RESUMEN
Due to the separation technique employed, capillary electrophoresis coupled to mass spectrometry (CE-MS) analysis performances are significantly influenced by the chemical composition and the complexity of the sample. In various applications, that impact has prevented the use of CE-MS for the characterization and quantification of proteins in biological samples. Here we present the development and evaluation and a sample preparation procedure, based on affinity purification, for the specific extraction of the monoclonal antibody (mAbs) infliximab from human serum in order to perform subsequent proteolytic digestion and CE-MS/MS analysis. Three distinctive sample preparation strategies were envisaged. In each case, the different steps composing the protocol were thoroughly optimized and evaluated in order to provide a sample preparation addressing the important complexity of serums samples while providing an optimal compatibility with CE-MS/MS analysis. The different sample preparation strategies were assessed concerning the possibility to achieve an appropriate absolute quantification of the mAbs using CE-MS/MS for samples mimicking patient serum samples. Also, the possibility to perform the characterization of several types of post-translational modifications (PTMs) was evaluated. The sample preparation protocols allowed the quantification of the mAbs in serums samples for concentration as low as 0.2 µg·mL-1 (2.03 nM) using CE-MS/MS analysis, also the possibility to characterize and estimate the modification level of PTMs hotspots in a consistent manner. Results allowed to attribute the effect on the electrophoretic separation of the different steps composing sample preparation. Finally, they demonstrated that sample preparation for CE-MS/MS analysis could benefit greatly for the extended applicability of this type of analysis for complex biological matrices.
Asunto(s)
Anticuerpos Monoclonales , Espectrometría de Masas en Tándem , Humanos , Anticuerpos Monoclonales/química , Espectrometría de Masas en Tándem/métodos , Procesamiento Proteico-Postraduccional , Proteolisis , Electroforesis Capilar/métodosRESUMEN
Bothrops venoms are rich in enzymes acting on platelets and coagulation. This action is dependent on two major co-factors, i.e., calcium and phospholipids, while antivenoms variably neutralize venom-related coagulopathy effects. Our aims were (i) to describe the composition of B. atrox and B. lanceolatus venoms; (ii) to study their activity on the whole blood using rotational thromboelastometry (ROTEM); (iii) to evaluate the contribution of calcium and phospholipids in their activity; and (iv) to compare the effectiveness of four antivenoms (Bothrofav™, Inoserp™ South America, Antivipmyn™ TRI, and PoliVal-ICP™) on the procoagulant activity of these two venoms. Venom composition was comparable. Both venoms exhibited hypercoagulant effects. B. lanceolatus venom was completely dependent on calcium but less dependent on phospholipids than B. atrox venom to induce in vitro coagulation. The four antivenoms neutralized the procoagulant activity of the two venoms; however, with quantitative differences. Bothrofav™ was more effective against both venoms than the three other antivenoms. The relatively similar venom-induced effects in vitro were unexpected considering the opposite clinical manifestations resulting from envenomation (i.e., systemic bleeding with B. atrox and thrombosis with B. lanceolatus). In vivo studies are warranted to better understand the pathophysiology of systemic bleeding and thrombosis associated with Bothrops bites.
Asunto(s)
Bothrops , Venenos de Crotálidos , Mordeduras de Serpientes , Trombosis , Animales , Antivenenos/farmacología , Calcio , Hemorragia/inducido químicamente , Hemorragia/tratamiento farmacológico , Venenos de Crotálidos/toxicidadRESUMEN
Despite reports indicating the potential impact of post-translational modifications on the activity of a monoclonal antibody, their prediction or monitoring post-administration remains a challenge. In addition, with the expiration of patents concerning the early generation of mAbs, the production of biosimilars is constantly increasing. Structural differences of biosimilars compared to the innovator product are commonly evaluated for the formulated product in the context of biosimilarity assessment. However, estimating their structural outcome after administration is particularly difficult. Due to the complexity of in vivo studies, there is a need to develop analytical strategies to predict PTMs consequently to their administration and their impact on mAbs potency. Here, we identified and evaluated the modification kinetics of 4 asparagine deamidations and 2 aspartate isomerizations of infliximab innovator product (Remicade®) and two biosimilars (Inflectra® and Remsima®) in vitro using serum incubation at 37 °C. The methodology was based on a bottom-up approach with capillary electrophoresis hyphenated with mass spectrometry analysis for an unequivocal assignment of modified and unmodified forms. 2 asparagines demonstrated a gradual deamidation correlated with incubation time. The specific extraction efficiency was evaluated to determine possible changes in the antigen binding affinity of infliximab with the incubation. Results showed the possibility to achieve an additional aspect concerning biosimilarity assessment, oriented on the study of the structural stability after administration.
Asunto(s)
Biosimilares Farmacéuticos , Infliximab/química , Biosimilares Farmacéuticos/química , Espectrometría de Masas en Tándem/métodos , Cinética , Procesamiento Proteico-Postraduccional , Electroforesis Capilar/métodos , AsparaginaRESUMEN
Monoclonal antibodies (mAbs) are demonstrating major success in various therapeutic areas such as oncology and the treatment of immune disorders. Over the past two decades, novel analytical methodologies allowed to address the challenges of mAbs characterization in the context of their production. However, after administration only their quantification is performed and insights regarding their structural evolution remain limited. For instance, clinical practice has recently highlighted significant inter-patient differences in mAb clearance and unexpected clinical responses, without providing alternative interpretations. Here, we report the development of a novel analytical strategy based on capillary zone electrophoresis coupled to tandem mass spectrometry (CE-MS/MS) for the simultaneous absolute quantification and structural characterization of infliximab (IFX) in human serum. CE-MS/MS quantification was validated over the range 0.4-25 µg·mL-1 corresponding to the IFX therapeutic window and achieved a LOQ of 0.22 µg·mL-1 (1.5 nM) while demonstrating outstanding specificity compared to the ELISA assay. CE-MS/MS allowed structural characterization and estimation of the relative abundance of the six major N-glycosylations expressed by IFX. In addition, the results allowed characterization and determination of the level of modification of post-translational modifications (PTMs) hotspots including deamidation of 4 asparagine and isomerization of 2 aspartate. Concerning N-glycosylation and PTMs, a new normalization strategy was developed to measure the variation of modification levels that occur strictly during the residence time of IFX in the patient's system, overcoming artefactual modifications induced by sample treatment and/or storage. The CE-MS/MS methodology was applied to the analysis of samples from patients with Crohn's disease. The data identified a gradual deamidation of a particular asparagine residue located in the complementary determining region that correlated with IFX residence time, while the evolution of IFX concentration showed significant variability among patients.
Asunto(s)
Anticuerpos Monoclonales , Espectrometría de Masas en Tándem , Humanos , Anticuerpos Monoclonales/química , Espectrometría de Masas en Tándem/métodos , Asparagina , Infliximab , Electroforesis Capilar/métodosRESUMEN
Monoclonal antibodies (mAbs) represent a dynamic class of biopharmaceutical products, as evidenced by an increasing number of market authorizations for mAb innovator and biosimilar products. Stability studies are commonly performed during product development, for instance, to exclude unstable molecules, optimize the formulation or determine the storage limit. Such studies are time-consuming, especially for mAbs, because of their structural complexity which requires multiple analytical techniques to achieve a detailed characterization. We report the implementation of a novel methodology based on the accelerated stability assessment program (ASAP) in order to model the long-term stability of mAbs in relation to different structural aspects. Stability studies of innovator infliximab and two different biosimilars were performed using forced degradation conditions alongside in-use administration conditions in order to investigate their similarity regarding stability. Thus, characterization of post-translational modifications was achieved using liquid-chromatography-tandem mass spectrometry (LC-MS/MS) analysis, and the formation of aggregates and free chain fragments was characterized using size-exclusion chromatography-multi-angle light scattering (SEC-MALS-UV/RI) analysis. Consequently, ASAP models were investigated with regard to free chain fragmentation of mAbs concomitantly with N57 deamidation, located in the hypervariable region. Comparison of ASAP models and the long-term stability data from samples stored in intravenous bags demonstrated a relevant correlation, indicating the stability of the mAbs. The developed methodology highlighted the particularities of ASAP modeling for mAbs and demonstrated the possibility to independently consider the different types of degradation pathways in order to provide accurate and appropriate prediction of the long-term stability of this type of biomolecule.
Asunto(s)
Anticuerpos Monoclonales , Biosimilares Farmacéuticos , Anticuerpos Monoclonales/química , Infliximab , Cromatografía Liquida/métodos , Biosimilares Farmacéuticos/química , Espectrometría de Masas en Tándem , Cromatografía en GelRESUMEN
We report the formulation, characterization, colloidal stability, and in vitro efficiency of Fisetin nanocrystals stabilized by poloxamer P407. Such nanocrystals present a nanometer scale (148.6 ± 1.1 nm) and a high homogeneity (polydispersity index of 0.17 ± 0.01), with a production yield of 97.0 ± 2.5%. The engineered formulations of nanocrystals suspension (pH of 7.4 ± 0.1), stabilized via steric repulsion, are stable for several days in aqueous environment (Milli Q water, NaCl 10 mM or mannitol 5% w/v), for few days in HEPES buffered saline (HBS) (20 / 150 mM) under sink conditions, and in culture medium. After freeze drying in 5% w/v mannitol, the nanocrystal formulations can be stored at -80 °C for at least 120 days. Drug release experiments displayed a 98.7 ± 5.1% cumulative release over 3 days in HBS. Compared to the free drug, the nanocrystal formulations showed an improved cytotoxicity highlighted by the decrease of the half maximal inhibitory concentration for both murine Lewis lung carcinoma (3LL) and human endothelial (EA.hy926) cell lines. In addition, after incubation with Fisetin nanosuspensions, significant changes in the cell morphology for both cell lines were observed, showing an improved anti-angiogenic effect of nanocrystals formulation compared to the free drug. Overall, Fisetin formulated as nanocrystals showed enhanced biopharmaceutical properties and in vitro activity, offering a wide range of indications for challenging applications in the clinic.
RESUMEN
Monoclonal antibodies (mAbs) represent a major category of biopharmaceutical products which due to their success as therapeutics have recently experienced the emergence of mAbs originating from different types of trafficking. We report the development of an analytical strategy which enables the structural identification of mAbs in addition to comprehensive characterization and quantification in samples in potentially counterfeit samples. The strategy is based on the concomitant use of capillary zone electrophoresis analysis (CZE-UV), size exclusion chromatography coupled to multi-angle light scattering (SEC-MALS) and liquid chromatography hyphenated to tandem mass spectrometry (LC-MS/MS). This analytical strategy was applied to the investigation of different samples having unknown origins seized by the authorities, and potentially incorporating an IgG 4 or an IgG 1. The results achieved from the different techniques demonstrated to provide orthogonal and complementary information regarding the nature and the structure of the different mAbs. Therefore, they allowed to conclude unequivocally on the identification of the mAbs in the potentially counterfeit samples. Finally, a LC-MS/MS quantification method was developed which specificity was to incorporate a different mAbs labeled with stable isotopes as internal standard. The LC-MS/MS quantification method was validated and thus demonstrated the possibility to use common peptides with the considered IgG in order to achieve limit of quantification as low as 41.4 nM. The quantification method was used to estimate the concentration in the investigated samples using a single type of internal standard and experimental conditions, even in the case of mAbs with no stable isotope labeled homologues available.
Asunto(s)
Antineoplásicos Inmunológicos , Espectrometría de Masas en Tándem , Anticuerpos Monoclonales/química , Cromatografía Liquida/métodos , Electroforesis Capilar , Espectrometría de Masas en Tándem/métodosRESUMEN
During pharmaceutical development, the stability of the product is assessed during long-term study. If any stability issues are discovered at this point of the process, it will result in re-formulation and important loss of time and cost. Therefore, important efforts are made in order to select the most stable product. Nevertheless, predicting the stability of the developed product at early stage of the development is challenging. Accelerated stability assessment program (ASAP), based on modified Arrhenius equation and isoconversion approach, appears as an interesting tool allowing to evaluate stability and shelf-life of pharmaceutical product in a short period of time. Nevertheless, few studies using these approaches are published in the literature, and the majority concern small drug molecules. Here, this approach was applied on a small drug molecule, ascorbic acid (AA), and on a cyclic hexapeptide named cFEE. AA and cFEE have been exposed to various temperatures for a maximum of 3 weeks, and then analyzed by capillary electrophoresis coupled to UV detection (CZE-UV) for AA or LC-MS for cFEE. The level of major degradation products was used to build ASAP models and predict the stability of both compounds. Comparison between predicted and long-term data were found accurate for both compounds undergoing two different degradation pathways (oxidation and hydrolysis), confirming the real interest of accelerated predicting stability approach for consistent determination of long-term stability shelf-life of pharmaceutical products.
Asunto(s)
Ácido Ascórbico , Estabilidad de Medicamentos , Preparaciones Farmacéuticas , Cromatografía Liquida , Espectrometría de Masas , TemperaturaRESUMEN
CE has been demonstrated to be a useful and powerful separation method for the characterization of charged and neutral molecules. Since the end of the 1980s and the development of the first commercialized CE device, the use of this separation method has continued to grow for academic and industrial research involving inexorably increasing of the number of CE users. Whatever the application domain, each CE user is daily confronted to the same problems often based on basic calculations of separation properties. In order to help the community of CE users to get quickly and easily a lot of information, and desiring to provide a tool running on mobile platforms, CEToolbox has been developed as a free Android application. Within few clicks, CEToolbox offers extensive injection information as injected volume, total capillary volume, proportion and amount of injected sample, rinsing time, and electrical field. Moreover, three additional tabs allow to obtain the calculation of the viscosity and the conductivity of BGE, and the separation flow rates. Finally, a last tab is dedicated to the calculation of electroosmotic mobility and effective mobilities for a maximum of 20 compounds. CEToolbox, which can be downloaded for free on Google and F-Droid application stores, was developed to simplify the daily of CE users regardless of the CE devices.
Asunto(s)
Electroforesis Capilar , Conductividad Eléctrica , ElectroósmosisRESUMEN
Ascorbic acid is a powerful antioxidant compound involved in many biological functions, and a chronic deficiency is at the origin of scurvy disease. A simple, rapid, and cost-effective capillary electrophoresis method was developed for the separation and simultaneous quantification of ascorbic acid and the major degradation products: dehydroascorbic acid, furfural, and furoic acid. Systematic optimization of the conditions was performed that enabled baseline separation of the compounds in less than 10 min. In addition to simultaneous quantification of ascorbic acid alongside to the degradation products, stability studies demonstrated the possibility using capillary electrophoresis to separate and identify the major degradation products. Thus, high-resolution tandem mass spectrometry experiments were conducted in order to identify an unknown degradation product separated by capillary electrophoresis and significantly present in degraded samples. Comparison of mass spectrometry data and capillary electrophoresis electropherograms allowed to identify unambiguously trihydroxy-keto-valeraldehyde. Finally, capillary electrophoresis was successfully applied to evaluate the composition of different pharmaceutical preparation of ascorbic acid. Results showed the excellent performance of the capillary electrophoresis method due to the separation of excipients from the compounds of interest, which demonstrated the relevance of using an electrophoretic separation in order to perform comprehensive stability studies of ascorbic acid.
Asunto(s)
Ácido Ascórbico/análisis , Electroforesis Capilar , Espectrometría de Masas en TándemRESUMEN
Protein conjugates such as antibody-drugs conjugates (ADCs) represents the next generation of therapeutic proteins. They allow to combine the biological properties of the protein format with the characteristics of the conjugated ligands. The reaction implemented to couple ligands to the peptide backbone represents a crucial aspect of the production of protein conjugates, influencing the nature and the heterogeneity of the conjugates obtained. Here, we report the concomitant use of MALDI-TOF MS and LC-MS/MS analysis to investigate the chemical functionalization of human serum albumin (HSA) by the intermediate of lysine residues, previously used to generate biopharmaceutical agents for medical imaging. A kinetic was performed by collecting samples after different reaction times and analyzing them using the two techniques. MALDI-TOF MS analyses allowed estimating the number of conjugated ligands in a robust manner and assess the global functionalization kinetic on the intact protein level. Results demonstrated a maximum of 38 modified residues out of the 59 lysines available showing the limitation of the chemical functionalization. Consequently, LC-MS/MS analysis provided a site-specific characterization of the residues undergoing chemical modification. Data exhibited unique properties due to the presence of the ligands which allowed to identify without ambiguity the residues exhibiting different modification rate and enabled the identification of the unmodified lysine. Results were compared to the structure of HSA described from crystallography data. The comparison strongly suggested that accessibility is influencing the residues respective reactivity. The relevant complementarity of the different techniques could be emphasized in order to perform an extensive characterization concerning the evolution of the primary structure of the protein during the chemical reaction, providing an improved insight on the conjugation process and offering the potentiality to tune the reaction.
Asunto(s)
Inmunoconjugados/análisis , Lisina/análisis , Albúmina Sérica Humana/análisis , Secuencia de Aminoácidos , Química Farmacéutica/métodos , Cristalografía por Rayos X , Imidoésteres/química , Inmunoconjugados/química , Cinética , Proteolisis , Albúmina Sérica Humana/química , Albúmina Sérica Humana/ultraestructura , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Espectrometría de Masas en Tándem/métodosRESUMEN
Capillary electrophoresis-mass spectrometry (CE-MS) enables the characterization of the primary structure of ADCs. An analytical method based on a derived bottom-up proteomic workflow is designed to provide detailed information about the amino acid sequence, the glycosylation profiling, and the location on the peptide backbone of the conjugated drugs. Here we describe the experimental protocol applied on the characterization of cysteine-linked brentuximab vedotin (Adcetris®).
Asunto(s)
Anticuerpos Monoclonales/química , Cisteína/química , Electroforesis Capilar , Inmunoconjugados/análisis , Inmunoconjugados/química , Espectrometría de Masas , Antineoplásicos/análisis , Antineoplásicos/química , Brentuximab Vedotina/análisis , Brentuximab Vedotina/química , Cisteína Endopeptidasas/química , Electroforesis Capilar/métodos , Espectrometría de Masas/métodos , Espectrometría de Masa por Ionización de Electrospray , Espectrometría de Masas en TándemRESUMEN
Synthetic peptides mimicking the binding site of fertilin ß to its receptor, integrin α6ß1, were shown to inhibit sperm-egg fusion when added to in vitro media. In contrast, the synthetic cyclic hexapeptide, cyclo(Cys1-Ser2-Phe3-Glu4-Glu5-Cys6), named as cFEE, proved to stimulate gamete fusion. Owing to its biological specificity, this hexapeptide could help improve the in vitro fertilization pregnancy rate in human. In an attempt to establish the structure-activity relationship of cFEE, its structural dynamics was herein analyzed by means of ultraviolet circular dichroism (UV-CD) and Raman scattering. The low concentration CD profile in water, containing mainly a deep minimum at â¼202 nm, is consistent with a rather unordered chain. However, an ordering trend of the peptide loop has been observed in a less polar solvent such as methanol, where the UV-CD signal shape is formed by a double negative marker at â¼202/215 nm, indicating the presence of a type-II' ß-turn. Raman spectra recorded in aqueous samples upon a 100-fold concentration increase, still showed an important population (â¼30%) of the disordered structure. The structural flexibility of the disulfide bridge was confirmed by the Raman markers arising from the Cys1-Cys6 disulfide bond-stretch motions. Density functional theory calculations highlighted the formation of the type-II' ß-turn on the four central residues of cFEE (i.e., -Ser2-Phe3-Glu4-Glu5-) either with a left- or with a right-handed disulfide. The structure with a left-handed S-S bond, however, appears to be more stable.
RESUMEN
The Fc-fusion protein atacicept is currently under clinical investigation for its biotherapeutic application in autoimmune diseases owing to its ability to bind the two cytokines B-Lymphocyte Stimulator (BLyS) and A PRoliferation-Inducing Ligand (APRIL). Like typical recombinant IgG-based therapeutics, atacicept is a glycoprotein whose glycosylation-related heterogeneity arises from the glycosylation-site localization, site-specific occupation and structural diversity of the attached glycans. Here, we present a first comprehensive site-specific N- and O-glycosylation characterization of atacicept using mass spectrometry-based workflows. First, N- and O-glycosylation sites and their corresponding glycoforms were identified. Second, a relative quantitation of the N-glycosylation site microheterogeneity was achieved by glycopeptide analysis, which was further supported by analysis of the released N-glycans. We confirmed the presence of one N-glycosylation site, carrying 47 glycoforms covering 34 different compositions, next to two hinge region O-glycosylation sites with core 1-type glycans. The relative O-glycan distribution was analyzed based on the de-N-glycosylated intact protein species. Overall, N- and O-glycosylation were consistent between two individual production batches.
Asunto(s)
Espectrometría de Masas , Polisacáridos/análisis , Proteínas Recombinantes de Fusión/química , GlicosilaciónRESUMEN
Liposomes are nanocarriers composed of phospholipids, especially designed to potentially carry drugs. However, liposomes suffer in terms of leakage of small hydrophilic drugs. To control the release, a system with lipid shell and polymeric viscous core, namely Hybrid liposome/polymer inside (HLPin), has been designed. For this purpose, we setup a syringe pump apparatus equipped with homemade tubing system. HLPin formulation consisting of poloxamer (5% w/v) was found to be optimal when produced at injection rates of 5â¯mL.min-1. Then, we tend to characterize the HLPin with DLS, TEM, TRPS, thermal analysis and densitometry in comparison with a polymer added after formation of the liposomes. The optimal formulation was evaluated for its stability and cytotoxicity. The selected conditions and composition resulted in nanocarriers which are highly reproducible with mono-disperse size distribution with an average size of 206⯱â¯4.8â¯nm and a polydispersity index of 0.15⯱â¯0.015. Densitometry and thermal analysis results confirmed the formation of HLPin. Interestingly, HLPin were stable over 2â¯months, produced no cytotoxicity and exhibited slow release of rhodamine and Doxorubicin in comparison to liposome formulation. Our homemade tubing system coupled with syringe pump apparatus achieved reproducible, precisely controlled production for the HLPin formulation which can be scale up.
Asunto(s)
Nanopartículas/administración & dosificación , Poloxámero/administración & dosificación , Animales , Antibióticos Antineoplásicos/administración & dosificación , Antibióticos Antineoplásicos/química , Línea Celular , Supervivencia Celular/efectos de los fármacos , Preparaciones de Acción Retardada/administración & dosificación , Preparaciones de Acción Retardada/química , Doxorrubicina/administración & dosificación , Doxorrubicina/química , Liberación de Fármacos , Colorantes Fluorescentes/administración & dosificación , Colorantes Fluorescentes/química , Interacciones Hidrofóbicas e Hidrofílicas , Liposomas , Ratones , Nanopartículas/química , Poloxámero/química , Rodaminas/administración & dosificación , Rodaminas/químicaRESUMEN
Monoclonal antibodies (mAbs) and their related products as antibody-drug-conjugates (ADCs) or biosimilars represent a constantly growing class of molecules therapeutic proteins used as treatment against numerous diseases. These compounds can undergo several modifications which could alter the efficiency of treatments. In this context, several analytical methods were designed to deliver a comprehensive structural characterization and guarantee the quality of biotherapeutics. Capillary electrophoresis (CE) is considered today as a major technique for the analysis of biotherapeutics due to benefic characteristics as high resolution separation and miniaturized format. Different CE modes have been developed to characterize mAbs at different levels such as capillary gel electrophoresis (CGE), capillary isoelectric focusing (cIEF), and capillary zone electrophoresis (CZE). Recent developments in CE-mass spectrometry (MS) coupling assessed this technology as a promising tool to obtain high level structural characterization of biopharmaceuticals. Moreover, upcoming techniques such as 2D CE-MS and microfluidic systems are now emerging to offer new possibilities beyond actual limits. This review will be dedicated to discuss the state-of-the-art CE-based methods for the characterization of mAbs and ADCs in the period 2016-2018.
Asunto(s)
Anticuerpos Monoclonales , Electroforesis Capilar , Inmunoconjugados , Anticuerpos Monoclonales/análisis , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/aislamiento & purificación , Humanos , Inmunoconjugados/análisis , Inmunoconjugados/química , Inmunoconjugados/aislamiento & purificación , Focalización Isoeléctrica , Espectrometría de MasasRESUMEN
A 38-year-old man was admitted in the intensive care unit (ICU) after supposed ingestion of 504 sustained-release tablets of Theralithe™ corresponding ~200 g of lithium carbonate. At the admission, ~19.5 h after ingestion, the patient was conscious with trembling limbs, intense thirst, profuse sweats and vomiting and lithium serum concentration was 14.2 mmol/L. Toxicological screenings performed in urine and serum, were negative. Patient was treated with continuous extrarenal epuration by continue veno-venous hemodiafiltration starting (CCVHDF) 24 h post-admission and was carried on until 64 h. After 11 days in ICU, the patient was dismissed to the service without sequelae, and transferred to a psychiatric unit. To follow lithium concentrations in serum, urines and dialysates, we developed a simple, rapid and reliable method by capillary zone electrophoresis (CZE). Separation was achieved in 7 min. The method was linear between 0.14 and 1.44 mmol/L for serum samples, and between 0.07 and to 1.44 mmol/L for urines and dialysates. Limits of quantification were 0.15 mmol/L and 0.07 mmol/L for serum and others fluids, respectively. Intra- and inter-day precisions expressed as CV were systematically inferior to 12.1% for serum and 8.2% for other fluids. Results obtained regarding precision, accuracy, recovery and stability were satisfying, with recoveries ranging from 91.0 to 102.0%. Serum, urine and dialysate samples were measured using CZE and flame photometry. We observed a strong correlation between both methods as assessed by linear regression and Bland-Altman analysis. For the intoxicated patient, the assay was successfully applied to serum, urine and dialysates to determine the amount of lithium present in circulation and excreted. Lithium amounts in dialysates were estimated to correspond to 89% of total lithium excreted during CCVHF session while urine excretion account only for 11%.
Asunto(s)
Antidepresivos/envenenamiento , Electroforesis Capilar/métodos , Carbonato de Litio/envenenamiento , Litio , Enfermedad Aguda , Adulto , Calibración , Humanos , Litio/sangre , Litio/orina , Masculino , Reproducibilidad de los Resultados , Espectrofotometría AtómicaRESUMEN
Lactosylated albumin is currently used as a radiopharmaceutical agent to image the liver asialoglycoprotein receptors and quantify hepatic liver function in various diseases. A lactosylated protein (LACTAL) conjugate showed excellent liver uptake compared to non-lactosylated protein and a high signal to noise ratio, based on the biodistribution in mice using 99mTc-scintigraphy. However, in the laboratory, it is useful to have a method that can be used in daily practice to quantify cellular targeting or biodistribution. We propose a methodology from synthesis validation to pre-clinical demonstration and introduce a new practical detector (LACTAL.Eu) of the LACTAL molecule in biological media. We confirmed the purity and colloidal stability of the sample through physical analytical techniques, then showed the absence of in vitro toxicity of the agent and demonstrated in vitro targeting. Taking advantage of the fluorescence decay of the lanthanide, we performed measurements directly on the cell media without any further treatment. Finally, biodistribution in mice was confirmed by ex vivo measurements.
Asunto(s)
Europio/química , Lactosa/química , Albúmina Sérica Humana/química , Coloración y Etiquetado , Aglutininas/metabolismo , Animales , Femenino , Glicosilación , Células Hep G2 , Humanos , Ratones Endogámicos BALB C , Ricina/metabolismo , Distribución TisularRESUMEN
INTRODUCTION: The development and optimization of antibody drug conjugates (ADCs) rely on improving their analytical and bioanalytical characterization, by assessing critical quality attributes (CQAs). Among the CQAs, the glycoprofile, drug load distribution (DLD), the amount of unconjugated antibody (D0), the average drug-to-antibody ratio (DAR), the drug conjugation sites and the residual drug-linker and related product proportions (SMDs) in addition to high and low molecular weight species (H/LMWS), and charge variants are the most important ones. Areas covered: The analytical and structural toolbox for the characterization of 1st, 2d and 3d generation ADCs was significantly extended in the last 3 years. Here, we reviewed state-of-the-art techniques, such as liquid chromatography, high resolution native and ion mobility mass spectrometry, multidimensional liquid chromatography and capillary electrophoresis hyphenated to mass spectrometry, reported mainly since 2016. Expert commentary: These emerging techniques allow a deep insight into important CQAs that are related to ADC Chemistry Manufacturing and Control (CMC) as well as an improved understanding of in vitro and in vivo ADC biotransformations. This knowledge and the development of quantitative bioanalytical assays will continue to contribute to early-developability assessment for the optimization of all the ADC components (i.e. antibody, drug, and linker) and help to bring next-generation ADCs into late clinical development and to the market.
Asunto(s)
Inmunoconjugados/análisis , Inmunoconjugados/química , Secuencia de Aminoácidos , Cromatografía , Electroforesis , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Espectrometría de MasasRESUMEN
The hyphenation of capillary electrophoresis and mass spectrometry (CE/MS) remains a minor technique compared with liquid chromatography/mass spectrometry (LC/MS), which represents nowadays the standard instrumentation, regardless of its introduction thirty years ago. However, from a theoretical point of view, CE coupling should be quite favorable especially with electrospray ionization mass spectrometry (ESI-MS). At the time, the sensitivity provided by CE/MS was often limited, due to hyphenation requirements, which at some point appeared to disqualify CE/MS from benefiting from the performance gain driving the evolution of MS instruments. However, this context has been significantly modified in a matter of a few years. The development of innovative CE/MS interfacing systems has enabled an important improvement regarding sensitivity and reinforced robustness in order to provide an instrumentation accessible to the largest scientific community. Because of the unique selectivity delivered by the electrophoretic separation, CE/MS has proved to be particularly relevant for the analysis of biological molecules. The conjunction of these aspects is motivating the interest in CE/MS analysis and shows that CE/MS is mature enough to enrich the toolbox of analytical techniques for the analysis of complex biological samples. Here we discuss the characteristics of the major types of high-sensitivity CE/ESI-MS instrumentation and emphasize the late evolution and future positioning of CE/MS analysis for the characterization of biological molecules like peptides and proteins, through some pertinent applications.