RESUMEN
Determining the reliability of nanofiltration (NF) membranes for the removal of contaminants of emerging concern, including polyfluoroalkyl substances (PFASs), pharmaceuticals, and personal care products (PPCPs), is important for ensuring drinking water safety. This study aimed to clarify the factors that influence the removal of nine major PFASs during submerged NF treatment via extrapolation based on the factors that influence PPCP removal. The rejection of nine PFASs in ultra-filtered dam water by a polypiperazine-amide (NF270) membrane increased from 71 % to 94 % at a low permeate flux of 5 L/m2 h as the PFAS molecular dimensions increased. PFASs with a carboxylic acid (-CO2H) were rejected to a greater extent than PFASs with a sulfo group (-SO3H). Further, negatively charged PFASs or PPCPs were rejected to a greater extent than uncharged and positively charged PPCPs. Our findings suggest that the rejection of PFASs can vary because of the (i) clearance distance between the PFASs' molecular dimensions and NF membrane pore diameter and (ii) intensity of electrostatic repulsion between the PFASs' functional groups and NF membrane surface. Our study indicates that submerged NF can achieve high PFAS rejection; however, variations in rejection among PFASs can become more prominent owing to a low permeate flux.
RESUMEN
Advanced drinking water treatment process using nanofiltration (NF) membranes has gained attention recently because it removes many challenging constituents in contaminated surface waters, such as dissolved organics and heavy metals. However, much literature has reported high variations and uncertainties of NF membranes for removing nitrogen compounds in the contaminated water-ammonium (NH4+), nitrates (NO3-), and nitrites (NO2-). This study aimed to identify the ability of commercial NF membranes to remove NH4+, NO2-, and NO3- and clarify the mechanisms underlying their transport through NF membranes. This was examined by evaluating their rejection by three commercial NF membranes using artificial and actual river waters under various conditions (variable permeate flux, temperature, pH, and ionic strength). Ammonium commonly showed the highest removal among the three nitrogen compounds, followed by nitrites and nitrates. Interestingly, ammonium removal varied considerably from 6% to 86%, depending on the membrane type and operating conditions. The results indicated that the selected nitrogen compounds (NH4+, NO2-, and NO3-) could be highly rejected depending on the clearance between their hydrated radius and the membrane's pore walls. Further, the rejection of the lowest molecular-weight nitrogen compound (NH4+) could be higher than NO2- and NO3- due to its highest energy barrier and larger hydrated radius. This study suggests that compliance with the drinking water regulations of NH4+, NO2-, and NO3- can be reliably achieved by selecting appropriate membrane types and predicting the range of their removal under various feed water quality and operating conditions.
Asunto(s)
Compuestos de Amonio , Agua Potable , Nitratos/análisis , Nitritos/análisis , Dióxido de Nitrógeno , Nitrógeno/análisisRESUMEN
Multidrug-resistant Pseudomonas aeruginosa (MDRP) is one of the most important pathogens in clinical practice. To clarify the mechanisms contributing to its emergence, we isolated MDRPs using the P. aeruginosa PAO1, the whole genome sequence of which has already been elucidated. Mutant strains resistant to carbapenems, aminoglycosides, and new quinolones, which are used to treat P. aeruginosa infections, were isolated; however, none met the criteria for MDRPs. Then, PAO1 strains were exposed to these antimicrobial agents in various orders and the appearance rate of MDRP varied depending on the order of exposure; MDRPs more frequently appeared when gentamicin was applied before ciprofloxacin, but were rarely isolated when ciprofloxacin was applied first. Exposure to ciprofloxacin followed by gentamicin increased the expression of MexCD-OprJ, an RND-type multidrug efflux pump, due to the NfxB mutation. In contrast, exposure to gentamicin followed by ciprofloxacin resulted in more mutations in DNA gyrase. These results suggest that the type of quinolone resistance mechanism is related to the frequency of MDRP and that the risk of MDRP incidence is highly dependent on the order of exposure to gentamicin and ciprofloxacin.
Asunto(s)
Proteínas de Transporte de Membrana , Pseudomonas aeruginosa , Proteínas de Transporte de Membrana/metabolismo , Incidencia , Antibacterianos/farmacología , Antibacterianos/metabolismo , Ciprofloxacina/farmacología , Ciprofloxacina/metabolismo , Gentamicinas/farmacología , Gentamicinas/metabolismo , Pruebas de Sensibilidad MicrobianaRESUMEN
Ensuring the microbiological safety of drinking water is critical to protect public health. This study aimed to evaluate the reliability of real-time bacteriological counter coupled with an online dialysis membrane-based pre-treatment system for continuously monitoring bacterial cell counts in sand filter effluents of a full-scale drinking water treatment plant. The pre-treatment system, which included anion exchange resins (porous polymeric microbeads that trap ions for releasing other ions) for dialysate regeneration, successfully achieved the stable attenuation of background interfering substances (humic acids) during the 19-d test. The real-time bacteriological counter equipped with the pre-treatment system provided a continuous profile of bacterial cell counts in the sand filter effluent (0.2-2.5 × 104 counts/mL). The online analysis identified different timing of concentration peaks between particle and bacterial cell counts after backwashing. Bacterial community analysis revealed that Proteobacteria, Planctomycetes, and Cyanobacteria were the dominating phyla. Further, total bacterial cell counts determined by fluorescence microscopy and SYBR® Green I staining, a commonly accepted parameter, was found to be an indicator of online-monitored bacterial cell counts. The results indicated the potential of monitoring the bacterial cell counts in a sand filter process for providing an early warning of filter failures, which can allow plant operators to diagnose the overall system and provide countermeasures.
Asunto(s)
Agua Potable , Purificación del Agua , Filtración , Diálisis Renal , Reproducibilidad de los ResultadosRESUMEN
Achieving high water recovery using reverse osmosis membranes is challenging during water recycling because the increased concentrations of organics and inorganics in wastewater can cause rapid membrane fouling, necessitating frequent cleaning using chemical agents. This study evaluated the potential of membrane distillation to purify reverse osmosis-concentrated wastewater and achieve 98% overall water recovery for potable water reuse. The results indicate that membrane fouling during membrane distillation treatment was low (4% reduction in permeability) until 98% water recovery. In contrast, membrane fouling during reverse osmosis treatments was high (73% reduction in permeability) before reaching 90% water recovery. Furthermore, membrane distillation showed superior performance in removing dissolved ions (99.9%) from wastewater as compared with reverse osmosis (98.9%). However, although membrane distillation removed most trace organic chemicals tested in this study, a negligible rejection (11%) was observed for N-nitrosodimethylamine, a disinfection byproduct regulated in potable water reuse. In contrast, RO treatment exhibited a high removal of N-nitrosodimethylamine (70%). Post-treatment (e.g., advanced oxidation) after reverse osmosis and membrane distillation may be needed to comply with the N-nitrosodimethylamine regulations. Overall, the membrane distillation process had the capacity to purify reverse osmosis concentrate with insignificant membrane fouling.
Asunto(s)
Agua Potable , Purificación del Agua , Destilación , Membranas Artificiales , Ósmosis , Aguas ResidualesRESUMEN
The ultraviolet (UV)-based advanced oxidation process (AOP) is a powerful technology for removing pathogenic microorganisms and contaminants of emerging concern (CECs) from water. AOP in potable water reuse has been predominantly based on traditional low-pressure mercury (LP-Hg) lamps at 254 nm wavelength, supplemented by hydrogen peroxide addition. In this review, we assessed the potential of unconventional UV wavelengths (UV-B, 280-315 nm and UV-C, 100-280 nm) compared to conventional one (254 nm) in achieving the attenuation of pathogens and CECs. At the same UV doses, conventional 254 nm LP-Hg lamps and other sources such as, 222 nm KrCl lamps and 265 nm UV-LEDs, showed similar disinfection capability for viruses, protozoa, and bacteria, and the effect of hydrogen peroxide (H2O2) addition on disinfection remained unclear. The attenuation levels of key CECs in potable water reuse (N-nitrosodimethylamine and 1,4-dioxane) by 185 + 254 nm LP-Hg or 222 nm KrCl lamps were generally greater than those by conventional 254 nm LP-Hg and other UV lamps. CEC degradation was generally enhanced by H2O2 addition. Overall, our review suggests that 222 nm KrCl or 185 + 254 nm LP-Hg lamps with the addition of H2O2 would be the best alternative to conventional 254 nm LP-Hg lamps for achieving target removal levels of both pathogens and CECs in potable water reuse.
Asunto(s)
Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Dimetilnitrosamina , Dioxanos , Peróxido de HidrógenoRESUMEN
Advanced oxidation processes (AOPs) play a vital role in attenuating contaminants of emerging concern (CECs) during potable water reuse. AOPs are conventionally performed by irradiating with a 254-nm low-pressure (LP) mercury-vapor (Hg) ultraviolet (UV) lamp along with chemical treatment. Compared with UV-C light treatment (200-280 nm), vacuum-UV (V-UV) light treatment (100-200 nm) is advantageous in terms of hydroxyl radical generation without the requirement for chemical treatment. This study assessed the potential of V-UV (172-nm Xe2 excimer or 185 + 254-nm LP-Hg) lamps on the destruction of two major CECs in potable water reuse, namely N-nitrosodimethylamine (NDMA) and 1,4-dioxane. Direct irradiation using UV254 nm or UV185+254 nm lamps achieved ≥94% removal of N-nitrosamines, including NDMA, at a UV dose of 900 mJ/cm2. In contrast, the Xe2 excimer lamp (UV172 nm) was less effective for N-nitrosamine removal, achieving up to 82% removal of NDMA. The removal of 1,4-dioxane by V-UV lamps at a UV dose of 900 mJ/cm2 reached 51% (UV172 nm) and 28% (UV185+254 nm), both of which results were superior to that obtained using a conventional UV254 nm lamp (10%). The addition of hydrogen peroxide during UV254 nm or UV185+254 nm irradiation was found to enhance the removal of 1,4-dioxane, while UV172 nm irradiation without hydrogen peroxide addition still exhibited greater efficiencies than those UV254 nm lamps-based AOPs. Overall, this study demonstrated that the removal of both NDMA and 1,4-dioxane can be successfully achieved using either a UV254+185 nm lamp with hydrogen peroxide or a UV172 nm Xe2 excimer lamp without hydrogen peroxide.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Dimetilnitrosamina , Dioxanos , Peróxido de Hidrógeno , Oxidación-Reducción , Fotólisis , Rayos Ultravioleta , VacioRESUMEN
Membrane fouling is a major challenge toward achieving direct nanofiltration (NF) treatment of surface water. This study aimed to evaluate the potential of the novel submerged flat-sheet NF membrane module to achieve low fouling propensity and high separation performance during the direct filtration of surface water. Laboratory-scale NF tests showed that the transmembrane pressure (TMP) increased only by 10 kPa over 24 d during the direct treatment of river and dam water. The NF system showed high (>80%) and stable rejection of color and organics, as well as low and variable conductivity rejection (28-47%). The rejection of negatively charged trace organic chemicals (TOrCs) was >50%, while that of uncharged or positively charged TOrCs was <50%. Another NF test that was conducted at a drinking water treatment plant showed negligible membrane fouling with a TMP increase of 3 kPa over 35 d. Separation performance of the NF system remained high: total organic carbon (TOC) removal was >70%, which was greater than the conventional rapid sand filtration system with powdered activated carbon and intermediate chlorine doses (TOC removal = 20-60%). Overall, this study demonstrated high water quality and stable system operation of the submerged flat-sheet NF system during direct treatment of surface water.
Asunto(s)
Agua Potable , Purificación del Agua , Filtración , Membranas Artificiales , Compuestos Orgánicos/análisisRESUMEN
Pre-concentration of wastewater using a forward osmosis (FO) membrane prior to processing by an anaerobic digester can enhance biogas production. However, biofouling caused by microbes in wastewater remains a challenge. The study aimed to evaluate the efficacy of chloramination in mitigating the biofouling of an FO membrane during a single-pass concentration of primary wastewater effluent. Pre-disinfection at a chloramine dose of 22-121 mg/L successfully alleviated membrane fouling. Bacterial cell counts in the feed and concentrate showed that most of the bacterial cells in the wastewater were trapped on the membrane surface or spacer. The FO membrane surfaces in non-chloraminated/chloraminated systems were fully-covered by intact/damaged bacterial cells, respectively, indicating that chloramination effectively mitigated biofouling. However, due to high permeate-recovery and low cross-flow velocity in a single-pass concentration process, organic fouling on the membrane surface (and possibly on the interior wall of the membrane-pores) appeared to cause a gradual reduction in permeate-flux. This study demonstrated successful biofouling control using chloramination during a single-pass and high-recovery pre-concentration of primary wastewater effluent.
Asunto(s)
Eliminación de Residuos Líquidos/métodos , Incrustaciones Biológicas , Cloraminas , Membranas Artificiales , Ósmosis , Aguas Residuales , Purificación del AguaRESUMEN
Real-time bacteriological counting technology is capable of providing an online profile of bacterial removal during the wastewater treatment process, and can enhance the safety of recycled water for potable water reuse. However, autofluorescence emanating from dissolved organic compounds present in treated wastewater interferes with the analysis. In this study, a novel approach is adopted, viz., dialysis treatment for the removal of dissolved interfering substances from treated wastewater, and the efficiency of this treatment protocol is evaluated as a pre-treatment technique for real-time bacteriological counting. Dialysis using membranes having a molecular weight cut-off (MWCO) of 1000 kDa and 6-8 kDa were found to successfully reduce the intensity of autofluorescence emitted from the interfering substances; whereas the courser dialysis membrane having a MWCO of 1000 kDa was found to be more effective in removing the interfering substances. Here we demonstrate for the first time that continuous online dialysis treatment aids in the direct determination of the bacterial counts in ultrafiltration- and membrane bioreactor-treated wastewaters. The results of the study indicate that the dialysis pre-treatment technique is effective for continuously reducing the concentration of interfering substances in treated wastewater, and thus allows for direct online counting of bacteria.
Asunto(s)
Carga Bacteriana , Reactores Biológicos , Diálisis , Membranas Artificiales , Ultrafiltración , Aguas Residuales , Purificación del AguaRESUMEN
Chloramination is a conventional and successful pre-disinfection approach to control biological fouling for reverse osmosis (RO) treatment in water reuse. This study aimed to evaluate the possibility of using a new disinfectant-stabilized hypobromite-in controlling membrane fouling and the formation of a particular carcinogenic disinfection byproduct (DBP)-N-nitrosodimethylamine (NDMA). Our accelerated chemical exposure tests showed that the new disinfectant reduced the permeability of a polyamide RO membrane permeability from 6.7 to 4.1â¯L/m2hbar; however, its treatment impact was equivalent to that of chloramine. The disinfection efficacy of stabilized hypobromite was greater than that of chloramine when evaluated with intact bacterial counts, which suggests its potential for mitigating membrane biofouling. Additional pilot-scale tests using synthetic wastewater demonstrated that pre-disinfection with the use of stabilized hypobromite inhibits membrane fouling. Among 13 halogenated DBPs evaluated, the formation of bromoform by stabilized hypobromite was higher than that by chloramine at a high dose of 10â¯mg/L, thus suggesting the need for optimizing chemical doses for achieving sufficient biofouling mitigation. NDMA formation upon stabilized hypobromite treatment in two different types of actual treated wastewaters was found to be negligible and considerably lower than that by chloramine treatment. In addition, NDMA formation potential by stabilized hypobromite was 2-5 orders of magnitude lower than that by chloramine. Our findings suggest the potential of using stabilized hypobromite for controlling NDMA formation and biofouling, which are the keys to successful potable water reuse.
Asunto(s)
Dimetilnitrosamina/química , Desinfectantes/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Cloraminas , Dimetilnitrosamina/análisis , Desinfectantes/análisis , Desinfección , Agua Potable , Filtración , Halogenación , Trihalometanos , Aguas Residuales , Contaminantes Químicos del Agua/análisisRESUMEN
The efficacy of a baffled osmotic membrane bioreactor-microfiltration (OMBR-MF) hybrid system equipped with thin film forward osmosis membrane for wastewater treatment was evaluated at laboratory scale. The novel OMBR-MF hybrid system involved baffles, that separate oxic and anoxic zones in the aerobic reactor for simultaneous nitrification and denitrification (SND), and a bioreactor comprised of thin film composite-forward osmosis (TFC-FO) and polyether sulfone-microfiltration (PES-MF) membranes. The evaluation was conducted under four different oxic-anoxic cycle patterns. Changes in flux, salinity build-up, and microbial activity (e.g., extracellular polymeric substances (EPS) were assessed. Over the course of a 34â¯d test, the OMBR-MF hybrid system achieved high removal of total organic carbon (TOC) (86-92%), total nitrogen (TN) (63-76%), and PO4-P (57-63%). The oxic-anoxic cycle time of 0.5-1.5â¯h was identified to be the best operating condition. Incorporation of MF membrane effectively alleviated salinity build-up in the reactor, allowing stable system operation.
Asunto(s)
Aguas Residuales , Purificación del Agua , Reactores Biológicos , Desnitrificación , Membranas Artificiales , Nitrificación , Nitrógeno , ÓsmosisRESUMEN
Public confidence in the safety of recycled water for potable water reuse can be improved by providing assurance regarding high removal of trace organic chemicals (TOrCs) by reverse osmosis (RO) treatment. This pilot-scale study assessed the effectiveness of a surrogate indicator-N-Nitrosodimethlyamine (NDMA)-for ensuring a high level of TOrC removal by a high-rejection RO membrane. The pilot-scale tests showed that the rejection of 23 TOrCs by the high-rejection RO membrane was consistently greater than NDMA rejection. In addition, NDMA rejection was highly correlated with TOrC rejection across varied operating conditions, indicating that NDMA can be used as a conservative surrogate indicator for TOrC removal. The RO treatment at a permeate flux of 20â¯L/m2â¯h and feed temperature of 13-27⯰C resulted in as high as 75-87% NDMA rejection, which was considerably greater than a conventional low-pressure RO membrane (26-47%). However, the high-rejection RO membrane required a transmembrane pressure that was greater than that of the low-pressure RO membrane. Despite this disadvantage, this study suggests that the high-rejection RO membrane can effectively ensure a high level of TOrC removal (≥65%) when NDMA is used as a surrogate indicator, which cannot be ensured by assessing conventional conductivity rejection.
RESUMEN
Microbiological risks associated with drinking water can be minimized by providing enhanced integrity monitoring of bacterial removal by water treatment processes. This study aimed to evaluate the efficacy of real-time bacteriological counters for continuously assessing the performance of a full-scale sand filter to remove bacteria. Over the course of an 8-day evaluation, online counting of bacteria was successfully performed, providing continuous bacterial counts in the sand filter influent and effluent over approximate ranges from 17â¯×â¯104 to 94â¯×â¯104 and from 0.2â¯×â¯104 to 1.3â¯×â¯104 counts/mL, respectively. Periodic variations were observed with online bacterial counts in the sand filter influent because of the changes in the performance of flocculation and sedimentation processes. Overall, online removal rates of bacteria determined during the full-scale test were 95.2-99.3% (i.e., 1.3-2.2-log), indicating that online bacterial counting can continuously demonstrate over 1.3-log removal in the sand filter. Real-time bacteriological counting technology can be a useful tool for assessing variability and detecting bacterial breakthrough. It can be integrated with other online water quality measurements to evaluate underlying trends and the performance of sand filters for bacterial removal, which can enhance the safety of drinking water.
Asunto(s)
Técnicas Bacteriológicas/métodos , Agua Potable/microbiología , Purificación del Agua/métodos , Filtración/instrumentación , Filtración/métodos , Japón , Sistemas en Línea , Dióxido de Silicio , Purificación del Agua/instrumentaciónRESUMEN
Safety of potable reuse can be enhanced by improved water quality monitoring techniques for assessing water treatment processes. This study evaluated the efficacy of online bacterial counting for continuous monitoring of reverse osmosis (RO) membranes to remove bacteria using real-time bacteriological commercial counters and an on-site pilot-scale RO system. Prior to on-site assessments, the online bacterial counting was verified by comparing the measurement of fluorescent particles in water with flow cytometry. During a seven day pilot test of RO treatment at a water reclamation plant, online bacterial counts in RO permeate were monitored below 15 counts/mL; whereas the bacterial counts in RO feed water were approximately 2500 to 10,000 counts/mL. Removal rates of bacterial counts ranged from 2.6 to 3.1-log (averageâ¯=â¯2.9-log) by continuously monitoring bacterial removal. This is greater than a 2-log reduction frequently determined using other water quality surrogates (i.e., electrical conductivity). Overall, the continuous monitoring of bacteria in RO feed and permeate can be implemented without the addition of chemicals to provide near real-time bacterial counts to measure their reduction after RO treatment. This can be developed for continuous performance monitoring of the RO process, providing greater assurance of microbial water quality after RO treatment.
Asunto(s)
Eliminación de Residuos Líquidos/métodos , Microbiología del Agua , Filtración , Membranas Artificiales , Ósmosis , Purificación del Agua/métodos , Calidad del AguaRESUMEN
This study aimed to evaluate treatment performance and membrane fouling of a lab-scale Sponge-MBR under the added ciprofloxacin (CIP) dosages (20; 50; 100 and 200⯵gâ¯L-1) treating hospital wastewater. The results showed that Sponge-MBR exhibited effective removal of COD (94-98%) during the operation period despite increment of CIP concentrations from 20 to 200⯵gâ¯L-1. The applied CIP dosage of 200⯵gâ¯L-1 caused an inhibition of microorganisms in sponges, i.e. significant reduction of the attached biomass and a decrease in the size of suspended flocs. Moreover, this led to deteriorating the denitrification rate to 3-12% compared to 35% at the other lower CIP dosages. Importantly, Sponge-MBR reinforced the stability of CIP removal at various added CIP dosages (permeate of below 13⯵gâ¯L-1). Additionally, the fouling rate at CIP dosage of 200⯵gâ¯L-1 was 30.6 times lower compared to the control condition (no added CIP dosage).
Asunto(s)
Reactores Biológicos , Ciprofloxacina/farmacología , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/química , Biomasa , HospitalesRESUMEN
Lorazepam is a benzodiazepine derivative that is globally used for the therapy of anxiety and insomnia. A 51-year-old Japanese man with yellowish discoloration of the eyes and skin and pruritus was admitted due to liver dysfunction. He had taken lorazepam approximately 5 months prior to this admission. The clinical presentation and pathologic findings in the liver were consistent with drug-induced liver injury. After cessation of lorazepam, treatment with Stronger neo-minophagen C and ursodeoxycholic acid was started, and his liver injury resolved after 59 days. This case must serve as a warning to physicians to be aware of the possibility of unexpected liver injury caused by lorazepam.
RESUMEN
Pre-concentration is essential for energy and resource recovery from municipal wastewater. The potential of forward osmosis (FO) membranes to pre-concentrate wastewater for subsequent biogas production has been demonstrated, although biofouling has also emerged as a prominent challenge. This study, using a cellulose triacetate FO membrane, shows that chloramination of wastewater in the feed solution at 3â»8 mg/L residual monochloramine significantly reduces membrane biofouling. During a 96-h pre-concentration, flux in the chloraminated FO system decreased by only 6% and this flux decline is mostly attributed to the increase in salinity (or osmotic pressure) of the feed due to pre-concentration. In contrast, flux in the non-chloraminated FO system dropped by 35% under the same experimental conditions. When the feed was chloraminated, the number of bacterial particles deposited on the membrane surface was significantly lower compared to a non-chloraminated wastewater feed. This study demonstrated, for the first time, the potential of chloramination to inhibit bacteria growth and consequently biofouling during pre-concentration of wastewater using a FO membrane.
Asunto(s)
Incrustaciones Biológicas/prevención & control , Cloraminas/química , Filtración/métodos , Ósmosis , Aguas Residuales/química , Purificación del Agua/métodos , Concentración de Iones de Hidrógeno , Japón , Membranas ArtificialesRESUMEN
A 4-year-old, 5.9-kg female Japanese Spitz presented with syncope and exercise intolerance. Echocardiography revealed an ostium primum atrial septal defect (ASD), a cleft mitral valve, mitral valve regurgitation (MR), and tricuspid regurgitation (TR) (velocity: 3.6 m/sec, pressure gradient: 52 mmHg), leading to a diagnosis of partial atrioventricular septal defect (AVSD) with moderate pulmonary hypertension (PH). Open-heart surgery using cardiopulmonary bypass was performed through right atriotomy. The cleft of the mitral valve was sutured with polypropylene and the AVSD was closed using an autologous pericardial patch fixed with glutaraldehyde. No postoperative pulmonary hypertensive crisis occurred. Shunting flow through the ASD, TR and PH had completely disappeared 2 months postoperatively; however, moderate MR persisted. The dog is still alive 5 years postoperatively without clinical signs.
Asunto(s)
Enfermedades de los Perros/cirugía , Defectos del Tabique Interatrial/veterinaria , Hipertensión Pulmonar/veterinaria , Animales , Perros , Femenino , Defectos del Tabique Interatrial/cirugía , Defectos del Tabique Interventricular , Hipertensión Pulmonar/cirugía , Resultado del TratamientoRESUMEN
A new membrane fouling control technique using ozonated water flushing was evaluated for direct nanofiltration (NF) of secondary wastewater effluent using a ceramic NF membrane. Experiments were conducted at a permeate flux of 44 L/m²h to evaluate the ozonated water flushing technique for fouling mitigation. Surface flushing with clean water did not effectively remove foulants from the NF membrane. In contrast, surface flushing with ozonated water (4 mg/L dissolved ozone) could effectively remove most foulants to restore the membrane permeability. This surface flushing technique using ozonated water was able to limit the progression of fouling to 35% in transmembrane pressure increase over five filtration cycles. Results from this study also heighten the need for further development of ceramic NF membrane to ensure adequate removal of pharmaceuticals and personal care products (PPCPs) for water recycling applications. The ceramic NF membrane used in this study showed approximately 40% TOC rejection, and the rejection of PPCPs was generally low and highly variable. It is expected that the fouling mitigation technique developed here is even more important for ceramic NF membranes with smaller pore size and thus better PPCP rejection.