Comprehensive antifungal investigation of green synthesized silver nanoformulation against four agriculturally significant fungi and its cytotoxic applications.

The present study reports the green synthesis of silver nanoparticles (AgNPs) in powder form using the leaf extract of Azadirachta indica. The synthesis of AgNPs was confirmed by UV-vis spectroscopy, FTIR, XRD, FESEM, and EDX. The synthesized AgNPs were in a powdered state and dispersed completely in 5% polyethylene glycol (PEG) and demonstrated prolonged shelf life and enhanced bioavailability over a year without any aggregation. The resulting silver nanoformulation demonstrated complete inhibition against Sclerotinia sclerotiorum and Colletotrichum falcatum and 68% to 80% inhibition against Colletotrichum gloeosporioides and Rhizoctonia solani respectively, at 2000 ppm. The EC50 values determined through a statistical analysis were 66.42, 157.7, 19.06, and 33.30 ppm for S. sclerotiorum, C. falcatum, C. gloeosporioides, and R. solani respectively. The silver nanoformulation also established significant cytotoxicity, with a 74.96% inhibition rate against the human glioblastoma cell line U87MG at 250 ppm. The IC50 value for the cancerous cell lines was determined to be 56.87 ppm through statistical analysis. The proposed silver nanoformulation may be used as a next-generation fungicide in crop improvement and may also find application in anticancer investigations. To the best of our knowledge, this is also the first report of silver nanoformulation demonstrating complete inhibition against the economically significant phytopathogen C. falcatum.

Metal nanoparticles to improve the heat resilience in wheat (Triticum aestivumL.).

This study evaluated the efficacy of phytogenic silver and zinc nanoparticles in improving heat resilience in various wheat varieties. The silver and zinc nanoparticles were synthesized using plant leaf extract and characterized using various techniques. Four wheat varieties (DBW187, Black Wheat, DBW 50, and PBW 621) were subjected to field trials. The random block design was used, and nanoparticles in different concentrations were applied at various growth stages and morphologically, and yield parameters were recorded. UV-vis spectroscopy spectral analysis showed peaks for Ag nanoparticles at 420 nm wavelength and Zn nanoparticles at 240 and 350 nm wavelength, depicting the preliminary confirmation of nanoparticle synthesis. Electron microscopic analysis (TEM and SEM) provided morphological insights and confirmed synthesis of fine-sized particle mostly in a range between 10 and 60 nm. Energy dispersive x-ray analysis confirmed the elemental composition of the synthesized nanoparticles, with Ag and Zn elements detected in their respective samples. It also confirmed the oxide nature of synthesized ZnNPs. Dynamic light scattering analysis provided size distribution profiles, indicating average sizes of approximately 61.8 nm for Ag nanoparticles and 46.5 nm for Zn nanoparticles. The concentrations of Ag and Zn nanoparticles in the samples were found to be 196.3 ppm and 115.14 ppm, respectively, through atomic absorption spectroscopic analysis. Fourier transform infrared spectroscopy analysis revealed characteristic functional groups present in the nanoparticles. The results of field experiments established that Ag nanoparticles at 75 ppm concentration exhibited the most significant enhancements in plant growth. Conversely, Zn nanoparticles at a 100 ppm concentration demonstrated the most substantial improvements in the growth and yield of heat-stressed wheat varieties. The study concludes that optimized concentrations of silver and zinc nanoparticles can effectively improve heat stress resilience in wheat. These findings are promising to enhance abiotic stress resilience in crops.

Nanobiotics against antimicrobial resistance: harnessing the power of nanoscale materials and technologies.

Given the spasmodic increment in antimicrobial resistance (AMR), world is on the verge of "post-antibiotic era". It is anticipated that current SARS-CoV2 pandemic would worsen the situation in future, mainly due to the lack of new/next generation of antimicrobials. In this context, nanoscale materials with antimicrobial potential have a great promise to treat deadly pathogens. These functional materials are uniquely positioned to effectively interfere with the bacterial systems and augment biofilm penetration. Most importantly, the core substance, surface chemistry, shape, and size of nanomaterials define their efficacy while avoiding the development of AMR. Here, we review the mechanisms of AMR and emerging applications of nanoscale functional materials as an excellent substitute for conventional antibiotics. We discuss the potential, promises, challenges and prospects of nanobiotics to combat AMR.

Evaluation of efficacy of Phyto-synthesized iron oxide nanoparticles in contributing drought resilience in wheat (Triticum aestivumL.).

Wheat is the majorly cultivated staple crop worldwide. The world witnesses a great percentage of yield loss of wheat due to drought stress. The present study aimed at evaluating the efficacy of phytosynthesized iron oxide nanoparticles (FeONPs) in contributing to drought resilience in wheat (Triticum aestivumL.) under rain-fed conditions. FeONPs were biosynthesized by using leaf extract ofProsopis cinerariaas a reducing and capping agent. The synthesized nanoparticles were characterized to evaluate the structural and biochemical aspects. The FeONPs were found to be irregularly spherical in shape with a mean size of 42.6 nm. The concentration of nanoparticles in the sample was found to be 164.01 mg l-1. An experimental setup was laid out in a randomized-plot design with 3 replications for Rabi season 2020-2021. Five dosages of nanoparticles were prepared as 12.5, 25, 50, 75 and 100 ppm from the stock solution. The wheat crop varieties grown in the field were subjected to a total of 3 treatments; Nanopriming, foliar application of FeONPs at seedling development stage (20 DAS), and tillering stage (30 DAS). Plants that were not treated with NPs were considered as control. No irrigation regime was followed as the effect of NPs on the crop was to be assessed under rain-fed conditions only. Plant growth parameters were recorded. The obtained results revealed that the application of FeONPs positively affected all the morphological and yield attributes in the wheat crop. The highest concentrations used were found to be most effective and showed a significantly pronounced effect as compared to the control atp≤ 0.05. The study concluded that the FeONPs can contribute to drought resilience in wheat.

Genetics of spot blotch resistance in bread wheat (Triticum aestivum L.) using five models for GWAS.

Genetic architecture of resistance to spot blotch in wheat was examined using a Genome-Wide Association Study (GWAS) involving an association panel comprising 303 diverse genotypes. The association panel was evaluated at two different locations in India including Banaras Hindu University (BHU), Varanasi (Uttar Pradesh), and Borlaug Institute for South Asia (BISA), Pusa, Samastipur (Bihar) for two consecutive years (2017-2018 and 2018-2019), thus making four environments (E1, BHU 2017-18; E2, BHU 2018-19; E3, PUSA, 2017-18; E4, PUSA, 2018-19). The panel was genotyped for 12,196 SNPs based on DArT-seq (outsourced to DArT Ltd by CIMMYT); these SNPs included 5,400 SNPs, which could not be assigned to individual chromosomes and were therefore, described as unassigned by the vendor. Phenotypic data was recorded on the following three disease-related traits: (i) Area Under Disease Progress Curve (AUDPC), (ii) Incubation Period (IP), and (iii) Lesion Number (LN). GWAS was conducted using each of five different models, which included two single-locus models (CMLM and SUPER) and three multi-locus models (MLMM, FarmCPU, and BLINK). This exercise gave 306 MTAs, but only 89 MTAs (33 for AUDPC, 30 for IP and 26 for LN) including a solitary MTA detected using all the five models and 88 identified using four of the five models (barring SUPER) were considered to be important. These were used for further analysis, which included identification of candidate genes (CGs) and their annotation. A majority of these MTAs were novel. Only 70 of the 89 MTAs were assigned to individual chromosomes; the remaining 19 MTAs belonged to unassigned SNPs, for which chromosomes were not known. Seven MTAs were selected on the basis of minimum P value, number of models, number of environments and location on chromosomes with respect to QTLs reported earlier. These 7 MTAs, which included five main effect MTAs and two for epistatic interactions, were considered to be important for marker-assisted selection (MAS). The present study thus improved our understanding of the genetics of resistance against spot blotch in wheat and provided seven MTAs, which may be used for MAS after due validation.

WheatQTLdb V2.0: a supplement to the database for wheat QTL.

We recently developed a database for hexaploid wheat QTL (WheatQTLdb; www.wheatqtldb.net), which included 11,552 QTL affecting various traits of economic importance. However, that database did not include valuable QTL from other wheat species and/or progenitors of hexaploid wheat. Therefore, an updated and improved version of wheat QTL database (WheatQTLdb V2.0) was developed, which now includes information on hexaploid wheat (Triticum aestivum) and the following seven other related species: T. durum, T. turgidum, T. dicoccoides, T. dicoccum, T. monococcum, T. boeoticum, and Aegilops tauschii. WheatQTLdb V2.0 includes a much-improved list of QTL, including 27,518 main effect QTL, 202 epistatic QTL, and 1321 metaQTL. This newly released WheatQTLdb V2.0 also has additional valuable options to search and choose the QTL, category-wise, and trait-wise data for their use in research or breeding programs.

WheatQTLdb: a QTL database for wheat.

During the last three decades, QTL analysis in wheat has been conducted for a variety of individual traits, so that thousands of QTL along with the linked markers, their genetic positions and contribution to phenotypic variation (PV) for concerned traits are now known. However, no exhaustive database for wheat QTL is currently available at a single platform. Therefore, the present database was prepared which is an exhaustive information resource for wheat QTL data from the published literature till May, 2020. QTL data from both interval mapping and genome-wide association studies (GWAS) have been included for the following classes of traits: (i) morphological traits, (ii) N and P use efficiency, (iii) traits for biofortification (Fe, K, Se, and Zn contents), (iv) tolerance to abiotic stresses including drought, water logging, heat stress, pre-harvest sprouting and salinity, (v) resistance to biotic stresses including those due to bacterial, fungal, nematode and insects, (vi) quality traits, and (vii) a variety of physiological traits, (viii) developmental traits, and (ix) yield and its related traits. For the preparation of the database, literature was searched for data on QTL/marker-trait associations (MTAs), curated and then assembled in the form of WheatQTLdb. The available information on metaQTL, epistatic QTL and candidate genes, wherever available, is also included in the database. Information on QTL in this WheatQTLdb includes QTL names, traits, associated markers, parental genotypes, crosses/mapping populations, association mapping panels and other useful information. To our knowledge, WheatQTLdb prepared by us is the largest collection of QTL (11,552), epistatic QTL (107) and metaQTL (330) data for hexaploid wheat to be used by geneticists and plant breeders for further studies involving fine mapping, cloning, and marker-assisted selection (MAS) during wheat breeding.