RESUMEN
Anticipating changes to vehicle interiors with future automated driving systems, the automobile industry recently has focused attention on crash response in novel postures with increased seatback recline. Prior research found that this posture may result in greater risk of lumbar spine injury in the event of a frontal crash. This study developed a lumbar spine injury risk function (IRF) that estimated injury risk as a function of simultaneously applied compression force and flexion moment. Force and moment failure data from 40 compression-flexion tests were utilized in a Weibull survival model, including appropriate data censoring. A mechanics-based injury metric was formulated, where lumbar spine compression force and flexion moment were normalized by specimen geometry. Subject age was incorporated as a covariate to further improve model fit. A weighting factor was included to adjust the influence of force and moment, and parameter optimization yielded a value of 0.11. Thus, the normalized compression force component had a greater effect on injury risk than the normalized flexion moment component. Additionally, as force was nominally increased, less moment was required to produce injury for a given age and specimen geometry. The resulting IRF may be utilized to improve occupant safety in the future.
Asunto(s)
Accidentes de Tránsito , Traumatismos Vertebrales , Humanos , Automóviles , Vértebras Lumbares/fisiología , Fenómenos BiomecánicosRESUMEN
Recent automotive epidemiology studies have concluded that females have significantly higher odds of sustaining a moderate brain injury or concussion than males in a frontal crash after controlling for multiple crash and occupant variables. Differences in neuroanatomical features, such as intracranial volume (ICV), have been shown between male and female subjects, but how these sex-specific neuroanatomical differences affect brain deformation is unknown. This study used subject-specific finite element brain models, generated via registration-based morphing using both male and female magnetic resonance imaging scans, to investigate sex differences of a variety of neuroanatomical features and their effect on brain deformation; additionally, this study aimed to determine the relative importance of these neuroanatomical features and sex on brain deformation metrics for a single automotive loading environment. Based on the Bayesian linear mixed models, sex had a significant effect on ICV, white matter volume and gray matter volume, as well as a section of cortical gray matter regions' thicknesses and volumes; however, after these neuroanatomical features were accounted for in the statistical model, sex was not a significant factor in predicting brain deformation. ICV had the highest relative effect on the brain deformation metrics assessed. Therefore, ICV should be considered when investigating both brain injury biomechanics and injury risk.
Asunto(s)
Lesiones Encefálicas , Encéfalo , Humanos , Femenino , Masculino , Análisis de Elementos Finitos , Teorema de Bayes , Encéfalo/diagnóstico por imagen , Encéfalo/patología , Imagen por Resonancia Magnética , Lesiones Encefálicas/diagnóstico por imagen , Lesiones Encefálicas/patologíaRESUMEN
Computational human body models (HBMs) are important tools for predicting human biomechanical responses under automotive crash environments. In many scenarios, the prediction of the occupant response will be improved by incorporating active muscle control into the HBMs to generate biofidelic kinematics during different vehicle maneuvers. In this study, we have proposed an approach to develop an active muscle controller based on reinforcement learning (RL). The RL muscle activation control (RL-MAC) approach is a shift from using traditional closed-loop feedback controllers, which can mimic accurate active muscle behavior under a limited range of loading conditions for which the controller has been tuned. Conversely, the RL-MAC uses an iterative training approach to generate active muscle forces for desired joint motion and is analogous to how a child develops gross motor skills. In this study, the ability of a deep deterministic policy gradient (DDPG) RL controller to generate accurate human kinematics is demonstrated using a multibody model of the human arm. The arm model was trained to perform goal-directed elbow rotation by activating the responsible muscles and investigated using two recruitment schemes: as independent muscles or as antagonistic muscle groups. Simulations with the trained controller show that the arm can move to the target position in the presence or absence of externally applied loads. The RL-MAC trained under constant external loads was able to maintain the desired elbow joint angle under a simplified automotive impact scenario, implying the robustness of the motor control approach.
Asunto(s)
Accidentes de Tránsito , Brazo , Fenómenos Biomecánicos , Niño , Humanos , Aprendizaje , MúsculosRESUMEN
Vehicle safety systems have substantially decreased motor vehicle crash-related injuries and fatalities, but injuries to the lumbar spine still have been reported. Experimental and computational analyses of upright and, particularly, reclined occupants in frontal crashes have shown that the lumbar spine can be subjected to simultaneous and out-of-phase combined axial compression and flexion loading. Lumbar spine failure tolerance in combined compression-flexion has not been widely explored in the literature. Therefore, the goal of this study was to measure the failure tolerance of the lumbar spine in combined compression and flexion. Forty lumbar spine segments with three vertebrae (one unconstrained) and two intervertebral discs (both unconstrained) were pre-loaded with axial compression (2200N, 3300N, or 4500N) and then subjected to rotation-controlled dynamic flexion bending until failure. Clinically relevant middle vertebra fractures were observed in twenty-one of the specimens, including compression and burst fractures. The remaining nineteen specimens experienced failure at the potting-grip interface. Failure tolerance varied within the sample and were categorized by the appropriate data censoring, with clinically relevant middle vertebrae fractures characterized as uncensored or left-censored and potting-grip fractures characterized as right-censored. Average failure force and moment were 3290N (range: 1580N to 5042N) and 51Nm (range: 0Nm to 156 Nm) for uncensored data, 3686N (range: 3145N to 4112N) and 0Nm for left-censored data, and 3470N (range: 2138N to 5062N) and 101Nm (range: 27Nm to 182Nm) for right-censored data. These data can be used to develop and improve injury prediction tools for lumbar spine fractures and further research in future safety systems.
Asunto(s)
Vértebras Lumbares , Fracturas de la Columna Vertebral , Accidentes de Tránsito , Fenómenos Biomecánicos , Humanos , Rango del Movimiento ArticularRESUMEN
The use of standardized anthropomorphic test devices and test conditions prevent current vehicle development and safety assessments from capturing the breadth of variability inherent in real-world occupant responses. This study introduces a methodology that overcomes these limitations by enabling the assessment of occupant response while accounting for sources of human- and non-human-related variability. Although the methodology is generic in nature, this study explores the methodology in its application to human response in far-side motor vehicle crashes as an example. A total of 405 human body model simulations were conducted in a mid-sized sedan vehicle environment to iteratively train two neural networks to predict occupant head excursion and thoracic injury as a function of occupant anthropometry, impact direction and restraint configuration. The neural networks were utilized in Monte Carlo simulations to calculate the probability of head-to-intruding-door impacts and thoracic AIS 3+ as a function of the restraint configuration. This analysis indicated that the vehicle used in this study would lead to a range of 667 to 2,448 head-to-intruding-door impacts and a range of 3,041 to 3,857 cases of thoracic AIS 3+ in the real world, depending on the seatbelt load limiter. These real-world results were later successfully validated using United States field data. This far-side assessment illustrates how the methodology incorporates the human and non-human variability, generates response surfaces that characterize the effects of the variability, and ultimately permits vehicle design considerations and injury predictions appropriate for real-world field conditions.
Asunto(s)
Vehículos a Motor , Algoritmos , Antropometría , Fenómenos Biomecánicos , Simulación por Computador , Traumatismos Craneocerebrales/patología , Cabeza , Humanos , Persona de Mediana Edad , Redes Neurales de la Computación , ProbabilidadRESUMEN
Previous studies indicate that seatbelts may require supplementary restraints to increase their effectiveness in far-side impacts. This study aimed to evaluate the effectiveness of a novel, far-side-specific airbag in restraining and preventing injuries in far-side impacts, and to evaluate the WorldSID's response to the presence of a far-side airbag. A series of tests with three Post-Mortem Human Subjects and the WorldSID was conducted in a vehicle-based sled environment equipped with a far-side airbag. Results of these tests were evaluated and compared to a previous test series conducted without the airbag. All of the PMHS retained the shoulder belt on the shoulder. The airbag significantly reduced PMHS injury severity and maximum lateral head excursion. While the WorldSID exhibited a similar decrease in lateral excursion, it was unable to represent PMHS thoracic deflection or injury probability, and it consistently slipped out of the shoulder belt. This indicates that the WorldSID is limited both in its ability to evaluate the effect of changes in the seatbelt system and in its ability to predict thoracic injury risk and assess airbag-related injury mitigation countermeasures.
Asunto(s)
Accidentes de Tránsito , Airbags , Traumatismos Vertebrales , Traumatismos Torácicos , Aceleración , Anciano , Fenómenos Biomecánicos , Cadáver , Humanos , Persona de Mediana Edad , Cinturones de Seguridad , Hombro/fisiología , Tórax/fisiologíaRESUMEN
Frontal impacts with reclined occupants are rare but severe, and they are anticipated to become more common with the introduction of vehicles with automated driving capabilities. Computational and physical human surrogates are needed to design and evaluate injury countermeasures for reclined occupants, but the validity of such surrogates in a reclined posture is unknown. Experiments with post-mortem human subjects (PMHS) in a recline posture are needed both to define biofidelity targets for other surrogates and to describe the biomechanical response of reclined occupants in restrained frontal impacts. The goal of this study was to evaluate the kinematic and injury response of reclined PMHS in 30 g, 50 km/h frontal sled tests. Five midsize adult male PMHS were tested. A simplified semi-rigid seat with an anti-submarining pan and a non-production threepoint seatbelt (pre-tensioned, force-limited, seat-integrated) were used. Global motions and local accelerations of the head, pelvis, and multiple vertebrae were measured. Seat and seatbelt forces were also measured. Injuries were assessed via post-test dissection. The initial reclined posture aligned body regions (pelvis, lumbar spine, and ribcage) in a way that reduced the likelihood of effective restraint by the seat and seatbelt: the occupant's pelvis was initially rotated posteriorly, priming the occupant for submarining, and the lumbar spine was loaded in combined compression and bending due to the inertia of the upper torso during forward excursion. Coupled with the high restraining forces of the seat and seatbelt, the unfavorable kinematics resulted in injuries of the sacrum/coccyx (four of five PMHS injured), iliac wing (two of five PMHS injured), lumbar spine (three of five PMHS injured), and ribcage (all five PMHS suffered sternal fractures, and three of five PMHS suffered seven or more rib fractures). The kinematic and injury outcomes strongly motivate the development of injury criteria for the lumbar spine and pelvis, the inclusion of intrinsic variability (e.g., abdomen depth and pelvis shape) in computational simulations of frontal impacts with reclined occupants, and the adaptation of comprehensive restraint paradigms to predicted variability of occupant posture.
Asunto(s)
Accidentes de Tránsito , Cinturones de Seguridad , Aceleración , Adulto , Fenómenos Biomecánicos , Cadáver , Humanos , Masculino , Sujetos de InvestigaciónRESUMEN
Objective: Knee airbags (KABs) have become increasingly common in the vehicle fleet. Previous studies (Weaver et al., 2013, Patel et al. 2013) showed indications that KABs may be protective for some lower extremity injuries and associated with increased risk for others. Since KABs have become significantly more common in recent model year vehicles, we revisited these findings using the most recent available data.Methods: We compared injury rates below the knee, from the knee to the hip, and above the hip in years 2000-2015 of the National Automotive Sampling System, Crashworthiness Data System (NASS-CDS) and the Crash Injury Research and Engineering Network (CIREN). Injury rates were compared with matched analyses and with Bayesian multiple logistic regression.Results: Both analyses showed that KAB to have an Odds Ratio of approximately 0.6 for knee to hip injuries, with the Bayesian model strongly significant and the matched model borderline insignificant. In the Bayesian model, KAB was borderline significant for a decrease in above the waist injuries, while the matched model pointed toward a protective effect but was not significant. Both models pointed toward an increased risk of below knee injuries, but neither was statistically significant.Conclusions: Knee airbags may be protective for knee to hip injuries and above waist injuries. If KABs continue to be widely implemented in the vehicle fleet, the field should continue to monitor and evaluate below knee injuries.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Airbags , Rodilla/fisiología , Extremidad Inferior/lesiones , Heridas y Lesiones/epidemiología , Adulto , Teorema de Bayes , Fenómenos Biomecánicos , Femenino , Humanos , Extremidad Inferior/fisiología , Masculino , Persona de Mediana Edad , Adulto JovenRESUMEN
Far-side kinematics and injury are influenced by the occupant environment. The goal of the present study was to evaluate in-vehicle human far-side kinematics, kinetics and injury and to assess the ability of the WorldSID to represent them. A series of tests with five Post-Mortem Human Subjects and the WorldSID were conducted in a vehicle-based sled test environment. The surrogates were subjected to a far-side pulse of 16.5 g in a 75-degree impact direction. The PMHS were instrumented with 6 degree-of-freedom sensors to the head, spine and pelvis, a chestband, strain gauge rosettes, a 3D tracking array mounted to the head and multiple single 3D tracking markers on the rest of the body. The WorldSID lateral head excursion was consistent with the PMHS. However, forward head excursion did not follow a PMHS-like trajectory after the point of maximum lateral excursion. All but one PMHS retained the shoulder belt on the shoulder during the entire test. However, the WorldSID consistently slipped out of the shoulder belt. The PMHS sustained an average of five rib fractures for which the seatbelt was observed to be the largest contributor. The WorldSID showed a maximum rib deflection of 25 mm. The first rib fracture occurred no later than 50 ms into the event. Anatomical differences between the WorldSID and the PMHS rib cage prevented the WorldSID from capturing the injury mechanisms related to interactions of the occupant with the seatbelt and the seat.
Asunto(s)
Accidentes de Tránsito , Cinturones de Seguridad , Aceleración , Fenómenos Biomecánicos , Cadáver , Fracturas Óseas , Humanos , Heridas y LesionesRESUMEN
OBJECTIVE: Field data analyses often use either parametric or nonparametric means to describe the relationship between risk and various predictor variables. This study sought to evaluate a hybrid approach using semiconstrained multivariate nonlinear spline-based analysis. METHODS: Data were compiled from NASS-CDS years 1998-2015, selecting belted occupants age 16+ in collisions with a principal direction of force (PDOF) from 10 o'clock to 2 o'clock. Outcome measures included the incidence of Maximum Abbreviated Injury Scale (MAIS) 3+ injury in general and Abbreviated Injury Scale (AIS) 3+ rib fracture injury. Multivariate logistic regression models were fit controlling for PDOF, ΔV, vehicle model year, collision year, occupant age, occupant body mass index (BMI), and other select factors. Within the logistic regression models, each of the continuous variables was modeled with a 4-knot spline. These were compared to models treating ΔV and BMI linearly. RESULTS: A total of 29,667 occupants were observed from the query, representing approximately 13,608,398 occupants when weighted. Sixty percent of the AIS 3+ rib fracture cases occurred at ΔVs at or below 40 km/h. The median age for cases without AIS 3+ rib fracture was 34 years old. The median age for cases with AIS 3+ rib fracture was 62 years old. When modeled via nonlinear spline, the risk of MAIS 3+ injury in general and AIS 3+ rib fracture injury specifically exhibited a relationship with ΔV similar in shape to that observed in the linear model. In both cases, the spline model exhibited greater risk prediction over ΔVs from 25 to 50 km/h compared to the linear model (20-33% greater risk at ΔVs below 40 km/h) and less risk than the linear model at greater ΔVs. BMI exhibited a nonlinear, nonmonotonic relationship with both injury types studied. The risk tended to be a minimum at BMIs of 22-24 kg/m2, with an increase in risk at both higher and lower BMIs. For AIS 3+ rib fracture, the risk for a person with a BMI of 18 was approximately equal to the risk for a person with a BMI of 30, both being approximately 40% greater than the risk associated with a BMI of 24. CONCLUSIONS: Nonlinear multivariate regression methods have the potential to convey information about the risk-predictor relationship that cannot be captured through traditional linear modeling. These results suggest that traditional linear logistic regression models may underestimate the risk of AIS 3+ rib fracture injury in the ΔV range where they most frequently occur (below 50 km/h). Due to its nonmonotonic effect, traditional linear models may underestimate injury risk at both high and low BMIs.
Asunto(s)
Accidentes de Tránsito , Fracturas de las Costillas/etiología , Fracturas de las Costillas/patología , Escala Resumida de Traumatismos , Adolescente , Adulto , Anciano , Índice de Masa Corporal , Humanos , Persona de Mediana Edad , Análisis Multivariante , Dinámicas no Lineales , Fracturas de las Costillas/epidemiología , Riesgo , Adulto JovenRESUMEN
Player-to-player contact inherent in many unhelmeted sports means that head impacts are a frequent occurrence. Model-Based Image-Matching (MBIM) provides a technique for the assessment of three-dimensional linear and rotational motion patterns from multiple camera views of a head impact event, but the accuracy is unknown for this application. The goal of this study is to assess the accuracy of the MBIM method relative to reflective marker-based motion analysis data for estimating six degree of freedom head displacements and velocities in a staged pedestrian impact scenario at 40 km/h. Results showed RMS error was under 20 mm for all linear head displacements and 0.01-0.04 rad for head rotations. For velocities, the MBIM method yielded RMS errors between 0.42 and 1.29 m/s for head linear velocities and 3.53-5.38 rad/s for angular velocities. This method is thus beneficial as a tool to directly measure six degree of freedom head positional data from video of sporting head impacts, but velocity data is less reliable. MBIM data, combined in future with velocity/acceleration data from wearable sensors could be used to provide input conditions and evaluate the outputs of multibody and finite element head models for brain injury assessment of sporting head impacts.
Asunto(s)
Cabeza/fisiología , Modelos Biológicos , Deportes/fisiología , Traumatismos en Atletas/fisiopatología , Fenómenos Biomecánicos , Conmoción Encefálica/fisiopatología , Cabeza/diagnóstico por imagen , Humanos , Movimiento , Reproducibilidad de los Resultados , Factores de Riesgo , Estudios de Tiempo y MovimientoRESUMEN
Ligament sprains account for a majority of injuries to the foot and ankle complex among athletic populations. The infeasibility of measuring the in situ response and load paths of individual ligaments has precluded a complete characterization of their mechanical behavior via experiment. In the present study a fiber-based modeling approach of in situ ankle ligaments was developed and validated for determining the heterogeneous force-elongation characteristics and the consequent injury patterns. Nine major ankle ligaments were modeled as bundles of discrete elements, corresponding functionally to the structure of collagen fibers. To incorporate the progressive nature of ligamentous injury, the limit strain at the occurrence of fiber failure was described by a distribution function ranging from 12% to 18% along the width of the insertion site. The model was validated by comparing the structural kinetic and kinematic response obtained experimentally and computationally under well-controlled foot rotations. The simulation results replicated the 6 degree-of-freedom bony motion and ligamentous injuries and, by implication, the in situ deformations of the ligaments. Gross stiffness of the whole ligament derived from the fibers was comparable to existing experimental data. The present modeling approach provides a biomechanically realistic, interpretable and computationally efficient way to characterize the in situ ligament slack, sequential and heterogeneous uncrimping of collagen fascicles and failure propagation as the external load is applied. Applications of this model include functional ankle joint mechanics, injury prevention and countermeasure design for athletes.
Asunto(s)
Tobillo , Ligamentos Articulares/lesiones , Modelos Biológicos , Adulto , Tobillo/fisiopatología , Traumatismos del Tobillo/fisiopatología , Fenómenos Biomecánicos , Humanos , Ligamentos Articulares/fisiopatología , Masculino , Esguinces y Distensiones/fisiopatologíaRESUMEN
Ligament sprains, defined as tearing of bands of fibrous tissues within ligaments, account for a majority of injuries to the foot and ankle complex in field-based sports. External rotation of the foot is considered the primary injury mechanism of syndesmotic ankle sprains with concomitant flexion and inversion/eversion associated with particular patterns of ligament trauma. However, the influence of the magnitude and direction of loading vectors to the ankle on the in situ stress state of the ligaments has not been quantified in the literature. The objective of the present study was to search for the maximum injury tolerance of a human foot with an acceptable subfailure distribution of individual ligaments. We used a previously developed and comprehensively validated foot and ankle model to reproduce a range of combined foot rotation experienced during high-risk sports activities. Biomechanical computational investigation was performed on initial foot rotation from [Formula: see text] of plantar flexion to [Formula: see text] of dorsiflexion, and from [Formula: see text] of inversion to [Formula: see text] of eversion prior to external rotation. Change in initial foot rotation shifted injury initiation among different ligaments and resulted in a wide range of injury tolerances at the structural level (e.g., 36-125 Nm of rotational moment). The observed trend was in agreement with a parallel experimental study that initial plantar flexion decreased the incidence of syndesmotic injury compared to a neutral foot. A mechanism of distributing even loads across ligaments subjected to combined foot rotations was identified. This mechanism is potential to obtain the maximum load-bearing capability of a foot and ankle while minimizing the injury severity of ligaments. Such improved understanding of ligament injuries in athletes is necessary to facilitate injury management by clinicians and countermeasure development by biomechanists.
Asunto(s)
Tobillo/fisiopatología , Pie/fisiopatología , Ligamentos Articulares/fisiopatología , Rotación , Adulto , Fenómenos Biomecánicos , Humanos , Masculino , Tibia/fisiopatologíaRESUMEN
The Test Device for Human Occupant Restraint (THOR) 50th percentile male anthropomorphic test device (ATD) aims to improve the ability to predict the risk of chest injury to restrained automobile occupants by measuring dynamic chest deflection at multiple locations. This research aimed to describe the methods for developing a thoracic injury risk function (IRF) using the multi-point chest deflection metrics from the 50th percentile male THOR Metric ATD with the SD-3 shoulder and associating to post-mortem human subjects (PMHS) outcomes that were matched on identical frontal and frontal-oblique impact sled testing conditions. Several deflection metrics were assessed as potential predictor variables for AIS 3+ injury risk, including a combined metric, called PC Score, which was generated from a principal component analysis. A parametric survival analysis (specifically, accelerated failure time (AFT) with Weibull distribution) was assessed in the development of the IRF. Model fit was assessed using various modeling diagnostics, including the area under the receiver operating characteristic curve (AUC). Models based on resultant deflection consistently exhibited improved fit compared to models based on x-axis deflection or chord deflection. Risk functions for the THOR PC Score and Cmax (maximum resultant deflection) were qualitatively equivalent, producing AUCs of 0.857 and 0.861, respectively. Adjusting for the potential confounding effects of age, AFT survival models with Cmax or PC Score as the primary deflection metric resulted in the THOR injury risk models with the best combination of biomechanical appropriateness, potential utility and model fit, and may be recommended as injury predictors.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Maniquíes , Traumatismos Torácicos/prevención & control , Escala Resumida de Traumatismos , Factores de Edad , Anciano , Anciano de 80 o más Años , Conducción de Automóvil/estadística & datos numéricos , Fenómenos Biomecánicos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Curva ROC , Factores de Riesgo , Cinturones de SeguridadRESUMEN
OBJECTIVE: The goal of this study was to evaluate the biofidelity of the Total Human Model for Safety (THUMS; Ver. 4.01) pedestrian finite element models (PFEM) in a whole-body pedestrian impact condition using a well-characterized generic pedestrian buck model. METHODS: The biofidelity of THUMS PFEM was evaluated with respect to data from 3 full-scale postmortem human subject (PMHS) pedestrian impact tests, in which a pedestrian buck laterally struck the subjects using a pedestrian buck at 40 km/h. The pedestrian model was scaled to match the anthropometry of the target subjects and then positioned to match the pre-impact postures of the target subjects based on the 3-dimensional motion tracking data obtained during the experiments. An objective rating method was employed to quantitatively evaluate the correlation between the responses of the models and the PMHS. Injuries in the models were predicted both probabilistically and deterministically using empirical injury risk functions and strain measures, respectively, and compared with those of the target PMHS. RESULTS: In general, the model exhibited biofidelic kinematic responses (in the Y-Z plane) regarding trajectories (International Organization for Standardization [ISO] ratings: Y = 0.90 ± 0.11, Z = 0.89 ± 0.09), linear resultant velocities (ISO ratings: 0.83 ± 0.07), accelerations (ISO ratings: Y = 0.58 ± 0.11, Z = 0.52 ± 0.12), and angular velocities (ISO ratings: X = 0.48 ± 0.13) but exhibited stiffer leg responses and delayed head responses compared to those of the PMHS. This indicates potential biofidelity issues with the PFEM for regions below the knee and in the neck. The model also demonstrated comparable reaction forces at the buck front-end regions to those from the PMHS tests. The PFEM generally predicted the injuries that the PMHS sustained but overestimated injuries in the ankle and leg regions. CONCLUSIONS: Based on the data considered, the THUMS PFEM was considered to be biofidelic for this pedestrian impact condition and vehicle. Given the capability of the model to reproduce biomechanical responses, it shows potential as a valuable tool for developing novel pedestrian safety systems.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Maniquíes , Modelos Biológicos , Peatones , Aceleración , Fenómenos Biomecánicos , Cadáver , Humanos , Masculino , Reproducibilidad de los Resultados , Caminata/lesiones , Heridas y Lesiones/etiologíaRESUMEN
The purpose of this study was to determine the long-time and transient characteristics of the moment generated by external (ER) and internal (IR) rotation of the calcaneus with respect to the tibia. Two human cadaver legs were disarticulated at the knee joint while maintaining the connective tissue between the tibia and fibula. An axial rotation of 21° was applied to the proximal tibia to generate either ER or IR while the fibula was unconstrained and the calcaneus was permitted to translate in the transverse plane. These boundary conditions were intended to allow natural motion of the fibula and for the effective applied axis of rotation to move relative to the ankle and subtalar joints based on natural articular motions among the tibia, fibula, talus, and calcaneus. A load cell at the proximal tibia measured all components of force and moment. A quasi-linear model of the moment along the tibia axis was developed to determine the transient and long-time loads generated by this ER/IR. Initially neutral, everted, inverted, dorsiflexed, and plantarflexed foot orientations were tested. For the neutral position, the transient elastic moment was 16.5N-m for one specimen and 30.3N-m for the other in ER with 26.3 and 32.1N-m in IR. The long-time moments were 5.5 and 13.2N-m (ER) and 9.0 and 9.5N-m (IR). These loads were found to be transient over time similar to previous studies on other biological structures where the moment relaxed as time progressed after the initial ramp in rotation.
Asunto(s)
Huesos de la Extremidad Inferior/fisiología , Pie/fisiología , Adulto , Articulación del Tobillo/fisiología , Cadáver , Humanos , Cinética , Articulación de la Rodilla/fisiología , Masculino , Persona de Mediana Edad , Rango del Movimiento Articular , Rotación , Articulación Talocalcánea/fisiologíaRESUMEN
The mechanical behavior of ankle ligaments at the structural level can be characterized by force-displacement curves in the physiologic phase up to the initiation of failure. However, these properties are difficult to characterize in vitro due to the experimental difficulties in replicating the complex geometry and non-uniformity of the loading state in situ. This study used a finite element parametric modeling approach to determine the in situ mechanical behavior of ankle ligaments at neutral foot position for a mid-sized adult foot from experimental derived bony kinematics. Nine major ankle ligaments were represented as a group of fibers, with the force-elongation behavior of each fiber element characterized by a zero-force region and a region of constant stiffness. The zero-force region, representing the initial tension or slackness of the whole ligament and the progressive fiber uncrimping, was identified against a series of quasi-static experiments of single foot motion using simultaneous optimization. A range of 0.33-3.84mm of the zero-force region was obtained, accounting for a relative length of 6.7±3.9%. The posterior ligaments generally exhibit high-stiffness in the loading region. Following this, the ankle model implemented with in situ ligament behavior was evaluated in response to multiple loading conditions and proved capable of predicting the bony kinematics accurately in comparison to the cadaveric response. Overall, the parametric ligament modeling demonstrated the feasibility of linking the gross structural behavior and the underlying bone and ligament mechanics that generate them. Determination of the in situ mechanical properties of ankle ligaments provides a better understanding of the nonlinear nature of the ankle joint. Applications of this knowledge include functional ankle joint mechanics and injury biomechanics.
Asunto(s)
Articulación del Tobillo/fisiología , Ligamentos Articulares/fisiología , Modelos Biológicos , Tobillo , Fenómenos Biomecánicos , Análisis de Elementos Finitos , HumanosRESUMEN
OBJECTIVE: Occupants with extreme body size and shape, such as the small female or the obese, were reported to sustain high risk of injury in motor vehicle crashes (MVCs). Dimensional scaling approaches are widely used in injury biomechanics research based on the assumption of geometrical similarity. However, its application scope has not been quantified ever since. The objective of this study is to demonstrate the valid range of scaling approaches in predicting the impact response of the occupants with focus on the vulnerable populations. METHODS: The present analysis was based on a data set consisting of 60 previously reported frontal crash tests in the same sled buck representing a typical mid-size passenger car. The tests included two categories of human surrogates: 9 postmortem human surrogates (PMHS) of different anthropometries (stature range: 147-189 cm; weight range: 27-151 kg) and 5 anthropomorphic test devices (ATDs). The impact response was considered including the restraint loads and the kinematics of multiple body segments. For each category of the human surrogates, a mid-size occupant was selected as a baseline and the impact response was scaled specifically to another subject based on either the body mass (body shape) or stature (the overall body size). To identify the valid range of the scaling approach, the scaled response was compared to the experimental results using assessment scores on the peak value, peak timing (the time when the peak value occurred), and the overall curve shape ranging from 0 (extremely poor) to 1 (perfect match). Scores of 0.7 to 0.8 and 0.8 to 1.0 indicate fair and acceptable prediction. RESULTS: For both ATDs and PMHS, the scaling factor derived from body mass proved an overall good predictor of the peak timing for the shoulder belt (0.868, 0.829) and the lap belt (0.858, 0.774) and for the peak value of the lap belt force (0.796, 0.869). Scaled kinematics based on body stature provided fair or acceptable prediction on the overall head/shoulder kinematics (0.741, 0.822 for the head; 0.817, 0.728 for the shoulder) regardless of the anthropometry. The scaling approach exhibited poor prediction capability on the curve shape for the restraint force (0.494 and 0.546 for the shoulder belt; 0.585 and 0.530 for the lap belt). It also cannot well predict the excursion of the pelvis and the knee. CONCLUSIONS: The results revealed that for the peak lap belt force and the forward motion of the head and shoulder, the underlying linear relationship with body size and shape is valid over a wide anthropometric range. The chaotic nature of the dynamic response cannot be fully recovered by the assumption of the whole-body geometrical similarity, especially for the curve shape. The valid range of the scaling approach established in this study can be reasonably referenced in predicting the impact response of a given specific population with expected deviation. Application of this knowledge also includes proposing strategies for restraint configuration and providing reference for ATD and/or human body model (HBM) development for vulnerable occupants.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Predicción/métodos , Cabeza/fisiología , Rodilla/fisiología , Pelvis/fisiología , Cinturones de Seguridad , Hombro/fisiología , Anciano , Fenómenos Biomecánicos , Cadáver , Femenino , Humanos , Masculino , Maniquíes , Persona de Mediana Edad , Reproducibilidad de los Resultados , Poblaciones Vulnerables , Soporte de Peso/fisiologíaRESUMEN
OBJECTIVE: The goal of this study was to investigate the influence of the occupant characteristics on seat belt force vs. payout behavior based on experiment data from different configurations in frontal impacts. METHODS: The data set reviewed consists of 58 frontal sled tests using several anthropomorphic test devices (ATDs) and postmortem human subjects (PMHS), restrained by different belt systems (standard belt, SB; force-limiting belt, FLB) at 2 impact severities (48 and 29 km/h). The seat belt behavior was characterized in terms of the shoulder belt force vs. belt payout behavior. A univariate linear regression was used to assess the factor significance of the occupant body mass or stature on the peak tension force and gross belt payout. RESULTS: With the SB, the seat belt behavior obtained by the ATDs exhibited similar force slopes regardless of the occupant size and impact severities, whereas those obtained by the PMHS were varied. Under the 48 km/h impact, the peak tension force and gross belt payout obtained by ATDs was highly correlated to the occupant stature (P =.03, P =.02) and body mass (P =.05, P =.04), though no statistical difference with the stature or body mass were noticed for the PMHS (peak force: P =.09, P =.42; gross payout: P =.40, P =.48). With the FLB under the 48 km/h impact, highly linear relationships were noticed between the occupant body mass and the peak tension force (R(2) = 0.9782) and between the gross payout and stature (R(2) = 0.9232) regardless of the occupant types. CONCLUSIONS: The analysis indicated that the PMHS characteristics showed a significant influence on the belt response, whereas the belt response obtained with the ATDs was more reproducible. The potential cause included the occupant anthropometry, body mass distribution, and relative motion among body segments specific to the population variance. This study provided a primary data source to understand the biomechanical interaction of the occupant with the restraint system. Further research is necessary to consider these effects in the computational studies and optimized design of the restraint system in a more realistic manner.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Antropometría , Cinturones de Seguridad , Aceleración , Fenómenos Biomecánicos , Cadáver , Humanos , ManiquíesRESUMEN
To serve as tools for assessing injury risk, the biofidelity of whole-body pedestrian impact dummies should be validated against reference data from full-scale pedestrian impact tests. To facilitate such evaluations, a simplified generic vehicle-buck has been recently developed that is designed to have characteristics representative of a generic small sedan. Three 40 km/h pedestrian-impact tests have been performed, wherein Post Mortem Human Surrogates (PMHS) were struck laterally in a mid-gait stance by the buck. Corridors for select trajectory measures derived from these tests have been published previously. The goal of this study is to act as a companion dataset to that study, describing the head velocities, body region accelerations (head, spine, pelvis, lower extremities), angular velocities, and buck interaction forces, and injuries observed during those tests. Scaled, transformed head accelerations exceeded 80 g prior to head contact with the windshield for two of the three tests. Head xaxis angular velocity exceeded 40 rad/s prior to head contact for all three tests. In all cases the peak resultant head velocity relative to the vehicle was greater than the initial impact speed of the vehicle. Corridors of resultant head velocity relative to the vehicle were also developed, bounded by the velocities observed in these tests combined with those predicted to occur if the PMHS necks were perfectly rigid. These results, along with the other kinematic and kinetic data presented, provide a resource for future pedestrian dummy development and evaluation.