RESUMEN
The coalescence-induced droplet jumping on superhydrophobic surfaces has extensive application potential in water harvesting, thermal management of electronic devices, and microfluidics. The rational design of the surface structure can influence the interaction between the droplet and the surface, thereby controlling the velocity and direction of the droplet's jumping. In this study, we fabricate the superhydrophobic surface with annular wedge-shaped micropillar arrays, examine the dynamic behavior of condensate droplets on the surface, and measure the temporal and spatial variations of droplet density, average radius, and surface coverage with wedge-shaped micropillars of varying sizes. In addition, the energy analysis of the coalescence-induced droplet jumping reveals that the two primary factors influencing the jumping are the relative size and position of the droplets and micropillars. Further numerical simulations find that the wedge-shaped micropillars cause an asymmetric distribution of pressure within the droplet and at the solid-liquid contact surface, which generates an unbalanced force driving the droplet in the gradient direction of the wedge-shaped micropillar, causing the droplet to jump off the surface with both vertical and gradient-direction velocities. The capacity of the wedge-shaped micropillar surface to transport droplets in the gradient direction increases and then decreases as the relative size of the droplets and micropillars increases. The relative position of the droplet center-of-mass line perpendicular to the bottom edge of the wedge micropillars' trapezoidal shape is more favorable for droplet transport. This work reveals the influence mechanism of surface structure on the velocity and direction of droplet jumping, and the results can guide the microstructure design of superhydrophobic surfaces, which has significant implications for the application of droplet jumping.
RESUMEN
In this work, based on the triboelectric-electromagnetic working principle, a comprehensive strategy appropriately hybridizes a multilayered elastic structure TENG (ME-TENG) and a double-electromagnetic generator (EMG) for efficient aeolian vibration energy harvesting and vibration state monitoring. The ME-TENG with the feature of elasticity is integrated with a movable plate embedded with a magnet as the counterweight, which acts as a spring-like mass system in response to external vibration excitation, making the inseparable integrity of the TENG and EMG. The basic hybridized triboelectric-electromagnetic aeolian vibration generator (HAVG) consisting of ME-TENG and double-EMGs in terms of structural parameters and response characteristics is first optimized and discussed, thereby the efficient vibration energy harvesting and effective vibration state response can be further improved through the mutual complementarity of TENG and EMG. Furthermore, the self-powered capacity of the HAVG in terms of LED arrays and a wireless ambient temperature and humidity monitoring system is verified through the hybrid charging strategy of TENG and EMG modules and the combination of HVAG and energy management circuits, benefiting from the sophisticated-designed structure and excellent output performance of the HAVG. Importantly, a self-powered aeolian vibration monitoring system is established and demonstrated for vibration-state sensing and abnormal vibration alarm. This work demonstrates a novel strategy for energy harvesting and state sensing of overhead transmission line aeolian vibration, which not only reveals TENG-EMG promising potential for energy harvesting for aeolian vibration, but also provides valuable guidance for the construction of a self-powered online-monitoring system for transmission lines.
RESUMEN
HYPOTHESIS: Most droplets on high-efficiency condensing surfaces have radii of less than 100 µm, but conventional droplet transport methods (such as wettability-gradient surfaces and structural-curvature-gradient surfaces) that rely on the unbalanced force of three-phase lines can only transport millimeter-sized droplets efficiently. Regulating high-speed directional transport of condensate droplets is still challenging. Therefore, we present a method for condensate droplet transportation, based on the reaction force of the superhydrophobic saw-tooth surfaces to the liquid bridge, the condensate droplets could be transported at high speed and over long distances. EXPERIMENTS: The superhydrophobic saw-tooth surfaces are fabricated by femtosecond laser ablation and chemical etching. Condensation experiments and luminescent particle characterization experiments on different surfaces are conducted. Aided by the theoretical analysis, we illustrate the remarkable performance of condensate droplet transportation on saw-tooth surfaces. FINDINGS: Compared with conventional methods, our method improves the transport velocity and relative transport distance by 1-2 orders of magnitude and achieves directional transport of the smallest condensate droplet of about 2 µm. Furthermore, the superhydrophobic saw-tooth surfaces enable multi-hop directional jumping of condensate droplets, leading to cross-scale increases in transport distances from microns to decimeters.
RESUMEN
Gallium-based liquid metal is a new class of material that has attracted extensive attention due to its excellent deformation characteristics and great potential in applications. Based on the deformation characteristics of liquid metal droplets, researchers have developed many oscillation systems composed of gallium indium tin alloy (GaInSn) droplet and graphite, or aluminum-doped gallium indium alloy (Al-GaIn24.5) droplet and iron, and so on. Rather than the oxidation and deoxidation mechanisms used in previous systems, an oscillation system that can achieve gallium indium alloy (EGaIn) droplet oscillation with the frequency of 0-29 Hz is designed depending on the interactions between the electric field, pillars, sodium hydroxide, and the droplet. The forces on the droplet are analyzed specifically, which have a great influence on droplet deformation. Additionally, the effects of factors such as voltage, the concentration of sodium hydroxide (NaOH) solution, and droplet size on the droplet oscillation are elucidated based on the force analysis, enabling the flexible control of the oscillation frequency and amplitude of the droplet. This work provides a new perspective on the design of oscillation systems and further enhances our understanding of the deformation of gallium-based liquid metal droplets.
RESUMEN
PURPOSE: Cell-free circulating tumor DNA (ctDNA) in plasma enables rapid and repeat testing of actionable mutations. Next-generation sequencing (NGS) is an attractive platform for multiplex sequencing capabilities compared to traditional methods such as PCR. The purpose of this study is to evaluate the value of the NGS-based ctDNA assay and to identify the genomic alteration profile of ctDNA in real-world Chinese non-small cell lung (NSCLC) patients. METHODS: In total, 294 Chinese patients with pathological diagnosis of Phase III-IV NSCLC were enrolled. 3-4 mL peripheral blood was collected and NGS-based analysis was carried out using a 20-gene panel. The analytical sensitivity and specificity of ctDNA NGS-based assay was validated using droplet digital PCR (ddPCR). RESULTS: We have tested 570 sites from 286 samples using ddPCR, which included 108 positive sites and 462 negative sites from NGS results, and the concordance rate was 99.8% (418/419) for single-nucleotide variants (SNVs) and 96.7% (146/151) for insertions and deletions (InDels). The most frequent genes were TP53 (32%), EGFR (31.97%), KRAS (6.46%), PIK3CA (4.76%), and MET (4.08%). Exon 19 deletion (19del) was the most common alteration in EGFR and G12C was the most common alteration in KRAS. Furthermore, the detection rate of TP53 was higher in the male and patients with squamous cell carcinoma. We also found the prevalence of TP53 in L858R was higher than in 19del (61.29% vs. 40%; p = 0.1115). CONCLUSION: The results indicate that the results of NGS-based ctDNA assay are highly consistent with ddPCR. In Chinese NSCLC patients, TP53 mutation was more frequently associated with male and squamous cell carcinoma. The prevalence of concomitant mutations in L858R may be different from that in 19del.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Carcinoma de Células Escamosas , ADN Tumoral Circulante , Neoplasias Pulmonares , Humanos , Masculino , Biomarcadores de Tumor/genética , Carcinoma de Pulmón de Células no Pequeñas/genética , Carcinoma de Pulmón de Células no Pequeñas/diagnóstico , Carcinoma de Células Escamosas/genética , ADN Tumoral Circulante/genética , Pueblos del Este de Asia , Receptores ErbB/genética , Genómica , Secuenciación de Nucleótidos de Alto Rendimiento/métodos , Neoplasias Pulmonares/patología , Mutación , Proteínas Proto-Oncogénicas p21(ras)/genética , FemeninoRESUMEN
Coalescence-induced droplet jumping could promote self-removal of droplets, which has broad potential in related fields such as heat-transfer enhancement, self-cleaning, energy harvesting, electricity generation, radiative cooling, and antifrosting/icing. In practical applications, droplets often have initial velocity under external forces. In this work, the coalescence-induced jumping of centripetal moving droplets on a superhydrophobic plane is experimentally observed using a high-speed photography platform, and the effects of the initial velocity of the moving droplet on jumping velocity, energy conversion, and droplet morphology are numerically investigated. Results show that the jumping velocity decreases and then increases as the We number of the moving droplet increases. The main source of the total kinetic energy of the coalesced droplet switches from the released surface energy to the initial kinetic energy of the moving droplet with the increasing We number, but the proportion of the jumping kinetic energy to the total kinetic energy decreases. Besides, the initial velocity of the moving droplet intensifies the droplet deformation and accelerates the process of coalescence-induced jumping. Through theoretical analysis, it is found that the jumping velocity is affected by two mechanisms: the deformation intensification and the liquid bridge impact enhancement.
RESUMEN
HYPOTHESIS: Due to the complex hydrodynamics of droplet impact on ridged superhydrophobic surfaces, quantitative droplet spreading characteristics are unrevealed, limiting the practical applications of ridged superhydrophobic surfaces. During droplet impacting, the size ratio (the ratio of the ridge diameter to the droplet diameter) is an important factor that affects droplet spreading dynamics. EXPERIMENTS: We fabricated ridged superhydrophobic surfaces with size ratios ranging from zero to one, and conduct water droplet impact experiments on these surfaces at varied Weber numbers. Aided by the numerical simulations and theoretical analysis, we illustrate the droplet spreading dynamics and reveal the law on the maximum axial spreading coefficient. FINDS: The results show that the droplet spreading and retraction dynamics on ridged superhydrophobic surfaces are significantly asymmetric in the axial and spanwise directions. Focusing on the maximum axial spreading coefficient, we find it decreases first and then increases with increasing size ratios, indicating the existence of the critical size ratio. The maximum axial spreading coefficient can be reduced by 25-40% at the critical size ratio compared with that on flat surfaces. To predict the maximum axial spreading coefficient, two theoretical models are proposed respectively for size ratios smaller and larger than the critical size ratio.
RESUMEN
Urban development has significantly modified the surface thermal environment in urban areas. This study provides the first attempt to characterize the urban development imprint on surface thermal environment for 323 cities across the entire country of China, using an intra-urban perspective. Specifically, it investigates the variation of surface thermal environment in terms of land surface temperature (LST) difference triggered by significant urban evolution of intra-urban division containing two primary classes: old urban areas developed by 1992 and new ones expanded in the 1992-2015 period. Under this "old-new" dichotomy, the relationship between urban development and the LST difference is explored through Multi-scale Geographically Weighted Regression (MGWR). Results reveal that urban development is closely related to the difference in LST between old and new urban areas in 2015, which varies from -2.66 °C to 2.46 °C, up to -6.27 °C in western China. 264 cities manifest relatively "cooler" urban environments in the generally larger-sized new urban areas. The seven selected urban development indicators can explain 75% of the variance in the LST difference through MGWR. Among them, the old-new elevation difference, the normalized difference vegetation index (NDVI) difference, and Gini coefficient are found to influence the LST difference in various spatially varying manners. The elevation difference, a generally underestimated nature-driven indicator, is found dominant in explaining the LST difference for 252 cities, among which 216 cities demonstrate higher LSTs in the urban areas with lower elevations. Overall, this study provides valuable information of human-environment interaction across many cities in a generalized way, which complements similar studies at local level, and helps to depict a complete picture of environmental impacts of urban development. The integrated workflow can also be promoted to other periods or other countries to examine the corresponding urbanization imprint on intra-urban surface warming.
RESUMEN
HYPOTHESIS: Jumping of coalesced droplets on superhydrophobic surfaces (SHSs) is widely used for enhanced condensation, anti-icing/frosting, and self-cleaning due to its superior droplet transport capability. However, because only a tiny fraction (about 5%) of the released excess surface energy during coalescence can be transformed into jumping kinetic energy, the jumping is very weak, limiting its application. METHODS: We experimentally propose enhanced jumping methods, use machine learning to design structures that achieve ultimate jumping, and finally combine experiments and simulations to investigate the mechanism of the enhanced jumping. FINDING: We find that a more orderly flow inside the droplets through the structure is the key to improve energy transfer efficiency and that the egg tray-like structure enables the droplet to jump with an energy transfer efficiency 10.6 times higher than that of jumping on flat surfaces. This energy transfer efficiency is very close to the theoretical limit, i.e., almost all the released excess surface energy is transformed into jumping kinetic energy after overcoming viscous dissipation. The ultimate jumping enhances the application of water droplet jumping and enables other low surface energy fluid such as R22, R134a, Gasoline, and Ethanol, which cannot jump on a flat surface, to jump.
RESUMEN
Local warming induced by rapid urbanization has been threatening residents' health, raising significant concerns among urban planners. Local climate zone (LCZ), a widely accepted approach to reclassify the urban area, which is helpful to propose planning strategies for mitigating local warming, has been well documented in recent years. Based on the LCZ framework, many scholars have carried out diversified extensions in urban zoning research in recent years, in which urban functional zone (UFZ) is a typical perspective because it directly takes into account the impacts of human activities. UFZs, widely used in urban planning and management, were chosen as the basic unit of this study to explore the spatial heterogeneity in the relationship between landscape composition, urban morphology, urban functions, and land surface temperature (LST). Global regression including ordinary least square regression (OLS) and random forest regression (RF) were used to model the landscape-LST correlations to screen indicators to participate in following spatial regression. The spatial regression including semi-parametric geographically weighted regression (SGWR) and multiscale geographically weighted regression (MGWR) were applied to investigate the spatial heterogeneity in landscape-LST among different types of UFZ and within each UFZ. Urban two-dimensional (2D) morphology indicators including building density (BD); three-dimensional (3D) morphology indicators including building height (BH), building volume density (BVD), and sky view factor (SVF); and other indicators including albedo and normalized difference vegetation index (NDVI) and impervious surface fraction (ISF) were used as potential landscape drivers for LST. The results show significant spatial heterogeneity in the Landscape-LST relationship across UFZs, but the spatial heterogeneity is not obvious within specific UFZs. The significant impact of urban morphology on LST was observed in six types of UFZs representing urban built up areas including Residential (R), Urban village (UV), Administration and Public Services (APS), Commercial and Business Facilities (CBF), Industrial and Manufacturing (IM), and Logistics and Warehouse (LW). Specifically, a significant correlation between urban 3D morphology indicators and LST in CBF was discovered. Based on the results, we propose different planning strategies to settle the local warming problems for each UFZ. In general, this research reveals UFZs to be an appropriate operational scale for analyzing LST on an urban scale.
Asunto(s)
Planificación de Ciudades , Monitoreo del Ambiente , Calor , Ciudades , Humanos , Temperatura , UrbanizaciónRESUMEN
Conspicuous expansion and intensification of impervious surfaces accompanied by rapid urbanization are widely recognized to have exerted evident impacts on the urban thermal environment. Investigating the spatially and temporally varying relationships between Land Surface Temperature (LST) and impervious surfaces (IS) at multiple scales is of great significance for steering IS expansion and intensification. This study proposes an analytical framework to investigate the spatiotemporal variations of LST and its responses to IS in Wuhan, China at both city scale and sub-region scale. The summer LST patterns in 2002-2017 are extracted by Multi-Task Gaussian Process (MTGP) model from raw 8-day synthesized MODerate-resolution Imaging Spectroradiometer (MODIS) LST data. At the city scale, the weighted center of LST (LSTWC) and impervious surface fraction (ISFWC), multi-temporal trajectories and coupling indicators are utilized to comprehensively examine the spatial and temporal dynamics of LST and IS within Wuhan. At the sub-region scale, urban heat island ratio index (URI), impervious surfaces contribution index (ISCI) and sprawl rate are introduced for further quantifying the relationships of LST and IS. The results reveal that IS and hot thermal landscapes expanded by 407.43 km2 and 255.82 km2 in Wuhan in 2002-2017 at city scale. The trajectories of LSTWCs and ISFWCs are visually coherent and both heading to southeast direction in general. At the sub-region scale, the specific cardinal directions with the highest ISCI variations are examined to be the exact directions of ISFWC trajectories in 2002-2017. The results reveal that the spatiotemporal variations of LST and IS are highly correlated at both city and sub-region scales within Wuhan, thus testifying the significance of steering IS expansion and renewal for controlling urban thermal environment deterioration.
Asunto(s)
Monitoreo del Ambiente/métodos , Calor , Urbanización , China , Ciudades , Imágenes SatelitalesRESUMEN
The essential characteristic of the self-propelled jumping droplet is the jumping velocity, which determines its application value in heat transfer enhancement, antifrosting, self-cleaning, and so on. The jumping velocity is directly related to the energy conversion efficiency (i.e., the ratio of jumping kinetic energy surface energy released by coalescence to surface energy released by coalescence) and it is affected by the initial state of droplets but there is no unified theory to describe the relationship between the initial state of droplets and the energy conversion efficiency. In this paper, the projection of the initial chemical potential and the final chemical potential difference of droplets in the direction of jumping is defined as jumping potential by theoretical analysis of the chemical potential evolution. The effects of droplet number, distribution, and radius ratio on energy conversion efficiency can be synthetically characterized by jumping potential. The larger the jumping potential is, the higher the energy conversion efficiency is. Finally, the rationality and universality of the jumping potential are verified by numerical simulations and comparison with previous studies. The jumping potential can explain phenomena that cannot be explained in previous studies and can provide a synthesis critical value of droplet jumping.