Computational and Experimental Investigations of Osmium-Rich Borides Hf2MOs5B2 (M = Mn, Fe, Co): From Spin Glass to Room-Temperature Magnetic Behaviors.

The metal borides, Hf2MOs5B2 (M = Mn, Fe, Co), which are the first Os-rich quaternary variants of the prolific Ti3Co5B2 structure type, were investigated computationally and experimentally. In their crystal structures, osmium builds a network of prisms, in which the other elements are located. The magnetic M elements are found in face-connected Os8 square prisms leading to M-chains with intra- and interchain distances of about 3.0 and 6.5 Å, respectively. Density functional theory (DFT) showed that magnetic ordering is hugely favored for M = Mn and Fe but only slightly favored for M = Co. Experimental investigations then confirmed and extended the DFT predictions as a metamagnetic behavior was found for the M = Mn and Fe phases, whereby the antiferromagnetic interactions (TN = 19 and 90 K) found at low magnetic fields change to ferromagnetic at higher fields. A very broad transition (TN = 45 K) is found for M = Co, suggesting spin-glass behavior for this phase. For M = Fe, a hard-magnet hysteresis at 5 K is found with a 40 kA/m coercivity, and even at room temperature, a significant hysteresis is found. This study paves the way for the discovery of Os-based magnets in this structure type and other intermetallics.

Hetero-trimetallic complexes comprising bridging boryl and borylene ligands: an experimental and theoretical study.

In an effort to explore the coordination chemistry of the coordinative sulfur centers in arachno-ruthenaborane [(Cp*Ru)2(B3H8)(CS2H)] (arachno-1), we have thermolyzed arachno-1 with group-6 metal carbonyls [M(CO)5·THF] (M = Cr, Mo and W). The reaction of arachno-1 with [Cr(CO)5·THF] resulted in the formation of hetero-trimetallic triply bridging borylene [(Cp*Ru)2(µ-CO)(µ3-CH2S2-κ2S':κ2S''){Cr(CO)3}(µ3-BH)] (2), bridging boryl-borylene [(Cp*Ru)2(µ-CO){(µ3-BH(CH2S2)-κ2B:κ2S':κ1S'')}{Cr(CO)3}(µ3-BH)] (3), and sulfido bridged hetero-trimetallic complex [(Cp*Ru)2(µ-CO)3{Cr(CO)3}(µ3-S)] (4). In 2, one side of Ru2Cr-triangle features a µ3-BH ligand while the other side is quadruply bridged by a methanedithiolato ligand in an unsymmetrical fashion. Unlike 2, in complex 3, one side of the Ru2Cr-triangle has a µ3-BH ligand while the opposite side is bridged by a boryl ligand BH(CH2S2) in an unsymmetrical way (µ3-κ2:κ2:κ1) to the metal centers. Interestingly, when the similar reactions of arachno-1 were performed with heavier group-6 metal carbonyls [M(CO)5·THF] (M = Mo and W), it led to the formation of methanedithiolato bridged hetero-trimetallic chain complexes, [{Cp*Ru(CO)}2(µ-CO)2(µ3-CH2S2-κ2S':κ2S''){M(CO)2}] (5, M = Mo; 6, M = W) and sulfido-bridged hetero-trimetallic complexes [(Cp*Ru)2(µ-CO)3{M(CO)3}(µ3-S)] (7, M = Mo; 8, M = W), analogous to 4. In complexes 5 and 6, a Ru2M-chain is symmetrically bridged by a methanedithiolato ligand. On the other hand, in complexes 4, 7, and 8, a sulfido ligand coordinates to two ruthenium and one group-6 metal atoms in µ3-fashion. All the complexes have been characterized by 1H NMR, 13C NMR, UV-vis, IR spectroscopy, and mass spectrometry and their structural architectures have been unambiguously established by single crystal X-ray diffraction studies. In addition, theoretical investigations provided valuable insights into their electronic structures and bonding properties.

Enhancing Intrinsic Magnetic Hardness by Modulating Antagonistic Interactions in the Rare-Earth-Free Magnetic Solid Solution Hf2 Fe1-δ Ru5-x Irx+δ B2.

The quinary members in the solid solution Hf2 Fe1-δ Ru5-x Irx+δ B2 (x=1-4, VE=63-66) have been investigated experimentally and computationally. They were synthesized via arc-melting and analyzed by EDX and X-ray diffraction. Density functional theory (DFT) calculations predicted a preference for magnetic ordering in all members, but with a strong competition between ferro- and antiferromagnetism arising from interchain Fe-Fe interactions. The spin exchange and magnetic anisotropy energies predicted the lowest magnetic hardness for x=1 and 3 and the highest for x=2. Magnetization measurements confirm the DFT predictions and demonstrate that the antiferromagnetic ordering (TN =55-70 K) found at low magnetic fields changed to ferromagnetic (TC =150-750 K) at higher fields, suggesting metamagnetic behavior for all samples. As predicted, Hf2 FeRu3 Ir2 B2 has the highest intrinsic coercivity (Hc =74 kA/m) reported to date for Ti3 Co5 B2 -type phases. Furthermore, all coercivities outperform that of ferromagnetic Hf2 FeIr5 B2 , indicating the importance of AFM interactions in enhancing magnetic anisotropy in these materials. Importantly, two members (x=1 and 4) maintain intrinsic coercivities in the semi-hard range at room temperature. This study opens an avenue for controlling magnetic hardness by modulating antagonistic AFM and FM interactions in low-dimensional rare-earth-free magnetic materials.

Fe- and B-Chains in the Ti5-xFe1-yOs6+x+yB6 Structure Type Derived from Chemical Twinning of the Nb1-xOs1+xB Type: Experimental and Computational Investigations.

The complex metal-rich boride Ti5-xFe1-yOs6+x+yB6 (0 < x,y < 1), crystallizing in a new structure type (space group Cmcm, no. 63), was prepared by arc-melting. The new structure contains both isolated boron atoms and zigzag boron chains (B-B distance of 1.74 Å), a rare combination among metal-rich borides. In addition, the structure also contains Fe-chains running parallel to the B-chains. Unlike in previously reported structures, these Fe-chains are offset from each other and arranged in a triangular manner with intrachain and interchain distances of 2.98 and 6.69 Å, respectively. Density functional theory (DFT) calculations predict preferred ferromagnetic interactions within each chain but only small energy differences for different magnetic interactions between them, suggesting a potentially weak long-range order. This new structure offers the opportunity to study new configurations and interactions of magnetic elements for the design of magnetic materials.

Metal-Mediated Directional Capping of Rod-Packing Metal-Organic Frameworks.

Two new rod-packing metal-organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn2+ with a stronger Lewis acidic Co2+ , leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.

Triangular Arrangement of Ferromagnetic Iron Chains in the High-TC Ferromagnet TiFe1-x Os2+x B2.

Transition-metal borides (TMBs) containing Bn -fragment (n>3) have recently gained interest for their ability to enable exciting magnetic materials. Herein, we show that the B4 -containing TiFe0.64(1) Os2.36(1) B2 is a new ferromagnetic TMB with a Curie temperature of 523(2) K and a Weiss constant of 554(3) K, originating from the chain of M3 -triangles (M=64 %Fe+36 %Os). The new phase was synthesized from the elements by arc-melting, and its structure was elucidated by single-crystal X-ray diffraction. It belongs to the Ti1+x Os2-x RuB2 -type structure (space group P 6 ‾ 2 m, no. 189) and contains trigonal-planar B4 boron fragments [B-B distance of 1.87(4) Å] interacting with M3 -triangles [M-M distances of 2.637(8) Šand 3.0199(2) Å]. The experimental results were supported by computational calculations based on the ideal TiFeOs2 B2 composition, which revealed strong ferromagnetic interactions within and between the Fe3 -triangles. This discovery represents the first magnetically ordered Os-rich TMB, thus it will help expand our knowledge of the role of Os in low-dimensional magnetism of intermetallics and enable the design of such materials in the future.

Nonprecious Metal Borides: Emerging Electrocatalysts for Hydrogen Production.

ConspectusThe development of highly active noble-metal-free catalysts for the hydrogen evolution reaction (HER) is the focus of current fundamental research, aiming for a more efficient and economically affordable water-splitting process. While most HER catalysts are studied only at the nanoscale (small particle size and high surface area), metal borides (MBs) are mostly studied in bulk form. This offers a unique opportunity for designing highly efficient and nonprecious HER MBs electrocatalysts based on structure-activity relationships, especially because of their rich compositional and structural diversity.In this Account, we focus on the importance of boron and its substructures in achieving extraordinary HER performances and the importance of using structure-activity relationships to design next-generation MBs electrocatalysts. Studying the Mo-B system, we found that the HER activity of molybdenum borides increases with increasing boron content: from Mo2B (no B-B bonds in the structure, least active) to α-MoB and ß-MoB (zigzag boron chains, intermediate activity) and MoB2 (planar graphene-like boron layer, most active). Density functional theory (DFT) calculations have shown that the (001) boron layer in hexagonal MoB2 (α-MoB2) is the most active surface and has similar HER activity behavior like the benchmark Pt(111) surface. However, puckering this flat boron layer to the chair-like configuration (phosphorene-like layer) drastically reduces its activity, thereby making the rhombohedral modification of MoB2 (Mo2B4 or ß-MoB2) less active than α-MoB2. This discovery was then further supported by studies of the Mo-W-B system. In fact, the binary WB2, which also contains the puckered boron layer, is also less active than α-MoB2, despite containing the more active transition metal W, which performs better in elemental form than Mo. To design a superior catalyst, the more active W was then stabilized in the hexagonal α-MoB2 structure through the synthesis of α-Mo0.7W0.3B2 ,which indeed proved to be a better HER electrocatalyst than α-MoB2. Using the isoelectronic Cr instead of W led to the α-Cr1-xMoxB2 solid solution, the HER activity of which followed unexpected canonic-like (or volcano-like) behavior that perfectly matched that of the c lattice parameter trend, thereby producing the best catalyst α-Cr0.4Mo0.6B2 that outperformed Pt/C at high current density, thus underscoring the effectiveness of the structure-activity concept in designing highly active catalysts. This concept was further applied to the V-B system, leading to the discovery of an unexpected boron chain dependency of the HER activity that ultimately led to the prediction of new VxBy catalysts and their crystal structures and overpotentials. Finally, reducing the particle sizes of all of these bulk crystalline catalysts is also possible and offers an even greater potential as demonstrated for nanoscale a-MoB2 and VB2. Nevertheless, these crystalline nanomaterials are still highly agglomerated due to the high temperature required for their synthesis, thus the synthesis of highly dispersed MBs is an urgent goal that will enable the fulfillment of their extraordinary potential in the future.

Rare-Earth-Free Magnets: Enhancing Magnetic Anisotropy and Spin Exchange Toward High-TC Hf2MIr5B2 (M = Mn, Fe).

Designing new rare-earth-free (REF) permanent magnetic materials (PMM) to replace the high performing but critically restrained rare-earth-based PMM remains a great challenge to the scientific community. Here, we report on the rational design of new REF PMM, Hf2MIr5B2 (M = Fe, Mn) via a theory-experiment combined approach. Density functional theory (DFT) predicted strong interchain M-M spin-exchange coupling and large magnetocrystalline anisotropy energies (EMAE) for the new compounds, suggesting potential intrinsic PMM properties. Subsequent experimental bulk syntheses and magnetic characterizations established the highest ordering temperature (TC ∼ 900 K) for Hf2FeIr5B2 and the highest intrinsic coercivity (HC) value for Hf2MnIr5B2 (HC = 62.1 kA/m) reported to date for Ti3Co5B2-type compounds. Importantly, at room temperature both phases show significant coercivities due to intrinsic factors only, hinting at their huge potential to create REF PMM by improving extrinsic factors such as controlling the microstructure and the domain orientation.

Canonic-Like HER Activity of Cr1- x Mox B2 Solid Solution: Overpowering Pt/C at High Current Density.

Abundant transition metal borides are emerging as substitute electrochemical hydrogen evolution reaction (HER) catalysts for noble metals. Herein, an unusual canonic-like behavior of the c lattice parameter in the AlB2 -type solid solution Cr1- x Mox B2 (x = 0, 0.25, 0.4, 0.5, 0.6, 0.75, 1) and its direct correlation to the HER activity in 0.5 M H2 SO4 solution are reported. The activity increases with increasing x, reaching its maximum at x = 0.6 before decreasing again. At high current densities, Cr0.4 Mo0.6 B2 outperforms Pt/C, as it needs 180 mV less overpotential to drive an 800 mA cm-2 current density. Cr0.4 Mo0.6 B2 has excellent long-term stability and durability showing no significant activity loss after 5000 cycles and 25 h of operation in acid. First-principles calculations have correctly reproduced the nonlinear dependence of the c lattice parameter and have shown that the mixed metal/B layers, such as (110), promote hydrogen evolution more efficiently for x = 0.6, supporting the experimental results.

On the formation of the Gd3Ru4Al12versus the Y2Co3Ga9 type structure - M3Rh4Al12 (M = Ca, Eu) versus M2T3Al9 (M = Ca, Sr, Eu, Yb; T = Ir, Pt).

The new Y2Co3Ga9 and Gd3Ru4Al12 type representatives M2T3Al9 (M = Ca, Sr, Eu; T = Ir, Pt) and M3Rh4Al12 (M = Ca, Eu) have been synthesized from the elements by heating the respective elemental compositions in sealed tantalum tubes. The samples were analysed by powder X-ray diffraction to check their purity. By applying different temperature treatments, their phase purity and crystallinity were enhanced. The crystal structures of Ca3Rh4Al12 and Eu3Rh4Al12 (hexagonal Gd3Ru4Al12 type, P63/mmc) as well as Ca2Ir3Al9 and Ca2Pt3Al9 (orthorhombic Y2Co3Ga3 type, Cmcm) were refined from single-crystal X-ray diffraction data. All structures can be described based on distorted cube-like T@Al8 units that are connected to form strands. Additionally, an Al11 supertetrahedral building block can be identified within the structures. While the trigonal bipyramidal core of the cluster contains substantial bonding interactions in the case of the M3Rh4Al12 members, the connection via common edges in the case of the M2Ir3Al9 compounds seems to weaken these interactions. The differences in the bonding situation and the question why these different structure types are formed for the different transition metals has been targeted by quantum-chemical calculations. The calculated formation energy using three different reaction paths suggests that the stability of these phases is highly dependent on the side phases involved, even though Ca3T4Al12 phases are in general thermodynamically more favourable. According to the Bader analysis of the two polyanions, an improved covalent bonding can be observed in the [T4Al12]δ- over the [T3Al9]δ- framework.

Unexpected Correlation Between Boron Chain Condensation and Hydrogen Evolution Reaction (HER) Activity in Highly Active Vanadium Borides: Enabling Predictions.

Transition-metal borides (TMBs) have recently attracted attention as excellent hydrogen evolution (HER) electrocatalysts in bulk crystalline materials. Herein, we show for the first time that VB and V3 B4 have high electrocatalytic HER activity. Furthermore, we show that the HER activity (in 0.5 m H2 SO4 ) increases with increasing boron chain condensation in vanadium borides: Using a -23 mV overpotential decrement derived from -0.296 mV (for VB at -10 mA cm-2 current density) and -0.273 mV (for V3 B4 ) we accurately predict the overpotential of VB2 (-0.204 mV) as well as that of unstudied V2 B3 (-0.250 mV) and hypothetical "V5 B8 " (-0.227 mV). We then derived an exponential equation that predicts the overpotentials of known and hypothetical Vx By phases containing at least a boron chain. These results provide a direct correlation between crystal structure and HER activity, thus paving the way for the design of even better electrocatalytic materials through structure-activity relationships.

Nanostructured core-shell metal borides-oxides as highly efficient electrocatalysts for photoelectrochemical water oxidation.

Oxygen evolution reaction (OER) catalysts are critical components of photoanodes for photoelectrochemical (PEC) water oxidation. Herein, nanostructured metal boride MB (M = Co, Fe) electrocatalysts, which have been synthesized by a Sn/SnCl2 redox assisted solid-state method, were integrated with WO3 thin films to build heterojunction photoanodes. As-obtained MB modified WO3 photoanodes exhibit enhanced charge carrier transport, amended separation of photogenerated electrons and holes, prolonged hole lifetime and increased charge carrier density. Surface modification of CoB and FeB significantly enhances the photocurrent density of WO3 photoanodes from 0.53 to 0.83 and 0.85 mA cm-2, respectively, in transient chronoamperometry (CA) at 1.23 V vs. RHE (VRHE) under interrupted illumination in 0.1 M Na2SO4 electrolyte (pH 7), corresponding to an increase of 1.6 relative to pristine WO3. In contrast, the pristine MB thin film electrodes do not produce noticeable photocurrent during water oxidation. The metal boride catalysts transform in situ to a core-shell structure with a metal boride core and a metal oxide (MO, M = Co, Fe) surface layer. When coupled to WO3 thin films, the CoB@CoOx nanostructures exhibit a higher catalytic enhancement than corresponding pure cobalt borate (Co-Bi) and cobalt hydroxide (Co(OH)x) electrocatalysts. Our results emphasize the role of the semiconductor-electrocatalyst interface for photoelectrodes and their high dependency on materials combination.

A Delicate Balance between Antiferromagnetism and Ferromagnetism: Theoretical and Experimental Studies of A2 MRu5 B2 (A=Zr, Hf; M=Fe, Mn) Metal Borides.

Metal-rich borides with the Ti3 Co5 B2 -type structure represent an ideal playground for tuning magnetic interactions through chemical substitutions. In this work, density functional theory (DFT) and experimental studies of Ru-rich quaternary borides with the general composition A2 MRu5 B2 (A=Zr, Hf, M=Fe, Mn) are presented. Total energy calculations show that the phases Zr2 FeRu5 B2 and Hf2 FeRu5 B2 prefer ground states with strong antiferromagnetic (AFM) interactions between ferromagnetic (FM) M-chains. Manganese substitution for iron lowers these antiferromagnetic interchain interactions dramatically and creates a strong competition between FM and AFM states with a slight preference for AFM in Zr2 MnRu5 B2 and for FM in Hf2 MnRu5 B2 . Magnetic property measurements show a field dependence of the AFM transition (TN ): TN is found at 0.1 T for all phases with predicted AFM states whereas for the predicted FM phase it is found at a much lower magnetic field (0.005 T). Furthermore, TN is lowest for a Hf-based phase (20 K) and highest for a Zr-based one (28 K), in accordance with DFT predictions of weaker AFM interactions in the Hf-based phases. Interestingly, the AFM transitions vanish in all compounds at higher fields (>1 T) in favor of FM transitions, indicating metamagnetic behaviors for these Ru-rich phases.

An Old Dog with New Tricks - Additions to the Cesium Lithium Chloride System: Cs3Li2Cl5 and the Hydrated Cs3LiCl4 · 4H2O.

The CsCl/LiCl system has been studied for over a century now. Numerous phases have been predicted - only three have hitherto been found. We present the synthesis and single-crystal structure of the cesium lithium pentachloride Cs3Li2Cl5, predicted earlier but with a different structure. The anhydrous new phase readily reacts to Cs3LiCl4 · 4H2O in air. The tetrahydrate can also be obtained through the simplest, most inexpensive and green synthesis possible: an immediate, room-temperature mechanosynthesis from only CsCl and LiCl (3 : 1) in air. Differential scanning calorimetry (DSC) and thermogravimetric analyses (TGA), as well as in situ temperature-dependent powder X-ray diffraction studies on this second ever reported ternary alkali chloride hydrate allowed for a revision of the CsCl/LiCl phase diagram. Density of states and total energy calculations further elucidate the new alkali chlorides and update the relative stability of previous structure predictions.

Highly Efficient Spin-Orbit Torque and Switching of Layered Ferromagnet Fe3GeTe2.

Among van der Waals (vdW) layered ferromagnets, Fe3GeTe2 (FGT) is an excellent candidate material to form FGT/heavy metal heterostructures for studying the effect of spin-orbit torques (SOT). Its metallicity, strong perpendicular magnetic anisotropy built in the single atomic layers, relatively high Curie temperature (Tc ∼ 225 K), and electrostatic gate tunability offer a tantalizing possibility of achieving the ultimate high SOT limit in monolayer all-vdW nanodevices. In this study, we fabricate heterostructures of FGT/Pt with 5 nm of Pt sputtered onto the atomically flat surface of ∼15-23 nm exfoliated FGT flakes. The spin current generated in Pt exerts a damping-like SOT on FGT magnetization. At ∼2.5 × 1011 A/m2 current density, SOT causes the FGT magnetization to switch, which is detected by the anomalous Hall effect of FGT. To quantify the SOT effect, we measure the second harmonic Hall responses as the applied magnetic field rotates the FGT magnetization in the plane. Our analysis shows that the SOT efficiency is comparable with that of the best heterostructures containing three-dimensional (3D) ferromagnetic metals and much larger than that of heterostructures containing 3D ferrimagnetic insulators. Such large efficiency is attributed to the atomically flat FGT/Pt interface, which demonstrates the great potential of exploiting vdW heterostructures for highly efficient spintronic nanodevices.

High-Current-Density HER Electrocatalysts: Graphene-like Boron Layer and Tungsten as Key Ingredients in Metal Diborides.

Transition-metal borides belong to a small class of non-noble-metal electrocatalysts that exhibit excellent activity toward the hydrogen evolution reaction (HER) already in bulk form; those containing graphene-like (flat) boron layers, such as α-MoB2 , are particularly promising. In this study, the first tungsten-based boride HER electrocatalysts were studied experimentally and theoretically. Tungsten, the diborides of which (α- and ß-WB2 ) contain both the active graphene-like (flat) boron layer and the less active phosphorene-like (puckered) boron layer, could be successfully substituted (up to 30 at %) for molybdenum in α-MoB2 . The resulting α-Mo1-x Wx B2 exhibited better HER activity and stability than the binaries WB2 and MoB2 , especially at high current density in acidic electrolytes. DFT calculations showed that the graphene-like boron layer is the most active among the studied surfaces and that tungsten promotes hydrogen generation by facilitating bonding between hydrogen atoms in contrast to molybdenum. These results should pave the way for high-current-density, abundant, and inexpensive bulk and nanoscale HER catalysts by applying structure-activity relationships.

From 3D to 2D: Structural, Spectroscopic and Theoretical Investigations of the Dimensionality Reduction in the [PtAl2 ]δ- Polyanions of the Isotypic MPtAl2 Series (M=Ca-Ba, Eu).

Four new MPtAl2 (M=Ca, Sr, Ba, Eu) compounds, adopting the orthorhombic MgCuAl2 -type structure, have been synthesized from the elements using tantalum ampoules. All compounds are obtained as platelet-shaped crystallites and exhibit an increasing moisture sensitivity with increasing size of the formal M cation. Structural investigations indicate a pronounced elongation of the crystallographic b-axis, which results in a significant distortion of the [PtAl2 ]δ- polyanion. Within the polyanion, layer-like arrangements can be found with bonding Pt-Al interactions within the slab; the increase of the b-axis can be attributed to increasing Al-Al distances and therefore decreasing interactions between the slabs, caused by the differently-sized formal M cations. While the alkaline earth (M=Ca, Sr) representatives exhibit Pauli paramagnetism, BaPtAl2 shows diamagnetic behavior, finally EuPtAl2 is ferromagnetic with TC =54.0(5) K. The effective magnetic moment indicates that the Eu atoms are in a divalent oxidation state, which is confirmed by 151 Eu Mössbauer spectroscopic investigations. Measurements below the Curie-temperature show a full magnetic hyperfine field splitting with Bhf =21.7(1) T. 27 Al and 195 Pt magic-angle spinning NMR spectroscopy corroborates the presence of single crystallographic sites for the Pt and Al atoms. The large 27 Al nuclear electric quadrupolar coupling constants confirm unusually strong electric field gradients, in agreement with the structural distortions and the respective theoretical calculations. X-ray photoelectron spectroscopy has been utilized to investigate the charge transfer within the polyanion. The Pt 4f binding energy decreases with decreasing electronegativity / ionization energy of the alkaline earth elements, suggesting an increasing electron density at the Pt atoms. Theoretical investigations underline the platinide character of the investigated compounds by Bader charge calculations. The analysis of the integrated crystal orbital Hamilton population (ICOHP) values, electron localization function (ELF) and isosurface analyses lead to a consistent structural picture, indicating stable layer-like arrangements of the [PtAl2 ]δ- polyanion.

Effect of Substitution on the Hysteretic Phase Transition in a Bistable Phenalenyl-Based Neutral Radical Molecular Conductor.

The ability to tune the physical properties of bistable organic functional materials by means of chemistry can facilitate their development for molecular electronic switching components. The butylamine-containing biphenalenyl boron neutral radical, [Bu]2 B, crystalline compound has recently attracted significant attention by displaying a hysteretic phase transition accompanied by simultaneous bistability in magnetic, electrical, and optical properties close to room temperature. In this report, substitutional doping was applied to [Bu]2 B by crystallizing solid solutions of bistable [Bu]2 B and its non-radical-containing counterpart [Bu]2 Be. With increasing doping degree, the hysteretic phase transition is gradually suppressed in terms of reducing the height, but conserves the width of the hysteresis loop as observed through magnetic susceptibility and electrical conductivity measurements. At the critical doping level of about 6 %, the abrupt transformation of the crystal structure to that of the pure [Bu]2 Be crystal packing was observed, accompanied by a complete collapse of the hysteresis loop. Further study of the structure-properties relationships of bistable neutral radical conductors based on the [Bu]2 B host can be conducted utilizing a variety of biphenalenyl-based molecular conductors.

Structural-Distortion-Driven Magnetic Transformation from Ferro- to Ferrimagnetic Iron Chains in B6 -based Nb6 FeIr6 B8.

We report on a structural distortion of kinetically stable B6 -based ferromagnetic Nb6 FeIr6 B8 that induces an unprecedented transformation of a ferromagnetic Fe chain into two ferrimagnetic Fe chains through superstructure formation. Density functional theory calculations showed that the ferromagnetic Fe-Fe intrachain interactions found in the undistorted structure become ferrimagnetic in the distorted superstructure, mainly because the two independent iron atoms building each chain interact antiferromagnetically and carry different magnetic moments. High-temperature SQUID magnetometry confirmed ferrimagnetic ordering at 525 K with a high and negative Weiss constant of -972 K indicating the presence of strong antiferromagnetic interactions, as predicted. This finding paves the way for the development of low-dimensional magnetic intermetallic systems based on Heisenberg ferrimagnetic chains, which have previously been studied only in molecular-based compounds.

A Simple, General Synthetic Route toward Nanoscale Transition Metal Borides.

Most nanomaterials, such as transition metal carbides, phosphides, nitrides, chalcogenides, etc., have been extensively studied for their various properties in recent years. The similarly attractive transition metal borides, on the contrary, have seen little interest from the materials science community, mainly because nanomaterials are notoriously difficult to synthesize. Herein, a simple, general synthetic method toward crystalline transition metal boride nanomaterials is proposed. This new method takes advantage of the redox chemistry of Sn/SnCl2 , the volatility and recrystallization of SnCl2 at the synthesis conditions, as well as the immiscibility of tin with boron, to produce crystalline phases of 3d, 4d, and 5d transition metal nanoborides with different morphologies (nanorods, nanosheets, nanoprisms, nanoplates, nanoparticles, etc.). Importantly, this method allows flexibility in the choice of the transition metal, as well as the ability to target several compositions within the same binary phase diagram (e.g., Mo2 B, α-MoB, MoB2 , Mo2 B4 ). The simplicity and wide applicability of the method should enable the fulfillment of the great potential of this understudied class of materials, which show a variety of excellent chemical, electrochemical, and physical properties at the microscale.