. For these cells, a wealth of ultrastructural, biophysical and electrophysiological data is at hand. Moreover, these cells also express ubiquitous signaling pathways as they are found in many other cell types and thus, the generalization of the methods and results presented here is straightforward.The models considered comprise the basic calcium signaling machinery as found in most excitable cell types including Ca2+ ions, diffusible and stationary buffer systems, and calcium regulated calcium release channels. Simulation strategies can be differentiated in stochastic and deterministic algorithms. Historically, deterministic approaches based on the macroscopic reaction rate equations were the first models considered. As experimental methods elucidated highly localized Ca2+ signaling events occurring in femtoliter volumes, stochastic methods were increasingly considered. However, detailed simulations of single molecule trajectories are rarely performed as the computational cost implied is too large. On the mesoscopic level, Gillespie's algorithm is extensively used in the systems biology community and with increasing frequency also in models of microdomain calcium signaling. To increase computational speed, fast approximations were derived from Gillespie's exact algorithm, most notably the chemical Langevin equation and the τ-leap algorithm. Finally, in order to integrate deterministic and stochastic effects in multiscale simulations, hybrid algorithms are increasingly used. These include stochastic models of ion channels combined with deterministic descriptions of the calcium buffering and diffusion system on the one hand, and algorithms that switch between deterministic and stochastic simulation steps in a context-dependent manner on the other. The basic assumptions of the listed methods as well as implementation schemes are given in the text. We conclude with a perspective on possible future developments of the field.

Hot electron injection into semiconducting polymers in polymer based-perovskite solar cells and their fate.

Metal halide perovskites are known to possess upon photoexcitation long-lived hot carriers. By using femtosecond laser transient absorption spectroscopy, we probed in the current work interfacial charge transfer, that is, hot electrons and holes in methylammonium lead iodide perovskite. The focus was, on the one hand, on titanium dioxide as an electron transporting material and, on the other hand, on several organic semiconducting materials as hole transporting materials in perovskite solar cells. An unexpected carrier loss pathway for hot electrons was found in the form of injection into the low lying LUMOs of several organic semiconducting materials. Of great importance is the fact that the final photocurrents of perovskite solar cells scale with the suppression of this newly discovered loss pathway.

Augmentation of myocardial If dysregulates calcium homeostasis and causes adverse cardiac remodeling.

HCN channels underlie the depolarizing funny current (If) that contributes importantly to cardiac pacemaking. If is upregulated in failing and infarcted hearts, but its implication in disease mechanisms remained unresolved. We generated transgenic mice (HCN4tg/wt) to assess functional consequences of HCN4 overexpression-mediated If increase in cardiomyocytes to levels observed in human heart failure. HCN4tg/wt animals exhibit a dilated cardiomyopathy phenotype with increased cellular arrhythmogenicity but unchanged heart rate and conduction parameters. If augmentation induces a diastolic Na+ influx shifting the Na+/Ca2+ exchanger equilibrium towards 'reverse mode' leading to increased [Ca2+]i. Changed Ca2+ homeostasis results in significantly higher systolic [Ca2+]i transients and stimulates apoptosis. Pharmacological inhibition of If prevents the rise of [Ca2+]i and protects from ventricular remodeling. Here we report that augmented myocardial If alters intracellular Ca2+ homeostasis leading to structural cardiac changes and increased arrhythmogenicity. Inhibition of myocardial If per se may constitute a therapeutic mechanism to prevent cardiomyopathy.

Determination of the Maximum Velocity of Filaments in the in vitro Motility Assay.

The in vitro motility assay (IVMA) is a powerful tool commonly used in basic muscle research and for drug screenings with the aim to find treatment options for neuromuscular disorders. In brief, the sliding movement of fluorescence-labeled actin filaments on myosin motor proteins is recorded, and the sliding velocity is analyzed via image analysis methods. Due to low signal-to-noise ratios and large variability in the velocity signal, accurate determination of the maximum sliding velocity is challenging. We introduce a new method and software program named Actin Phase Velocity (ActiPHV). The method extracts the maximum velocity from filament tracking data. Based on simulated and real reference data we show that our method yields a higher accuracy compared to previous methods. As a result, our method enables enhancing the sensitivity of the IVMA to better exploit its full potential.

Overcoming efficiency and stability limits in water-processing nanoparticular organic photovoltaics by minimizing microstructure defects.

There is a strong market driven need for processing organic photovoltaics from eco-friendly solvents. Water-dispersed organic semiconducting nanoparticles (NPs) satisfy these premises convincingly. However, the necessity of surfactants, which are inevitable for stabilizing NPs, is a major obstacle towards realizing competitive power conversion efficiencies for water-processed devices. Here, we report on a concept for minimizing the adverse impact of surfactants on solar cell performance. A poloxamer facilitates the purification of organic semiconducting NPs through stripping excess surfactants from aqueous dispersion. The use of surfactant-stripped NPs based on poly(3-hexylthiophene) / non-fullerene acceptor leads to a device efficiency and stability comparable to the one from devices processed by halogenated solvents. A record efficiency of 7.5% is achieved for NP devices based on a low-band gap polymer system. This elegant approach opens an avenue that future organic photovoltaics processing may be indeed based on non-toxic water-based nanoparticle inks.

Improved charge carrier dynamics in polymer/perovskite nanocrystal based hybrid ternary solar cells.

Here, brand new ternary hybrid solar cells comprising perovskite nanocrystals (NCs) with a complementary absorption profile of the organic host matrix are reported. In particular, NH2CH[double bond, length as m-dash]NH2PbI3 (FAPbI3) perovskite NCs are implemented in bulk heterojunction organic solar cells based on the pDPP5T-2 electron donating polymer and a [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) acceptor at various loading amounts and the fabricated hybrid photovoltaics are thoroughly studied by employing different optoelectrical characterization methods. Current-voltage measurements and photoinduced charge carrier extraction by linear increasing voltage (photo-CELIV) reveal improved charge generation and charge transport properties upon incorporation of perovskite NCs into the photo-active layer of the hybrid solar cell. The power conversion efficiency (PCE) of the hybrid solar cell comprising 5% perovskite NCs is 10% enhanced compared to the organic reference, mainly due to the enlarged light harvesting and increased short circuit current density (Jsc). However, results suggest that introducing a higher amount of perovskite content induces bimolecular and trap-assisted recombination in the ternary devices. We perform a comprehensive transient absorption study of the charge transfer/transport mechanisms by employing femto-second pump-probe transient absorption spectroscopy (fs-TAS). fs-TAS measurements demonstrate a slower charge carrier recombination rate due to the introduction of perovskite NCs into the photoactive layer. Results reveal that DPP injects electrons from the singlet excited state into the perovskite NCs, which causes the desired cascading charge carrier transfer. In ternary blends, a small amount of FAPbI3 NCs provides an additional pathway in favor of the charge-separated state via the NCs, which, despite accelerating the depopulation of DPP's singlet excited state slightly slows down the charge-separation process between DPP and PC61BM. Interestingly, the loss processes are slowed down; an effect that is more important and, hence, explains the improved solar cell efficiency.

Robot-Based High-Throughput Engineering of Alcoholic Polymer: Fullerene Nanoparticle Inks for an Eco-Friendly Processing of Organic Solar Cells.

Development of high-quality organic nanoparticle inks is a significant scientific challenge for the industrial production of solution-processed organic photovoltaics (OPVs) with eco-friendly processing methods. In this work, we demonstrate a novel, robot-based, high-throughput procedure performing automatic poly(3-hexylthio-phene-2,5-diyl) and indene-C60 bisadduct nanoparticle ink synthesis in nontoxic alcohols. A novel methodology to prepare particle dispersions for fully functional OPVs by manipulating the particle size and solvent system was studied in detail. The ethanol dispersion with a particle diameter of around 80-100 nm exhibits reduced degradation, yielding a power conversion efficiency of 4.52%, which is the highest performance reported so far for water/alcohol-processed OPV devices. By successfully deploying the high-throughput robot-based approach for an organic nanoparticle ink preparation, we believe that the findings demonstrated in this work will trigger more research interest and effort on eco-friendly industrial production of OPVs.

In silico assessment of the conduction mechanism of the Ryanodine Receptor 1 reveals previously unknown exit pathways.

The ryanodine receptor 1 is a large calcium ion channel found in mammalian skeletal muscle. The ion channel gained a lot of attention recently, after multiple independent authors published near-atomic cryo electron microscopy data. Taking advantage of the unprecedented quality of structural data, we performed molecular dynamics simulations on the entire ion channel as well as on a reduced model. We calculated potentials of mean force for Ba2+, Ca2+, Mg2+, K+, Na+ and Cl- ions using umbrella sampling to identify the key residues involved in ion permeation. We found two main binding sites for the cations, whereas the channel is strongly repulsive for chloride ions. Furthermore, the data is consistent with the model that the receptor achieves its ion selectivity by over-affinity for divalent cations in a calcium-block-like fashion. We reproduced the experimental conductance for potassium ions in permeation simulations with applied voltage. The analysis of the permeation paths shows that ions exit the pore via multiple pathways, which we suggest to be related to the experimental observation of different subconducting states.

X-ray computed tomography study of the flight-adapted tracheal system in the blowfly Calliphora vicina, analysing the ventilation mechanism and flow-directing valves.

Following the discovery of flight motor-driven unidirectional gas exchange with rising PO2  in the blowfly, X-ray computed tomography (CT) was used to visualize the organization of the tracheal system in the anterior body with emphasis on the arrangement of the pathways for airflow. The fly's head is preferentially supplied by cephalic tracheae originating from the ventral orifice of the mesothoracic spiracle (Sp1). The respiratory airflow during flight is a by-product of cyclic deformations of the thoracic box by the flight muscles. The air sacs below the tergal integument (scutum and scutellum) facilitate the respiratory airflow: the shortening of the thorax turns the scutellum and the wings downward and the scutum upward with a volume increase in the scutal air sacs. The resulting negative pressure sucks air from Sp1 through special tracheae towards the scutal air sacs. The airflow is directed by two valves that open alternately: (1) the hinged filter flaps of the metathoracic spiracles (Sp2) are passively pushed open during the upstroke by the increased tracheal pressure, thereby enabling expiration; (2) a newly described tracheal valve-like septum behind the regular spiracular valve lids of Sp1 opens passively and air is sucked in through Sp1 during the downstroke and prevents expiration by closing during the upstroke. This stabilizes the unidirectional airflow. The tracheal volume of the head, thorax and abdomen and their mass were determined. Despite the different anatomy of birds and flies, the unidirectional airflow reveals a comparable efficiency of the temporal throughput in flies and hummingbirds.

Influence of Substrate Bonding and Surface Morphology on Dynamic Organic Layer Growth: Perylenetetracarboxylic Dianhydride on Au(111).

We investigated the dynamics of the initial growth of the first epitaxial layers of perylenetetracarboxylic dianhydride (PTCDA) on the Au(111) surface with high lateral resolution using the aberration-corrected spectro-microscope SMART. With this instrument, we could simultaneously study the different adsorption behaviors and layer growth on various surface areas consisting of either a distribution of flat (111) terraces, separated by single atomic steps ("ideal surface"), or on areas with a high density of step bunches and defects ("realistic surface"). The combined use of photoemission electron microscopy, low-energy electron microscopy, and µ-spot X-ray absorption provided a wealth of new information, showing that the growth of the archetype molecule PTCDA not only has similarities but also has significant differences when comparing Au(111) and Ag(111) substrate surfaces. For instance, under otherwise identical preparation conditions, we observed different growth mechanisms on different surface regions, depending on the density of step bunches. In addition, we studied the spatially resolved desorption behavior which also depends on the substrate morphology.

A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells.

A major bottleneck delaying the further commercialization of thin-film solar cells based on hybrid organohalide lead perovskites is interface loss in state-of-the-art devices. We present a generic interface architecture that combines solution-processed, reliable, and cost-efficient hole-transporting materials without compromising efficiency, stability, or scalability of perovskite solar cells. Tantalum-doped tungsten oxide (Ta-WO x )/conjugated polymer multilayers offer a surprisingly small interface barrier and form quasi-ohmic contacts universally with various scalable conjugated polymers. In a simple device with regular planar architecture and a self-assembled monolayer, Ta-WO x -doped interface-based perovskite solar cells achieve maximum efficiencies of 21.2% and offer more than 1000 hours of light stability. By eliminating additional ionic dopants, these findings open up the entire class of organics as scalable hole-transporting materials for perovskite solar cells.

µ-XRF Studies on the Colour Brilliance in Ancient Wool Carpets.

Many handmade ancient and recent oriental wool carpets show outstanding brilliance and persistence of colour that is not achieved by common industrial dyeing procedures. Anthropologists have suggested the influence of wool fermentation prior to dyeing as key technique to achieve the high dyeing quality. By means of µ-XRF elemental mapping of mordant metals we corroborate this view and show a deep and homogenous penetration of colourants into fermented wool fibres. Furthermore we are able to apply this technique and prove that the fermentation process for ancient specimens cannot be investigated by standard methods due to the lack of intact cuticle layers. This finding suggests a broad range of further investigations that will contribute to a deeper understanding of the development of traditional dyeing techniques. Spectroscopic studies add information on the oxidation states of the metal ions within the respective mordant-dye-complexes and suggest a partial charge transfer as basis for a significant colour change when Fe mordants are used.