Small Charged Molecule-Mediated Fibrillar Mineralization: Implications for Ectopic Calcification.

Numerous small biomolecules exist in the human body and play roles in various biological and pathological processes. Small molecules are believed not to induce intrafibrillar mineralization alone. They are required to work in synergy with noncollagenous proteins (NCPs) and their analogs, e.g. polyelectrolytes, for inducing intrafibrillar mineralization, as the polymer-induced liquid-like precursor (PILP) process has been well-documented. In this study, we demonstrate that small charged molecules alone, such as sodium tripolyphosphate, sodium citrate, and (3-aminopropyl) triethoxysilane, could directly mediate fibrillar mineralization. We propose that small charged molecules might be immobilized in collagen fibrils to form the polyelectrolyte-like collagen complex (PLCC) via hydrogen bonds. The PLCC could attract CaP precursors along with calcium and phosphate ions for inducing mineralization without any polyelectrolyte additives. The small charged molecule-mediated mineralization process was evidenced by Cryo-TEM, AFM, SEM, FTIR, ICP-OES, etc., as the PLCC exhibited both characteristic features of collagen fibrils and polyelectrolyte with increased charges, hydrophilicity, and density. This might hint at one mechanism of pathological biomineralization, especially for understanding the ectopic calcification process.

Treatment decisions of patients with Class II Division 2 malocclusion and severe tooth wear: a systematic review.

BACKGROUND: The treatment strategy for patients with severe tooth wear associated with Class II Division 2 malocclusion remains a major challenge for dental practitioners. OBJECTIVES: To systematically review and summarize the literature on treatment strategies, restoration procedures and clinical outcomes for Class II Division 2 malocclusion patients with severe tooth wear. METHODS: A literature review was conducted using Pubmed, Embase, the Cochrane Library, and Web of Science to identify eligible articles. Publications until October 16th, 2023 were searched independently and cross-checked by two researchers. RESULTS: Of 1513 articles screened, 10 reports detailed treatment processes, including six males and four females aged 34-68 years old. Four articles recorded pre-treatment freeway space (FWS) values ranging from 5 to 9 mm. All ten cases had significant occlusal vertical dimension (OVD) loss and the increase in OVD after treatment ranged from 1 to 7 mm. Pre-prosthetic orthodontic treatment was performed in two cases, in one of which only the maxillary region was orthodontically treated. The most common restorations provided were full coverage restorations. In most cases, temporary restorations were applied before the permanent restorations for eight weeks to six months. Four different sequences of final restoration were proposed. Follow-up ranged from four months to six years and included seven patients, one of them showed symptoms of temporomandibular disorder (TMD). CONCLUSIONS: A multidisciplinary team (MDT) approach to treatment is recommended. Consideration of pre-prosthetic orthodontic treatment is essential. Commonly used cephalometric measurements for anterior teeth include the interincisal angle and collum angle. The increases in OVD ranging from 1 to 7 mm can be effectively accommodated. Temporary restorations are recommended to accommodate the OVD, and the transition periods of 8 weeks to 6 months help the patients adapted well. Four different sequences for final rehabilitation have demonstrated positive clinical outcomes. Full crown restorations have emerged as the preferred choice for the ultimate restoration of these patients.

The influence of neutral MDP-Na salt on dentin bond performance and remineralization potential of etch-&-rinse adhesive.

OBJECTIVES: To investigate the effect of neutral 10-methacryloyloxydecyl dihydrogen phosphate salt (MDP-Na) on the dentin bond strength and remineralization potential of etch-&-rinse adhesive. METHODS: Two experimental etch-&-rinse adhesives were formulated by incorporating 0 wt% (E0) or 20 wt% (E20) neutral MDP-Na into a basic primer. A commercial adhesive, Adper Single Bond 2 (SB, 3 M ESPE), served as the control. Sixty prepared teeth were randomly allocated into three groups (n = 20) and bonded using either one of the experimental adhesives or SB. Following 24 h of water storage, the bonded specimens were sectioned into resin-dentin sticks, with four resin-dentin sticks obtained from each tooth for microtensile bond strength (MTBS) test. Half of the sticks from each group were immediately subjected to tensile loading using a microtensile tester at a crosshead speed of 1 mm/min, while the other half underwent tensile loading after 6-month incubation in artificial saliva (AS). The degree of conversion (DC) of both the control and experimental adhesives (n = 6 in each group) and the adsorption properties of MDP-Na on the dentin organic matrix (n = 5 in each group) were determined using Fourier-transform infrared spectrometry. Furthermore, the effectiveness of neutral MDP-Na in promoting the mineralization of two-dimensional collagen fibrils and the adhesive-dentin interface was explored using transmission electron microscopy and selected-area electron diffraction. Two- and one-way ANOVA was employed to assess the impact of adhesive type and water storage on dentin bond strength and the DC (α = 0.05). RESULTS: The addition of MDP-Na into the primer increased both the short- and long-term MTBS of the experimental adhesives (p = 0.00). No difference was noted in the DC between the control, E0 and E20 groups (p = 0.366). The MDP-Na remained absorbed on the demineralized dentin even after thorough rinsing. The intra- and extra-fibrillar mineralization of the two-dimensional collagen fibril and dentin bond hybrid layer was confirmed by transmission electron microscopy and selected-area electron diffraction when the primer was added with MDP-Na. CONCLUSIONS: The use of neutral MDP-Na results in high-quality hybrid layer that increase the dentin bond strength of etch-&-rinse adhesive and provides the adhesive with remineralizing capability. This approach may represent a suitable bonding strategy for improving the dentin bond strength and durability of etch-&-rinse adhesive.

Occlusal veneer restoration treatment outcomes of cracked tooth syndrome: A 22.4-month follow-up study.

OBJECTIVES: The aims of this clinical study were to investigate success rate, vital pulp survival rate, tooth survival rate and patient-reported masticatory ability by evaluating the pain symptoms and signs of the cracked teeth as well as Index of Eating Difficulty (IED) and Oral Health Impact Profile-14 (OHIP-14) questionnaire after cracked teeth were restored with occlusal veneers. MATERIALS AND METHODS: 27 cracked teeth of 24 patients with cold and/or biting pains without spontaneous/nocturnal pains were recruited in this study. The cracked teeth were restored with occlusal veneers fabricated by lithium disilicate ceramic. Cold test and biting test were used to evaluate pain signs. IED and OHIP-14 questionnaire were used to evaluate masticatory ability. FDI criteria was used to evaluate restorations. The paired Wilcoxon test was used to analyze significant differences of detection rate of pain signs, OHIP scores and IED grade before and after restorations. Kaplan-Meier survival curve was used to describe the success rate, vital pulp survival rate, and tooth survival rate. RESULTS: 27 cracked teeth were restored with occlusal veneers with average of 22.4-month follow-up. Two cracked teeth had pulpitis and pain signs of the other cracked teeth completely disappeared. OHIP total scores were significantly reduced after treatment. Scores of 'pain', 'occlusal discomfort', 'uncomfortable to eat', 'diet unsatisfactory' and 'interrupted meals' reduced significantly after treatment. After treatment, IED grades of 25 vital teeth were significantly lower than those before treatment. FDI scores of 25 restorations except for 2 teeth with pulpitis were no greater than 2. The 12 months accumulated pulp survival rate of the cracked teeth was 92.6%. The 12 months accumulated tooth survival rate was 100%. The success rate at the latest recall was 92.6%. CONCLUSION: Occlusal veneer restorations with success rate of 92.6% and the same pulp survival rate might be an effective restoration for treating the cracked teeth. CLINICAL RELEVANCE: The occlusal veneer restorations might be an option for treating the cracked teeth when cracks only involve enamel and dentin, not dental pulp.

STMP and PVPA as Templating Analogs of Noncollagenous Proteins Induce Intrafibrillar Mineralization of Type I Collagen via PCCP Process.

The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.

Citrate Improves Biomimetic Mineralization Induced by Polyelectrolyte-Cation Complexes Using PAsp-Ca&Mg Complexes.

Magnesium ions are highly enriched in early stage of biological mineralization of hard tissues. Paradoxically, hydroxyapatite (HAp) crystallization is inhibited significantly by high concentration of magnesium ions. The mechanism to regulate magnesium-doped biomimetic mineralization of collagen fibrils has never been fully elucidated. Herein, it is revealed that citrate can bioinspire the magnesium-stabilized mineral precursors to generate magnesium-doped biomimetic mineralization as follows: Citrate can enhance the electronegativity of collagen fibrils by its absorption to fibrils via hydrogen bonds. Afterward, electronegative collagen fibrils can attract highly concentrated electropositive polyaspartic acid-Ca&Mg (PAsp-Ca&Mg) complexes followed by phosphate solution via strong electrostatic attraction. Meanwhile, citrate adsorbed in/on fibrils can eliminate mineralization inhibitory effects of magnesium ions by breaking hydration layer surrounding magnesium ions and thus reduce dehydration energy barrier for rapid fulfillment of biomimetic mineralization. The remineralized demineralized dentin with magnesium-doped HAp possesses antibacterial ability, and the mineralization mediums possess excellent biocompatibility via cytotoxicity and oral mucosa irritation tests. This strategy shall shed light on cationic ions-doped biomimetic mineralization with antibacterial ability via modifying collagen fibrils and eliminating mineralization inhibitory effects of some cationic ions, as well as can excite attention to the neglected multiple regulations of small biomolecules, such as citrate, during biomineralization process.

Dentin surface modification by MDP to improve dentin bonding stability: Topological enhancement and mineralization of collagen structure in hybrid layers.

Decades of research have been conducted on 10-Methacryloyloxydecyl dihydrogen phosphate (MDP) through numerous studies. The mechanisms by which its residual calcium salts benefit dentin bonding remain undetermined. The objective of the research was to investigate the role and process of remaining calcium salts in the priming procedure and their capacity for remineralization. The investigation focused on the variations in topological structure, mechanical properties, and chemical interactions between the main agent and the dentin surface. Two adhesive modes including prime-and-rinse(P&R) and prime-and-nonrinse (P&NR) utilized to evaluate the bonding performance and remineralization ability. The findings indicated that both P&R and P&NR methods could eliminate the smear-layer, uncover dentinal-tubules, and generate a textured/rough surface on the dentin. Collagen fibrils exhibited a greater presence of inorganic minerals in the P&NR mode. Compared to control group, both P&R and P&NR groups improved immediate and aging bond strength significantly (P < 0.05). AFM and 3D-STORM revealed MDP and its residual calcium salts distributed in collagen fibrils and expanded collagen matrix. In the P&NR group, TEM revealed that the dentin collagen matrix experienced some remineralization, and there was also mineralization within the collagen fibrils embedded in the bonding interface. Thus, MDP priming improved dentin bonding stability. Residual calcium salts of P&NR process can enhance topological structure of the collagen matrix and induce intrafibrillar mineralization.

Intrafibrillar mineralization of type I collagen with calcium carbonate and strontium carbonate induced by polyelectrolyte-cation complexes.

Calcium carbonate (CaCO3), possessing excellent biocompatibility, bioactivity, osteoconductivity and superior biodegradability, may serve as an alternative to hydroxyapatite (HAp), the natural inorganic component of bone and dentin. Intrafibrillar mineralization of collagen with CaCO3 was achieved through the polymer-induced liquid precursor (PILP) process for at least 2 days. This study aims to propose a novel pathway for rapid intrafibrillar mineralization with CaCO3 by sequential application of the carbonate-bicarbonate buffer and polyaspartic acid (pAsp)-Ca suspension. Fourier transform infrared (FTIR) spectroscopy, zeta potential measurements, atomic force microscopy/Kelvin probe force microscopy (AFM/KPFM), and three-dimensional stochastic optical reconstruction microscopy (3D STORM) demonstrated that the carbonate-bicarbonate buffer significantly decreased the surface potential of collagen and CO32-/HCO3- ions could attach to collagen fibrils via hydrogen bonds. The electropositive pAsp-Ca complexes and free Ca2+ ions are attracted to and interact with CO32-/HCO3- ions through electrostatic attractions to form amorphous calcium carbonate that crystallizes gradually. Moreover, like CaCO3, strontium carbonate (SrCO3) can deposit inside the collagen fibrils through this pathway. The CaCO3-mineralized collagen gels exhibited better biocompatibility and cell proliferation ability than SrCO3. This study provides a feasible strategy for rapid collagen mineralization with CaCO3 and SrCO3, as well as elucidating the tissue engineering of CaCO3-based biomineralized materials.

A novel approach to full-mouth rehabilitation of dentinogenesis imperfecta type II: Case series with review of literature.

RATIONALE: Dentinogenesis imperfecta (DI) is an autosomal-dominant disorder. The most common clinical manifestations, including obliterated tooth tissues and severe tooth wear, usually lead to tooth extractions. It remains a great challenge for dentists to preserve the residual tooth tissue and establish the esthetics and occlusion of dentitions. PATIENTS CONCERNS: 25-year-old twin sisters, who had suffered from dentinogenesis imperfecta type II for more than 10 years, presented with continuous tooth wear and discomfort from wearing a removable partial denture for more than 3 years. DIAGNOSIS: Intraoral examination showed extensive tooth wear with enamel exfoliation and typical amber-brown color with an opalescent discoloration. Their panoramic radiographs revealed completely obliterated tooth tissues and severe tooth wear. INTERVENTIONS AND OUTCOMES: The dentitions were restored with post-and-core crowns and pin lays after preparing root post paths and pin holes guided by computer-aided design/computer-aided manufacturing (CAD/CAM) procedures, resulting in a successful repair. LESSONS: Severe tooth wear and tooth tissue obliteration are typical clinical manifestations in DI-affected dentitions, increasing the complexity and difficulty in dental restorations. Early diagnosis and appropriate treatments are essential to achieve a favorable prognosis. CAD/CAM procedures, permitting accurate and effective treatment, possess promising potential in the treatment of DI-affected dentitions.

Remineralizing effects of hydroxypropyl methylcellulose film-loaded amorphous calcium phosphate nanoprecursors on enamel artificial caries lesions.

OBJECTIVES: This study was to investigate hydroxypropyl methylcellulose (HPMC) film as a carrier for amorphous fluorinated calcium phosphate (AFCP) nanoprecursors to continuously deliver biomimetic remineralization of enamel artificial caries lesions (ACL). MATERIALS AND METHODS: The AFCP/HPMC films were comprised of 25 wt% AFCP nanoparticles and 75 wt% HPMC. They were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and biocompatibility tests. Forty enamel ACL were prepared and randomly divided into four groups (n = 10): The enamel surfaces were covered with a pure HPMC film, Tooth Mousse Plus (contains 10% CPP-ACP and 0.2% NaF), and AFCP/HPMC film, or without any things (serving as negative control). Subsequently, all samples were alternatively kept in artificial saliva and a modified pH-cycling before they were characterized by Micro-CT, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), attenuated total reflectance (ATR)-FTIR, XRD, and nanoindentation. RESULTS: After the enamel ACL was challenged by pH cycling, Tooth Mousse Plus and AFCP/HPMC film groups exhibited less lesion depth and mineral loss than the negative control and pure HPMC film groups. Additionally, the AFCP/HPMC film group revealed a highest remineralization rate of 55.34 ± 3.10 % among the all groups (p < 0.001). The SEM findings showed that the enamel ACL were densely deposited with minerals in the AFCP/HPMC film group, and the EDX results suggested a higher content of fluorine in the remineralized tissues. In particular, the AFCP/HPMC film group exhibited the best nanomechanical performance after 2 weeks of pH cycling (p < 0.05), with the hardness (H) restored from 0.29 ± 0.19 to 2.69 ± 0.70 GPa, and elastic modulus (Er) restored from 10.77 ± 5.30 to 68.83 ± 12.72 GPa. CONCLUSION: The AFCP/HPMC film might be used as a promising strategy for arresting or reversing incipient enamel caries lesions.

Remineralization of Dentin with Cerium Oxide and Its Potential Use for Root Canal Disinfection.

Objective: This study was to investigate a novel antibacterial biomimetic mineralization strategy for exploring its potential application for root canal disinfection when stabilized cerium oxide was used. Material and Methods: A biomimetic mineralization solution (BMS) consisting of cerium nitrate and dextran was prepared. Single-layer collagen fibrils, collagen membranes, demineralized dentin, and root canal system were treated with the BMS for mineralization. The mineralized samples underwent comprehensive characterization using various techniques, including transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and micro-CT. Additionally, the antimicrobial properties of the BMS and the remineralized dentin were also analyzed with broth microdilution method, live/dead staining, and SEM. Results: Cerium ions in the BMS underwent a transformation into cerium oxide nanoparticles, which were deposited in the inter- and intra-fibrillar collagen spaces through a meticulous bottom-up process. XPS analysis disclosed the presence of both Ce (III) and Ce (IV) of the generated cerium oxides. A comprehensive examination utilizing SEM and micro-CT identified the presence of cerium oxide nanoparticles deposited within the dentinal tubules and lateral canals of the root canal system. The BMS and remineralized dentin exhibited substantial antibacterial efficacy against E. faecalis, as substantiated by assessments involving the broth dilution method and live/dead staining technique. The SEM findings revealed the cell morphological changes of deceased E. faecalis. Conclusion: This study successfully demonstrated antibacterial biomimetic mineralization as well as sealing dentinal tubules and lateral branches of root canals using cerium nitrate and dextran. This novel biomimetic mineralization could be used as an alternative strategy for root canal disinfection.

Reversion of ACP Nanoparticles into Prenucleation Clusters via Surfactant for Promoting Biomimetic Mineralization: A Physicochemical Understanding of Biosurfactant Role in Biomineralization Process.

Amphiphilic biomolecules are abundant in mineralization front of biological hard tissues, which play a vital role in osteogenesis and dental hard tissue formation. Amphiphilic biomolecules function as biosurfactants, however, their biosurfactant role in biomineralization process has never been investigated. This study, for the first time, demonstrates that aggregated amorphous calcium phosphate (ACP) nanoparticles can be reversed into dispersed ultrasmall prenucleation clusters (PNCs) via breakdown and dispersion of the ACP nanoparticles by a surfactant. The reduced surface energy of ACP@TPGS and the electrostatic interaction between calcium ions and the pair electrons on oxygen atoms of C-O-C of D-α-tocopheryl polyethylene glycol succinate (TPGS) provide driving force for breakdown and dispersion of ACP nanoparticles into ultrasmall PNCs which promote in vitro and in vivo biomimetic mineralization. The ACP@TPGS possesses excellent biocompatibility without any irritations to oral mucosa and dental pulp. This study not only introduces surfactant into biomimetic mineralization field, but also excites attention to the neglected biosurfactant role during biomineralization process.

The treatment outcomes of cracked teeth: A systematic review and meta-analysis.

OBJECTIVES: The aim of this review was to analyze the clinical treatment outcomes of cracked teeth (CT) retaining vital dental pulp (CT-VDP) or undergoing root canal treatment (CT-RCT). SOURCES: A systematic search was conducted in Medline, Embase, PubMed, and Cochrane Library databases. STUDY SELECTION: Studies evaluating tooth survival rate (TSR), pulp survival rate (PSR), and success rate (SR) with at least a one-year follow-up were included. The risk of bias was evaluated with the Newcastle-Ottawa scale. DATA: Twenty-seven studies underwent qualitative analysis, 26 of which were included in the meta-analysis. SR of monitoring without restorative treatments was 80 % at three years. TSR of CT-VDP was 92.8-97.8 % at 1‒6 years, PSR of CT-VDP was 85.6‒90.4 % at 1‒3 years, and SR of CT-VDP was 80.6‒89.9 % at 1‒3 years; TSR of CT-RCT was 90.5‒91.1 % at 1‒2 years, and SR of CT-RCT was 83.0‒91.2 % at 1‒4 years. Direct restorations without cuspal coverage for CT-VDP increased the risk ratio (RR) of pulpal complications (RR=3.2, 95 % CI: 1.51-6.82, p = 0.002) and tooth extraction (RR=8.1, 95 % CI: 1.05-62.5, p = 0.045) compared with full-crown restorations. The CT-RCT without full-crown restorations had an 11.3-fold higher risk of tooth extraction than the CT-RCT with full-crown restorations (p < 0.001). CONCLUSIONS: Monitoring without restorative treatments might be an option for the CT without any symptoms. Direct restorations without cuspal coverage for the CT-VDP could significantly increase the RR of pulpal complications and tooth extraction compared with full-crown restorations. Full-crown restorations are strongly recommended for the CT-RCT. CLINICAL SIGNIFICANCE: Monitoring without restorative treatments could be a viable option for the CT without any symptoms. Full-crown restorations are strongly recommended for the CT with any symptoms and the CT-RCT.

In-depth occlusion of dentine tubules via the application of (poly-L-aspartic acid)­strontium and phosphate/fluoride to treat dentine hypersensitivity.

Dentine hypersensitivity (DH) is a common oral health issue and occlusion of the exposed dentinal tubules (DTs) is regarded as the most effective therapeutic treatment nowadays. However, it is still difficult to develop easy and effective strategies for deep occlusion of DTs. In this study, we develop a strategy for occluding DTs deeply and compactly via simple application of occlusion media including (poly-L-aspartic acid)­strontium (PAsp­strontium) and phosphate/fluoride. The bonding of strontium ions to poly-L-aspartic acid formed a positively charged PAsp­strontium complexes. After application of 15 min each, the PAsp­strontium and phosphate/fluoride rapidly penetrated into the DTs in turn via the electrostatic interaction, then occluded the DTs with crystals up to a depth of 150 µm. The occlusion within DTs was resistant to abrasive and acidic challenges. The occlusion media performed better than commercial desensitizers Duraphat and Gluma. Moreover, this strategy possessed sufficient biocompatible and excellent performance in vivo. The application of occlusion media would shed light on in the management of DH.

A glycol chitosan derivative with extrafibrillar demineralization potential for self-etch dentin bonding.

OBJECTIVES: Extrafibrillar demineralization is an etching technique that removes only minerals from around the collagen fibrils for resin infiltration. The intrafibrillar minerals are left intact to avoid their replacement by water that is hard for adhesive resin monomers to displace. The present work reported the synthesis of a water-soluble methacryloyloxy glycol chitosan-EDTA conjugate (GCE-MA) and evaluated its potential as an extrafibrillar demineralization agent for self-etch dentin bonding. METHODS: Glycol chitosan-EDTA was functionalized with a methacryloyloxy functionality. Conjugation was confirmed using Fourier transform-infrared spectroscopy. The GCE-MA was used to prepare experimental self-etch primers. Extrafibrillar demineralization of the primers was evaluated with scaning electron microscopy and transmission electron microscopy. The feasibility of this new self-etch bonding approach was evaluated using microtensile bond strength testing and inhibition of dentin gelatinolytic activity. The antibacterial activity and cytotoxicity of GCE-MA were also analyzed. RESULTS: Conjugation of EDTA and the methacryloyloxy functionality to glycol chitosan was successful. The functionalized conjugate was capable of extrafibrillar demineralization of mineralized collagen fibrils. Tensile bond strength of the experimental self-etch primer to dentin was comparable to that of phosphoric acid-etched dentin and the commercial self-etch primer Clearfil SE Bond 2. The GCE-MA also inhibited soluble rhMMP-9. In-situ zymography detected minimal fluorescence in hybrid layers conditioned with the experimental primer. The GCE-MA was noncytotoxic and possessed antibacterial activities against planktonic bacteria. SIGNIFICANCE: Synthesis of GCE-MA brought into fruition a self-etch conditioner that selectively demineralizes the extrafibrillar mineral component of dentin. A self-etch primer prepared with GCE-MA achieved bond strengths comparable to commercial reference adhesive systems.

Polyelectrolyte-Cation Complexes Using PAsp-Sr Complexes Induce Biomimetic Mineralization with Antibacterial Ability.

Remineralized dentin with an antibacterial ability is still a significant challenge in dentistry. Previously, a polyelectrolyte-calcium complexes pre-precursor (PCCP) process is proposed for rapid collagen mineralization. In the present study, the expansion concept of the PCCP process is explored by replacing the calcium with other cations, such as strontium. The results of transmission electron microscopy (TEM), 3D stochastic optical reconstruction microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and high-resolution TEM with selected area electron diffraction demonstrate that biomimetic mineralization of collagen fibrils and demineralized dentin could be fulfilled with Sr&F-codoped hydroxyapatite (HAp) after they are treated with poly-aspartic acid-strontium (PAsp-Sr) suspension followed by a phosphate&fluoride solution. Moreover, dentin remineralized with Sr&F-codoped HAp exhibits in vitro and in vivo antibacterial ability against Streptococcus mutans. The cytotoxicity and oral mucosa irritation tests reveal excellent biocompatibility of mineralization mediums (PAsp-Sr suspension and phosphate&fluoride solution). The demineralized dentin's mechanical properties (elastic modulus and microhardness) could be restored almost to that of the intact dentin. Hence, the expansion concept of the PCCP process that replaces calcium ions with some cationic ions along with fluorine opens up new horizons for generating antibacterial remineralized dentin containing ions-doped HAp with excellent biocompatibility via biomimetic mineralization technology.

Effect of the prism-interprisms three-dimension spatial microstructure on the enamel bond strength.

The prism-interprisms level of the enamel hierarchical microstructure is the largest degree of structural variation and most sophisticated structural adaptation. We studied the effect of the prism-interprisms three-dimension spatial microstructure on the enamel bond strength. We prepared 11 groups of enamel segments: longitudinally sectioned segments with or without a 45-degree bevel (group = 2), horizontally sectioned segments with or without a 45-degree bevel of three regions (the incisal, middle, and cervical) (group = 6), and tangential (labial) sectioned segments of three regions (the incisal, middle, and cervical) (group = 3). The finished surface of each segment was observed by scanning electric microscopy (SEM) before treatment with four self-etch adhesive systems and applied with four corresponding composite resins. Resin-bonded enamel samples were prepared in beams for microtensile bond strength (MTBS) tests. The results were analyzed with a three-way ANOVA followed by Tukey's post-hoc HSD multiple comparisons procedure. SEM observations revealed complex arrangements of prisms and interprisms. MTBS measurement showed that the longitudinally sectioned group had the lowest value, without significant differences between the groups with or without 45-degree bevel. Combining SEM observations and MTBS measurements, the prism-interprisms microstructure varied with the incisor regions, and different prism-interprisms microstructures allowed diverse sectioned surfaces, which could affect the enamel bonding.

In Situ Growth of Functional Hydrogel Coatings by a Reactive Polyurethane for Biomedical Devices.

Surface modification of thermoplastic polyurethane (TPU) could significantly enhance its suitability for biomedical devices and public health products. Nevertheless, customized modification of polyurethane surfaces with robust interfacial bonding and diverse functions via a simple method remains an enormous challenge. Herein, a novel thermoplastic polyurethane with a photoinitiated benzophenone unit (BPTPU) is designed and synthesized, which can directly grow functional hydrogel coating on polyurethane (PU) in situ by initiating polymerization of diverse monomers under ultraviolet irradiation, without the involvement of organic solvent. The resulting coating not only exhibits tissue-like softness, controllable thickness, lubrication, and robust adhesion strength but also provides customized functions (i.e., antifouling, stimuli-responsive, antibacterial, and fluorescence emission) to the original passive polymer substrates. Importantly, BPTPU can be blended with commercial TPU to produce the BPTPU-based tube by an extruder. Only a trace amount of BPTPU can endow the tube with good photoinitiated capacity. As a proof of concept, the hydrophilic hydrogel-coated BPTPU is shown to mitigate foreign body response in vivo and prevent thrombus formation in rat blood circulation without anticoagulants in vitro. This work offers a new strategy to guide the design of functional polyurethane, an elastomer-hydrogel composite, and holds great prospects for clinical translation.

ASSOCIATION OF ORAL MICROBIOTA AND PERIODONTAL DISEASE WITH LUNG CANCER: A SYSTEMATIC REVIEW AND META-ANALYSIS.

OBJECTIVES: Evidence of oral microbiota perturbations has been accumulated for lung cancers. This review focused on the oral microbiota alterations in population suffering from lung cancer. In addition, we also discussed conflicting data about the association between oral microbiota dysbiosis and risk of lung cancer. METHODS: A systematic search was conducted in Medline, Embase, PubMed, and Cochrane Library databases. The studies evaluated diversity and abundance of oral microbes in healthy and lung cancer individuals as well as association of periodontal disease and pathogens with lung cancer. Of 3559 studies, 28 included studies were performed in qualitative analysis, and 25 studies were used in meta-analyses for quantitative assessment. Heterogeneity was analyzed by using I² and chi-squared Q test statistics. Statistical analyses were performed by using the RevMan 5.4 software. RESULTS: Compared with the control, lung cancer patients had lower alpha diversity (Shannon: SMD = -0.54; 95% CI, -0.90 to -0.19; P < .01, I2 = 71%). In nested case-control studies, individuals with decreased alpha diversity tended to have an increased risk of lung cancer (observed species: HR = 0.90; 95% CI, 0.85-0.96; P < .01, I2 = 0%; Shannon: HR = 0.89; 95% CI, 0.83-0.95; P < .01, I2 = 0%). Overall, no strong evidence of association of relative abundance with specific oral microbes with lung cancers was found because of inconsistent data. No associations were found between periodontal pathogens and lung cancer risk (red complex: HR = 1.12, 95% CI: 0.42-3.02, P = .82, I2 = 62%; orange complex: HR =1.77, 95% CI: 0.78-3.98, P = .17, I2 = 36%), expect for Fusobacterium nucleatum (HR = 2.27, 95% CI: 1.13-4.58, P = .02, I2 = 0%). The positive association of periodontal disease with lung cancer risk was found (HR = 1.58, 95% CI: 1.25-2.00, P < .001, I2= 0%) with increase of periodontal diseases severity (HR = 2.39, 95% CI: 1.57-3.66, P < .001, I2 = 0%). However, such association was not found in never-smoker participants (HR = 1.00, 95% CI: 0.76-1.31, P = .37, I2= 7%). CONCLUSIONS: Lower alpha diversity of oral microbiome may be associated with a greater risk of lung cancer and might serve as a predictive signal of lung cancer risk. There was no strong evidence of relative abundance of oral microbial taxa and periodontal pathogens in lung cancer patients. Fusobacterium nucleatum might be a potential microbial candidate of biomarkers in lung cancer. Periodontal disease may be positively associated with lung cancer risk by confounding of smoking, but not an independent risk factor.

In-Depth Occlusion of Dentinal Tubules and Rapid Remineralization of Demineralized Dentin Induced by Polyelectrolyte-Calcium Complexes.

Dentin hypersensitivity (DH) is triggered by external stimuli irking fluid flow through exposed dentinal tubules (DTs). Three commercially available desensitizing agents as control in this study only achieve limited occlusion depths of ≈10 µm in the DTs as well as scarce remineralization of demineralized dentin matrix. Herein, polyelectrolyte-calcium complexes pre-precursor (PCCP) process is proposed for managing DH that demineralized dentin with exposed DTs is rubbed with ultrahighly concentrated polyelectrolyte-calcium suspension (4 g L-1 -5.44 m) followed by phosphate solution (3.25 m), each 10 min, leading to heavy remineralization of demineralized dentin and compact occlusion of the DTs over 200 µm after 1 day of in vitro and in vivo incubation. For the first time, it is demonstrated that the PCCP process relies on the pH-dependent electrostatic attraction between electropositive polyelectrolyte-calcium complexes and electronegative inwalls of DTs comprised of collagen fibrils and hydroxyapatite crystals under alkaline condition. The PCCP process might shed light on a promising dentin desensitizing strategy for DH management via rapid in-depth DT occlusion and remineralization of demineralized dentin.