All-Optical Nanosensor for Displacement Detection in Mechanical Applications.

In this paper, we propose the design of an optical system based on two parallel suspended silicon nanowires that support a range of optical resonances that efficiently confine and scatter light in the infrared range as the base of an all-optical displacement sensor. The effects of the variation of the distance between the nanowires are analyzed. The simulation models are designed by COMSOL Multiphysics software, which is based on the finite element method. The diameter of the nanocylinders (d = 140 nm) was previously optimized to achieve resonances at the operating wavelengths (λ = 1064 nm and 1310 nm). The results pointed out that a detectable change in their resonant behavior and optical interaction was achieved. The proposed design aims to use a simple light source using a commercial diode laser and simplify the readout systems with a high sensitivity of 1.1 × 106 V/m2 and 1.14 × 106 V/m2 at 1064 nm and 1310 nm, respectively. The results may provide an opportunity to investigate alternative designs of displacement sensors from an all-optical approach and explore their potential use.

Tripling the light extraction efficiency of a deep ultraviolet LED using a nanostructured p-contact.

Despite a wide array of applications, deep ultra-violet light emitting diodes offer relatively poor efficiencies compared to their optical counterparts. A contributing factor is the lower light extraction efficiency due to both highly absorbing p-contacts and total internal reflection. Here, we propose a structure consisting of a hexagonal periodic array of cylindrical nanoholes in the multi-layered p-contact which are filled with platinum. This nanostructure reduces the absorption of the p-contact layer, leading to a higher emission into the n-contact compared to a planar reference. An optimum geometry of the nanostructure allows a light extraction efficiency of 15.0%, much higher than the typical 4.6% of a planar reference. While the nanostructure strongly decreases the light absorption in the p-contact, it is still not able to considerably reduce the total internal reflection. Consequently, the nanostructured p-contact should be combined with other optical strategies, such as nanopatterned sapphire substrates to increase the efficiency even further. Despite this, the nanostructure described in this work provides a readily realizable path to enhancing the light extraction efficiency of state-of-the-art deep ultra-violet light emitting diodes.

Light absorption enhancement in thin film GaAs solar cells using dielectric nanoparticles.

Cost-effective and lightweight solar cells are currently demanded in strategic fields such as space applications or integrated-wearable devices. A reduction of the active layer thickness, producing thin-film devices, has been a traditional solution to accomplish both requirements. However, this solution also reduces the efficiency of the device. For this reason, alternative strategies are being proposed. In this work, light trapping effects of an array of semiconductor nanoparticles located on the top surface of a thin-film GaAs solar cell are investigated to improve the optical absorption and current density in active layer, under the standard AM-1.5 solar spectrum. The numerical results are compared with other previous proposals such as an aluminum nanoparticle array, as well as conventional solar cells with and without a standard anti-reflective coating (ARC). The inclusion of semiconductor nanoparticles (NPs) shows an improved response of the solar cells at different angles of incidence in comparison to solar cell with an ARC. Furthermore, the efficiency increases a 10% respect to the aluminum nanoparticles (NPs) architecture, and a 21% and a 30% respect to solar cells with and without ARC, respectively.

A monolithic nanostructured-perovskite/silicon tandem solar cell: feasibility of light management through geometry and materials selection.

The use of several layers of different materials, taking advantage of their complementary bandgap energies, improves the absorption in multi-junction solar cells. Unfortunately, the inherent efficiency increment of this strategy has a limitation: each interface introduces optical losses. In this paper, we study the effects of materials and geometry in the optical performance of a nanostructured hybrid perovskite - silicon tandem solar cell. Our proposed design increases the performance of both subcells by managing light towards the active layer, as well as by minimizing reflections losses in the interfaces. We sweep both refractive index and thickness of the transport layers and the dielectric spacer composing the metasurface, obtaining a range of these parameters for the proper operation of the device. Using these values, we obtain a reduction in the optical losses, in particular they are more than a 33% lower than those of a planar cell, mainly due to a reduction of the reflectivity in the device. This approach leads to an enhancement in the optical response, widens the possibilities for the manufacturers to use different materials, and allows wide geometrical tolerances.

Efficient Light Management in a Monolithic Tandem Perovskite/Silicon Solar Cell by Using a Hybrid Metasurface.

Solar energy is now dealing with the challenge of overcoming the Shockley-Queisser limit of single bandgap solar cells. Multilayer solar cells are a promising solution as the so-called third generation of solar cells. The combination of materials with different bandgap energies in multijunction cells enables power conversion efficiencies up to 30% at reasonable costs. However, interfaces between different layers are critical due to optical losses. In this work, we propose a hybrid metasurface in a monolithic perovskite-silicon solar cell. The design takes advantage of light management to optimize the absorption in the perovskite, as well as an efficient light guiding towards the silicon subcell. Furthermore, we have also included the effect of a textured back contact. The optimum proposal provides an enhancement of the matched short-circuit current density of a 20.5% respect to the used planar reference.

Toroidal metasurface resonances in microwave waveguides.

We theoretically investigate the possibility to load microwave waveguides with dielectric particle arrays that emulate the properties of infinite, two-dimensional, all-dielectric metasurfaces. First, we study the scattering properties and the electric and magnetic multipole modes of dielectric cuboids and identify the conditions for the excitation of the so-called anapole state. Based on the obtained results, we design metasurfaces composed of a square lattice of dielectric cuboids, which exhibit strong toroidal resonances. Then, three standard microwave waveguide types, namely parallel-plate waveguides, rectangular waveguides, and microstrip lines, loaded with dielectric cuboids are designed, in such a way that they exhibit the same resonant features as the equivalent dielectric metasurface. The analysis shows that parallel-plate and rectangular waveguides can almost perfectly reproduce the metasurface properties at the resonant frequency. The main attributes of such resonances are also observed in the case of a standard impedance-matched microstrip line, which is loaded with only a small number of dielectric particles. The results demonstrate the potential for a novel paradigm in the design of "metasurface-loaded" microwave waveguides, either as functional elements in microwave circuitry, or as a platform for the experimental study of the properties of dielectric metasurfaces.

Analysis of the Substrate Effect on the Zero-Backward Scattering Condition of a Cu2O Nanoparticle under Non-Normal Illumination.

The presence of a substrate is one of the most important limitations of the real application of the directional conditions. These conditions allow the control of the spatial distribution of light scattering of nanoparticles. While the zero-forward condition is quite sensitive to any change of the surrounding medium, like the substrate, the zero-backward scattering seems to be less sensitive and very stable under normal illumination. In this letter, the zero-backward scattering condition was investigated on a homogenous Cu2O spherical subwavelength particle, both theoretically and experimentally. In particular, the influence of the substrate and the impinging direction on the angular distribution of light scattering under this directional condition were studied. We observed that the zero-backward scattering condition was also sensitive to the presence of a substrate beneath when a non-normal illumination was considered. We believe that our finding is quite interesting from a practical point of view and for the real implementation of directional scattering in various applications like cloaking, light-emitting devices, photovoltaic devices, bio-sensing, and many more.

Anapole Modes in Hollow Nanocuboid Dielectric Metasurfaces for Refractometric Sensing.

This work proposes the use of the refractive index sensitivity of non-radiating anapole modes of high-refractive-index nanoparticles arranged in planar metasurfaces as a novel sensing principle. The spectral position of anapole modes excited in hollow silicon nanocuboids is first investigated as a function of the nanocuboid geometry. Then, nanostructured metasurfaces of periodic arrays of nanocuboids on a glass substrate are designed. The metasurface parameters are properly selected such that a resonance with ultrahigh Q-factor, above one million, is excited at the target infrared wavelength of 1.55 µm. The anapole-induced resonant wavelength depends on the refractive index of the analyte superstratum, exhibiting a sensitivity of up to 180 nm/RIU. Such values, combined with the ultrahigh Q-factor, allow for refractometric sensing with very low detection limits in a broad range of refractive indices. Besides the sensing applications, the proposed device can also open new venues in other research fields, such as non-linear optics, optical switches, and optical communications.

Wireless Temperature Sensor Based on a Nematic Liquid Crystal Cell as Variable Capacitance.

Wireless communication is growing quickly and now allows technologies like the Internet of Things (IoT). It is included in many smart sensors helping to reduce the installation and system costs. These sensors increase flexibility, simplify deployment and address a new set of applications that was previously impossible with a wired approach. In this work, a wireless temperature sensor based on a nematic liquid crystal as variable capacitance is proposed as a proof of concept for potential wearable applications. Performance analysis of the wireless temperature sensor has been carried out and a simple equivalent circuit has been proposed. Sensor prototype has been successfully fabricated and demonstrated as the beginning of new biomedical sensors.

Selective Dielectric Metasurfaces Based on Directional Conditions of Silicon Nanopillars.

Dielectric metasurfaces based on high refractive index materials have been proposed recently. This type of structure has several advantages over their metallic counterparts. In this work, we demonstrate that dielectric metasurfaces can be theoretically designed satisfying Kerker's zero-forward condition. This is the first time that a dielectric metasurface based on this principle has been designed. A selective dielectric metasurface of silicon nanopillars is designed to work at 632.8 nm. This structure could work both as a dielectric mirror and a reject band filter. Furthermore, by scaling up the structure, it could be possible to manufacture a terahertz (THz) dielectric mirror.

Light scattering by subwavelength Cu2O particles.

Novel metamaterials with new capabilities to manipulate light may be used by considering basic building blocks with new optical properties. This is the case with resonant magneto-dielectric particles. In this work, the resonant response of a high-dielectric Cu2O subwavelength particle is analyzed, both analytically and experimentally. The emergence of electric and magnetic resonances and their interferential effects, producing directional behaviors, can be used in a new generation of metamaterials, as well as new integrated optical devices.

Liquid Crystal Microlenses for Autostereoscopic Displays.

Three-dimensional vision has acquired great importance in the audiovisual industry in the past ten years. Despite this, the first generation of autostereoscopic displays failed to generate enough consumer excitement. Some reasons are little 3D content and performance issues. For this reason, an exponential increase in three-dimensional vision research has occurred in the last few years. In this review, a study of the historical impact of the most important technologies has been performed. This study is carried out in terms of research manuscripts per year. The results reveal that research on spatial multiplexing technique is increasing considerably and today is the most studied. For this reason, the state of the art of this technique is presented. The use of microlenses seems to be the most successful method to obtain autostereoscopic vision. When they are fabricated with liquid crystal materials, extended capabilities are produced. Among the numerous techniques for manufacturing liquid crystal microlenses, this review covers the most viable designs for its use in autostereoscopic displays. For this reason, some of the most important topologies and their relation with autostereoscopic displays are presented. Finally, the challenges in some recent applications, such as portable devices, and the future of three-dimensional displays based on liquid crystal microlenses are outlined.

Thermally tunable polarization by nanoparticle plasmonic resonance in photonic crystal fibers.

A photonic crystal fiber selectively filled with silver nanoparticles dispersed in polydimethylsiloxane has been numerically studied via finite elements analysis. These nanoparticles possess a localized surface plasmon resonance in the visible region which depends on the refractive index of the surrounding medium. The refractive index of polydimethylsiloxane can be thermally tuned leading to the design of polarization tunable filters. Filters found with this setup show anisotropic attenuation of the x-polarization fundamental mode around α(x) = 1200dB/cm remarkably higher than the y-polarization mode. Moreover, high fiber birefringence and birefringence reversal is observed in the spectral region of the plasmon.

Temperature-phase converter based on a LC cell as a variable capacitance.

The main characteristic of liquid crystals is that their properties, both electrical and optical, can be modified through a convenient applied signal, for instance a certain voltage. This tunable behavior of liquid crystals is directly related to the orientation of their nanometric components with respect to a director direction. However, the initial alignment is a fabrication-dependent parameter and may be either planar or homeotropic. In addition, the strong dependence of the properties of liquid crystals with the temperature is well known and widely used for several temperature sensors. This dependence is produced by the influence of the temperature on the ordering of the molecules. In this work, we have studied the temperature dependence of the electric properties of a liquid crystal cell, in particular the dielectric permittivity, with the temperature as a function of the initial alignment set during the fabrication process. Starting from experimental measurements, an equivalent circuit model including the temperature dependence has been proposed. We have observed that a good linearity in a wide temperature range is provided at a suitable exciting frequency. Finally, a proper conditioner circuit is proposed as a powerful tool for linear and high sensibility temperature measurement.

Liquid Crystal Lensacons, Logarithmic and Linear Axicons.

Until now, several attempts have been made to obtain axicons by using liquid crystals. Previous results had always a considerable deviation from the linear response and the resulting aperture is square. In addition, classical fabrications methods are expensive and only produce fixed phase profiles. In this study, a novel structure to obtain tunable axicons with a perfect conical shape and a circular aperture is proposed and theoretically studied. The proposed optical device is based on nematic liquid crystal and phase shifted electrical signals. A simulation program consisted of Finite Elements Method to solve the voltage distribution combined with the Frank-Oseen equation to solve the molecular position of the nematic liquid crystal is employed. This device is totally reconfigurable by using low voltage signals. The focus depth and the position of this one can be controlled electrically.

Directional Scattering of Semiconductor Nanoparticles Embedded in a Liquid Crystal.

Light scattering by semiconductor nanoparticles has been shown to be more complex than was believed until now. Both electric and magnetic responses emerge in the visible range. In addition, directional effects on light scattering of these nanoparticles were recently obtained. In particular, zero backward and minimum-forward scattering are observed. These phenomena are very interesting for several applications such as, for instance, optical switches or modulators. The strong dependence of these phenomena on the properties of both the particle and the surrounding medium can be used to tune them. The electrical control on the optical properties of liquid crystals could be used to control the directional effects of embedded semiconductor nanoparticles. In this work, we theoretically analyze the effects on the directional distribution of light scattering by these particles when the refractive index of a surrounded liquid crystal changes from the ordinary to the extraordinary configuration. Several semiconductor materials and liquid crystals are studied in order to optimize the contrast between the two states.

Sensing with magnetic dipolar resonances in semiconductor nanospheres.

In this work we propose two novel sensing principles of detection that exploit the magnetic dipolar Mie resonance in high-refractive-index dielectric nanospheres. In particular, we theoretically investigate the spectral evolution of the extinction and scattering cross sections of these nanospheres as a function of the refractive index of the external medium (next). Unlike resonances in plasmonic nanospheres, the spectral position of magnetic resonances in high-refractive-index nanospheres barely shifts as next changes. Nevertheless, there is a drastic reduction in the extinction cross section of the nanospheres when next increases, especially in the magnetic dipolar spectral region, which is accompanied with remarkable variations in the radiation patterns. Thanks to these changes, we propose two new sensing parameters, which are based on the detection of: i) the intensity variations in the transmitted or backscattered radiation by the dielectric nanospheres at the magnetic dipole resonant frequency, and ii) the changes in the radiation pattern at the frequency that satisfies Kerker's condition of near-zero forward radiation. To optimize the sensitivity, we consider several semiconductor materials and particles sizes.

Linear polarization degree for detecting magnetic properties of small particles.

Motivated by the recent advances with magnetic nanoparticles, in this research we propose a new technique for their characterization based on the measurement of certain polarimetric parameters of the scattered light, such as the linear polarization degree when it is determined at a "right-angle" scattering configuration. We will show the sensitivity of its spectral evolution with the magnetic properties of the particle.

Light scattering by an array of electric and magnetic nanoparticles.

Light scattering by an array of alternating electric and magnetic nanoparticles is analyzed in detailed. Specific geometrical conditions are derived, where such an array behaves like double-negative particles, leading to a suppression of the backscattered intensity. This effect is very robust and could be used to produce double-negative metamaterials using single-negative components.