The anteroposterior distance between the posterior edge of the medial tibial condyle and the posterior edge of the fibular head in the lateral view can be a reference in determining the axis perpendicular to the tibial anteroposterior axis.

BACKGROUND: Obtaining an accurate tibial lateral view is important during high tibial osteotomy. This study investigated whether the posterior edge of the medial/lateral tibial condyle (PEMTC/PELTC) and the posterior edge of the fibular head (PEFH) in a lateral view could be a reference for determining the accurate tibial lateral view. METHODS: A total of 75 lower limbs in 38 subjects were evaluated in this study. In order to target healthy knees, subjects undergoing primary total hip arthroplasty were selected. The MF/LF, comprising the anteroposterior distance between PEMTC/PELTC and PEFH, was measured on the lateral view of the tibial bone model based on the tibial anteroposterior (AP) axis (true lateral view: TLV). In addition, measurements were calculated in the model with a 10° external/internal rotation. Using these measurements, linear regression analysis was performed to predict the tibial rotation with MF/LF. RESULTS: The mean MF/LF was 0.9/4.6 mm (P < 0.001). MF and LF increased with incremental tibial rotation. Regression formulas were derived from these results as follows: Tibial rotation = (1) -1.01 + 1.06 × MF (R2 = 0.87, P < 0.001), (2) -8.70 + 1.86 × LF (R2 = 0.51, P < 0.001). The mean tibial rotation angle when MF was 0 mm was -0.9°. CONCLUSIONS: Based on formula (1) and actual measurements, the mean tibial rotation angle when MF is 0 mm is an internal rotation of about 1°. Therefore, a lateral view, in which PEMTC and PEFH are seen colinearly, can be the approximate TLV. The MF can be a suitable intraoperative reference in determining TLV.

Accuracy of acetabular cup placement during anterolateral supine total hip arthroplasty using intraoperative fluoroscopy: a retrospective study.

BACKGROUND: In our institution, total hip arthroplasty (THA) is performed using the anterolateral supine (ALS) approach with intraoperative fluoroscopy. This study aimed to investigate and review the accuracy of acetabular cup placement in ALS-THA using intraoperative fluoroscopy. METHODS: A total of 142 patients with 154 joints (mean age 64.3 years, 30 males and 112 females) underwent ALS-THA with intraoperative fluoroscopy at the same institution. The target angle of the cup position was set at 40° for radiographic inclination (RI) and 5°-25° for radiographic anteversion (RA) based on the functional pelvic plane according to the pelvic motion during individual postural changes. The cup position angle was measured using postoperative computed tomography, and the error in the target angle was investigated. RESULTS: The target angle of RI was 40°, and the postoperative RI was 39.3° ± 4.3°. The target angle of the RA was 17° ± 2.6°, and the postoperative RA was 20.6° ± 3.7°. The absolute values of the error from the target angle were 3.6° ± 2.5° for RI and 4.2° ± 3.3° for RA. For RI and RA, 67.5% (104/154 joints) were within ± 5° of the target and 96.1% (148/154 joints) were within ± 10°. CONCLUSIONS: The accuracy of cup positioning in ALS-THA using intraoperative fluoroscopy was good and appeared comparable to that of various navigation systems.

MRI Findings of Muscle Damage after Total Hip Arthroplasty Using the Complete Muscle Preserving Anterolateral Supine Approach.

Background and Objectives: We performed anterolateral total hip arthroplasty (ALS THA) with the purpose of complete muscle-tendon preservation without muscle-tendon dissection. This study aimed to evaluate muscle damage in the periprosthetic hip joint muscles of patients undergoing ALS THA at 1-year post-operative hip magnetic resonance imaging (MRI). Materials and Methods: We evaluated changes in the muscle cross-sectional area (M-CSA) and fatty atrophy of the periprosthetic muscles. We also assessed the Harris hip score on pre-operative and 12-month post-operative MRI in 66 patients who underwent ALS THA. The grade of M-CSA atrophy was classified into no atrophy, slight atrophy, moderate atrophy, and severe atrophy. Fatty atrophy was classified as improved, no change, and worsened using the Goutallier classification. Results: More than 90% of patients' M-CSA had no atrophy in the obturator internus (Oi), obturator externus (Oe), gluteus medius (Gmed), and gluteus minimus (Gmin), and some improvement was observed in terms of fatty atrophy. In contrast, M-CSA of the tensor fascia latae (TFL) muscle was clearly decreased, and there was no improvement in the TFL fatty atrophy. However, the presence or absence of TFL atrophy did not affect clinical outcome. Conclusions: We performed the complete muscle preserving procedure, ALS THA, with attention to preserving the Oi and Oe by direct visual confirmation and gentle treatment of the Gmed and Gmin with effective retraction. Post-operative M-CSA atrophy evaluation on MRI showed that the Oi, Oe, Gmed, and Gmin were satisfactorily preserved; however, the TFL was clearly atrophic. In the ALS approach, where entry is made between Gmed and TFL, atrophy of the TFL due to superior gluteal nerve injury must be tolerated to some extent.

The medial tangent of the proximal tibia is a suitable extra-articular landmark in determining the tibial anteroposterior axis.

BACKGROUND: Tibial rotational alignment in total knee arthroplasty (TKA) is generally determined based on intra-articular structure, and can be difficult to ascertain in some cases. The aim of this study was to investigate whether the medial tangent angle of the tibia (MTAT) could be useful in determining the anteroposterior axis of the tibia. METHODS: This study was performed on 103 lower limbs in 53 patients who underwent primary total hip arthroplasty. The selection criteria for our study were based on the assumption that knees in patients undergoing THA exhibit fewer degenerative changes than knees in patients undergoing TKA. Using computed tomography images, the MTAT, comprising the medial tangent of the proximal tibia and the anteroposterior (AP) axis of the tibia, was measured on three horizontal planes: at the distal edge of the tibial tubercle (A), at 5 cm distally (B), and at 10 cm further distally (C). The tibial medial surface was grouped into three classes according to shape: valley type, flat type, and hill type. The percentage at which these shapes were observed in each group was also calculated. Measurement reliability was calculated using the intraclass correlation coefficient. RESULTS: The angles were 45.2° (interquartile range: IR 43.0-47.7) at A, 42.7° (IR 38.7-45.9) at B, and 42.4° (IR 38.2-45.9) at C. Intra-rater reliability and inter-rater reliability was 0.982 and 0.974 at A, 0.810 and 0.411 at B, and 0.940 and 0.811 at C, respectively. Regarding the tibial medial surface, the valley type was observed in all cases at A, and the hill type was observed in the highest percentage of cases at B and C. CONCLUSIONS: The MTAT was approximately 45° at level A, and reproducibility was the highest among the three groups. The two points forming the valley on the tibial medial surface were bony ridges. Therefore, the medial tangent of the tibia at level A could be easily determined. Because the distal edge of the tibial tubercle exists at the surgical area and the extra-articular area, it can be a suitable intraoperative, extra-articular landmark in determining the tibial AP axis, even for revision TKA.

Union, Knee Alignment, and Clinical Outcomes of Patients Treated With Autologous Bone Grafting for Medial Tibial Defects in Primary Total Knee Arthroplasty.

Autologous bone grafting is an established method to overcome bone deficiencies in primary total knee arthroplasty (TKA). However, recently, metal augments have been used by many surgeons. Although autologous bone grafting is a common technique, few large studies have described its success in achieving bone union in primary TKA. The goal of this study was to evaluate primary TKA with autologous bone grafting for tibial defects. A total of 68 knees that had undergone arthroplasty with autologous bone grafting with more than 1 year of follow-up were evaluated. Average follow-up was 6.6 years (range, 1.2-14.6 years). The autologous bone grafting procedure attached the proximal portion of the tibial resection from the lateral side to the bone graft on the medial side with 2 screws. The prosthesis, which had a standard and nonrevision stem, was implanted with cement. Bone union was assessed with fluoroscopic radiography with a weight-bearing anteroposterior view. The rate of bone union was 97% (65 knees). Correction of preoperative alignment was achieved and maintained until final follow-up. Postoperative knee angle and knee and function scores showed significant improvement. One infection occurred, but there were no local complications, such as backout of screws or collapse of bone grafts. The authors believe that autologous bone graft within TKA is a relatively simple and effective procedure that provides good bone union. [Orthopedics. 2017; 40(4):e604-e608.].