RESUMEN
The development of electrode materials with a high specific capacitance, power density, and long-term stability is essential and remains a challenge for developing supercapacitors. Cobalt sulfides (CoS2) are considered one of the most promising and widely studied electrode materials for supercapacitors. Herein, CoS2 and hierarchical porous carbon derived from Pien Tze Huang waste are assembled into a cobalt sulfide/carbon (CoS2/PZH) matrix composite using a one-step hydrothermal method to resolve the challenges of supercapacitors. The resulting CoS2/PZH composite material exhibits a hierarchical porous structure with hollow CoS2 embedded in a PZH framework. The uniform dispersion of the hierarchical porous structure CoS2/PZH is achieved due to the PZH framework, while the uniform decoration of the porous PZH with the hollow CoS2 prevents the PZH from stacking easily. Moreover, the excellent synergistic effect of the hierarchical porous and hollow structure of CoS2/PZH can shorten the electron/ion diffusion channels, expose additional active sites, and provide stable structures for subsequent reactions. As a result, the CoS2/PZH composite material displays a high initial specific capacity of 447.5 F g-1 at 0.5 A g-1, a high energy density of 22.38 W h kg-1, and long-term cycling stability (a retention rate of 92.3% over 10 000 cycles at 5 A g-1).
RESUMEN
Research shows that redox complementarity and synergism among the ingredients of heterogeneous catalysts can enhance the performance of the catalyst. In this research, a porous CuMoO4@Co3O4 nanosheet electrocatalyst is prepared, which is uniformly decorated on nickel foam (NF) by hydrothermal reactions and the impregnation method. The CuMoO4@Co3O4 is an efficient bifunctional catalyst with prominent electrocatalytic activity and durability. It requires overpotentials of only 54 and 251 mV to obtain current densities of 10 and 50 mA cm-2 for the cathodic hydrogen evolution reaction (HER) and the anodic oxygen evolution reaction (OER) in 1.0 mol L-1 KOH, corresponding to Tafel slope values of 98.8 and 87.4 mV dec-1, respectively. Furthermore, the CuMoO4@Co3O4 shows excellent stability of 120 h chronopotentiometry at a current density of 100 mA cm-2 for the HER/OER. Notably, an alkaline electrolyzer (with CuMoO4@Co3O4 as the HER and OER electrodes) can deliver a current density of 10 mA cm-2 at a low voltage of 1.51 V. The catalytic activity of CuMoO4@Co3O4 can be attributed to the structure of the porous nanosheets and the synergistic effect between CuMoO4 and Co3O4.