Data Mining and Fusion Framework for In-Home Monitoring Applications.

Sensor Data Fusion (SDT) algorithms and models have been widely used in diverse applications. One of the main challenges of SDT includes how to deal with heterogeneous and complex datasets with different formats. The present work utilised both homogenous and heterogeneous datasets to propose a novel SDT framework. It compares data mining-based fusion software packages such as RapidMiner Studio, Anaconda, Weka, and Orange, and proposes a data fusion framework suitable for in-home applications. A total of 574 privacy-friendly (binary) images and 1722 datasets gleaned from thermal and Radar sensing solutions, respectively, were fused using the software packages on instances of homogeneous and heterogeneous data aggregation. Experimental results indicated that the proposed fusion framework achieved an average Classification Accuracy of 84.7% and 95.7% on homogeneous and heterogeneous datasets, respectively, with the help of data mining and machine learning models such as Naïve Bayes, Decision Tree, Neural Network, Random Forest, Stochastic Gradient Descent, Support Vector Machine, and CN2 Induction. Further evaluation of the Sensor Data Fusion framework based on cross-validation of features indicated average values of 94.4% for Classification Accuracy, 95.7% for Precision, and 96.4% for Recall. The novelty of the proposed framework includes cost and timesaving advantages for data labelling and preparation, and feature extraction.

Predicting Activity Duration in Smart Sensing Environments Using Synthetic Data and Partial Least Squares Regression: The Case of Dementia Patients.

The accurate recognition of activities is fundamental for following up on the health progress of people with dementia (PwD), thereby supporting subsequent diagnosis and treatments. When monitoring the activities of daily living (ADLs), it is feasible to detect behaviour patterns, parse out the disease evolution, and consequently provide effective and timely assistance. However, this task is affected by uncertainties derived from the differences in smart home configurations and the way in which each person undertakes the ADLs. One adjacent pathway is to train a supervised classification algorithm using large-sized datasets; nonetheless, obtaining real-world data is costly and characterized by a challenging recruiting research process. The resulting activity data is then small and may not capture each person's intrinsic properties. Simulation approaches have risen as an alternative efficient choice, but synthetic data can be significantly dissimilar compared to real data. Hence, this paper proposes the application of Partial Least Squares Regression (PLSR) to approximate the real activity duration of various ADLs based on synthetic observations. First, the real activity duration of each ADL is initially contrasted with the one derived from an intelligent environment simulator. Following this, different PLSR models were evaluated for estimating real activity duration based on synthetic variables. A case study including eight ADLs was considered to validate the proposed approach. The results revealed that simulated and real observations are significantly different in some ADLs (p-value < 0.05), nevertheless synthetic variables can be further modified to predict the real activity duration with high accuracy (R2(pred)>90%).

Fuzzy System to Assess Dangerous Driving: A Multidisciplinary Approach.

Dangerous driving can cause accidents, injuries and loss of life. An efficient assessment helps to identify the absence or degree of dangerous driving to take the appropriate decisions while driving. Previous studies assess dangerous driving through two approaches: (i) using electronic devices or sensors that provide objective variables (acceleration, turns and speed), and (ii) analyzing responses to questionnaires from behavioral science that provide subjective variables (driving thoughts, opinions and perceptions from the driver). However, we believe that a holistic and more realistic assessment requires a combination of both types of variables. Therefore, we propose a three-phase fuzzy system with a multidisciplinary (computer science and behavioral sciences) approach that draws on the strengths of sensors embedded in smartphones and questionnaires to evaluate driver behavior and social desirability. Our proposal combines objective and subjective variables while mitigating the weaknesses of the disciplines used (sensor reading errors and lack of honesty from respondents, respectively). The methods used are of proven reliability in each discipline, and their outputs feed a combined fuzzy system used to handle the vagueness of the input variables, obtaining a personalized result for each driver. The results obtained using the proposed system in a real scenario were efficient at 84.21%, and were validated with mobility experts' opinions. The presented fuzzy system can support intelligent transportation systems, driving safety, or personnel selection.

A Novel Integration of IF-DEMATEL and TOPSIS for the Classifier Selection Problem in Assistive Technology Adoption for People with Dementia.

The classifier selection problem in Assistive Technology Adoption refers to selecting the classification algorithms that have the best performance in predicting the adoption of technology, and is often addressed through measuring different single performance indicators. Satisfactory classifier selection can help in reducing time and costs involved in the technology adoption process. As there are multiple criteria from different domains and several candidate classification algorithms, the classifier selection process is now a problem that can be addressed using Multiple-Criteria Decision-Making (MCDM) methods. This paper proposes a novel approach to address the classifier selection problem by integrating Intuitionistic Fuzzy Sets (IFS), Decision Making Trial and Evaluation Laboratory (DEMATEL), and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The step-by-step procedure behind this application is as follows. First, IF-DEMATEL was used for estimating the criteria and sub-criteria weights considering uncertainty. This method was also employed to evaluate the interrelations among classifier selection criteria. Finally, a modified TOPSIS was applied to generate an overall suitability index per classifier so that the most effective ones can be selected. The proposed approach was validated using a real-world case study concerning the adoption of a mobile-based reminding solution by People with Dementia (PwD). The outputs allow public health managers to accurately identify whether PwD can adopt an assistive technology which results in (i) reduced cost overruns due to wrong classification, (ii) improved quality of life of adopters, and (iii) rapid deployment of intervention alternatives for non-adopters.

Fusion of Unobtrusive Sensing Solutions for Sprained Ankle Rehabilitation Exercises Monitoring in Home Environments.

The ability to monitor Sprained Ankle Rehabilitation Exercises (SPAREs) in home environments can help therapists ascertain if exercises have been performed as prescribed. Whilst wearable devices have been shown to provide advantages such as high accuracy and precision during monitoring activities, disadvantages such as limited battery life and users' inability to remember to charge and wear the devices are often the challenges for their usage. In addition, video cameras, which are notable for high frame rates and granularity, are not privacy-friendly. Therefore, this paper proposes the use and fusion of privacy-friendly and Unobtrusive Sensing Solutions (USSs) for data collection and processing during SPAREs in home environments. The present work aims to monitor SPAREs such as dorsiflexion, plantarflexion, inversion, and eversion using radar and thermal sensors. The main contributions of this paper include (i) privacy-friendly monitoring of SPAREs in a home environment, (ii) fusion of SPAREs data from homogeneous and heterogeneous USSs, and (iii) analysis and comparison of results from single, homogeneous, and heterogeneous USSs. Experimental results indicated the advantages of using heterogeneous USSs and data fusion. Cluster-based analysis of data gleaned from the sensors indicated an average classification accuracy of 96.9% with Neural Network, AdaBoost, and Support Vector Machine, amongst others.

The "Worktivity" mHealth intervention to reduce sedentary behaviour in the workplace: a feasibility cluster randomised controlled pilot study.

BACKGROUND: Office work generally consists of high amounts of sedentary behaviour (SB) which has been associated with negative health consequences. We developed the "WorktivIty" mobile app to help office workers reduce their SB through self-monitoring and feedback on sedentary time, prompts to break sedentary time, and educational facts. The aim of this paper is to report the feasibility of delivering the Worktivity intervention to desk-based office workers in the workplace setting and describe methodological considerations for a future trial. METHODS: We conducted a three-arm feasibility cluster randomised controlled pilot study over an 8-week period with full time-desk based employees. Clustered randomisation was to one of three groups: Worktivity mobile app (MA; n = 20), Worktivity mobile app plus SSWD (MA+SSWD; n = 20), or Control (C; n = 16). Feasibility was assessed using measures of recruitment and retention, intervention engagement, intervention delivery, completion rates and usable data, adverse events, and acceptability. RESULTS: Recruitment of companies to participate in this study was challenging (8% of those contacted), but retention of individual participants within the recruited groups was high (81% C, 90% MA + SSWD, 95% MA). Office workers' engagement with the app was moderate (on average 59%). Intervention delivery was partially compromised due to diminishing user engagement and technical issues related to educational fact delivery. Sufficient amounts of useable data were collected, however either missing or unusable data were observed with activPAL™, with data loss increasing at each follow up time point. No serious adverse events were identified during the study. The majority of participants agreed that the intervention could be implemented within the workplace setting (65% MA; 72% MA + SSWD) but overall satisfaction with the intervention was modest (58% MA; 39% MA + SSWD). CONCLUSIONS: The findings suggest that, in principle, it is feasible to implement a mobile app-based intervention in the workplace setting however the Worktivity intervention requires further technical refinements before moving to effectiveness trials. Challenges relating to the initial recruitment of workplaces and maintaining user engagement with the mHealth intervention over time need to be addressed prior to future large-scale implementation. Further research is needed to identify how best to overcome these challenges.

Design and Implementation of a Smart Home in a Box to Monitor the Wellbeing of Residents With Dementia in Care Homes.

There is a global challenge related to the increasing number of People with Dementia (PwD) and the diminishing capacity of governments, health systems, and caregivers to provide the best care for them. Cost-effective technology solutions that enable and ensure a good quality of life for PwD via monitoring and interventions have been investigated comprehensively in the literature. The objective of this study was to investigate the challenges with the design and deployment of a Smart Home In a Box (SHIB) approach to monitoring PwD wellbeing within a care home. This could then support future SHIB implementations to have an adequate and prompt deployment allowing research to focus on the data collection and analysis aspects. An important consideration was that most care homes do not have the appropriate infrastructure for installing and using ambient sensors. The SHIB was evaluated via installation in the rooms of PwD with varying degrees of dementia at Kirk House Care Home in Belfast. Sensors from the SHIB were installed to test their capabilities for detecting Activities of Daily Living (ADLs). The sensors used were: (i) thermal sensors, (ii) contact sensors, (iii) Passive Infrared (PIR) sensors, and (iv) audio level sensors. Data from the sensors were collected, stored, and handled using a 'SensorCentral' data platform. The results of this study highlight challenges and opportunities that should be considered when designing and implementing a SHIB approach in a dementia care home. Lessons learned from this investigation are presented in addition to recommendations that could support monitoring the wellbeing of PwD. The main findings of this study are: (i) most care home buildings were not originally designed to appropriately install ambient sensors, and (ii) installation of SHIB sensors should be adapted depending on the specific case of the care home where they will be installed. It was acknowledged that in addition to care homes, the homes of PwD were also not designed for an appropriate integration with ambient sensors. This study provided the community with useful lessons, that will continue to be applied to improve future implementations of the SHIB approach.

Gait Activity Classification on Unbalanced Data from Inertial Sensors Using Shallow and Deep Learning.

Activity recognition is one of the most active areas of research in ubiquitous computing. In particular, gait activity recognition is useful to identify various risk factors in people's health that are directly related to their physical activity. One of the issues in activity recognition, and gait in particular, is that often datasets are unbalanced (i.e., the distribution of classes is not uniform), and due to this disparity, the models tend to categorize into the class with more instances. In the present study, two methods for classifying gait activities using accelerometer and gyroscope data from a large-scale public dataset were evaluated and compared. The gait activities in this dataset are: (i) going down an incline, (ii) going up an incline, (iii) walking on level ground, (iv) going down stairs, and (v) going up stairs. The proposed methods are based on conventional (shallow) and deep learning techniques. In addition, data were evaluated from three data treatments: original unbalanced data, sampled data, and augmented data. The latter was based on the generation of synthetic data according to segmented gait data. The best results were obtained with classifiers built with augmented data, with F-measure results of 0.812 (σ = 0.078) for the shallow learning approach, and of 0.927 (σ = 0.033) for the deep learning approach. In addition, the data augmentation strategy proposed to deal with the unbalanced problem resulted in increased classification performance using both techniques.

Iterative four-phase development of a theory-based digital behaviour change intervention to reduce occupational sedentary behaviour.

INTRODUCTION: As high amounts of occupational sitting have been associated with negative health consequences, designing workplace interventions to reduce sedentary behaviour (SB) is of public health interest. Digital technology may serve as a cost-effective and scalable platform to deliver such an intervention. This study describes the iterative development of a theory-based, digital behaviour change intervention to reduce occupational SB. METHODS: The behaviour change wheel and The Behaviour Change Technique Taxonomy were used to guide the intervention design process and form a basis for selecting the intervention components. The development process consisted of four phases: phase 1 - preliminary research, phase 2 - consensus workshops, phase 3 - white boarding and phase 4 - usability testing. RESULTS: The process led to the development and refinement of a smartphone application - Worktivity. The core component was self-monitoring and feedback of SB at work, complemented by additional features focusing on goal setting, prompts and reminders to break up prolonged periods of sitting, and educational facts and tips. Key features of the app included simple data entry and personalisation based on each individual's self-reported sitting time. Results from the 'think-aloud' interviews (n=5) suggest Worktivity was well accepted and that users were positive about its features. CONCLUSION: This study led to the development of Worktivity, a theory-based and user-informed mobile app intervention to reduce occupational SB. It is the first app of its kind developed with the primary aim of reducing occupational SB using digital self-monitoring. This paper provides a template to guide others in the development and evaluation of technology-supported behaviour change interventions.

Implementing and measuring person-centredness using an APP for knowledge transfer: the iMPAKT app.

OBJECTIVE: The aim of the study was to evaluate a technological solution in the form of an App to implement and measure person-centredness in nursing. The focus was to enhance the knowledge transfer of a set of person-centred key performance indicators and the corresponding measurement framework used to inform improvements in the experience of care. DESIGN: The study used an evaluation approach derived from the work of the Medical Research Council to assess the feasibility of the App and establish the degree to which the App was meeting the aims set out in the development phase. Evaluation data were collected using focus groups (n = 7) and semi-structured interviews (n = 7) to capture the impact of processes experienced by participating sites. SETTING: The study was conducted in the UK and Australia in two organizations, across 11 participating sites. PARTICIPANTS: 22 nurses from 11 sites in two large health care organizations were recruited on a voluntary basis. INTERVENTION: Implementing the KPIs and measurement framework via the APP through two cycles of data collection. MAIN OUTCOME MEASURES: The main outcome was to establish feasibility in the use of the App. RESULTS: The majority of nurse/midwife participants found the App easy to use. There was broad consensus that the App was an effective method to measure the patient experience and generated clear, concise reports in real time. CONCLUSIONS: The implementation of the person-centred key performance indicators using the App enhanced the generation of meaningful data to evidence patient experience across a range of different clinical settings.

Semi-Automated Data Labeling for Activity Recognition in Pervasive Healthcare.

Activity recognition, a key component in pervasive healthcare monitoring, relies on classification algorithms that require labeled data of individuals performing the activity of interest to train accurate models. Labeling data can be performed in a lab setting where an individual enacts the activity under controlled conditions. The ubiquity of mobile and wearable sensors allows the collection of large datasets from individuals performing activities in naturalistic conditions. Gathering accurate data labels for activity recognition is typically an expensive and time-consuming process. In this paper we present two novel approaches for semi-automated online data labeling performed by the individual executing the activity of interest. The approaches have been designed to address two of the limitations of self-annotation: (i) The burden on the user performing and annotating the activity, and (ii) the lack of accuracy due to the user labeling the data minutes or hours after the completion of an activity. The first approach is based on the recognition of subtle finger gestures performed in response to a data-labeling query. The second approach focuses on labeling activities that have an auditory manifestation and uses a classifier to have an initial estimation of the activity, and a conversational agent to ask the participant for clarification or for additional data. Both approaches are described, evaluated in controlled experiments to assess their feasibility and their advantages and limitations are discussed. Results show that while both studies have limitations, they achieve 80% to 90% precision.

A Thermal Imaging Solution for Early Detection of Pre-ulcerative Diabetic Hotspots.

Foot ulcers are a common complication of diabetes and are the leading cause of amputation amongst those with diabetes. Research has shown that, an increase of two degrees Celsius in the skin temperature on the plantar surface of the foot can be an early indication of injury or inflammation. Early detection and treatment of a hotspot region may reduce the risk of an ulcer developing. This paper presents a thermography-based approach for detecting temperature hotspots on the foot. The system comprises a bespoke application and a thermal camera attachment which captures RGB images and a temperature matrix. Web-based services process the captured data and detect whether any regions of higher temperature are present on the foot, in comparison to the other foot. The accuracy of this system has been verified through a pilot study. Hotspots were simulated on the feet of 10 healthy participants. The results indicated that hotspots were correctly detected for 60% of the participants. We discuss some reasons why the results were inaccurate for the remaining four participants. Furthermore, we also suggest some potential enhancements to the system with the aim of increasing the precision of the results.