Reductive Dissolution of NCM Cathode through Anaerobic Respiration by Shewanella putrefaciens.

The consumption of lithium-ion batteries (LIBs) has considerably increased over the past decade, leading to a rapid increase in the number of spent LIBs. Exposing spent LIBs to the environment can cause serious environmental harm; however, there is a lack of experimentally obtained information regarding the environmental impacts of abandoned cathode materials. Here, we report the interactions between Shewanella putrefaciens, a microorganism commonly found in diverse low-oxygen natural settings, and LiNi0.6Co0.2Mn0.2O2 (NCM622) under anaerobic conditions. We present compelling evidence that the anaerobic respiration of Shewanella putrefaciens triggers ∼59 and ∼78% dissolution of 0.2 g/L pristine and spent NCM622, respectively. We observed that Shewanella putrefaciens interacted with the pristine and the spent NCM622 under anaerobic conditions at a neutral pH and room temperature and induced the reduction of Ni, Co, and Mn, resulting in the subsequent dissolution of Li, Ni, Co, and Mn. Moreover, we found that secondary mineralization occurred on the surface of reacted NCM622. These findings not only shed light on the substantial impact of microbial respiration on the fate of discarded cathode materials in anaerobic environments but also reveal the potential for sustainable bioleaching of cathodes in spent LIBs.

Multiplexable and Scalable Aqueous Synthesis Platform for Oleate-Based, Bilayer-Coated Gold Nanoparticles.

Despite gold-based nanomaterials having a unique role in nanomedicine, among other fields, synthesis limitations relating to reaction scale-up and control result in prohibitively high gold nanoparticle costs. In this work, a new preparation procedure for lipid bilayer-coated gold nanoparticles in water is presented, using sodium oleate as reductant and capping agent. The seed-free synthesis not only allows for size precision (8-30 nm) but also remarkable particle concentration (10 mm Au). These reaction efficiencies allow for multiplexing and reaction standardization in 96-well plates using conventional thermocyclers, in addition to simple particle purification via microcentrifugation. Such a multiplexing approach also enables detailed spectroscopic investigation of the nonlinear growth process and dynamic sodium oleate/oleic acid self-assembly. In addition to scalability (at gram-level), resulting gold nanoparticles are stable at physiological pH, in common cell culture media, and are autoclavable. To demonstrate the versatility and applicability of the reported method, a robust ligand exchange with thiolated polyethylene glycol analogues is also presented.

Total organic carbon measurements reveal major gaps in petrochemical emissions reporting.

Anthropogenic organic carbon emissions reporting has been largely limited to subsets of chemically speciated volatile organic compounds. However, new aircraft-based measurements revealed total gas-phase organic carbon emissions that exceed oil sands industry-reported values by 1900% to over 6300%, the bulk of which was due to unaccounted-for intermediate-volatility and semivolatile organic compounds. Measured facility-wide emissions represented approximately 1% of extracted petroleum, resulting in total organic carbon emissions equivalent to that from all other sources across Canada combined. These real-world observations demonstrate total organic carbon measurements as a means of detecting unknown or underreported carbon emissions regardless of chemical features. Because reporting gaps may include hazardous, reactive, or secondary air pollutants, fully constraining the impact of anthropogenic emissions necessitates routine, comprehensive total organic carbon monitoring as an inherent check on mass closure.

Harnessing the potential of in-situ, electrically generated microbubbles via nickel foam for enhanced, low energy membrane fouling control.

For membrane-based, water treatment technologies, fouling remains a significant challenge for pressure-driven processes. While many antifouling strategies have been proposed, there remains significant room for improved efficiency. Direct application of microbubbles (MBs) at a membrane surface offers a promising approach for managing interfacial fouling through continuous physical interaction(s). Despite such potential, to date, integration and optimization of in-situ generated MBs at the membrane interface that are both highly antifouling with minimal energy inputs and unwanted side reactions remains mostly outstanding. Here we demonstrate the application of conductive, porous nickel foam for electrolysis-based generation of hydrogen microbubbles at an ultra-filtration (UF) membrane interface, which significantly mitigates membrane fouling for a range of model foulants. System characterization and optimization includes comparison of metal foams (Ni, Cu, Ti), faradic efficiencies, hydrogen evolution reaction (HER) curves, cyclic voltammetry, and quantification of hydrogen gas flux and bubble size, as a function of applied current. When optimized, we report rapid (<5 min) and near complete (∼99 %) flux recovery for three classes of foulants, including calcium alginate, humic acid (HA), and SiO2 particles. For all, the described MB-based approach is orders of magnitude more energy efficient when compared to conventional cleaning strategies. Finally, we demonstrate the MB-based regeneration/cleaning process is stable and repeatable for ten cycles and also highly effective for a challenge water (as a model oilfield brine). Taken together, this work presents a novel and efficient approach for the application of in-situ electrically generated MBs to support sustainable pressure-driven membrane processes.

Nanobubble Reactivity: Evaluating Hydroxyl Radical Generation (or Lack Thereof) under Ambient Conditions.

Nanobubble (NB) generation of reactive oxygen species (ROS), especially hydroxyl radical (·OH), has been controversial. In this work, we extensively characterize NBs in solution, with a focus on ROS generation (as ·OH), through a number of methods including degradation of ·OH-specific target compounds, electron paramagnetic resonance (EPR), and a fluorescence-based indicator. Generated NBs exhibit consistent physical characteristics (size, surface potential, and concentration) when compared with previous studies. For conditions described, which are considered as high O2 NB concentrations, no degradation of benzoic acid (BA), a well-studied ·OH scavenger, was observed in the presence of NBs (over 24 h) and no EPR signal for ·OH was detected. While a positive fluorescence response was measured when using a fluorescence probe for ·OH, aminophenyl fluorescein (APF), we provide an alternate explanation for the result. Gas/liquid interfacial characterization indicates that the surface of a NB is proton-rich and capable of inducing acid-catalyzed hydrolysis of APF, which results in a false (positive) fluorescence response. Given these negative results, we conclude that NB-induced ·OH generation is minimal, if at all, for conditions evaluated.

Superparamagnetic Iron Oxide Nanoparticles as Additives for Microwave-Based Sludge Prehydrolysis: A Perspective.

Wastewater treatment plants are critical for environmental pollution control. The role that they play in protecting the environment and public health is unquestionable; however, they produce massive quantities of excess sludge as a byproduct. One pragmatic approach to utilizing excess sludge is generating methane via anaerobic digestion. For this, a prehydrolysis step can significantly improve digestion by increasing biogas quality and quantity while decreasing final sludge volumes. One of the many prehydrolysis approaches is to deliver heat into sludge via microwave irradiation. Microwave-absorbing additives can be used to further enhance thermal degradation processes. However, the implications of such an approach include potential release of said additive materials into the environment via digested sludge. In this perspective, we present and discuss the potential of superparamagnetic iron oxide nanoparticles (SPIONs) as recoverable, hyperreactive microwave absorbers for sludge prehydrolysis. Due to their size and characteristics, SPIONs pack spin electrons within a single domain that can respond to the magnetic field without remanence magnetism. SPIONs have properties of both paramagnetic and ferromagnetic materials with little to no magnetic hysteresis, which can enable their rapid recovery from slurries, even in complicated reactor installations. Further, SPIONs are excellent microwave absorbers, which result in high local heat gradients. This perspective introduces the vision that SPION properties can be tuned for desirable dielectric heating and magnetic responses while maintaining material integrity to accomplish repeated use for microwave-enhanced pretreatment.

Microbial Reductive Dechlorination by a Commercially Available Dechlorinating Consortium Is Not Inhibited by Perfluoroalkyl Acids (PFAAs) at Field-Relevant Concentrations.

Perfluoroalkyl acids (PFAAs) have been shown to inhibit biodegradation (i.e., organohalide respiration) of chlorinated ethenes. The potential negative impacts of PFAAs on microbial species performing organohalide respiration, particularly Dehalococcoides mccartyi (Dhc), and the efficacy of in situ bioremediation are a critical concern for comingled PFAA-chlorinated ethene plumes. Batch reactor (no soil) and microcosm (with soil) experiments, containing a PFAA mixture and bioaugmented with KB-1, were completed to assess the impact of PFAAs on chlorinated ethene organohalide respiration. In batch reactors, PFAAs delayed complete biodegradation of cis-1,2-dichloroethene (cis-DCE) to ethene. Maximum substrate utilization rates (a metric for quantifying biodegradation rates) were fit to batch reactor experiments using a numerical model that accounted for chlorinated ethene losses to septa. Fitted values for cis-DCE and vinyl chloride biodegradation were significantly lower (p < 0.05) in batch reactors containing ≥50 mg/L PFAAs. Examination of reductive dehalogenase genes implicated in ethene formation revealed a PFAA-associated change in the Dhc community from cells harboring the vcrA gene to those harboring the bvcA gene. Organohalide respiration of chlorinated ethenes was not impaired in microcosm experiments with PFAA concentrations of 38.7 mg/L and less, suggesting that a microbial community containing multiple strains of Dhc is unlikely to be inhibited by PFAAs at lower, environmentally relevant concentrations.

Trace analysis of per- and polyfluorinated alkyl substances (PFAS) in dried blood spots - Demonstration of reproducibility and comparability to venous blood samples.

Per- and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals that have been widely used in consumer, personal care, and household products for their stain- and water-repellent properties. PFAS exposure has been linked to various adverse health outcomes. Such exposure has commonly been evaluated in venous blood samples. While this sample type can be obtained from healthy adults, a less invasive method of blood collection is required when evaluating vulnerable populations. Dried blood spots (DBS) have gained attention as a biomatrix for exposure assessment given the relative ease of collection, transport, and storage. The objective of this study was to develop and validate an analytical method to measure PFAS in DBS. A workflow is presented for extracting PFAS from DBS, chemical analysis by liquid chromatography-high resolution mass spectrometry, normalization for blood mass, and blank correction to account for potential contamination. Over 80 % recovery was achieved for the 22 PFAS measured with an average coefficient of variation of 14 %. Comparison of PFAS concentrations detected in DBS and paired whole blood samples from six healthy adults was correlated (R2 > 0.9). Findings demonstrate trace levels of a broad range of PFAS in DBS can be reproducibly measured and are comparable to liquid whole blood samples. DBS can offer novel insights to environmental exposures, including during critical windows of susceptibility (i.e., in utero, early life), which have been largely uncharacterized.

In-situ sequestration of perfluoroalkyl substances using polymer-stabilized ion exchange resin.

Remediation of groundwater impacted by per- and polyfluoroalkyl substances (PFAS) is challenging due to the strength of the carbon-fluorine bond and the need to achieve nanogram per liter drinking water targets. Previous studies have shown that ion exchange resins can serve as effective sorbents for the removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) in conventional water treatment systems. The objectives of this study were to evaluate the in situ delivery and PFAS sorption capacity of a polymer-stabilized ion exchange resin (S-IXR) consisting of Amberlite® IRA910 beads and Pluronic® F-127 in a quartz sand. At concentrations below 100 µg/L, individual and mixed PFAS adsorption on resin beads exhibited linear isotherms with no apparent competitive effects. However, at concentrations up to 100 mg/L, PFAS adsorption isotherms were non-linear and a mixture of six PFAS exhibited strong competitive effects. In columns packed with 40-50 mesh Ottawa sand, injection of the S-IXR suspension created a uniform sorptive zone that increased PFOA or PFOS retention by more than five orders-of-magnitude compared to untreated control columns. Multi-solute column studies revealed earlier breakthrough of shorter-chain length PFAS, which was consistent with the mixed PFAS adsorption data. These findings indicate that injectable ion exchange resins could provide an effective in situ remediation strategy for PFAS-impacted groundwater plumes.

Photoactive Polyethylenimine-Coated Graphene Oxide Composites for Enhanced Cr(VI) Reduction and Recovery.

The application of positively charged polymers is a common treatment strategy for the sorption and separation of dissolved hexavalent chromium Cr(VI). In particular, polyethylenimine (PEI) has been demonstrated as an effective polymer for Cr treatment due to abundant amine groups and cost-effectiveness. However, PEI as a photoactive polymer has not been previously explored for Cr treatment. Toward this, we demonstrate the significant photoactive potential of PEI for Cr sorption and reduction [to Cr (III)], delineating amine structure-function relationships. Overall, Cr(VI) photoreduction is enhanced dramatically as a function of amine group density. Additionally, among the types of amine groups evaluated, tertiary amines are observed to be the most reactive followed by secondary and primary amines. When PEI is incorporated onto graphene oxide (GO) as a stabilizing scaffold, mass loading of PEI is a key variable for Cr(VI) treatment performance, which is observed to be a function of PEI molecular weight and oxidation extent of GO. Finally, when combined with magnetic nanomaterials, low energy, high efficiency separation, and reuse are demonstrated. For these, sorption-based separation processes maintained excellent performance over five cycles. Taken together, this work demonstrates that PEI can serve as highly effective, multifunctional material coating(s) not only for chromium treatment but potentially for other oxidized aqueous species as well.

Yale School of Public Health Symposium: An overview of the challenges and opportunities associated with per- and polyfluoroalkyl substances (PFAS).

On December 13, 2019, the Yale School of Public Health hosted a symposium titled "Per- and Polyfluoroalkyl Substances (PFAS): Challenges and Opportunities" in New Haven, Connecticut. The meeting focused on the current state of the science on these chemicals, highlighted the challenges unique to PFAS, and explored promising opportunities for addressing them. It brought together participants from Yale University, the National Institute of Environmental Health Sciences, the University of Massachusetts Amherst, the University of Connecticut, the Connecticut Agricultural Experiment Station, the Connecticut Departments of Public Health and Energy and Environmental Protection, and the public and private sectors. Presentations during the symposium centered around several primary themes. The first reviewed the current state of the science on the health effects associated with PFAS exposure and noted key areas that warranted future research. As research in this field relies on specialized laboratory analyses, the second theme considered commercially available methods for PFAS analysis as well as several emerging analytical approaches that support health studies and facilitate the investigation of a broader range of PFAS. Since mitigation of PFAS exposure requires prevention and cleanup of contamination, the third theme highlighted new nanotechnology-enabled PFAS remediation technologies and explored the potential of green chemistry to develop safer alternatives to PFAS. The fourth theme covered collaborative efforts to assess the vulnerability of in-state private wells and small public water supplies to PFAS contamination by adjacent landfills, and the fifth focused on strategies that promote successful community engagement. This symposium supported a unique interdisciplinary coalition established during the development of Connecticut's PFAS Action Plan, and discussions occurring throughout the symposium revealed opportunities for collaborations among Connecticut scientists, state and local officials, and community advocates. In doing so, it bolstered the State of Connecticut's efforts to implement the ambitious initiatives that its PFAS Action Plan recommends.

Pharmacological Comparison of Mitragynine and 7-Hydroxymitragynine: In Vitro Affinity and Efficacy for µ-Opioid Receptor and Opioid-Like Behavioral Effects in Rats.

Relationships between µ-opioid receptor (MOR) efficacy and effects of mitragynine and 7-hydroxymitragynine are not fully established. We assessed in vitro binding affinity and efficacy and discriminative stimulus effects together with antinociception in rats. The binding affinities of mitragynine and 7-hydroxymitragynine at MOR (Ki values 77.9 and 709 nM, respectively) were higher than their binding affinities at κ-opioid receptor (KOR) or δ-opioid receptor (DOR). [35S]guanosine 5'-O-[γ-thio]triphosphate stimulation at MOR demonstrated that mitragynine was an antagonist, whereas 7-hydroxymitragynine was a partial agonist (Emax = 41.3%). In separate groups of rats discriminating either morphine (3.2 mg/kg) or mitragynine (32 mg/kg), mitragynine produced a maximum of 72.3% morphine-lever responding, and morphine produced a maximum of 65.4% mitragynine-lever responding. Other MOR agonists produced high percentages of drug-lever responding in the morphine and mitragynine discrimination assays: 7-hydroxymitragynine (99.7% and 98.1%, respectively), fentanyl (99.7% and 80.1%, respectively), buprenorphine (99.8% and 79.4%, respectively), and nalbuphine (99.4% and 98.3%, respectively). In the morphine and mitragynine discrimination assays, the KOR agonist U69,593 produced maximums of 72.3% and 22.3%, respectively, and the DOR agonist SNC 80 produced maximums of 34.3% and 23.0%, respectively. 7-Hydroxymitragynine produced antinociception; mitragynine did not. Naltrexone antagonized all of the effects of morphine and 7-hydroxymitragynine; naltrexone antagonized the discriminative stimulus effects of mitragynine but not its rate-decreasing effects. Mitragynine increased the potency of the morphine discrimination yet decreased morphine antinociception. Here we illustrate striking differences in MOR efficacy, with mitragynine having less than 7-hydroxymitragynine. SIGNIFICANCE STATEMENT: At human µ-opioid receptor (MOR) in vitro, mitragynine has low affinity and is an antagonist, whereas 7-hydroxymitragynine has 9-fold higher affinity than mitragynine and is an MOR partial agonist. In rats, intraperitoneal mitragynine exhibits a complex pharmacology including MOR agonism; 7-hydroxymitragynine has higher MOR potency and efficacy than mitragynine. These results are consistent with 7-hydroxymitragynine being a highly selective MOR agonist and with mitragynine having a complex pharmacology that combines low efficacy MOR agonism with activity at nonopioid receptors.

A graphene oxide Cookbook: Exploring chemical and colloidal properties as a function of synthesis parameters.

Herein, we describe the synthesis of graphene oxide (GO) over a large range of conditions, exploring the effects of reaction temperature, reaction time, oxidant ratio, and sonication time on the chemical and colloidal properties of the product. As a function of reaction parameters, modified from Hummers' method, GO products were characterized and described via a suite of spectroscopic, structural, and morphological techniques, including TEM, UV-vis spectroscopy, XPS, Raman spectroscopy, FTIR, and DLS. Average carbon oxidation state and the yield (upon sonication) were chosen as the two criteria to evaluate synthesized GO materials. It was observed that as reaction temperature increased, GO oxidation state and yield of the sonication step both increased. Further, increasing reaction time and oxidant ratio not only increased the oxidation state, but also had a pronounced effect on the final yield. As synthesized, GO with higher degrees of oxidization exhibited higher negative ζ-potential, slightly smaller hydrodynamic diameter, and higher critical coagulation concentration(s). Data sets collectively demonstrate that carbon oxidation state, functional group ratios, and the aggregation kinetics of GO products can be readily controlled by varying processing time and conditions with expected changes in aqueous behavior(s), including stability/aggregation.

Intrapore energy barriers govern ion transport and selectivity of desalination membranes.

State-of-the-art desalination membranes exhibit high water-salt selectivity, but their ability to discriminate between ions is limited. Elucidating the fundamental mechanisms underlying ion transport and selectivity in subnanometer pores is therefore imperative for the development of ion-selective membranes. Here, we compare the overall energy barrier for salt transport and energy barriers for individual ion transport, showing that cations and anions traverse the membrane pore in an independent manner. Supported by density functional theory simulations, we demonstrate that electrostatic interactions between permeating counterion and fixed charges on the membrane substantially hinder intrapore diffusion. Furthermore, using quartz crystal microbalance, we break down the contributions of partitioning at the pore mouth and intrapore diffusion to the overall energy barrier for salt transport. Overall, our results indicate that intrapore diffusion governs salt transport through subnanometer pores due to ion-pore wall interactions, providing the scientific base for the design of membranes with high ion-ion selectivity.

Graphene oxide/mussel foot protein composites for high-strength and ultra-tough thin films.

Graphene oxide (GO)-based composite materials have become widely popular in many applications due to the attractive properties of GO, such as high strength and high electrical conductivity at the nanoscale. Most current GO composites use organic polymer as the matrix material and thus, their synthesis suffers from the use of organic solvents or surfactants, which raise environmental and energy-consumption concerns. Inspired by mussel foot proteins (Mfp) secreted by the saltwater mussel, Mytilus galloprovincialis and by recent advances in microbial protein production, we developed an aqueous-based green synthesis strategy for preparing GO/Mfp film composites. These GO/Mfp films display high tensile strength (134-158 MPa), stretchability (~ 26% elongation), and high toughness (20-24 MJ/m3), beyond the capabilities of many existing GO composites. Renewable production of Mfp proteins and the facile fabrication process described provides a new avenue for composite material synthesis, while the unique combination of mechanical properties of GO/Mfp films will be attractive for a range of applications.

Surface-Engineered Nanomaterials in Water: Understanding Critical Dynamics of Soft Organic Coatings and Relative Aggregation Density.

Inorganic-organic nanocomposites, typically as an inorganic core with surface organic coating(s), have received interest as potential platform materials for sensor, catalyst, sorbent, and environmental applications, among others. Here, we describe the critical role of organic surface coatings with regard to the colloidal stability of engineered manganese oxide nanoparticles (MnxOy NPs). Specifically, we prepared libraries of monodisperse MnxOy NPs with a serial selection of surface coatings (stearic acid (SA), oleic acid (OA), poly(maleic anhydride-alt-1-octadecene) (PMAO), linear polyethyleneimine (LPEI), and multibranched polyethyleneimine (BPEI)), which were chosen based on comparable structure(s) and functional group(s). We systematically evaluated the role of surface organic coatings via critical coagulation concentrations (CCCs), which were compared with theoretical calculations (Schulze-Hardy rule). Through a newly developed light scattering protocol, we observed that the effective density of nanoclusters can exceed NPs' primary (bulk) density depending on the open space(s) within organic coatings. Interestingly, PMAO-coated NPs were more stable at the point of zero charge (PZC) than at neutral pH (pH 7), despite the loss of effective surface charge potential. CCC was 334 mM in NaCl and 1.5 mM in CaCl2 at pH 7, compared to CCC values of 807 mM in NaCl and 210 mM in CaCl2 at PZC. This increase in stability is due to polymer (re)configuration (at PZC), which was further confirmed with a quartz crystal microbalance-based technique to evaluate surface-based polymer dynamics. Taken together, this work quantifies the role of organic coating dynamics, including structure, grafting density, and configuration on the colloidal stability of organic-coated NPs.

Delineating the Relationship between Nanoparticle Attachment Efficiency and Fluid Flow Velocity.

The ability to fundamentally describe nanoparticle (NP) transport in the subsurface underpins environmental risk assessment and successful material applications, including advanced remediation and sensing technologies. Despite considerable progress, our understanding of NP deposition behavior remains incomplete as there are conflicting reports regarding the effect of fluid flow velocity on attachment efficiency. To directly address this and more accurately describe NP attachment behavior, we have developed a novel protocol using a quartz crystal microbalance with dissipation monitoring (QCM-D) to separate and individually observe deposition mechanisms (diffusion and sedimentation), providing in situ, real-time information about particle diffusion (from the bulk liquid to solid surface). Through this technique, we have verified that the approaching velocity of NPs via diffusion increases (0.8-6.7 µm/s) with increasing flow velocity (6.1-106.0 µm/s), leading to an increased NP kinetic energy, thus affecting deposition processes. Further, in the presence of a secondary energy minimum associated with organic surface coatings, secondary minimum deposition decreases and primary minimum deposition increases with the flow velocity. NPs deposited at the primary minimum are relatively more resistant to hydrodynamic energies (including detachment associated energies), resulting in an increase of observed attachment efficiencies. Taken together, this work not only describes a novel method to delineate and quantify physical processes underpinning particle behavior but also provides direct measurements regarding key factors defining the relationship(s) of flow velocity and particle attachment. Such insight is valuable for next-generation fate and transport model accuracy, especially under unfavorable attachment regimes, which is a current and critical need for subsurface material applications and implication paradigms.

Organic Functionalized Graphene Oxide Behavior in Water.

Surface modified graphene oxide (GO) has received broad interest as a potential platform material for sensors, membranes, and sorbents, among other environmental applications. However, compared to parent (unmodified) GO, there is a dearth of information regarding the behavior of subsequently (secondary) modified GO, other than bulk natural organic matter (NOM) coating(s). Here, we systematically explore the critical role of organic functionalization with respect to GO stability in water. Specifically, we synthesized a matrix of GO-based materials considering a carefully chosen range of bound organic molecules (hydrophobic coatings: propylamine, tert-octylamine, and 1-adamantylamine; hydrophilic coatings: 3-amino-1-propanol and 3-amino-1-adamantanol), so that chemical structures and functional groups could be directly compared. GO (without organic functionalization) with varying oxidation extent(s) was also included for comparison. The material matrix was evaluated for aqueous stability by comparing critical coagulation concentration (CCC) as a function of varied ionic strength and type (NaCl, CaCl2, MgCl2, and MgSO4) at pH 7.0. Without surface derivatization (i.e., pristine GO), increased stability was observed with an increase in the GO oxidation state, which is supported by plate-plate Derjaguin, Landau, Verwey and Overbeek (DLVO) energy interaction analyses. For derivatized GO, we observed that hydrophilic additions (phi-GO) are relatively more stable than hydrophobic organic coated GO (pho-GO). We further explored this by altering a single OH group in the adamantane-x structure (3-amino-1-adamantanol vs. 1-adamantylamine). As expected, Ca2+ and monovalent co-ions play an important role in the aggregation of highly oxidized GO (HGO) and phi-GO, while the effects of divalent cations and co-ions were less significant for pho-GO. Taken together, this work provides new insight into the intricate dynamics of GO-based material stability in water as it relates to surface functionalization (surface energies) and ionic conditions including type of co- and counter-ion, valence, and concentration.

Formation and Transport of Cr(III)-NOM-Fe Colloids upon Reaction of Cr(VI) with NOM-Fe(II) Colloids at Anoxic-Oxic Interfaces.

Natural organic matter-iron (NOM-Fe) colloids are ubiquitous at anoxic-oxic interfaces of subsurface environments. Fe(II) or NOM can chemically reduce Cr(VI) to Cr(III), and the formation of Cr(III)-NOM-Fe colloids can control the fate and transport of Cr. We explored the formation and transport of Cr(III)-humic acid (HA)-Fe colloids upon reaction of Cr(VI) with HA-Fe(II) colloids over a range of environmentally relevant conditions. Cr(VI) was completely reduced by HA-Fe(II) complexes under anoxic conditions, and the formation of Cr(III)-HA-Fe colloids depended on HA concentration (or molar C/Fe ratio) and redox conditions. No colloids formed at HA concentrations below 3.5 mg C/L (C/Fe ratio below 1.6), but Cr(III)-HA-Fe colloids formed at higher HA concentrations. In column experiments, Cr(III)-HA-Fe(III) colloids formed under oxic conditions were readily transported through sand-packed porous media. Colloidal stability measurements further suggest that Cr(III)-HA-Fe colloids are highly stable and persist for at least 20 days without substantial change in particle size. This stability is attributed to the enrichment of free HA adsorbed on the Cr(III)-HA-Fe colloid surfaces, intensifying the electrostatic and/or steric repulsion interactions between particles. The new insights provided here are important for evaluating the long-term fate and transport of Cr in organic-rich redox transition zones.

Cr(VI) Adsorption on Engineered Iron Oxide Nanoparticles: Exploring Complexation Processes and Water Chemistry.

Surface-functionalized magnetic nanoparticles are promising adsorbents due to their large surface areas and ease of separation after contaminant removal. In this work, the affinity of Cr(VI) adsorption to 8 nm surface-functionalized superparamagnetic magnetite nanoparticles was determined for surface coatings with amine (trimethyloctadecylammonium bromide, CTAB) and carboxyl (stearic acid, SA) functional groups. Cr(VI) adsorbed more strongly to the CTAB-coated nanoparticles than to the SA-coated materials due to electrostatic interactions between positively charged CTAB and anionic Cr(VI) species. The adsorption of Cr(VI) by CTAB- and SA-coated nanoparticles increased with decreasing pH (4.5-10), which could be simulated by a surface complexation model. Cr(VI) removal performance by the nanocomposite was evaluated for two realistic drinking water compositions. The co-occurrence of divalent cations (Ca2+ and Mg2+) and Cr(VI) resulted in decreased Cr(VI) adsorption as particles were destabilized, leading to the aggregation and lower effective surface area, confirming the importance of the overall water composition on the performance of novel engineered nanomaterials for water treatment applications.