RESUMEN
Coupling effects of localized surface plasmon resonance (LSPR) represent an efficient means to tune the plasmonic modes and to enhance the near-field. While LSPR coupling in metal nanoparticles has been extensively explored, limited attention has been given to heavily doped semiconductor nanocrystals. Here, we investigate the LSPR coupling behavior of Cs-doped tungsten oxide (CsxWO3-δ) nanocrystal platelets as they undergo an oriented assembly into parallel stacks. The oriented assembly was achieved by lowering the dispersion stability of the colloidal nanoplatelets, of which the basal surface was selectively ligand-functionalized. This assembly induces simultaneous blue-shifts and red-shifts of dual-mode LSPR peaks without compromising the intensity and quality factor. This stands in contrast to the significant damping, broadening, and overall red-shift of the LSPR observed in random assemblies. Computational simulations successfully replicate the experimental observations, affirming the potential of this coupling phenomenon of near-infrared dual-mode LSPR in diverse applications including solar energy, bio-optics, imaging, and telecommunications.
RESUMEN
Concentrated colloidal suspensions of nanorods often exhibit liquid-crystalline (LC) behavior. The transition to a nematic LC phase, with long-range orientational order of the particles, is usually well-captured by Onsager's theory for hard rods, at least qualitatively. The theory shows how the volume fraction at the transition decreases with increasing aspect ratio of the rods. It also explains that the long-range electrostatic repulsive interaction occurring between rods stabilized by their surface charge can significantly increase their effective diameter, resulting in a decrease in the volume fraction at the transition, as compared to sterically stabilized rods. Here, we report on a system of ligand-stabilized LaPO4 nanorods, of aspect ratio ≈ 11, dispersed in apolar medium exhibiting the counter-intuitive observation that the onset of nematic self-assembly occurs at an extremely low volume fraction of ≈ 0.25%, which is lower than observed (≈ 3%) with the same particles when charged-stabilized in polar solvent. Furthermore, the nanorod volume fraction at the transition increases with increasing concentration of ligands, in a similar way as in polar media where increasing the ionic strength leads to surface charge screening. This peculiar system was investigated by dynamic light scattering, Fourier-transform infrared spectroscopy, zetametry, electron microscopy, polarized light microscopy, photoluminescence measurements, and X-ray scattering. Based on these experimental data, we formulate several tentative scenarios that might explain this unexpected phase behavior. However, at this stage, its full understanding remains a pending theoretical challenge. Nevertheless, this study shows that dispersing anisotropic nanoparticles in an apolar solvent may sometimes lead to spontaneous ordering events that defy our intuitive ideas about colloidal systems.
RESUMEN
The accurate in-field titration of multiple pathogens is essential to efficiently describe and monitor environmental or biological contamination, isolate, act, and treat adequately. This underscores the requirement of portable, fast, quantitative, and multiplexed detection technologies, which, however, have not been properly developed so far, notably because it has been hindered by the phenomenon of cross-reactivity. In this work, we proposed a new analytical method based on the imaging through a portable device of lanthanide-based nanoparticles (YVO4:Eu) for spatially multiplexed detection, relying on a multiparameter analysis, i.e., a simultaneous analysis of all of the luminescence signals through the comparison to a calibration surface built in the presence of multiple analytes of interest. We then demonstrated the possibility to simultaneously quantify by multiplexed lateral flow assay (xLFA) the three enterotoxins SEG, SEH, and SEI in unknown mixtures, over two concentration decades (from a dozen of pg·mL-1 to few ng·mL-1). Assays were performed in less than an hour (25 min of strip migration followed by 30 min of drying at room temperature), the time during which the presence of the operator was not required for more than 5 min, in order to dip the strip and have it imaged by the reader. The concepts of nominal concentration recovery, coefficient of variation (CV), limit of blank (LOB), and limit of detection (LOD) were discussed in detail in the context of multiplexed assays. With our new definitions, quantitative results demonstrated a high recovery of the nominal concentrations (115%), reliability (CV = 20%), and sensitivity (LOBs of 3, 27, and 6 pg·mL-1 for SEG, SEH, and SEI respectively, and LODs of 6, 48, and 11 pg·mL-1 for SEG, SEH, and SEI, respectively). Based on this method, we observed an increase in sensitivity of 100 compared to the other multiplexed LFA labeled with gold particles and we approached the sensitivity of the simplex enzyme-linked immunosorbent assay (ELISA) performed with the same capture and detection antibodies. To conclude, our results, which are applicable to virtually any kind of multiplexed test, pave the way to the next generation of in-field analytical immunoassays by providing fast, quantitative, and highly sensitive multiplexed detection of biomarkers or pathogens.
Asunto(s)
Anticuerpos , Bioensayo , Reproducibilidad de los Resultados , Reacciones Cruzadas , CalibraciónRESUMEN
Cargo transport by molecular motors along microtubules is essential for the function of eukaryotic cells, in particular neurons in which axonal transport defects constitute the early pathological features of neurodegenerative diseases. Mainly studied in motor and sensory neurons, axonal transport is still difficult to characterize in neurons of the brain in absence of appropriate in vivo tools. Here, we measured fast axonal transport by tracing the second harmonic generation (SHG) signal of potassium titanyl phosphate (KTP) nanocrystals (nanoKTP) endocytosed by brain neurons of zebrafish (Zf) larvae. Thanks to the optical translucency of Zf larvae and to the perfect photostability of nanoKTP SHG, we achieved a high scanning speed of 20 frames (of ≈90 µm × 60 µm size) per second in Zf brain. We focused our study on endolysosomal vesicle transport in axons of known polarization, separately analyzing kinesin and dynein motor-driven displacements. To validate our assay, we used either loss-of-function mutations of dynein or kinesin 1 or the dynein inhibitor dynapyrazole and quantified several transport parameters. We successfully demonstrated that dynapyrazole reduces the nanoKTP mobile fraction and retrograde run length consistently, while the retrograde run length increased in kinesin 1 mutants. Taking advantage of nanoKTP SHG directional emission, we also quantified fluctuations of vesicle orientation. Thus, by combining endocytosis of nanocrystals having a nonlinear response, fast two-photon microscopy, and high-throughput analysis, we are able to finely monitor fast axonal transport in vivo in the brain of a vertebrate and reveal subtle axonal transport alterations. The high spatiotemporal resolution achieved in our model may be relevant to precisely investigate axonal transport impairment associated with disease models.
Asunto(s)
Dineínas , Cinesinas , Animales , Cinesinas/metabolismo , Dineínas/metabolismo , Pez Cebra/metabolismo , Transporte Axonal/genética , Microscopía , Larva/metabolismo , Axones , Microtúbulos/metabolismo , Encéfalo/metabolismoRESUMEN
Using multinuclear copper iodide complexes as cross-linking agents in a polyurethane matrix, original photoluminescent stimuli-responsive materials were synthesized. The intrinsic photoluminescence properties of the covalently incorporated copper iodide complexes are thus transferred to the materials while retaining the beneficial characteristics of the polymer host. The transparent materials exhibit room-temperature phosphorescence with emission switching properties by displaying luminescence thermochromism and solvatochromism. The luminescence thermochromism is characterized by a change in the wavelength and intensity of the emission with temperature, and the vapochromic effect presents a contrasted response of extinction or exaltation according to the nature of the solvent of exposure. By combining the luminescence characteristics of photoactive copper iodide complexes with the ease of polymer processing, the application of these luminescent materials as phosphors in LED (light-emitting diode) devices was also demonstrated. The present study shows that the use of copper iodide complexes as cross-linkers in polymeric materials is a relevant strategy to design materials with enhanced functionalities in addition to their low cost and sustainable characteristics.
RESUMEN
Dynamics with an orientational degree of freedom are fundamental in biological events. Probes with polarized luminescence enable a determination of the orientation. Lanthanide-doped nanocrystals can provide more precise analysis than quantum dots due to the nonphotoblinking/bleaching nature and the multiple line-shaped emission. However, the intrinsic polarization property of the original nanocrystals often deteriorates in complex physiological environments because the colloidal stability easily breaks and the probes aggregate in the media with abundant salts and macromolecules. Engineering the surface chemistry of the probes is thus essential to be compatible with biosystems, which has remained a challenging task that should be exclusively addressed for each specific probe. Here, we demonstrate a facile and efficient surface functionalization of lanthanide-doped nanorods by zwitterionic block copolymers. Due to the steric interaction and the intrinsic zwitterionic nature of the polymers, high colloidal stability of the zwitterionic nanorod suspension is achieved over wide ranges of pH and concentration of salts, even giving rise to the lyotropic liquid crystalline behavior of the nanorods in physiological media. The shear-aligned ability is shown to be unaltered by the coated polymers, and thus, the strongly polarized emission of Eu3+ is preserved. Besides, biological experiments reveal good biocompatibility of the zwitterionic nanorods with negligible nonspecific binding. This study is a stepping stone for the use of the nanorods as orientation probes in biofluids and validates the strategy of coupling zwitterions to lanthanide-doped nanocrystals for various bioapplications.
Asunto(s)
Técnicas Biosensibles , Elementos de la Serie de los Lantanoides , Puntos Cuánticos , Elementos de la Serie de los Lantanoides/química , Polímeros , Puntos Cuánticos/química , Sales (Química)RESUMEN
We use europium doped single crystalline NaYF4nanorods for probing the electric and magnetic contributions to the local density of optical states (LDOS). Reciprocically, we determine intrinsic properties of the emitters (oscillator strength, quantum yield) by comparing their measured and simulated optical responses in front of a mirror. We first experimentally determine the specifications of the nanoprobe (orientation and oscillator strength of the electric and magnetic dipoles moments) and show significant orientation sensitivity of the branching ratios associated with electric and magnetic transitions. In a second part, we measure the modification of the LDOS in front of a gold mirror in a Drexhage's experiment. We discuss the role of the electric and magnetic LDOS on the basis of numerical simulations, taking into account the orientation of the dipolar emitters. We demonstrate that they behave like degenerated dipoles sensitive to polarized partial LDOS.
RESUMEN
Intense research on nanocrystals synthesized in solution is motivated by their original physical properties, which are determined by their sizes and shapes on various scales. However, morphology control on the nanoscale is limited by our understanding of crystallization, which is challenged by the now well-established prevalence of noncrystalline intermediates. In particular, the impact of such intermediates on the final sizes and crystal quality remains unclear because the characterization of their evolution on the nanometer and millisecond scales with nonperturbative analyses has remained a challenge. Here we use in situ X-ray scattering to show that the nucleation and growth of YVO4:Eu nanocrystals is spatially restrained within amorphous, nanometer-scaled intermediates. The reactivity and size of these amorphous intermediates determine (i) the mono versus polycrystalline character of final crystals and (ii) the size of final crystals. This implies that designing amorphous intermediates themselves that form in <6 ms is one of the keys to controlled bottom-up syntheses of optimized nanoparticles.
Asunto(s)
Nanopartículas , Cristalización , Nanopartículas/químicaRESUMEN
Orientation analyses of macromolecules or artificial particles are vital for both fundamental research and practical bio-applications. An accurate approach is monitoring the polarization spectroscopy of lanthanide-doped nanocrystalline materials. However, nanomaterials are often far from ideal for the colloidal and polarization luminescence properties. In the present study, we synthesize well-dispersed LaPO4:Eu3+ nanomaterials in an anisotropic rod shape. Microwave heating with excess addition of phosphate precursor invokes a rapid phase transition of rhabdophane into monazite. The colloidal stability of the nanorod suspension is outstanding, demonstrated by showing liquid crystalline behaviors. The monazite nanorods are also superior in luminescence efficiency with limited defects. The emission spectrum of Eu3+ consists of well-defined lines with prominent polarization dependencies for both the forced electric dipole transitions and the magnetic dipole transitions. All the results demonstrate that the synthesized monazite nanorods can serve as an accurate probe in orientation analyses and potential applications, such as in microfluidics and biological detections.
RESUMEN
Vertically aligned nanorod assemblies are of great interest both for fundamental studies of anisotropic physical properties arising from the structures and for the development of functional devices utilizing such anisotropic characteristics. Simultaneous measurement of the homeotropic order parameter (Shomeo) of assemblies in dynamic states can allow further optimization of the assembly process and the device performance. Although many techniques (e.g. birefringence measurement, SAXS analysis, and high-resolution microscopy) have been proposed to characterise Shomeo, these do not yet meet the essential criteria such as for rapid, in situ and non-destructive analyses. Here, we propose a novel approach employing a unique photoluminescence behaviour of lanthanide-doped crystalline nanorods, of which the emission spectrum contains the detailed information on the structure of the assembly. We demonstrate a rapid in situ determination of Shomeo of Eu3+-doped NaYF4 nanorods of which the orientation is controlled under an external electric field. The method does not require the consideration of polarization and can be performed using a conventional fluorescence microscopy setup. This new methodology would provide a more in-depth examination of various assembled nanostructures and the collective dynamics of their building blocks.
RESUMEN
Orientation of nanoscale objects can be measured by examining the polarized emission of optical probes. To retrieve a three-dimensional (3D) orientation, it has been essential to observe the probe (a dipole) along multiple viewing angles and scan with a rotating analyzer. However, this method requires a sophisticated optical setup and is subject to various external sources of error. Here, we present a fundamentally different approach employing coupled multiple emission dipoles that are inherent in lanthanide-doped phosphors. Simultaneous observation of different dipoles and comparison of their relative intensities allow to determine the 3D orientation from a single viewing angle. Moreover, the distinct natures of electric and magnetic dipoles originating in lanthanide luminescence enable an instant orientation analysis with a single-shot emission spectrum. We demonstrate a straightforward orientation analysis of Eu3+-doped NaYF4 nanocrystals using a conventional fluorescence microscope. Direct imaging of the rod-shaped nanocrystals proved the high accuracy of the measurement. This methodology would provide insights into the mechanical behaviors of various nano- and biomolecular systems.
RESUMEN
Two-photon light-sheet microscopy (2P-SPIM) provides a unique combination of advantages for fast and deep fluorescence imaging in live tissues. Detecting coherent signals such as second-harmonic generation (SHG) in 2P-SPIM in addition to fluorescence would open further imaging opportunities. However, light-sheet microscopy involves an orthogonal configuration of illumination and detection that questions the ability to detect coherent signals. Indeed, coherent scattering from micron-sized structures occurs predominantly along the illumination beam. By contrast, point-like sources such as SHG nanocrystals can efficiently scatter light in multiple directions and be detected using the orthogonal geometry of a light-sheet microscope. This study investigates the suitability of SHG light-sheet microscopy (SHG-SPIM) for fast imaging of SHG nanoprobes. Parameters that govern the detection efficiency of KTiOPO4 and BaTiO3 nanocrystals using SHG-SPIM are investigated theoretically and experimentally. The effects of incident polarization, detection numerical aperture, nanocrystal rotational motion, and second-order susceptibility tensor symmetries on the detectability of SHG nanoprobes in this specific geometry are clarified. Guidelines for optimizing SHG-SPIM imaging are established, enabling fast in vivo light-sheet imaging combining SHG and two-photon excited fluorescence. Finally, microangiography was achieved in live zebrafish embryos by SHG imaging at up to 180 frames per second and single-particle tracking of SHG nanoprobes in the blood flow.
RESUMEN
The past few decades have seen the development of new bone cancer therapies, triggered by the discovery of new biomaterials. When the tumoral area is small and accessible, the common clinical treatment implies the tumor mass removal followed by bone reconstruction or consolidation with a bioceramic or a metallic scaffold. Even though the treatment also involves chemotherapy or radiotherapy, resurgence of cancer cells remains possible. We have thus designed a new kind of heterostructured nanobiomaterial, composed of SiO2-CaO bioactive glass as the shell and superparamagnetic γ-Fe2O3 iron oxide as the core in order to combine the benefits of bone repair thanks to the glass bioactivity and cancer cell destruction through magnetic hyperthermia. These multifunctional core-shell nanoparticles (NPs) have been obtained using a two-stage procedure, involving the coprecipitation of 11 nm sized iron oxide NPs followed by their encapsulation inside a bioactive glass shell by sol-gel chemistry. The as-produced spherical multicore-shell NPs show a narrow size distribution of 73 ± 7 nm. Magnetothermal loss measurements by calorimetry under an alternating magnetic field and in vitro bioactivity assessment performed in simulated body fluid showed that these heterostructures exhibit a good heating capacity and a fast mineralization process (hydroxyapatite forming ability). In addition, their in vitro cytocompatibility, evaluated in the presence of human mesenchymal stem cells during 3 and 7 days, has been demonstrated. These first findings suggest that γ-Fe2O3@SiO2-CaO heterostructures are a promising biomaterial to fill bone defects resulting from bone tumor resection, as they have the ability to both repair bone tissue and act as thermoseeds for cancer therapy.
Asunto(s)
Antineoplásicos/uso terapéutico , Materiales Biocompatibles/uso terapéutico , Neoplasias Óseas/tratamiento farmacológico , Células Madre Mesenquimatosas/efectos de los fármacos , Nanopartículas/química , Antineoplásicos/química , Materiales Biocompatibles/química , Compuestos de Calcio/química , Células Cultivadas , Óxido Ferrosoférrico/química , Humanos , Óxidos/química , Tamaño de la Partícula , Dióxido de Silicio/química , Propiedades de SuperficieRESUMEN
Rare-earth-doped oxides are a class of compounds that have been largely studied in the context of the development of luminescent nanocrystals for various applications including fluorescent labels for bioimaging, MRI contrast agents, luminescent nanocomposite coatings, etc. Elaboration of colloidal suspensions is usually achieved through coprecipitation. Particles exhibit emission properties that are similar to the bulk counterparts, although altered by crystalline defects or surface quenching species. Focusing on YVO4:Eu, one of the first reported systems, the aim of this work is to revisit the elaboration of nanoparticles obtained through a simple aqueous coprecipitation route. The objective is more precisely to get a better understanding of the parameters affecting the particles' internal microstructure, a feature that is poorly controlled and characterized. We show that the hydroxyl concentration in the precursor solution has a drastic effect on the particles' microstructure. Moreover, discrepancies in the reported particle structure are shown to possibly arise from the carbonation of the strongly basic orthovanadate precursor. For this study, SAXS/WAXS is shown to be a powerful tool to characterize the multiscale structure of the particles. It could be shown that playing on the precursor composition, it may be varied between almost monocrystalline nanocrystals to particles exhibiting a hierarchical microstructure well described by a surface fractal model. This work provides a new methodology for the characterization of nanoparticles microstructure and opens new directions for its optimization in view of applications.
RESUMEN
Lanthanide-doped nanoparticles are widely investigated for their optical properties. However, the sensitivity of the lanthanide ions' luminescence to the local symmetry, useful when investigating structural environments, becomes a drawback for optimized properties in the case of poorly controlled crystallinity. In this paper, we focus on ß -NaYF4 nanorods in order to provide a detailed description of their chemical composition and microstructure. The combination of detailed XRD analysis and TEM observations show that strong variation may be observed from particles from a same batch of synthesis, but also when considering small variations of synthesis conditions. Moreover, also the nanorods observed by SEM exhibit a very nice faceted shape, they are far from being monocrystalline and present significant local deviation of crystalline symmetry and orientation. All these structural considerations, sensitively probed by polarized emission analysis, are crucial to analyze for the development of optimal systems toward the targeted applications.
RESUMEN
The development of luminescent mechanochromic materials depends mainly on the possibility to rationally design them with the desired properties. Molecular copper iodide clusters constitute an unprecedented family of compounds exhibiting great changes of their luminescence properties upon mechanical stress. From previous studies, the mechanochromic properties of cubane [Cu4I4L4] (L = organic ligand) clusters have been attributed to modifications of cuprophilic interactions induced by mechanical solicitation. In this study, we ascertain our hypothesis by choosing to study the luminescence mechanochromism of a [Cu4I4(PPh3)4] cluster which presents two crystalline polymorphs exhibiting strikingly different Cu-Cu bond lengths. As forecasted, only one of these two polymorphs exhibits mechanochromic properties. Structural and optical characterization methods are reported along with structural characterization under controlled pressure allowing a precise analysis of the structural changes occurring under mechanical stress. In addition to confirming our mechanism based on enhancement of cuprophilic interactions under pressure, this study demonstrates the possibility of prediction of mechanochromic properties in the family of copper iodide compounds that constitutes a step further toward the rational design of stimuli-responsive materials.
RESUMEN
A copper iodide complex coordinated by three phosphine ligands with the formula [Cu2 I2 (Ph2 PC2 (C6 H4 )C2 PPh2 )3 ] exhibits solvatochromic and vapochromic luminescence properties. A mechanism based on solvent-dependent molecular motion appears to occur. The highly contrasted response observed upon THF solvent exposure makes this complex an appealing candidate for chemical sensor applications.
RESUMEN
Heterostructures based on Prussian blue analogues (PBA) combining photo- and magneto-striction have shown a large potential for the development of light-induced magnetization switching. However, studies of the microscopic parameters that control the transfer of the mechanical stresses across the interface and their propagation in the magnetic material are still too scarce to efficiently improve the elastic coupling. Here, this coupling strength is tentatively controlled by strain engineering in heteroepitaxial PBA core-shell heterostructures involving the same Rb0.5Co[Fe(CN)6]0.8·zH2O photostrictive core and isostructural shells of similar thickness and variable mismatch with the core lattice. The shell deformation and the optical electron transfer at the origin of photostriction are monitored by combined in situ and real time synchrotron X-ray powder diffraction and X-ray absorption spectroscopy under visible light irradiation. These experiments show that rather large strains, up to +0.9%, are developed within the shell in response to the tensile stresses associated with the expansion of the core lattice upon illumination. The shell behavior is, however, complex, with contributions in dilatation, in compression or unchanged. We show that a tailored photo-response in terms of strain amplitude and kinetics with potential applications for a magnetic manipulation using light requires a trade-off between the quality of the interface (which needs a small lattice mismatch i.e. a small a-cubic parameter for the shell) and the shell rigidity (decreased for a large a-parameter). A shell with a high compressibility that is further increased by the presence of misfit dislocations will show a decrease in its mechanical retroaction on the photo-switching properties of the core particles.
RESUMEN
The fabrication of arrays of silicon nanowires (Si NWs) with well-defined surface coverage using the vapor-liquid-solid process requires a good control of the density and size distribution for the metal catalyst. We report on a cost-effective bottom-up approach to produce Si NWs by a low-temperature deposition technology using plasma-enhanced chemical vapor deposition and tin dioxide (SnO2) nanoparticles as the source of tin catalyst. This strategy offers a straightforward method to select specific particle sizes by conventional colloidal techniques, and to tune the surface coverage using a polyelectrolyte layer to efficiently immobilize the particles on the substrate by electrostatic grafting. After a further step of reduction into tin metal droplets using hydrogen plasma treatment, the catalyst particles are used for the growth of Si NWs. This approach allows the prodcution of controlled Si NWs arrays which can be used as a template for radial junction thin film solar cells.
RESUMEN
Lanthanide elements exhibit highly appealing spectroscopic properties that are extensively used for phosphor applications. Their luminescence contains precise information on the internal structure of the host materials. Especially, the polarization behavior of the transition sublevel peaks is a fingerprint of the crystal phase, symmetry, and defects. However, this unique feature is poorly explored in current research on lanthanide nanophosphors. We here report on a detailed investigation of the evolution of Eu3+ luminescence during the thermally induced phase transition of LaPO4 nanocrystal hosts. By means of c-axis-aligned nanocrystal assemblies, we demonstrate a dramatic change of the emission polarization feature corresponding to the distinct Eu3+ site symmetries in different LaPO4 polymorphs. We also show that changes of the nanocrystal structure can be identified by this spectroscopic method, with a much higher sensitivity than the X-ray diffraction analysis. This new insight into the nanostructure-luminescence relationship, associated with the unprecedented polarization characterizations, provides a new methodology to investigate phase transitions in nanomaterials. It also suggests a novel function of lanthanide emitters as orientation-sensing nanoprobes for innovative applications such as in bioimaging or microfluidics.