A review of the risks of long-term consequences associated with components of the CHOP chemotherapy regimen.

A common chemotherapy regimen in post-transplant lymphoproliferative disease (PTLD) following solid organ transplants (SOT) is cyclophosphamide, doxorubicin, vincristine, and prednisone (CHOP). This study reviews the quantitative evidence for long-term consequences associated with components of CHOP identified from the Children's Oncology Group Long-Term Follow-Up Guidelines. Cited references were screened using prespecified criteria (English, systematic review, randomized controlled trial n > 100, observation study n > 100, case series n > 20). Relevant data were extracted and synthesized. Of 61 studies, 66% were retrospective cohort studies, 28% were in the US, and 95% enrolled pediatric patients. No study focused specifically on the CHOP regimen. Long-term consequences for CHOP components observed in >3 studies included cardiac toxicity (n = 14), hormone deficiencies/infertility (n = 14), secondary leukemia (n = 7), osteonecrosis (n = 6), and bladder cancer (n = 4). These effects are significant, impact a high percentage of patients, and occur as early as one year after treatment. Although none of the studies focused specifically on the CHOP regimen, 30%, 23%, and 15% evaluated alkylating agents (e.g. cyclophosphamide), anthracyclines (e.g. doxorubicin), and corticosteroids (e.g. prednisone), respectively. All three product classes had a dose-dependent risk of long-term consequences with up to 13.2-fold, 27-fold, 16-fold, 14.5-fold, and 6.2-fold increase in risk of heart failure, early menopause, secondary leukemia, bladder cancer, and osteonecrosis, respectively. Lymphoma patients had significantly elevated risks of cardiac toxicity (up to 12.2-fold), ovarian failure (up to 3.8-fold), and osteonecrosis (up to 6.7-fold). No studies were found in PTLD or SOT. Safe and effective PTLD treatments that potentially avoid these long-term consequences are urgently needed.

Kinematic Analysis of Five Different Anterior Cruciate Ligament Reconstruction Techniques.

Several anatomical anterior cruciate ligament (ACL) reconstruction techniques have been proposed to restore normal joint kinematics. However, the relative superiorities of these techniques with one another and traditional single-bundle reconstructions are unclear. Kinematic responses of five previously reported reconstruction techniques (single-bundle reconstruction using a bone-patellar tendon-bone graft [SBR-BPTB], single-bundle reconstruction using a hamstring tendon graft [SBR-HST], single-tunnel double-bundle reconstruction using a hamstring tendon graft [STDBR-HST], anatomical single-tunnel reconstruction using a hamstring tendon graft [ASTR-HST], and a double-tunnel double-bundle reconstruction using a hamstring tendon graft [DBR-HST]) were systematically analyzed. The knee kinematics were determined under anterior tibial load (134 N) and simulated quadriceps load (400 N) at 0°, 15°, 30°, 60°, and 90° of flexion using a robotic testing system. Anterior joint stability under anterior tibial load was qualified as normal for ASTR-HST and DBR-HST and nearly normal for SBR-BPTB, SBR-HST, and STDBR-HST as per the International Knee Documentation Committee knee examination form categorization. The analysis of this study also demonstrated that SBR-BPTB, STDBR-HST, ASTR-HST, and DBR-HST restored the anterior joint stability to normal condition while the SBR-HST resulted in a nearly normal anterior joint stability under the action of simulated quadriceps load. The medial-lateral translations were restored to normal level by all the reconstructions. The internal tibial rotations under the simulated muscle load were over-constrained by all the reconstruction techniques, and more so by the DBR-HST. All five ACL reconstruction techniques could provide either normal or nearly normal anterior joint stability; however, the techniques over-constrained internal tibial rotation under the simulated quadriceps load.

Effect of increased iliotibial band load on tibiofemoral kinematics and force distributions: a direct measurement in cadaveric knees.

STUDY DESIGN: Controlled laboratory study using cadaveric knee specimens and a repeated-measures design. OBJECTIVES: To investigate the effect of increased iliotibial band load (assumed to represent increased tensor fascia latae and gluteus maximus strength) on tibiofemoral kinematics and force distribution on the tibiofemoral articulation. BACKGROUND: Owing to the difficulty in measuring in vivo joint loading, there is limited evidence on the direct relationship between increased iliotibial band load and force distribution in the tibiofemoral articulation. METHODS: Eight fresh-frozen cadaveric knee specimens were used in this study. A robotic testing system assessed tibiofemoral kinematics under 3 simulated loading conditions: (1) 300-N quadriceps load, 100-N hamstrings load, 0-N iliotibial band load; (2) 300-N quadriceps load, 100-N hamstrings load, 50-N iliotibial band load; and (3) 300-N quadriceps load, 100-N hamstrings load, 100-N iliotibial band load. The load distribution in the medial and lateral tibiofemoral articulation was also measured under these loading conditions by using piezoelectric pressure sensors. Data were collected and analyzed at full extension and at 5°, 10°, 15°, 20°, 25°, and 30° of knee flexion. RESULTS: The loads transmitted through the medial tibiofemoral articulation significantly decreased when the load on the iliotibial band was increased, with a concomitant significant increase in lateral tibiofemoral articulation load. Greater iliotibial band load also increased anterior tibial translation and valgus tibial rotation, and decreased the amount of internal tibial rotation and medial tibial translation. CONCLUSION: The present study demonstrated that an increase in iliotibial band load, when tested in a non-weight-bearing condition in a cadaveric model, can significantly decrease the loads transmitted through the medial tibiofemoral articulation.

A combined numerical and experimental technique for estimation of the forces and moments in the lumbar intervertebral disc.

Evaluation of the loads on lumbar intervertebral discs (IVD) is critically important since it is closely related to spine biomechanics, pathology and prosthesis design. Non-invasive estimation of the loads in the discs remains a challenge. In this study, we proposed a new technique to estimate in vivo loads in the IVD using a subject-specific finite element (FE) model of the disc and the kinematics of the disc endplates as input boundary conditions. The technique was validated by comparing the forces and moments in the discs calculated from the FE analyses to the in vitro experiment measurements of three corresponding lumbar discs. The results showed that the forces and moments could be estimated within an average error of 20%. Therefore, this technique can be a promising tool for non-invasive estimation of the loads in the discs and may be extended to be used on living subjects.

The relationship between femoral tunnels created by the transtibial, anteromedial portal, and outside-in techniques and the anterior cruciate ligament footprint.

BACKGROUND: Tunnels created for reconstruction of a torn anterior cruciate ligament (ACL) are critical determinants of joint stability and clinical outcomes. There is limited objective evidence on the ability of transtibial (TT), anteromedial (AM) portal, and outside-in (OI) operative techniques in creating anatomic tunnels. HYPOTHESIS: (1) Tibial tunnel-independent techniques can create tunnels more accurately at the anatomic ACL footprint center than the TT technique, and (2) femoral tunnel exit location of the OI and TT techniques on the lateral cortex will be significantly further away from the lateral epicondyle than the femoral tunnel exit location of the AM portal technique. STUDY DESIGN: Controlled laboratory study. METHODS: Eight cadaveric knee specimens with a mean age of 56 years were used in this study. A digitizing system was used to record points along the outlines of the ACL insertion area and apertures of tunnels created by the TT, AM portal, and OI techniques. The following parameters were measured from the digitized points: (1) amount of ACL, anteromedial bundle, and posterolateral bundle coverage by the tunnels; (2) relationship between the centers of the ACL and the tunnels; and (3) distance between the center of the femoral tunnel exit and the lateral epicondyle. All the recorded parameters were analyzed in 3-dimensional solid modeling software. RESULTS: The percentage of ACL footprint coverage achieved by all 3 surgical techniques was not significantly different from one another. However, larger femoral posterolateral bundle coverage was observed in tunnels created by the AM portal and OI techniques than in the TT tunnel. In terms of anteromedial bundle coverage, no significant differences were observed between the 3 techniques. On average, 27.1% ± 17.4% of the TT tunnel was outside the ACL footprint. This was significantly larger compared with 13.6% ± 15.7% with the AM portal technique (P = .01) and 10.8% ± 10.8% in the OI technique (P = .01). Centers of femoral tunnels created by the TT, AM portal, and OI techniques were located at a distance of 3.0 ± 1.5 mm, 2.1 ± 0.9 mm, and 1.5 ± 1.2 mm, respectively, from the ACL footprint center. The femoral tunnel exit location of the AM portal technique on the lateral femoral cortex was closer to the lateral epicondyle than the femoral tunnel exit location of the OI and TT techniques. CONCLUSION: Findings of this study indicate that a larger posterolateral bundle coverage is achieved by the AM portal and OI techniques than by the TT technique. Centers of the tunnels created by the AM portal and OI techniques were closer to the native ACL footprint center than the center of the TT technique tunnel. The incidence of a posterior femoral tunnel exit relative to the lateral epicondyle is higher in the AM portal technique than in the OI and TT techniques. CLINICAL RELEVANCE: For ACL reconstruction using soft tissue grafts, tibial tunnel-independent techniques can produce more anatomic tunnels than the TT technique.

Anteroposterior stability of the knee during the stance phase of gait after anterior cruciate ligament deficiency.

Quadriceps avoidance and higher flexion strategies have been assumed as effects of ACL deficiency on knee joint function during gait. However, the effect of ACL deficiency on anteroposterior stability of the knee during gait is not well defined. In this study, 10 patients with unilateral acute ACL ruptures and the contralateral side intact performed gait on a treadmill. Flexion angles and anteroposterior translation of the ACL injured and the intact controlateral knees were measured at every 10% of the stance phase of the gait (from heel strike to toe-off) using a combined MRI and dual fluoroscopic imaging system (DFIS). The data indicated that during the stance phase of the gait, the ACL-deficient knees showed higher flexion angles compared to the intact contralateral side, consistent with the assumption of a higher flexion gait strategy. However, the data also revealed that the ACL-deficient knees had higher anterior tibial translation compared to the intact contralateral side during the stance phase of the gait. The higher flexion gait strategy was not shown to correlate to a reduction of the anterior tibial translation in ACL deficient knees. These data may provide indications for conservative treatment or surgical reconstruction of the ACL injured knees in restoration of the knee kinematics during daily walking activities.

A composite athletic tape with hyperelastic material properties improves and maintains ankle support during exercise.

STUDY DESIGN: Controlled laboratory testing using a single-group, prospective, repeated-measures design. OBJECTIVES: To compare the material properties of a hyperelastic athletic tape to a conventional tape and to compare the passive ankle support of these tapes before and after exercise. BACKGROUND: The near-linear material properties of conventional athletic tape may interfere with ankle motion, resulting in reduced athletic performance. Conventional athletic tape is also known to lose much of its initial support during exercise. It was assumed that a tape constructed of Kevlar fibers embedded in a silicon matrix would possess hyperelastic material properties that would improve ankle support. METHODS: A tensile testing machine was used to determine the tensile material properties of 11 samples of conventional and hyperelastic tape. The ankles of 11 young, healthy athletes were taped, one ankle with conventional tape and the other ankle with hyperelastic tape. The passive ankle support of each tape was measured with an instrumented linkage (the ankle flexibility tester) before and after 30 minutes of exercise. RESULTS: The composite tape had a significantly higher load to failure than the conventional tape. It had significantly lower initial stiffness and higher late stiffness than conventional tape, thus demonstrating highly hyperelastic behavior. The hyperelastic tape maintained a significantly higher portion of its support during the 30 minutes of exercise than the conventional tape. CONCLUSIONS: Composite athletic tape with highly hyperelastic properties can be constructed and maintains a larger portion of its support during short-duration exercises (less than 30 minutes) than conventional athletic tape.

Biomechanical evaluation of knee joint laxities and graft forces after anterior cruciate ligament reconstruction by anteromedial portal, outside-in, and transtibial techniques.

BACKGROUND: Recently, anatomic anterior cruciate ligament (ACL) reconstruction is emphasized to improve joint laxity and to potentially avert initiation of cartilage degeneration. There is a paucity of information on the efficacy of ACL reconstructions by currently practiced tunnel creation techniques in restoring normal joint laxity. STUDY DESIGN: Controlled laboratory study. HYPOTHESIS: Anterior cruciate ligament reconstruction by the anteromedial (AM) portal technique, outside-in (OI) technique, and modified transtibial (TT) technique can equally restore the normal knee joint laxity and ACL forces. METHODS: Eight fresh-frozen human cadaveric knee specimens were tested using a robotic testing system under an anterior tibial load (134 N) at 0°, 30°, 60°, and 90° of flexion and combined torques (10-N·m valgus and 5-N·m internal tibial torques) at 0° and 30° of flexion. Knee joint kinematics, ACL, and ACL graft forces were measured in each knee specimen under 5 different conditions (ACL-intact knee, ACL-deficient knee, ACL-reconstructed knee by AM portal technique, ACL-reconstructed knee by OI technique, and ACL-reconstructed knee by TT technique). RESULTS: Under anterior tibial load, no significant difference was observed between the 3 reconstructions in terms of restoring anterior tibial translation (P > .05). However, none of the 3 ACL reconstruction techniques could completely restore the normal anterior tibial translations (P < .05). Under combined tibial torques, both AM portal and OI techniques closely restored the normal knee anterior tibial translation (P > .05) at 0° of flexion but could not do so at 30° of flexion (P < .05). The ACL reconstruction by the TT technique was unable to restore normal anterior tibial translations at both 0° and 30° of flexion under combined tibial torques (P < .05). Forces experienced by the ACL grafts in the 3 reconstruction techniques were lower than those experienced by normal ACL under both the loading conditions. CONCLUSION: Anterior cruciate ligament reconstructions by AM portal, OI, and modified TT techniques are biomechanically comparable with each other in restoring normal knee joint laxity and in situ ACL forces. CLINICAL RELEVANCE: Anterior cruciate ligament reconstructions by AM portal, OI, and modified TT techniques result in similar knee joint laxities. Technical perils and pearls should be carefully considered before choosing a tunnel creating technique.

In vitro and intraoperative laxities after single-bundle and double-bundle anterior cruciate ligament reconstructions.

PURPOSE: The purpose of this study was to objectively evaluate whether double-bundle anterior cruciate ligament (ACL) reconstruction can better restore the normal translational and rotational laxities than the conventional single-bundle ACL reconstruction among the reported biomechanical studies. METHODS: A systematic literature search was conducted to identify in vitro and in vivo (intraoperative) biomechanical studies that compared the laxities (anterior or anteroposterior or rotational) between single- and double-bundle ACL reconstructions. Because of large variability among the loading conditions and testing methods used to determine the rotational laxities among the studies, a meta-analysis of rotational laxities was not feasible. RESULTS: Seven in vitro and three in vivo studies were included in this analysis based on the predefined inclusion criteria. The overall mean differences calculated by the random effects model in anteroposterior laxity between the single-bundle and double-bundle ACL reconstruction techniques at 0°, 30°, 60°, and 90° of flexion were 0.99 mm, 0.38 mm, 0.34 mm, and 0.07 mm, respectively. No statistically significant difference was noted between the 2 treatments at all flexion angles. Among the 9 studies that compared the rotational laxity of single-bundle and double-bundle ACL reconstructions, 4 reported that double-bundle reconstruction can provide better rotational control than single-bundle reconstruction. The other 5 studies could not identify any significant difference between the 2 reconstructions in terms of rotational laxity. CONCLUSIONS: Both single- and double-bundle treatment options for ACL injury result in similar anteroposterior knee joint laxity at time 0. No conclusive evidence on the superiority of 1 reconstruction technique over the other in terms of rotation laxity can be obtained because of several variations in the experimental protocol and the kinematics used to measure the rotational laxity among the studies. LEVEL OF EVIDENCE: Level III, meta-analysis.

Do high flexion posterior stabilised total knee arthroplasty designs increase knee flexion? A meta analysis.

PURPOSE: This systematic literature review analysed the change in range of knee flexion from pre-operative values, following conventional posterior stabilised (PS) and high-flexion (H-F) PS total knee arthroplasty (TKA). METHODS: We calculated the weighted mean differences of pre- and postoperative flexion using meta-analysis with random effect modelling. Eighteen studies met our inclusion criteria. These data included a total of 2,104 PS knees that received conventional implants and 518 knees that received H-F implants. RESULTS: The pooled gain in flexion was 4.70° in the conventional group (p <0.0001) and 4.81° in the H-F group (p = 0.0008). In the subgroup analysis, the Western patient group showed significant difference in the gain of flexion with both implants. In contrast, no significant gain in flexion was observed in the Asian patient group. CONCLUSIONS: These results suggest that improvement of preoperative flexion after TKA using current H-F PS prostheses is similar to that of conventional PS prostheses.

In vivo length patterns of the medial collateral ligament during the stance phase of gait.

PURPOSE: The function of the medial collateral ligament (MCL) during gait has not been investigated. Our objective was to measure the kinematics of the medial collateral ligament during the stance phase of gait on a treadmill using a combined dual fluoroscopic imaging system (DFIS) and MRI technique. METHODS: Three-dimensional models of the knee were constructed using magnetic resonance images of 7 healthy human knees. The contours of insertion areas of the superficial MCL (sMCL) and deep MCL (dMCL) on the femur and tibia were constructed using the coronal plane MR images of each knee. Both the sMCL and the dMCL were separated into 3 portions: the anterior, mid, and posterior bundles. The relative elongation of the bundles was calculated using the bundle length at heel strike (or 0% of the stance phase) as a reference. RESULTS: The lengths of the anterior bundles were positively correlated with the knee flexion angle. The mid-bundles of the sMCL and dMCL were found to function similarly in trend with the anterior bundles during the stance phase of the gait and their lengths had weak correlations with the knee flexion angles. The elongations of the posterior bundles of sMCL and dMCL were peaked at mid-stance and terminal extension/pre-swing stance phase. The lengths of the posterior bundles were negatively correlated with the knee flexion during the stance phase. CONCLUSION: The data of this study demonstrated that the anterior and posterior bundles of the sMCL and dMCL have a reciprocal function during the stance phase of gait. This data provide insight into the function of the MCL and a normal reference for the study of physiology and pathology of the MCL. The data may be useful in designing reconstruction techniques to better reproduce the native biomechanical behavior of the MCL. LEVEL OF EVIDENCE: IV.

The effect of isolated popliteus tendon complex injury on graft force in anterior cruciate ligament reconstructed knees.

Failure to diagnose injury to the posterolateral structures has been found to increase the forces experienced by the anterior cruciate ligament (ACL) and ACL grafts which may cause their subsequent failure. An isolated injury to the popliteus complex (PC) consisting of the popliteus tendon and popliteofibular ligament is not uncommon. Therefore, the purpose of this study was to discover if an isolated injury to the PC can significantly affect the forces experienced by the ACL graft under external loading conditions. We hypothesised that, under external tibial torque, the ACL graft will experience a significant increase in force, in knees with PC injury compared to the intact PC condition. Under varus tibial torque (10 N m), we observed minimal changes in the varus tibial rotation due to isolated sectioning of the PC in an ACL reconstructed knee (P > 0.05). Consequently, no significant increase in the ACL graft force was observed under varus tibial torque. In contrast, sectioning the PC resulted in a significant increase in the external tibial rotation compared to the intact PC knee condition under the external rotational tibial torque (5 N m) at all flexion angles (P < 0.05). These changes in kinematics under external tibial torque were manifested as elevated ACL graft forces at all selected flexion angles (P < 0.05). Prompt diagnosis of isolated PC injury and its treatment are warranted to prevent potential failure of ACL reconstruction.

The effect of graft fixation sequence on force distribution in double-bundle anterior cruciate ligament reconstruction.

PURPOSE: This paper investigated the effect of graft fixation sequence on knee joint biomechanics after a double-bundle ACL reconstruction. METHOD: Two independently published biomechanical studies that investigated the biomechanics of double-bundle ACL reconstructions using similar robotic testing systems were compared. In each study, ten human cadaveric knees were tested under three different conditions: intact, ACL deficient, and ACL reconstructed using a double-bundle technique with the anteromedial (AM) graft fixed at 60° of flexion and the posterolateral (PL) graft fixed at full extension. In one study (Study A), the AM graft was fixed first; while in another study (Study B), the PL graft was fixed first. Knee kinematics, in situ forces of the ACL and the ACL grafts were measured under two loading conditions: an anterior tibial load of 134 N and a combined tibial torques (10 N·m valgus and 5 N·m internal tibial torques) in both studies. RESULT: When AM graft was fixed first, the in situ force of the AM graft was lower than the native AM bundle at all flexion angles. The in situ force in the PL graft, however, was higher than the native PL bundle at all flexion angles. When the PL graft was fixed first, the in situ force of the AM graft was higher than the native AM bundle, while the in situ forces of the PL graft were lower than the native PL bundle at all flexion angles. Both studies demonstrated that the double-bundle ACL reconstructions can closely restore the normal knee joint kinematics. CONCLUSION: Even though the grafts were fixed using similar initial tensions and at same flexion angles, the sequence of fixing the two grafts in a double-bundle ACL reconstruction could alter the in situ forces in the grafts and affect the knee kinematics. These data imply that in clinical application of a double-bundle ACL reconstruction, the sequence of graft fixation should be an important surgical parameter.

Morphology of the medial collateral ligament of the knee.

BACKGROUND: Quantitative knowledge on the anatomy of the medial collateral ligament (MCL) is important for treatment of MCL injury and for MCL release during total knee arthroplasty (TKA). The objective of this study was to quantitatively determine the morphology of the MCL of human knees. METHODS: 10 cadaveric human knees were dissected to investigate the MCL anatomy. The specimens were fixed in full extension and this position was maintained during the dissection and morphometric measurements. The outlines of the insertion sites of the superficial MCL (sMCL) and deep MCL (dMCL) were digitized using a 3D digitizing system. RESULTS: The insertion areas of the superficial MCL (sMCL) were 348.6 ± 42.8 mm2 and 79.7 ± 17.6 mm2 on the tibia and femur, respectively. The insertion areas of the deep MCL (dMCL) were 63.6 ± 13.4 mm2 and 71.9 ± 14.8 mm2 on the tibia and femur, respectively. The distances from the centroids of the tibial and femoral insertions of the sMCL to the tibial and femoral joint line were 62.4 ± 5.5 mm and 31.1 ± 4.6 mm, respectively. The distances from the centroids of dMCL in the tibial insertion and the femoral insertion to the tibial and femoral joint line were 6.5 ± 1.3 mm and 20.5 ± 4.2 mm, respectively. The distal portion of the dMCL (meniscotibial ligament - MTL) was approximately 1.7 times wider than the proximal portion of the dMCL (meniscofemoral ligament - MFL), whereas the MFL was approximately 3 times longer than the MTL. CONCLUSIONS: The morphologic data on the MCL may provide useful information for improving treatments of MCL-related pathology and performing MCL release during TKA.

Kinematics of the anterior cruciate ligament during gait.

BACKGROUND: The function of the anteromedial (AM) and posterolateral (PL) bundles of the anterior cruciate ligament (ACL) during gait has not been reported. HYPOTHESIS: The AM and PL bundles have distinct functional behavior during the stance phase of treadmill gait. STUDY DESIGN: Descriptive laboratory study. METHODS: Three-dimensional models of the knee were created by magnetic resonance images from 8 healthy subjects. The contour of the 2 bundle attachments were constructed on each model. Each bundle was represented by a straight line connecting its tibial and femoral attachment centroids. Next, the knee kinematics during the stance phase of gait was determined with a dual fluoroscopic imaging system. The relative elongation, sagittal plane elevation, coronal plane elevation, and transverse plane deviation of the 2 bundles were measured directly from heel strike to toe-off. RESULTS: At heel strike, the AM and PL bundles had first peak elongation of 9% +/- 7% and 9% +/- 13%, respectively. At 50% progress of the stance phase, both bundles were maximally elongated, 12% +/- 7% for the AM bundle and 13% +/- 15% for the PL bundle. No significant difference was found for each bundle between 40% and 60% of the stance phase (P > .05). With increasing knee flexion, the sagittal plane and coronal plane elevations of the 2 bundles decreased, whereas the deviation angles increased. CONCLUSION: Both bundles are anisometric and function in a similar manner during the stance phase of gait. They were maximally elongated throughout the midstance where they were stretched maximally to resist anterior tibial translation. CLINICAL RELEVANCE: This information can be useful for further improving anatomical ACL reconstructions to better reproduce the 2 bundle functions. It may also be useful for designing postoperative rehabilitation regimens to prevent overstretch of the grafts.

Comparison of single- and double-bundle anterior cruciate ligament reconstructions in restoration of knee kinematics and anterior cruciate ligament forces.

BACKGROUND: Anterior cruciate ligament (ACL) deficiency alters 6 degrees of freedom knee kinematics, yet only anterior translation and internal rotation have been the primary measures in previous studies. PURPOSE: To compare the 6 degrees of freedom knee kinematics and the graft forces after single- and double-bundle ACL reconstructions under various external loading conditions. STUDY DESIGN: Controlled laboratory study. METHODS: Ten human cadaveric knees were tested with a robotic testing system under 4 conditions: intact, ACL deficient, single-bundle reconstructed with a quadrupled hamstring tendon graft, and double-bundle reconstructed with 2 looped hamstring tendon grafts. Knee kinematics and forces of the ACL or ACL graft in each knee were measured under 3 loading conditions: an anterior tibial load of 134 N, a simulated quadriceps muscle load of 400 N, and combined tibial torques (10 N.m valgus and 5 N.m internal tibial torques) at 0 degrees , 15 degrees , 30 degrees , 60 degrees , and 90 degrees of knee flexion. RESULTS: The double-bundle reconstruction restored the anterior and medial laxities closer to the intact knee than the single-bundle reconstruction. However, the internal rotation of the tibia under the simulated quadriceps muscle load was significantly decreased when compared with the intact knee after both reconstructions, more so after double-bundle reconstruction (P < .05). The entire graft force of the double-bundle reconstruction was more similar to that of the intact ACL than that of the single-bundle reconstruction. However, the posterolateral bundle graft in the double-bundle reconstructed knee was overloaded as compared with the intact posterolateral bundle. CONCLUSION: The double-bundle reconstruction can better restore the normal anterior-posterior and medial-lateral laxities than the single-bundle reconstruction can, but an overloading of the posterolateral bundle graft can occur in a double-bundle reconstructed knee. CLINICAL RELEVANCE: Both single-bundle and double-bundle techniques cannot restore the rotational laxities and the ACL force distributions of the intact knee.

Single-tunnel double-bundle anterior cruciate ligament reconstruction with anatomical placement of hamstring tendon graft: can it restore normal knee joint kinematics?

BACKGROUND: Anatomical reconstruction techniques that can restore normal joint kinematics without increasing surgical complications could potentially improve clinical outcomes and help manage anterior cruciate ligament injuries more efficiently. HYPOTHESIS: Single-tunnel double-bundle anterior cruciate ligament reconstruction with anatomical placement of hamstring tendon graft can more closely restore normal knee anterior-posterior, medial-lateral, and internal-external kinematics than can conventional single-bundle anterior cruciate ligament reconstruction. STUDY DESIGN: Controlled laboratory study. METHODS: Kinematic responses after single-bundle anterior cruciate ligament reconstruction and single-tunnel double-bundle anterior cruciate ligament reconstruction with anatomical placement of hamstring tendon graft were compared with the intact knee in 9 fresh-frozen human cadaveric knee specimens using a robotic testing system. Kinematics of each knee were determined under an anterior tibial load (134 N), a simulated quadriceps load (400 N), and combined torques (10 N.m valgus and 5 N.m internal tibial torques) at 0 degrees , 15 degrees , 30 degrees , 60 degrees , and 90 degrees of flexion. RESULTS: Anterior tibial translations were more closely restored to the intact knee level after single-tunnel double-bundle reconstruction with anatomical placement of hamstring tendon graft than with a single-bundle reconstruction under the 3 external loading conditions. Under simulated quadriceps load, the mean internal tibial rotations after both reconstructions were lower than that of the anterior cruciate ligament-intact knee with no significant differences between these 3 knee conditions at 0 degrees and 30 degrees of flexion (P > .05). The increased medial tibial shifts of the anterior cruciate ligament-deficient knees were restored to the intact level by both reconstruction techniques under the 3 external loading conditions. CONCLUSION: Single-tunnel double-bundle anterior cruciate ligament reconstruction with anatomical placement of hamstring tendon graft can better restore the anterior knee stability compared with a conventional single-bundle reconstruction. Both reconstruction techniques are efficient in restoring the normal medial-lateral stability but overcorrect the internal tibial rotations. CLINICAL RELEVANCE: Single-tunnel double-bundle anterior cruciate ligament reconstruction with anatomical placement of hamstring tendon graft could provide improved clinical outcomes over a conventional single-bundle reconstruction.

In situ forces in the anteromedial and posterolateral bundles of the anterior cruciate ligament under simulated functional loading conditions.

BACKGROUND: The in situ forces of the anteromedial (AM) and posterolateral bundles (PL) of the anterior cruciate ligament (ACL) under simulated functional loads such as simulated muscle loads have not been reported. These data are instrumental for improvement of the anatomical double-bundle ACL reconstruction. HYPOTHESIS: The load-sharing patterns of the 2 bundles are complementary under simulated muscle loads. STUDY DESIGN: Descriptive laboratory study. METHODS: Eight cadaveric knees in this study were sequentially studied using a robotic testing system. Each knee was tested under 3 external loading conditions including (1) a 134-N anterior tibial load; (2) combined rotational loads of 10 N x m of valgus and 5 N x m internal tibial torques; and (3) a 400-N quadriceps muscle load with the knee at 0 degrees , 15 degrees , 30 degrees , 60 degrees , and 90 degrees of flexion. The in situ forces of the 2 bundles of ACL were determined using the principle of superposition. RESULTS: Under the anterior tibial load, the PL bundle carried peak loads at full extension and concurrently had significantly lower force than the AM bundle throughout the range of flexion (P <.05). Under the combined rotational loads, the PL bundle contributed to carrying the load between 0 degrees and 30 degrees , although less than the AM bundle. Under simulated muscle loads, both bundles carried loads between 0 degrees and 30 degrees . There was no significant difference between the 2 bundle forces at all flexion angles (P > .05). CONCLUSION: Under externally applied loads, in general, the AM bundle carried a greater portion of the load at all flexion angles, whereas the PL bundle only shared the load at low flexion angles. The bundles functioned in a complementary rather than a reciprocal manner to each other. CLINICAL RELEVANCE: The data appear to support the concept that both bundles function in a complementary manner. Thus, how to re-create the 2 bundle functions in an ACL reconstruction should be further investigated.

A clinical comparison of screw and suture fixation of anterior cruciate ligament tibial avulsion fractures.

BACKGROUND: Screw and suture fixations are the most commonly used methods of fixation in treatment of anterior cruciate ligament tibial avulsion fractures. Even though a few biomechanical studies have compared the stability of the 2 fixation techniques, a clinical comparison has not yet been reported. HYPOTHESIS: The authors hypothesized that both fixations would be identical in all studied clinical outcome measures at a minimum 2-year follow-up. STUDY DESIGN: Cohort study; Level of evidence, 3. MATERIALS AND METHODS: Thirty-three patients treated with either screw fixation (16 patients) or suture fixation (17 patients) within 1 month of the anterior cruciate ligament tibial avulsion fracture (type II or III) without associated ligamentous injury were included. All patients were evaluated at a minimum 2-year follow-up in terms of Lysholm knee scores and return to preinjury activities. Knee stability was compared based on the Lachman test and stress radiography. RESULTS: No significant differences were found between the 2 groups in terms of average Lysholm knee scores (91.7 in the screw group and 92.7 in the suture group, P = .413) at follow-up. All patients except 2 (1 in each group) returned to preinjury activity levels. However, flexion contractures (5 degrees to 10 degrees) were found in 3 patients in the screw group and 2 patients in the suture group without significant intergroup difference. Stabilities based on the Lachman test and instrumented stress radiography were also similar between the 2 groups at follow-up. However, 2 patients in the screw group and 1 in the suture group showed more than 5 mm laxity compared with the contralateral knee on stress radiographs. CONCLUSION: Both the screw and suture fixation techniques for the anterior cruciate ligament tibial avulsion fracture produced relatively good results in terms of functional outcomes and stability without any significant differences. However, some patients in both groups showed residual laxity or flexion contractures.

Prospective comparative study of anterior cruciate ligament reconstruction using the double-bundle and single-bundle techniques.

BACKGROUND: The intent of double-bundle anterior cruciate ligament reconstruction is to reproduce the normal anterior cruciate ligament anatomy and improve knee joint rotational stability. However, no consensus has been reached on the advantages of this technique over the single-bundle technique. HYPOTHESIS: We hypothesized that double-bundle anterior cruciate ligament reconstruction could provide better intraoperative stability and clinical outcome than single-bundle reconstruction. TYPE OF STUDY: Cohort study; Level of evidence, 2. METHODS: Forty patients with anterior cruciate ligament injury in one knee were recruited; 20 were allocated to a double-bundle anterior cruciate ligament reconstruction group and 20 to a single-bundle anterior cruciate ligament reconstruction group. Intraoperative stabilities at 30 degrees of knee flexion were compared between the 2 groups using a navigation system. Clinical outcomes including Lysholm knee scores, Tegner activity scores, Lachman and pivot-shift test results, and radiographic stabilities were also compared between the 2 groups after a minimum of 2 years of follow-up. RESULTS: Intraoperative anterior and rotational stabilities after anterior cruciate ligament reconstruction in the double-bundle group were significantly better than those in single-bundle group (P = .020 and P < .001, respectively). Nineteen patients (95%) in each group were available at a minimum 2-year follow-up. Clinical outcomes including Lysholm knee and Tegner activity scores were similar in the 2 groups at 2-year follow-up (P > .05). Furthermore, stability results of the Lachman and pivot-shift tests, and radiologic findings at 2-year follow-up failed to reveal any significant intergroup differences (P > .05). CONCLUSION: Although double-bundle anterior cruciate ligament reconstruction produces better intraoperative stabilities than single-bundle anterior cruciate ligament reconstruction, the 2 modalities were found to be similar in terms of clinical outcomes and postoperative stabilities after a minimum of 2 years of follow-up.