RESUMEN
We present a novel and stable laminated structure to enhance the performance and stability of silicon (Si) photocathode devices for photoelectrochemical (PEC) water splitting. First, by utilizing Cu nanoparticle catalysts to work on a n+p-black Si substrate via the metal-assisted chemical etching, we can achieve the black silicon with a porous pyramid structure. The low depth holes on the surface of the pyramid caused by Cu etching not only help enhance the light capture capability with quite low surface reflectivity (<5%) but also efficiently protect the p-n junction from damage. To improve the charge migration efficiency and mitigate parasitic light absorption from cocatalysts at the same time, we drop casted quantum dots (QDs) MoS2 with the size of nanometer scale as the first layer of catalyst. Hence, we then can safely electrodeposit cocatalyst Co nanoparticles to further enhance interface transfer efficiency. The synergistic effects of cocatalysts and optimized light absorption from the morphology and QDs contributed to the overall enhancement of PEC performance, offering a promising pathway for an efficient, low cost, and stable (over 100 h) hydrogen production photocathode.
RESUMEN
Ion migration is significantly enhanced in lead-halide perovskites with a soft crystal lattice, which can promote the formation of a heterogeneous interface between two such materials with different halide-anion compositions. Here we have deposited a single CsPbI3 nanocrystal (NC) on top of an individual CsPbBr3 microplate to create a mixed-halide CsPbBrxI3-x (0 < x < 3) NC by means of the anion exchange process. The formation of a CsPbBrxI3-x/CsPbBr3 heterostructure is confirmed by the much-enlarged geometric volume of the CsPbBrxI3-x NC as compared to the original CsPbI3 one, as well as by its capability of receiving photogenerated excitons from the CsPbBr3 microplate with a larger bandgap energy. The quantum nature of this heterostructure is reflected from single-photon emission of the composing CsPbBrxI3-x NC, which can also be bulk-like during phase segregation to demonstrate a red shift in the photoluminescence peak that is opposite to the common trend observed in smaller-sized mixed-halide NCs.
RESUMEN
All-inorganic metal halide perovskites (MHPs) have attracted increasing attention because of their high thermal stability and band gap tunability. Among them, CsPbCl3 is considered a promising semiconductor material for visible-ultraviolet dual-band photodetectors because of its excellent photoelectric properties and suitable band gap value. In this work, we fabricated a visible-ultraviolet dual-band photodetector based on a CsPbCl3/p-GaN heterojunction using the spin coating method. The formation of the heterojunction enables the device to exhibit obvious dual-band response behavior at positive and negative bias voltages. At the same time, the dark current of the device can be as low as 2.42 × 10-9 A, and the corresponding detection rate can reach 5.82 × 1010 Jones. In addition, through simulation calculations, it was found that the heterojunction has a type II energy band arrangement, and the heterojunction response band light absorption is significantly enhanced. The type II energy band arrangement will separate electron-hole pairs more effectively, which will help improve device performance. The successful implementation of visible-ultraviolet dual-band photodetectors based on a CsPbCl3/p-GaN heterojunction provides guidance for the application of all-inorganic MHPs in the field of multi-band photodetectors.
RESUMEN
The lead-free halide perovskites possess nontoxicity and excellent chemical stability, whereas relatively weak luminescence intensity limits their potential in practical applications. Therefore, strengthening the luminescence intensity and expanding application fields are urgent tasks for the development of lead-free halide perovskites. In this paper, antimony-doped Cs2NaScCl6 crystals synthesized by a solvothermal method emit bright, deep blue photoluminescence at 447 nm. The photoluminescence (PL), photoluminescence excitation (PLE), and absorption spectra demonstrate that Sb3+ doping effectively activate the intrinsic "dark self-trapped exciton (STE)," leading to an impressive photoluminescence quantum yield (PLQY) value of 78.31% for 1% Sb3+ doping. Furthermore, the luminescence intensity remains above 92% compared with the fresh sample without secondary phases detected even after 90 days under environmental conditions. To expand the emission spectra, rare-earth Sm3+ is further incorporated into Cs2NaScCl6:1% Sb3+ crystals. The results show that Sb ions not only enhance intrinsic STE luminescence but also serve as sensitizers to boost the red-light emission of Sm3+, leading to a significant 500-fold increase in red emission intensity. Finally, the PLQY reaches a stunning 86.78%. These findings provide valuable insights in the design of Sb ion-doped lead-free double perovskites, broadening the application fields in various optoelectronic devices.
RESUMEN
The Rashba effect appears in the semiconductors with an inversion-asymmetric structure and strong spin-orbit coupling, which splits the spin-degenerated band into two sub-bands with opposite spin states. The Rashba effect can not only be used to regulate carrier relaxations, thereby improving the performance of photoelectric devices, but also used to expand the applications of semiconductors in spintronics. In this mini-review, recent research progress on the Rashba effect of two-dimensional (2D) organic-inorganic hybrid perovskites is summarized. The origin and magnitude of Rashba spin splitting, layer-dependent Rashba band splitting of 2D perovskites, the Rashba effect in 2D perovskite quantum dots, a 2D/3D perovskite composite, and 2D-perovskites-based van der Waals heterostructures are discussed. Moreover, applications of the 2D Rashba effect in circularly polarized light detection are reviewed. Finally, future research to modulate the Rashba strength in 2D perovskites is prospected, which is conceived to promote the optoelectronic and spintronic applications of 2D perovskites.
RESUMEN
Various semiconductor devices have been developed based on 2D heterojunction materials owing to their distinctive optoelectronic properties. However, to achieve efficient charge transfer at their interface remains a major challenge. Herein, an alloy heterojunction concept is proposed. The sulfur vacancies in ZnIn2S4 are filled with selenium atoms of PdSe2. This chemically bonded heterojunction can significantly enhance the separation of photocarriers, providing notable advantages in the field of photoelectric conversion. As a demonstration, a two-terminal photodetector based on the PdSe2/ZnIn2S4 heterojunction materials is fabricated. The photodetector exhibits stable operation in ambient conditions, showcasing superior performance in terms of large photocurrent, high responsivity (48.8 mA W-1) and detectivity (1.98 × 1011 Jones). To further validate the excellent optoelectronic performance of the heterojunction, a tri-terminal phototransistor is also fabricated. Benefiting from gate voltage modulation, the photocurrent is amplified to milliampere level, and the responsivity is increased to 229.14 mA W-1. These findings collectively demonstrate the significant potential of the chemically bonded PdSe2/ZnIn2S4 alloy heterojunction for future optoelectronic applications.
RESUMEN
The smart materials with multi-color and stimuli-responsive luminescence are very promising for next generation of optical information encryption and anti-counterfeiting, but these materials are still scarce. Herein, a multi-level information encryption strategy is developed based on the polychromatic emission of Sb-doped double perovskite powders (SDPPs). Cs2NaInCl6:Sb, Cs2KInCl6:Sb, and Cs2AgInCl6:Sb synthesized through coprecipitation methods exhibit broadband emissions with bright blue, cyan, and orange colors, respectively. The information transmitted by specific SDPP is encrypted when different SDPPs are mixed. The confidential information can be decrypted by selecting the corresponding narrowband filter. Then, an encrypted quick response (QR) code with improved security is demonstrated based on this multi-channel selection strategy. Moreover, the three types of SDPPs exhibit three different water-triggered luminescence switching behaviors. The confidential information represented by Cs2NaInCl6:Sb can be erased/recovered through a simple water spray/drying. Whereas, the information collected from the green channel is permanently erased by moisture, which fundamentally avoids information leakage. Therefore, different encryption schemes can be designed to meet a variety of encryption requirements. The multicolor and stimuli-responsive luminescence greatly enrich the flexibility of optical information encryption, which leaps the level of security and confidentiality.
RESUMEN
Neuromorphic visual sensors (NVS) based on photonic synapses hold a significant promise to emulate the human visual system. However, current photonic synapses rely on exquisite engineering of the complex heterogeneous interface to realize learning and memory functions, resulting in high fabrication cost, reduced reliability, high energy consumption and uncompact architecture, severely limiting the up-scaled manufacture, and on-chip integration. Here a photo-memory fundamental based on ion-exciton coupling is innovated to simplify synaptic structure and minimize energy consumption. Due to the intrinsic organic/inorganic interface within the crystal, the photodetector based on monolithic 2D perovskite exhibits a persistent photocurrent lasting about 90 s, enabling versatile synaptic functions. The electrical power consumption per synaptic event is estimated to be≈1.45 × 10-16 J, one order of magnitude lower than that in a natural biological system. Proof-of-concept image preprocessing using the neuromorphic vision sensors enabled by photonic synapse demonstrates 4 times enhancement of classification accuracy. Furthermore, getting rid of the artificial neural network, an expectation-based thresholding model is put forward to mimic the human visual system for facial recognition. This conceptual device unveils a new mechanism to simplify synaptic structure, promising the transformation of the NVS and fostering the emergence of next generation neural networks.
Asunto(s)
Compuestos de Calcio , Redes Neurales de la Computación , Óxidos , Sinapsis , Titanio , Óxidos/química , Titanio/química , Sinapsis/fisiología , Compuestos de Calcio/química , Humanos , Fotones , Visión Ocular/fisiologíaRESUMEN
Matrix metalloproteinase 2 (MMP-2) has been considered a promising molecular biomarker for cancer diagnosis due to its related dysregulation. In this work, a core-satellite structure-powered ratiometric surface-enhanced Raman scattering (SERS) nanosensor with high sensitivity and specificity to MMP-2 was developed. The SERS nanosensor was composed of a magnetic bead encapsulated within a 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB)-labeled gold shell as the capture core and a 4-mercaptobenzonitrile (MBN)-encoded silver nanoparticle as the signal satellite, which were connected through a peptide substrate of MMP-2. MMP-2-triggered cleavage of peptides from the core surface resulted in a decrease of the SERS intensity of MBN. Since the SERS intensity of DTNB was used as an internal standard, the reliable and sensitive quantification of MMP-2 activity would be realized by the ratiometric SERS signal, with a limit of detection as low as 2.067 ng/mL and a dynamic range from 5 to 100 ng/mL. Importantly, the nanosensor enabled a precise determination of MMP-2 activity in tumor cell secretions, which may provide an avenue for early diagnosis and classification of malignant tumors.