Evaluation of the generation of reactive oxygen species and antibacterial activity of honey as a function of its phenolic and mineral composition.

The antibacterial activity (ABA) of honey is associated with the generation of reactive oxygen species (ROS), where polyphenols (PFs) play a key role due to their pro-oxidant action modulated by metallic cations. In this work, the contents of PFs, H2O2, OH radicals, Cu, Fe, Mn, Zn, and ABA against Staphylococcus epidermidis and Pseudomonas aeruginosa were determined in honeys from central Chile. Then, their relationships were evaluated through partial least squares regression. The average contents of phenolic acids, flavonoids and metals in honey ranged from 0.4 to 4 µg/g, 0.3-1.5 µg/g and 3-6 µg/g, respectively. All honeys showed accumulation of H2O2 (1-35 µg/g) and OH radicals. The PLS showed that gallic acid, p-coumaric acid, chrysin, kaempferol, Fe, and Mn stimulate the generation of ROS. Quercetin, Cu, and Zn showed marginal antioxidant effects. PFs favor the ABA of honey against both bacteria and H2O2 against S. epidermidis.

Effect of surfactants on the sorption-desorption, degradation, and transport of chlorothalonil and hydroxy-chlorothalonil in agricultural soils.

The fungicide chlorothalonil (CTL) and its metabolite hydroxy chlorothalonil (OH-CTL) constitute a risk of soil and water contamination, highlighting the need to find suitable soil remediation methods for these compounds. Surfactants can promote the bioavailability of organic compounds for enhanced microbial degradation, but the performance depends on soil and surfactant properties, sorption-desorption equilibria of contaminants and surfactants, and possible adverse effects of surfactants on microorganisms. This study investigated the influence of five surfactants [e.g., Triton X-100 (TX-100), sodium dodecyl sulphate (SDS), hexadecyltrimethylammonium bromide (HDTMA), Aerosol 22 and Tween 80] on the sorption-desorption, degradation, and mobility of CTL and OH-CTL in two volcanic and one non-volcanic soil. Sorption and desorption of fungicides depended on the sorption of surfactants on soils, surfactants' capacity to neutralize the net negative charge of soils, surfactants' critical micellar concentration, and pH of soils. HDTMA was strongly adsorbed on soils, which shifted the fungicide sorption equilibria by increasing the distribution coefficient (Kd) values. Contrarily, SDS and TX-100 lowered CTL and OH-CTL sorption on soils by decreasing the Kd values, which resulted in an efficient extraction of the fungicide compounds from soil. SDS increased the degradation of CTL, especially in the non-volcanic soil (DT50 values were 14 and 7 days in natural and amended soils, with final residues <7% of the initial dose), whereas TX-100 enabled an early start and sustenance of OH-CTL degradation in all soils. CTL and OH-CTL stimulated soil microbial activities without noticeable deleterious effects of the surfactants. SDS and TX-100 also reduced the vertical transport of OH-CTL in soils. Results of this study could be extended to soils in other regions of the world because the tested soils represent widely different physical, chemical, and biological properties.

Connecting the evidence about organic pollutant sorption on soils with environmental regulation and decision-making: A scoping review.

There exists an increase of review articles of pollutant sorption on soils due to the relevance of this process in environmental fate. However, this information is not used to make environmental decisions. We conduct a scoping review to identify and categorize the state-of-the-art of pesticide sorption (organic pollutant model) and decision-making studies in 2015-2020 using databases (Web of Science, Scopus and ScieLo) to detect potential gaps and create a framework that guide the connection between scientific evidence and its institutionalization. We detect research gaps (inside sorption or decision-making studies) and evidence gaps (between sorption and decision-making) from literature based on five categories to describe sorption (sorbate-sorbent system, system variables to study the sorption process, objectives pursued by authors, experimental approaches to study the sorption process, and quantification of sorption) and four topics for regulatory contexts (sponsor contextualization, descriptive information, environmentally relevant issues and Sustainable Development Goals (SDGs)). The gaps included (i) unrelated study designs, (ii) unreliable causal mechanisms, (iii) unrelated SDGs, (iv) lack of collaboration, (v) lack of representativeness, (vi) lack of knowledge, (vii) lack of relevant studies, and (vii) unknown causal extrapolation. Our framework connected the gaps with relevant environmental issues and common research topics on sorption studies, including suggested solutions and inclusion of lacking SDG in literature. The framework can assist the science-policy interaction, promoting cooperation for different study designs, pollutant-soil systems, and socio-environmental applications, such as environmental fate and management, risk assessment, monitoring, remediation, and local regulations.

Effect of Storage Conditions on the Quality of Arbequina Extra Virgin Olive Oil and the Impact on the Composition of Flavor-Related Compounds (Phenols and Volatiles).

Commercialization of extra virgin olive oil (EVOO) requires a best before date recommended at up to 24 months after bottling, stored under specific conditions. Thus, it is expected that the product retains its chemical properties and preserves its 'extra virgin' category. However, inadequate storage conditions could alter the properties of EVOO. In this study, Arbequina EVOO was exposed to five storage conditions for up to one year to study the effects on the quality of the oil and the compounds responsible for flavor. Every 15 or 30 days, samples from each storage condition were analyzed, determining physicochemical parameters, the profiles of phenols, volatile compounds, α-tocopherol, and antioxidant capacity. Principal component analysis was utilized to better elucidate the relationships between the composition of EVOOs and the storage conditions. EVOOs stored at -23 and 23 °C in darkness and 23 °C with light, differed from the oils stored at 30 and 40 °C in darkness. The former was associated with a higher quantity of non-oxidized phenolic compounds and the latter with higher elenolic acid, oxidized oleuropein, and ligstroside derivatives, which also increased with storage time. (E)-2-nonenal (detected at trace levels in fresh oil) was selected as a marker of the degradation of Arbequina EVOO quality over time, with significant linear regressions identified for the storage conditions at 30 and 40 °C. Therefore, early oxidation in EVOO could be monitored by measuring (E)-2-nonenal levels.

Effect of Co-contamination by PAHs and Heavy Metals on Bacterial Communities of Diesel Contaminated Soils of South Shetland Islands, Antarctica.

Diesel oil is the main source of energy used in Antarctica. Since diesel is composed of toxic compounds such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals, it represents a constant threat to the organisms inhabiting this continent. In the present study, we characterized the chemical and biological parameters of diesel-exposed soils obtained from King George Island in Antarctica. Contaminated soils present PAH concentrations 1000 times higher than non-exposed soils. Some contaminated soil samples also exhibited high concentrations of cadmium and lead. A 16S metagenome analysis revealed the effect of co-contamination on bacterial communities. An increase in the relative abundance of bacteria known as PAH degraders or metal resistant was determined in co-contaminated soils. Accordingly, the soil containing higher amounts of PAHs exhibited increased dehydrogenase activity than control soils, suggesting that the microorganisms present can metabolize diesel. The inhibitory effect on soil metabolism produced by cadmium was lower in diesel-contaminated soils. Moreover, diesel-contaminated soils contain higher amounts of cultivable heterotrophic, cadmium-tolerant, and PAH-degrading bacteria than control soils. Obtained results indicate that diesel contamination at King George island has affected microbial communities, favoring the presence of microorganisms capable of utilizing PAHs as a carbon source, even in the presence of heavy metals.

Relationship among the minor constituents, antibacterial activity and geographical origin of honey: A multifactor perspective.

Some minor constituents of honey samples were determined through a fluorometric-chemical characterization method and related multifactorially with their antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa and with their geographical origin. Rotated principal component analysis identified five significant components in honey: three related to antibacterial activity and linked to phenolic compounds; Maillard products; proteins; the concentration of H2O2 at 3 and 24 h of incubation; and a tyrosine-containing entity. On the other hand, five constituents (phenolic compounds were the most relevant) allowed the classification of honey samples by geographical origin with 87% certainty. The results showed that phenolic compounds and Maillard products are related to the sustained production of H2O2 over time, which in turn boosts the antibacterial activity of honey. Native flora could promote this capability. The results showed the effect of geographic origin on the content of the analyzed minor constituents of honey, particularly phenolic compounds.

Matrix solid-phase dispersion associated to gas chromatography for the assessment in honey bee of a group of pesticides of concern in the apicultural field.

A method based on matrix solid-phase dispersion (MSPD) associated to gas chromatography-flame photometric detection (GC-FPD), GC-electron capture detection (GC-ECD) and GC-mass spectrometry (GC-MS) for confirmation purposes, was developed for the determination of a representative group of twelve pesticides in honeybee with particular concern in the apicultural field (fipronil, thiamethoxam, acetamiprid, acrinathrin, metamidophos, dimetoathe, diazinon, chlorpyrifos, methidathion, profenophos, azinphos methyl and coumaphos). Factors influencing the extraction efficiency of MSPD were investigated and optimized through response surface method. The use of octadecylsilyl (C18) sorbent combined with a florisil clean-up and acetonitrile-methanol (99:1) elution was the optimal condition for the extraction of the selected pesticides. Under this condition the recovery of pesticides at the limit of quantification of the method (0.007 to 0.050 µg g-1) ranged from 68 to 102% with RSDs for within-laboratory reproducibility ≤20%. The proposed method was applied to the analysis of honeybees collected in 68 field hives from areas of great apicultural and agricultural development in central Chile. In 65% of these samples eight different pesticides were detected. Pesticides most frequently found were chlorpyrifos (34% of the samples, <0.017-0.067 µg g-1), acrinathrin (32% of the samples, <0.020-0.026 µg g-1) and diazinon (10% of the samples at values <0.015 µg g-1). The incidence of these pesticides in bees can be related to their high employ in central Chile, use to combat the varroosis in hives and hydrophobicity.

Degradation kinetics of chlorpyrifos and diazinon in volcanic and non-volcanic soils: influence of cyclodextrins.

The intensive use of insecticides such as chlorpyrifos (CPF) and diazinon (DZN) in the agricultural activities worldwide has produced contamination of soils and/or transport to non-target areas including their distribution to surface and groundwaters. Cyclodextrins (CDs) have been proposed as an alternative in remediation technologies based on the separation of contaminants from soils because they could allow a higher bioavailability for their degradation with a low environmental impact. In this work, the degradation pattern of CPF and DZN and the formation and dissipation of the major degradation products 3,5,6-trichloro-2-pyridinol (TCP) and 2-isopropyl-6-methyl-4-pyrimidinol (IMPH) was established in four agricultural volcanic and non-volcanic soils belonging to Andisol, Ultisol, and Mollisol orders. Both pesticides were highly adsorbed in these soils, consequently, with a greater probability of contaminating them. In contrast, the adsorption of their two main metabolites was low or null; therefore, they are potential groundwater contaminants. The degradation processes were studied in the natural and amended soils with ß-cyclodextrin (ß-CD) and methyl-ß-cyclodextrin (Mß-CD) for CPF and DZN, respectively. A slow degradation of CPF and DZN was obtained for volcanic soils with observable residues until the end of the incubation time (150-180 days). In Mollisols, the higher degradation rate of CPF was favored by the neutral to basic pH, and for DZN it was related to the lower adsorption and higher bioavailability. The amendment of soils with CDs produced slower degradation rates which led to a greater concentration of the compounds at the end of the incubation time. This effect was more pronounced for DZN. The exception was the Andisol, with no significant changes for both compounds regarding the unamended soil. No residues of TCP were observed for this soil in both conditions during the whole incubation time; nevertheless, the accumulation of TCP was significant in the Ultisol and Mollisols, but the concentrations were lower for the amended soils. The accumulation of IMPH was important in Mollisol amended soils; however, their residues were observed in the volcanic soils during the whole incubation period in the natural and amended soils. An important enhancement of the microbial activity occurred in the system ß-CD/CPF in Mollisols, without a more effective degradation of the insecticide. The opposite effect was observed in the system Mß-CD/DZN mainly in the oxidative activity in all soils. The higher degradation of DZN and IMPH in natural Mollisols was related to the higher hydrolytic and oxidative activities. The stability of the inclusion complexes formed could play an important role for explaining the results obtained with the amendments.

Phosphate Favors the Biosynthesis of CdS Quantum Dots in Acidithiobacillus thiooxidans ATCC 19703 by Improving Metal Uptake and Tolerance.

Recently, we reported the production of Cadmium sulfide (CdS) fluorescent semiconductor nanoparticles (quantum dots, QDs) by acidophilic bacteria of the Acidithiobacillus genus. Here, we report that the addition of inorganic phosphate to Acidithiobacillus thiooxidans ATCC 19703 cultures favors the biosynthesis of CdS QDs at acidic conditions (pH 3.5). The effect of pH, phosphate and cadmium concentrations on QDs biosynthesis was studied by using Response Surface Methodology (RSM), a multivariate technique for analytical optimization scarcely used in microbiological studies to date. To address how phosphate affects intracellular biosynthesis of CdS QDs, the effect of inorganic phosphate on bacterial cadmium-uptake was evaluated. By measuring intracellular levels of cadmium we determined that phosphate influences the capacity of cells to incorporate this metal. A relation between cadmium tolerance and phosphate concentrations was also determined, suggesting that phosphate participates in the adaptation of bacteria to toxic levels of this metal. In addition, QDs-biosynthesis was also favored by the degradation of intracellular polyphosphates. Altogether, our results indicate that phosphate contributes to A. thiooxidans CdS QDs biosynthesis by influencing cadmium uptake and cadmium tolerance. These QDs may also be acting as a nucleation point for QDs formation at acidic pH. This is the first study reporting the effect of phosphates on QDs biosynthesis and describes a new cadmium-response pathway present in A. thiooxidans and most probably in other bacterial species.

Effect of the composition of extra virgin olive oils on the differentiation and antioxidant capacities of twelve monovarietals.

The effect of the composition of twelve varieties of extra virgin olive oils (EVOOs) on their differentiation based in agronomic criteria and on the antioxidant capacity was studied. Principal component analysis permitted an overview of the samples and their compositions, showing evidence of grouping and correlation between antioxidant capacity, oleuropein and ligstroside derivatives (OLD) and specific extinction at 270. Oleic and linoleic acids, 3,4-DHPEA-EA and p-HPEA-EDA (OLD), unsaturated/saturated ratio and induction time (IT) allowed the correct classification of samples according to year of harvest, ripening stage and variety. The antioxidant capacity of EVOOs was satisfactory predicted through a partial least square model based on ΔK, hydroxytyrosol, pinoresinol, oleuropein derivate and IT. Validation of the model gave a correlation R>0.83 and an error of 7% for independent samples. This model could be a useful tool for the olive industry to highlight the nutritional quality of EVOOs and improve their marketing.

Isolation and Characterization of Phenanthrene Degrading Bacteria from Diesel Fuel-Contaminated Antarctic Soils.

Antarctica is an attractive target for human exploration and scientific investigation, however the negative effects of human activity on this continent are long lasting and can have serious consequences on the native ecosystem. Various areas of Antarctica have been contaminated with diesel fuel, which contains harmful compounds such as heavy metals and polycyclic aromatic hydrocarbons (PAH). Bioremediation of PAHs by the activity of microorganisms is an ecological, economical, and safe decontamination approach. Since the introduction of foreign organisms into the Antarctica is prohibited, it is key to discover native bacteria that can be used for diesel bioremediation. By following the degradation of the PAH phenanthrene, we isolated 53 PAH metabolizing bacteria from diesel contaminated Antarctic soil samples, with three of these isolates exhibiting a high phenanthrene degrading capacity. In particular, the Sphingobium xenophagum D43FB isolate showed the highest phenanthrene degradation ability, generating up to 95% degradation of initial phenanthrene. D43FB can also degrade phenanthrene in the presence of its usual co-pollutant, the heavy metal cadmium, and showed the ability to grow using diesel-fuel as a sole carbon source. Microtiter plate assays and SEM analysis revealed that S. xenophagum D43FB exhibits the ability to form biofilms and can directly adhere to phenanthrene crystals. Genome sequencing analysis also revealed the presence of several genes involved in PAH degradation and heavy metal resistance in the D43FB genome. Altogether, these results demonstrate that S. xenophagum D43FB shows promising potential for its application in the bioremediation of diesel fuel contaminated-Antarctic ecosystems.

Influence of selected cyclodextrins in sorption-desorption of chlorpyrifos, chlorothalonil, diazinon, and their main degradation products on different soils.

Cyclodextrins (CDs) can improve the apparent solubility and bioavailability of a variety of organic compounds through the formation of inclusion complexes; accordingly, they are suitable for application in innovative remediation technologies of contaminated soils. However, the different interactions in the tertiary system CD/contaminant/soil matrix can affect the bioavailability of the inclusion complex through the possible sorption of CD and CD complex in the soil matrix, as well as with the potential of the sorbed CD to form the complex, concurrent with the desorption processes. This work focuses in changes produced by three different CDs in soil sorption-desorption processes of chlorpyrifos (CPF), diazinon (DZN), and chlorothalonil (CTL), and their major degradation products, 3,5,6-trichloro-2-pyridinol (TCP), 2-isopropyl-6-methyl-4-pyrimidinol, and hydroxy-chlorothalonil (OH-CTL). Cyclodextrins used were ß-cyclodextrin (ß-CD), methyl-ß-cyclodextrin (Mß-CD), and 2-hydroxypropyl-ß-cyclodextrin (HPß-CD). The studied soils belong to the orders Andisol, Ultisol, and Mollisol with different organic matter contents, mineral composition, and pH. The apparent sorption constants were significantly lower for the three pesticides in the presence of all CDs. The highest displacement of sorption equilibria was produced by the influence of Mß-CD, with the most pronounced effect for CPF, a pesticide strongly sorbed on soils. The same was obtained for TCP and OH-CTL, highlighting the need to assess the risk of generating higher levels of groundwater contamination with polar metabolites if degradation rates are not controlled. The highest desorption efficiency was obtained for the systems CPF-ß-CD, DZN-Mß-CD, and CTL-Mß-CD. Since the degree of adsorption of the complex is relevant to obtain an increase in the bioavailability of the contaminant, a distribution coefficient for the complexed pesticide in all CD-soil-pesticide system was estimated by using the apparent sorption coefficients, the stability constant for each CD-pesticide complex, and the distribution coefficients of free pesticide.

Analysis of 25 C NBOMe in Seized Blotters by HPTLC and GC-MS.

Use of unauthorized synthetic drugs is a serious, forensic, regulatory and public health issue. In this scenario, consumption of drug-impregnated blotters is very frequent. For decades, blotters have been generally impregnated with the potent hallucinogen known as lysergic acid diethylamide (LSD); however, since 2013 blotter stamps with N-2 methoxybenzyl-substituted phenylethylamine hallucinogen designated as "NBOMes" have been seized in Chile. To address this issue with readily accessible laboratory equipment, we have developed and validated a new HPTLC method for the identification and quantitation of 25-C-NBOMe in seized blotters and its confirmation by GC-MS. The proposed method was validated according to SWGTOX recommendations and is suitable for routine analysis of seized blotters containing 25-C-NBOMe. With the validated method, we analyzed 15 real samples, in all cases finding 25-C-NBOMe in a wide dosage range (701.0-1943.5 µg per blotter). In this situation, we can assume that NBOMes are replacing LSD as the main hallucinogenic drug consumed in blotters in Chile.

Determination of imidacloprid in water samples via photochemically induced fluorescence and second-order multivariate calibration.

This paper presents a new method for the determination of imidacloprid in water samples; one of the most widely used neonicotinoid pesticides in the farming industry. The method is based on the measurement of excitation-emission spectra of photo-induced fluorescence (PIF-EEMs) associated with second-order multivariate calibration with a parallel factor analysis (PARAFAC) and unfolded partial least squares coupled to residual bilinearization (U-PLS/RBL). The second order advantage permitted the determination of imidacloprid in the presence of potential interferences, which also shows photo-induced fluorescence (other pesticides and/or unexpected compounds of the real samples). The photoreaction was performed in 100-µl disposable micropipettes. As a preliminary step, solid phase extraction on C18 (SPE-C18) was applied to concentrate the analyte and diminish the limit of detection. The LOD was approximately 1 ng mL(-1), which is suitable for detecting imidacloprid in water according to the guidelines established in North America and Europe. The PIF-EEMs coupled to PARAFAC or U-PLS/RBL was successfully applied for the determination of imidacloprid in different real water samples, with an average recovery of 101±10%.

Sorption-desorption behavior of pesticides and their degradation products in volcanic and nonvolcanic soils: interpretation of interactions through two-way principal component analysis.

Sorption-desorption behavior of six pesticides and some degradation products was assessed on seven agricultural volcanic and nonvolcanic soils belonging to Andisol, Ultisol, Mollisol, and Alfisol orders. The global interpretation of sorption data was performed by principal component analysis. Results showed exceptionally high sorption of glyphosate and aminomethylphosphonic acid (AMPA) (the breakdown product) on volcanic soils (K f > 1500 µg(1 - 1 / n) mL(1 / n) g(-1)) related mainly to contents of amorphous aluminum oxides (Andisols) and crystalline minerals (Ultisols). The lower sorption on nonvolcanic soils was associated to low organic matter contents and lack of significant minerals. Metsulfuron-methyl and 3,5,6-trichloro-2-pyridinol (metabolite of chlorpyrifos) were weakly to substantially sorbed on Andisols and Ultisols, but the first one was not sorbed at pH > 6.4, including nonvolcanic soils. The metabolite of diazinon, 2-isopropyl-4-methyl-6-hydroxypyrimidine, was weakly sorbed on all soils (K f = 0.4 to 3.6 µg(1 - 1 / n) mL(1 / n) g(-1)). Acidic compounds would be lixiviated in Mollisols and Alfisols, but they could leach also in Andisols and Ultisols if they reach greater depths. Atrazine and deethylatrazine sorption was related to organic carbon content; therefore, they were weakly retained on nonvolcanic soils (K f = 0.7 to 2.2 µg(1 - 1 / n) mL(1 / n) g(-1)). Chlorpyrifos was highly sorbed on all soils reaching K OC values of >8000. Finally, the significant retention of chlorothalonil and diazinon on Mollisols and Alfisols in spite of their low OC contents showed the contribution of clay minerals in the sorption process.

New biomimetic approach to determine the bioavailability of triclosan in soils and its validation with the wheat plant uptake bioassay.

A new biomimetic approach for triclosan (TCS) was developed based on the leaching of the analyte from different biosolid-amended agricultural soils and the subsequent extraction of the leachates, using a rotating disk sorptive extraction (RDSE) procedure. The leaching equilibrium for TCS was reached at 3h when the ISO method (ISO/TS 21268-1:2007) was followed. The concentrations determined by this biomimetic method were compared with the bioavailability of TCS, determined by its accumulation in the roots of wheat plants grown in the same soil-biosolid systems. It was observed that the amount of organic matter in the soil matrix was a determining factor for mobilization of TCS. An increasing biosolid rate applied to soils resulted in a reduced mobility of TCS because the high amount of organic matter provided by the biosolid increased the hydrophobic interaction between TCS and the matrix. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of TCS to the wheat plant. Thus, the bioavailability factor in wheat roots decreased from 0.22 to 0.08 for a soil having a pH of 8.2, when the biosolid rate was increased from 30 to 200 Mg ha(-1), respectively. A significant correlation (R=0.98) was obtained between TCS concentration in wheat plants and the proposed biomimetic methodology, indicating that the latter can predict the bioavailability in a time period as short as 180 min. The results of this study confirm our previous findings that amending soils with biosolids is beneficial for immobilizing low polarity contaminants and helps prevent their percolation through the soil profile and into groundwater.

Determination of glyphosate and aminomethylphosphonic acid in aqueous soil matrices: a critical analysis of the 9-fluorenylmethyl chloroformate derivatization reaction and application to adsorption studies.

The assessment of the environmental fate of glyphosate and its degradation product (aminomethylphosphonic acid) is of great interest given the widespread use of the herbicide. Studies of adsorption-desorption and transport processes in soils require analytical methods with sensitivity, accuracy, and precision suitable for determining the analytes in aqueous equilibrium solutions of varied complexity. In this work, the effect of factors on the yield of the derivatization of both compounds with 9-fluorenylmethyl chloroformate for applying in aqueous solutions derived from soils was evaluated through factorial experimental designs. Interference effects coming from background electrolytes and soil matrices were established. The whole method had a linear response up to 640 ng/mL (R(2) > 0.999) under optimized conditions for high-performance liquid chromatography with fluorescence detection. Limits of detection were 0.6 and 0.4 ng/mL for glyphosate and aminomethylphosphonic acid, respectively. The relative standard deviation was 4.4% for glyphosate (20 ng/mL) and 5.9% for aminomethylphosphonic acid (10 ng/mL). Adsorption of compounds on four different soils was assessed. Isotherm data fitted well the Freundlich model (R(2) > 0.97). Kf constants varied between 93 ± 3.1 and 2045 ± 157 for glyphosate and between 99 ± 4.1 and 1517 ± 56 (µg(1-1/) (n)  mL(1/) (n) ( ) g(-1) ) for aminomethylphosphonic acid, showing the broad range of applicability of the proposed method.

Determination of heavy polycyclic aromatic hydrocarbons of concern in edible oils via excitation-emission fluorescence spectroscopy on nylon membranes coupled to unfolded partial least-squares/residual bilinearization.

Seven heavy polycyclic aromatic hydrocarbons (PAHs) of concern on the US Environmental Protection Agency priority pollutant list (benzo[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-c,d]-pyrene) were simultaneously analyzed in extra virgin olive oil. The analysis is based on the measurement of excitation-emission matrices on nylon membrane and processing of data using unfolded partial least-squares regression with residual bilinearization (U-PLS/RBL). The conditions needed to retain the PAHs present in the oil matrix on the nylon membrane were evaluated. The limit of detection for the proposed method ranged from 0.29 to 1.0 µg kg(-1), with recoveries between 64 and 78 %. The predicted U-PLS/RBL concentrations compared favorably with those measured using high-performance liquid chromatography with fluorescence detection. The proposed method was applied to ten samples of edible oil, two of which presented PAHs ranging from 0.35 to 0.63 µg kg(-1). The principal advantages of the proposed analytical method are that it provides a significant reduction in time and solvent consumption with a similar limit of detection as compared with chromatography.

Characterization of the atrazine sorption process on Andisol and Ultisol volcanic ash-derived soils: kinetic parameters and the contribution of humic fractions.

Atrazine sorption was studied in six Andisol and Ultisol soils. Humic and fulvic acids and humin contributions were established. Sorption on soils was well described by the Freundlich model. Kf values ranged from 2.2-15.6 µg(1-1/n)mL(1/n)g⁻¹. The relevance of humic acid and humin was deduced from isotherm and kinetics experiments. KOC values varied between 221 and 679 mLg⁻¹ for these fractions. Fulvic acid presented low binding capacity. Sorption was controlled by instantaneous equilibrium followed by a time-dependent phase. The Elovich equation, intraparticle diffusion model, and a two-site nonequilibrium model allowed us to conclude that (i) there are two rate-limited phases in Andisols related to intrasorbent diffusion in organic matter and retarded intraparticle diffusion in the organo-mineral complex and that (ii) there is one rate-limited phase in Ultisols attributed to the mineral composition. The lower organic matter content of Ultisols and the slower sorption rate and mechanisms involved must be considered to assess the leaching behavior of atrazine.

Rotating disk sorptive extraction of triclosan and methyl-triclosan from water samples.

A method of sample preparation based on use of rotating disk sorptive extraction (RDSE) has been developed for determination of triclosan (TCS) and methyl-triclosan (MTCS) in water samples. The sorptive and desorptive behavior of the analytes was studied by use of a rotating disk coated with polydimethylsiloxane (PDMS) on one of its surfaces. Chemical and extraction behavior were studied to establish the best conditions for extraction. The optimum conditions for both analytes were: sample volume 25 mL, pH 4.5, NaCl concentration 6% (w/v), disk rotational velocity 1,250 rpm, and extraction time 80 min. A desorption time of 30 min was used with 5 mL methanol. The detection limits for TCS and MTCS were 46 and 34 ng L(-1), respectively. Recovery was evaluated at two concentrations, 160 and 800 ng L(-1), and the values obtained were between 80 and 100%. The method was applied to analysis of influent water at two treatment plants in Santiago, Chile.