Janus Structure Construction of Polyester-Cotton Fabrics for Achieving Excellent Moisture, Moisture-Permeability, and Antibacterial Capability.

Integration of hydrophobic and antibacterial functionalities into polyester-cotton blended (PTCO) textiles has attracted more attention but remains a challenge. Here, a Janus fabric with antibacterial effect, hydrophobicity, and enhanced moisture-permeability is fabricated using a "mist polymerization" approach. The PET fibers in the PTCO fabric are amino-functionalized through ammonolysis reactions of PET molecules with HDA, and mist treatments of poly lauryl methacrylate (PLMA) and poly(DMC-co-MA) (PDM) are applied on the two side surfaces of the PTCO-HDA fabric, respectively. The resulting Janus fabric exhibits an antibacterial rate of 99.9% against both E. coli and S. aureus, along with a hydrophobic property on its single side (PTCO-HDA@PLMA). Additionally, the establishment of a surface-free energy gradient across the fabric confers superior moisture-permeability to the Janus fabric, offering advantages in preserving textile comfort. Moreover, this approach does not significantly compromise the original fabric properties, such as mechanical strength, moisture permeability, and fabric softness. The proposed method offers a straightforward and scalable strategy for textile finishing, demonstrating great potential in expanding the application scope of PTCO fabrics, and it may hold a pivotal role in diverse applications, notably encompassing home textiles, wound dressings, and high-performance sportswear.

Utilization of deep eutectic solvent as a degumming protocol for raw silk: Towards performance and mechanism elucidation.

Degumming is the most critical step for the silk textile industry and the process of silk-based advanced materials. However, current common degumming techniques are largely limited because of insufficient efficiency, obvious hydrolysis damage and difficulty in long-term storage. Here, deep eutectic solvent (DES) constituted of choline chloride (ChCl) and urea was explored to Bombyx mori silk fibers degumming without combining any further treatment. Compared to traditional alkali methods, DES could quickly remove about 26.5 % of sericin in just 40 min, and its degumming efficiency hardly decrease after seven cycles. Owing to the "tear off" degumming mechanism of DES molecules with "large volume", the resulted sericin has a large molecular weight of 250 kDa. In addition, because of antibacterial activity and stabilizing effect, no aggregation occurred and strong bacterial growth inhibition was triggered in the obtained sericin/DES solution. Furthermore, thanks to the good retention of crystalline region and slight swelling of amorphous area, the sericin-free fibroin showed significant increases in moisture absorption and dye uptake, while maintaining good mechanical properties. Featured with high efficiency, reduction in water pollution, easy storage of sericin as well as high quality fibers, this approach is of great potential for silk wet processing.

Construction of Janus structures on thin silk fabrics via misting for wet-thermal comfort and antimicrobial activity.

Owing to their small fiber diameter (10-15 µm), silk fabrics are always thin (32-90 g m-2). Therefore, construction of the Janus surfaces of silk fabrics that possess excellent multifunctionality remains a formidable challenge. Herein, first, silk fabrics were grafted using glycidyltrimethylammonium chloride to form a superhydrophilic surface (G-side). Then, a unilateral hydrophobic surface (O-side) was readily fabricated by mist coating octadecyltrichlorosilane-functionalized SiO2 nanoparticles (NPs) to produce hierarchical surface textures. To prevent NP penetration from the G-side to the O-side, a "fireproof isolation" method was employed. Consequently, Janus silk fabrics (JanSFs) bearing asymmetric wettability were prepared, and their wetting gradient could be conveniently regulated. With the mist time ranging from 4 to 7 min, the unidirectional transport index and efficiency of the unidirectional water transport increased and decreased by 13.2 and 10.4 times, respectively. Sweat could be effectively drained away from human skin to ensure that the skin was dry and comfortable. Compared with the surface temperature of the raw fabric, the raw fabric of JanSFs increased by 2.7 °C. Furthermore, the breathability of JanSF was negligibly affected, and the outer O-side of the JanSF showed substantial antibacterial activity. This study is important for designing JanSFs that exhibit unidirectional water transport.

A facile and scalable strategy for constructing Janus cotton fabric with persistent antibacterial activity.

Natural cotton fibers have attached considerable attention due to their excellent wearing comfort, breathability and warmth. However, it remains a challenge to devise a scalable and facile strategy to retrofit natural cotton fibers. Here, the cotton fiber surface was oxidized by sodium periodate with a mist process, then [2-(methacryloyloxy) ethyl] trimethylammonium chloride (DMC) was co-polymerized with hydroxyethyl acrylate (HA) to obtain an antibacterial cationic polymer (DMC-co-HA). The self-synthesized polymer was covalently grafted onto the aldehyde-functionalized cotton fibers via an acetal reaction between hydroxyl groups of the polymer and aldehyde groups of the oxidized cotton surface. Finally, the resulted Janus functionalized cotton fabric (JanCF) revealed robust and persistent antimicrobial activity. The antibacterial test showed that when the molar ratio of DMC/HA was 50: 1, JanCF possessed the best BR (bacterial reduction) values of 100 % against Escherichia coli and Staphylococcus aureus. Furthermore, the BR values could be maintained over 95 % even after the durability test. In addition, JanCF exhibited excellent antifungal activity against Candida albicans. The cytotoxicity assessment confirmed that JanCF exhibited a reliable safety effect on human skin. Particularly, the intrinsic outstanding characteristics (strength, flexibility, etc.) of the cotton fabric were not considerably deteriorated compared to the control samples.

Functional Textile Materials for Blocking COVID-19 Transmission.

The outbreak of COVID-19 provided a warning sign for society worldwide: that is, we urgently need to explore effective strategies for combating unpredictable viral pandemics. Protective textiles such as surgery masks have played an important role in the mitigation of the COVID-19 pandemic, while revealing serious challenges in terms of supply, cross-infection risk, and environmental pollution. In this context, textiles with an antivirus functionality have attracted increasing attention, and many innovative proposals with exciting commercial possibilities have been reported over the past three years. In this review, we illustrate the progress of textile filtration for pandemics and summarize the recent development of antiviral textiles for personal protective purposes by cataloging them into three classes: metal-based, carbon-based, and polymer-based materials. We focused on the preparation routes of emerging antiviral textiles, providing a forward-looking perspective on their opportunities and challenges, to evaluate their efficacy, scale up their manufacturing processes, and expand their high-volume applications. Based on this review, we conclude that ideal antiviral textiles are characterized by a high filtration efficiency, reliable antiviral effect, long storage life, and recyclability. The expected manufacturing processes should be economically feasible, scalable, and quickly responsive.

Enhancing the solubility and antimicrobial activity of cellulose through esterification modification using amino acid hydrochlorides.

Most amino acid molecules have good water solubility and are rich in functional groups, which makes them a promising derivatizing agent for cellulose. However, self-condensation of amino acids and low reaction efficiency always happen during esterification. Here, amino acid hydrochloride ([AA]Cl) is selected as raw material to synthesize cellulose amino acid ester (CAE). Based on TG-MS coupling technology, a significantly faster reaction rate of [AA]Cl compared to raw amino acid can be observed visually. CAE with the degree of substitution 0.412-0.516 is facilely synthesized under 130-170 °C for 10-50 min. Moreover, the effects of amounts of [AA]Cl agent, temperature, and time on the esterification are studied. The CAE can be well dissolved in 7 wt% NaOH aq., resulting in a 7.5 wt% dope. The rheological test of the dope demonstrated a shear-thinning behavior for Newtonian-like fluid, and a high gel temperature (41.7 °C). Further, the synthesized products show distinct antibacterial activity and the bacteriostatic reduction rate against E. coli can reach 99.5 %.

Facile Strategy for Constructing Highly Thermally Conductive Epoxy Composites Based on a Salt Template-Assisted 3D Carbonization Nanohybrid Network.

The construction of an interconnected nanofiller network is critical for the preparation of highly effective thermal management composites, though it remains a challenge to eliminate the anisotropic thermal conductivity of the nanofiller-induced defective interfacial heat-flow efficiency. In this work, a facile and novel approach is proposed to optimize phonon transport by building a salt template-assisted three-dimensional (3D) carbonization nanohybrid network in an epoxy system. The advantage of the salt template relied on green and scalable merits to construct a 3D nanofiller network and supporting abundant holes for the introduction of a polymer matrix after washing. Meanwhile, the contained carbonization materials contributed to reducing the interfacial phonon scattering issues of the filler/filler and filler/polymer for an efficient heat-flow pathway. As a result of this effect, the prepared epoxy nano-composites presented a high thermal conductivity of 4.27 W/m K, resulting in a 1841% increase compared to the thermal conductivity of the pure epoxy resin. In addition, the epoxy composites exhibited good mechanical properties and thermal conductive performance during heating and cooling. Therefore, this study may provide new insights into the design and preparation of thermal management polymers to meet the applicational requirements of electronics.

Synthesis of bimetallic silver-gold nanoparticle composites using a cellulose dope: Tunable nanostructure and its biological activity.

Introducing functional metal nanoparticles (NPs) into flexible substrate is being increasingly attempted to expand their application. Here, we extend the synthesis of cellulose to its unmodified dope achieving freestanding nanocomposite decorated with bimetallic Ag-Au NPs through the one pot reaction. In the procedure, cellulose chain not only acts as a reducing agent but also a biocompatible support for NPs with a mean size of 7.9-9.7 nm. Meanwhile, changing the addition order of Ag+ and AuCl4- generated different atom arrangement in the bimetallic NPs. Moreover, the correlation of bioactivity to NP atom arrangement was studied. The result revealed that the nanocomposite containing NPs with an ultrathin Ag-rich outermost shell around an Au-rich core showed better bactericidal ability while lower cytotoxicity. In addition, the nanocomposite exhibited a sensitive SERS property for determination of R6G with a high enhancement factor of 108.

Unexpected Healability of an ortho-Blocked Polybenzoxazine Resin.

Ring-opening polymerization of bifunctional benzoxazine has long been thought to produce a permanent network structure without reprocessing ability. Here, we demonstrate that surprising healability can be achieved by a controlled polymerization of an ortho-blocked bifunctional benzoxazine poly(oC-hda). The cured resin possesses a cross-linked structure, but can be deformed, remolded from crushed pieces or healed from mechanical damage. Based on a series of intensive experiments, we show that the healability can be explained by a dynamic bonding exchange mechanism between the phenoxy structures existing during the curing process. Moreover, we verify the possibility to heal the fatigue damaged poly(oC-hda) based composite to extend its service life. Our study provides another dynamic covalent bond to synthesize healable polymers, offering a broad platform for combining healability and desired thermosetting features together.

One-pot fabrication of durable antibacterial cotton fabric coated with silver nanoparticles via carboxymethyl chitosan as a binder and stabilizer.

In this article, durable antimicrobial cotton fabric was prepared by a one-pot modification process using a colloidal solution of silver nanoparticles (Ag NPs) stabilized by carboxymethyl chitosan (CMC). Due to coordination bonds between the amine groups of CMC and the Ag NPs and the ester bonds present between the carboxyl groups of CMC and the hydroxyl groups of cellulose, the Ag NPs were tightly immobilized onto the cotton fiber surface. As a result, the Ag NPs that were adhered on the cotton fabrics have uniform dispersion and small size, ranging from 10 nm to 80 nm. This provides the cotton fabric with remarkable and durable antibacterial activity against both S. aureus and E. coli. After 50 laundering cycles, the bacterial reduction rate (BR) for the modified cotton fabric remained over 94%. This method is simple, and it is particularly suitable for the industrial finishing process.

Thermally assisted self-healing behavior of anhydride modified polybenzoxazines based on transesterification.

A self-healing polybenzoxazine is synthesized solely based on dynamic ester bonds. For this purpose, an anhydride (succinic anhydride) was added into bisphenol F derived benzoxazine monomer before thermocuring. Owing to the transesterification of newly formed ester bonds, the thermoset network behaves as a thermoplastic at 140 °C in the presence of Zn (Ac)2, and shows self-healing properties even after multiple damage-healing cycles. Furthermore, kinetics study indicates that the transesterification is a first-order reaction and the activation energy is about 135.4 kJ/mol. This study proposes a facile and economical way to prepare self-healing polybenzoxazine. It has promising applications in coating, adhesive, and other smart materials that rely on structurally dynamic polymers.

Three-dimensional cellulose based silver-functionalized ZnO nanocomposite with controlled geometry: Synthesis, characterization and properties.

Cellulose based Ag-functionalized ZnO nanocomposite (AZC) films were prepared using a green and easy scale-up strategy. Firstly, ZnO embedded cellulose (ZC) nanocomposite was synthesized from a cellulose-NaOH/zincate/urea solution through a biomimetic approach. Secondly, Ag nanoparticles (NPs) with a mean diameter of 53.2 nm were efficiently deposited onto the surface of embedded ZnO in cellulose matrix under UV irradiation (16 w), yielding the multi-hybrid AZC film. Owing to the porous structure of cellulose substrate and its rich hydroxyl group, the NPs in the ACZ films displayed good stability. Because of the formation of Schottky barriers in the Ag-ZnO regions, the catalytic activity of ACZ films increased by 20 times when compared to that of ZC sample. Furthermore, the AZC films could completely inhibit both S. aureus and E. coli growth. This facile and eco-friendly approach is expected to pave the way for constructing multifunctional cellulose material for various niche applications.

Surface modification by carboxymethy chitosan via pad-dry-cure method for binding Ag NPs onto cotton fabric.

To obtain durably antimicrobial cotton fabric, carboxymethyl chitosan (CMC) was covalently linked to cotton fibers via an esterification with the cellulose hydroxyl groups, and the silver nanoparticles (Ag NPs) were adhered to the fiber surface by the coordination bonds with the amino groups of CMC. The finished cotton fabrics have an excellent antibacterial function and outstanding laundering durability. Even after 50 consecutive laundering tests, the modified cotton fabrics still show satisfactory bacterial reduction rates (BR) against both S. aureus and E. coli, which are all higher than 94%. These findings allow for broader applications of antimicrobial cotton textiles with a decreased safety risk and lower environmental impact arise from the Ag NPs.

Excellent binding effect of l-methionine for immobilizing silver nanoparticles onto cotton fabrics to improve the antibacterial durability against washing.

Silver nanoparticles (Ag NPs) have outstanding antimicrobial effects, but their weak adhesive force onto cotton fiber surfaces often causes undesired silver loss from antibacterial fabrics, diminishing antibacterial durability, and even leading to environmental and health risks. To improve adhesion of the Ag NPs, various strategies have been tried, but achieving long-term antibacterial effectiveness still remains challenging. Here, l-methionine is proposed as a binder reagent because it has low toxicity towards mammalian cells and has a methyl group to enhance its coordination ability. The antibacterial cotton fabric was fabricated via a very simple pad-dry-cure process: after dipping a cotton fabric in an l-methionine solution followed with heating for esterification, Ag NPs are formed via the reaction of silver nitrate with sodium borohydride. The resulting cotton fabric exhibits an excellent antibacterial property and laundering durability. Its bacterial reduction rates (BR) against both S. aureus and E. coli remained over 97% even after 90 consecutive laundering cycles. Moreover, the modification causes insignificant damage to cotton's characteristics, such as tensile breaking strength, water absorptivity, and vapor permeability.

Antibacterial cotton fabric with enhanced durability prepared using silver nanoparticles and carboxymethyl chitosan.

Carboxymethyl chitosan (CMCTS) and silver nanoparticles (Ag NPs) were successfully linked onto a cotton fabric surface through a simple mist modification process. The CMCTS binder was covalently linked to the cotton fabric via esterification and the Ag NPs were tightly adhered to the fiber surface by coordination bonds with the amine groups of CMCTS. As a result, the coating of Ag NPs on the cotton fabric showed excellent antibacterial properties and laundering durability. After 50 consecutive laundering cycles, the bacterial reduction rates (BR) against both S. aureus and E. coli remained over 95%. It has potential applications in a wide variety of fields such as sportswear, socks, and medical textile.

Fabrication of Hollow Materials by Fast Pyrolysis of Cellulose Composite Fibers with Heterogeneous Structures.

A facile method for the fabrication of inorganic hollow materials from cuprammonium cellulose composite filaments based on fast pyrolysis has been developed. Unlike Ostwald ripening, approaches based on the Kirkendall effect, and other template methods, this process yielded hollow materials within 100 s. The heterogeneous structure of the cellulose composite fibers and the gradient distribution of the metal oxides are the main reasons for the formation of the hollow structure. The diameter, wall thickness, and length of the hollow microfibers could be conveniently controlled. With their perfect morphology, these hollow structural materials have great potential for use in various fields.

Construction of cellulose based ZnO nanocomposite films with antibacterial properties through one-step coagulation.

Cellulose based ZnO nanocomposite (RCZ) films were prepared from cellulose carbamate-NaOH/ZnO solutions through one-step coagulation in Na2SO4 aqueous solutions. The structure and properties of RCZ films were characterized using XRD, FTIR, XPS, SEM, TEM, TG, tensile testing, and antibacterial activity tests. The content of ZnO in RCZ films was obtained in the range of 2.7-15.1 wt %. ZnO nanoparticles with a hexagonal wurtzite structure agglomerated into large particles, which firmly embedded in the cellulose matrix. RCZ films displayed good mechanical properties and high thermal stability. Moreover, the films exhibited excellent UV-blocking properties and antibacterial activities against Staphylococcus aureus and Escherichia coli. A dramatic reduction in viable bacteria was observed within 3 h of exposure, while all of the bacteria were killed within 6 h. This work provided a novel and simple pathway for the preparation of regenerated cellulose films with ZnO nanoparticles for application as functional biomaterials.

Polarization-insensitive subwavelength grating reflector based on a semiconductor-insulator-metal structure.

We present a polarization-insensitive subwavelength grating reflector based on a semiconductor-insulator-metal structure. The polarization-insensitive characteristic originates from the combined effect of the TM-polarized high-reflectivity high-index-contrast subwavelength grating and the TE-polarized metallic (Au) subwavelength grating with the addition of the insulator layer. The overlapped high reflectivity (>99.5%) bandwidth between the transverse electric polarization and the transverse magnetic polarization is 89 nm. This polarization-insensitive subwavelength grating reflector can be used in the applications without a preferred polarization.

Lateral cavity photonic crystal surface-emitting laser with ultralow threshold.

A lateral cavity photonic crystal (PhC) surface-emitting laser is realized on a commercial epitaxial waveguide wafer without a distributed Bragg reflector first. Energy is coupled from the lateral resonance to surface-emitting light through the Γ band edge of the PhC with a square lattice. Electrically driven 1553.8 nm surface-emitting lasing action is observed at room temperature. The threshold current density of 667 A/cm2 is ultralow for the surface-emitting laser.

Optical properties of the crescent and coherent applications.

By out-of-particle surface plasmon (SP) excitation in the near infrared range, the influences of key parameters on the basic optical properties of the Au crescent are qualitatively studied from the mode dispersion. Based on the coherent control of SP wave, a crescent pair sensor with the intensified extracted signal and the controllability of sensing is proposed. In addition, the crescent half replaced by Ag functioning as a position detector is also proposed. The particular phase of the detecting light as a detection parameter is used to improve the accuracy of the position detection.