Method development and validation for the determination of sulfites and sulfates on the surface of mineral atmospheric samples using reverse-phase liquid chromatography.

Earlier studies suggest that SO2 gas reacts at the surface of mineral dust and forms sulfites or bisulfites, which are then converted to sulfates. In order to monitor and quantify the amounts of both sulfites and sulfates formed on the surface of mineral dusts of volcanic and desert origins an accurate and precise reversed-phase liquid chromatography method was developed and validated to extract, stabilize and individually analyze sulfites and sulfates initially present on the surface of dusts exposed to SO2. The method was developed on a 25 mm Restek Ultra Column C18, Particle size: 5 µm, I.D. 4.60 mm column which was dynamically coated with 1.0 mM cetylpyridinium chloride in 7% acetonitrile solution to produce a charged surface as recommended in the literature. Mobile phase used: 1 mM Potassium Hydrogen Phthalate at pH 6.5 at a flow rate of 1.0 ml/min with negative UV-Vis detection at 255 nm in 15 min. The method was validated for specificity, linearity and range, injection repeatability, stability, robustness, limit of detection and limit of quantitation, and sample preparation and extraction reproducibility. The method was adapted for straight sulfite and sulfate quantification: (i) of environmental samples, and (ii) natural samples additionally exposed to SO2 gas in a dedicated laboratory setup. The method was then successfully applied to quantify sulfites and sulfates on natural volcanic and a desert dust samples both collected in the environment and additionally exposed to SO2 gas in the laboratory. The method can be efficiently used to identify sulfites and sulfates on fresh volcanic ash following an eruption, on aeolian desert dust exposed to industrial pollutants, as well as for laboratory investigations of sulfite and sulfate formation on the surface of minerals and natural dusts of different origins.

Development and validation of a thermally regulated atmospheric simulation chamber (THALAMOS): A versatile tool to simulate atmospheric processes.

Atmospheric simulation chambers, are unique tools for investigating atmospheric processes in the gas and heterogeneous phases. They can provide a controlled yet realistic environment that simulates atmospheric conditions. In the current study, a Teflon atmospheric simulation chamber of 600 L, named THALAMOS (thermally regulated atmospheric simulation chamber) has been developed and cross-validated. THALAMOS can be operated over the temperature range 233 to 373 K under both static and flow conditions. It is equipped with state of the art instrumentation (selective ion flow tube mass spectrometry (SIFT-MS), long path Fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectrometry (GC-MS), various analyzers) for the in-line monitoring of both reactants and products. THALAMOS was validated by measuring the rate coefficients of well documented reactions, i.e. the reaction of ethanol with OH radicals and the reaction of dichloromethane with Cl atoms, in a wide temperature range. Two different detection techniques were used in parallel, FTIR and SIFT-MS, to internally cross-validate the obtained results. The measured rate coefficients are in excellent agreement, both between each other and with the literature recommended values. Furthermore, the gas phase oxidation of toluene by Cl atoms (kinetics and product yields) was studied in the temperature range of 253 to 333 K. To the best of our knowledge, THALAMOS is a unique facility on national level and among a few smog chambers internationally that can be operated in such a wide temperature range providing the scientific community with a versatile tool to simulate both outdoor and indoor physicochemical processes.

Heterogeneous Interaction of Isopropanol with Natural Gobi Dust.

The adsorption of isopropanol on Gobi dust was investigated in the temperature (T) and relative humidity (RH) ranges of 273-348 K and <0.01-70%, respectively, using zero air as bath gas. The kinetic measurements were performed using a novel experimental setup combining Fourier-Transform InfraRed spectroscopy (FTIR) and selected-ion flow-tube mass spectrometry (SIFT-MS) for gas-phase monitoring. The initial uptake coefficient, γ0, of isopropanol was measured as a function of several parameters (concentration, temperature, relative humidity, dust mass). γ0 was found independent of temperature while it was inversely dependent on relative humidity according to the empirical expression: γ0 = 5.37 × 10-7/(0.77+RH0.6). Furthermore, the adsorption isotherms of isopropanol were determined and the results were simulated with the Langmuir adsorption model to obtain the partitioning constant, KLin, as a function of temperature and relative humidity according to the expressions: KLin = (1.1 ± 0.3) × 10-2 exp [(1764 ± 132)/T] and KLin = 15.75/(3.21+RH1.77). Beside the kinetics, a detailed product study was conducted under UV irradiation conditions (350-420 nm) in a photochemical reactor. Acetone, formaldehyde, acetic acid, acetaldehyde, carbon dioxide, and water were identified as gas-phase products. Besides, the surface products were extracted and analyzed employing HPLC; Hydroxyacetone, formaldehyde, acetaldehyde, acetone, and methylglyoxal were identified as surface products while the formation of several other compounds were observed but were not identified. Moreover, the photoactivation of the surface was verified employing diffuse reflectance infrared fourier transform spectroscopy (DRIFTs).

Development of a sampling method for the simultaneous monitoring of straight-chain alkanes, straight-chain saturated carbonyl compounds and monoterpenes in remote areas.

Studies have shown that biogenic compounds, long chain secondary compounds and long lifetime anthropogenic compounds are involved in the formation of organic aerosols in both polluted areas and remote places. This work aims at developing an active sampling method to monitor these compounds (i.e. 6 straight-chain saturated aldehydes from C6 to C11; 8 straight-chain alkanes from C9 to C16; 6 monoterpenes: α-pinene, ß-pinene, camphene, limonene, α-terpinene, & γ-terpinene; and 5 aromatic compounds: toluene, ethylbenzene, meta-, para- and ortho-xylenes) in remote areas. Samples are collected onto multi-bed sorbent cartridges at 200 mL min(-1) flow rate, using the automatic sampler SyPAC (TERA-Environnement, Crolles, France). No breakthrough was observed for sampling volumes up to 120 L (standard mixture at ambient temperature, with a relative humidity of 75%). As ozone has been shown to alter the samples (losses of 90% of aldehydes and up to 95% of terpenes were observed), the addition of a conditioned manganese dioxide (MnO(2)) scrubber to the system has been validated (full recovery of the affected compounds for a standard mixture at 50% relative humidity--RH). Samples are first thermodesorbed and then analysed by GC/FID/MS. This method allows suitable detection limits (from 2 ppt for camphene to 13 ppt for octanal--36 L sampled), and reproducibility (from 1% for toluene to 22% for heptanal). It has been successfully used to determine the diurnal variation of the target compounds (six 3 h samples a day) during winter and summer measurement campaigns at a remote site in the south of France.