MTFR2 accelerates hepatocellular carcinoma mediated by metabolic reprogramming via the Akt signaling pathway.

Metabolic reprogramming has recently been identified as a hallmark of malignancies. The shift from oxidative phosphorylation to glycolysis in hepatocellular carcinoma (HCC) meets the demands of rapid cell growth and provides a microenvironment for tumor progression. This study sought to uncover the function and mechanism of MTFR2 in the metabolic reprogramming of HCC. Elevated MTFR2 expression was associated with poor patient prognosis. Downregulation of MTFR2 blocked malignant behaviors, epithelial-to-mesenchymal transition (EMT), and glycolysis in HCC cells. Nuclear transcription factor Y subunit gamma (NFYC) was also associated with poor patient prognosis, and NFYC bound to the promoter of MTFR2 to activate transcription and promote Akt signaling. The repressive effects of NFYC knockdown on EMT and glycolysis in HCC cells were compromised by MTFR2 overexpression, elicited through the activation of the Akt signaling. Knockdown of NFYC slowed the growth and intrahepatic metastasis in vivo, which was reversed by MTFR2 overexpression. In conclusion, our work shows that activation of MTFR2 by the transcription factor NFYC promotes Akt signaling, thereby potentiating metabolic reprogramming in HCC development. Targeting the NFYC/MTFR2/Akt axis may represent a therapeutic strategy for HCC.

Evaluation of a novel PET tracer [18F]-Florbetazine for Alzheimer's disease diagnosis and ß-amyloid deposition quantification.

[18F]-Florbetazine ([18F]-92) is a selective PET tracer for ß-amyloid (Aß) depositions with a novel diaryl-azine scaffold to reduce lipophilicity and to achieve higher gray-to-white matter contrast. We aimed to assess its diagnostic value in Alzheimer's disease (AD) and pharmacokinetics characteristics in human subjects. METHODS: Six healthy controls (HCs) and nine AD patients underwent dynamic PET examination with [18F]-Florbetazine and a structural MRI scan. The time-activity-curves (TACs) for volumes of interest (VOIs) in cerebral cortex, cerebellar cortex and cerebral white matter was depicted and their standardized uptake value ratios (SUVRs) with cerebellar cortex as reference were compared between HCs and AD patients. The cerebral gray-to-white matter SUV ratio (GWR) was also calculated. RESULTS: In HCs, radioactivities in the cerebral cortex VOIs were homogeneously low and at the same level as in cerebellar cortex, while in AD patients, cortical VOIs expected to contain Aß exhibited high radioactivity. Cerebral cortex SUVRs remain relatively low in HCs while keep increasing along with time in AD patients. After 15 min, the cerebral cortex SUVRs became significant higher in AD patients compared to HCs with 100 % discrimination accuracy. In AD patients, GWR remained over 1.3 for all time intervals and visual inspection showed lower uptake in cerebral white matter compared to cerebral cortex. CONCLUSION: [18F]-Florbetazine PET showed high uptake on Aß plaques and high gray-to-white contrast in AD patients that are favorable in visual read. [18F]-Florbetazine can be potentially used for detection and quantification of Aß depositions in the living human brain.

The long road for vaccine development with difficulties and hopes.

The R21/Matrix-M malaria vaccine (which has an overall protection rate of 75%) was listed as a pre-qualified vaccine by the World Health Organization (WHO) in December 2023; as such, it is the second malaria vaccine to be authenticated by WHO after pre-qualification of the RTS, S/AS01 (overall protection rate = 55.1%,both vaccines are designed to target the circumsporozoite protein (CSP). R21 features a higher density of CSP epitopes on its surface, requiring a lower dosage than RTS,S. However, without direct comparative trials, it remains unclear which vaccine is superior.) vaccine in July 2022 [1-3].Attempts to develop an effective vaccine for malaria, one of the most severe parasitic diseases in human history, have been ongoing since the 1960s; however, the huge and complicated Plasmodium genome, the intricate life cycle of the parasite, and the diverse human immune responses that it triggers, have made this task extremely difficult.

Construction of a Spatial-Confined Self-Stacking Catalytic Circuit for Rapid and Sensitive Imaging of Piwi-Interacting RNA in Living Cells.

Piwi-interacting RNAs (piRNAs) are small noncoding RNAs that repress transposable elements to maintain genome integrity. The canonical catalytic hairpin assembly (CHA) circuit relies on random collisions of free-diffused reactant probes, which substantially slow down reaction efficiency and kinetics. Herein, we demonstrate the construction of a spatial-confined self-stacking catalytic circuit for rapid and sensitive imaging of piRNA in living cells based on intramolecular and intermolecular hybridization-accelerated CHA. We rationally design a 3WJ probe that not only accelerates the reaction kinetics by increasing the local concentration of reactant probes but also eliminates background signal leakage caused by cross-entanglement of preassembled probes. This strategy achieves high sensitivity and good specificity with shortened assay time. It can quantify intracellular piRNA expression at a single-cell level, discriminate piRNA expression in tissues of breast cancer patients and healthy persons, and in situ image piRNA in living cells, offering a new approach for early diagnosis and postoperative monitoring.

Highly conductive and stretchable nanostructured ionogels for 3D printing capacitive sensors with superior performance.

Ionogels are promising material candidates for ionotronics due to their excellent ionic conductivity, stretchability, and thermal stability. However, it is challenging to develop 3D printable ionogels with both excellent electrical and mechanical properties. Here, we report a highly conductive and stretchable nanostructured (CSN) ionogel for 3D printing ionotronic sensors. We propose the photopolymerization-induced microphase separation strategy to prepare the CSN ionogels comprising continuous conducting nanochannels intertwined with cross-linked polymeric framework. The resultant CSN ionogels simultaneously achieves high ionic conductivity (over 3 S m-1), high stretchability (over 1500%), low degree of hysteresis (0.4% at 50% strain), wide-temperature-range thermostability (-72 to 250 °C). Moreover, its high compatible with DLP 3D printing enables the fabrication of complex ionogel micro-architectures with high resolution (up to 5 µm), which allows us to manufacture capacitive sensors with superior sensing performances. The proposed CSN ionogel paves an efficient way to manufacture the next-generation capacitive sensors with enhanced performance.

Establishment and verification of novel TNM staging system for lung mucinous adenocarcinoma.

BACKGROUND: Lung adenocarcinoma is a high-mortality rate cancer. Within this category, Lung mucinous adenocarcinoma (LMAC) is a rare and distinct subtype of lung adenocarcinoma necessitating further investigation. The study was launched to compare the difference of survival features between LMAC and lung non-mucinous adenocarcinoma (LNMAC) and to investigate the significance and demand for developing a new staging system tailored to LMAC. METHODS: This retrospective study assessed the suitableness of the current staging system for LMAC. It compared the overall survival (OS) between LMAC and LNMAC from 2004 to 2020 (LNMAC: 160,387; LMAC: 6,341) and instituted a novel classification framework for LMAC based on US population. Verification group consisting of patients from two Chinese medical centers from 2010 to 2018 (n = 392) was set to ascertain the applicability of this novel system. The primary endpoint was OS. To minimize the bias, propensity score match (PSM) was employed. Survival analysis and Log-rank test were executed to explore the survival features of LMAC. RESULTS: The results indicated that the existed staging system was not suitable for LMAC. Patients diagnosed with LMAC exhibited a superior OS compared to those with LNMAC in stage IA2 (P < 0.0001), IA3 (P < 0.0001), IB (P = 0.0062), IIA (P = 0.0090), IIB (P = 0.0005). In contrast, a worse OS in stage IVA (P = 0.0103) was found in LMAC patients. The novel classification system proposed for LMAC proved to be highly applicable and demonstrated substantial efficacy, as confirmed by the verification group. CONCLUSION: The newly established classification system was more effective for LMAC, but it necessitates large-scale verification to confirm its applicability and reliability.

Origami-Enhanced Mechanical Properties for Worm-Like Robot.

In recent years, the exploration of worm-like robots has garnered much attention for their adaptability in confined environments. However, current designs face challenges in fully utilizing the mechanical properties of structures/materials to replicate the superior performance of real worms. In this article, we propose an approach to address this limitation based on the stacked Miura origami structure, achieving the seamless integration of structural design, mechanical properties, and robotic functionalities, that is, the mechanical properties originate from the geometric design of the origami structure and at the same time serve the locomotion capability of the robot. Three major advantages of our design are: the implementation of origami technology facilitates a more accessible and convenient fabrication process for segmented robotic skin with periodicity and flexibility, as well as robotic bristles with anchoring effect; the utilization of the Poisson's ratio effect for deformation amplification; and the incorporation of localized folding motion for continuous peristaltic locomotion. Utilizing the high geometric designability inherent in origami, our robot demonstrates customizable morphing and quantifiable mechanical properties. Based on the origami worm-like robot prototype, we experimentally verified the effectiveness of the proposed design in realizing the deformation amplification effect and localized folding motion. By comparing this to a conventional worm-like robot with discontinuous deformation, we highlight the merits of these mechanical properties in enhancing the robot's mobility. To sum up, this article showcases a bottom-up approach to robot development, including geometric design, mechanical characterization, and functionality realization, presenting a unique perspective for advancing the development of bioinspired soft robots.

Seed development-related genes contribute to high yield heterosis in integrated utilization of elite autotetraploid and neo-tetraploid rice.

Introduction: Autotetraploid rice holds high resistance to abiotic stress and substantial promise for yield increase, but it could not be commercially used because of low fertility. Thus, our team developed neo-tetraploid rice with high fertility and hybrid vigor when crossed with indica autotetraploid rice. Despite these advances, the molecular mechanisms underlying this heterosis remain poorly understood. Methods: An elite indica autotetraploid rice line (HD11) was used to cross with neo-tetraploid rice, and 34 hybrids were obtained to evaluate agronomic traits related to yield. WE-CLSM, RNA-seq, and CRISPR/Cas9 were employed to observe endosperm structure and identify candidate genes from two represent hybrids. Results and discussion: These hybrids showed high seed setting and an approximately 55% increase in 1000-grain weight, some of which achieved grain yields comparable to those of the diploid rice variety. The endosperm observations indicated that the starch grains in the hybrids were more compact than those in paternal lines. A total of 119 seed heterosis related genes (SHRGs) with different expressions were identified, which might contribute to high 1000-grain weight heterosis in neo-tetraploid hybrids. Among them, 12 genes had been found to regulate grain weight formation, including OsFl3, ONAC023, OsNAC024, ONAC025, ONAC026, RAG2, FLO4, FLO11, OsISA1, OsNF-YB1, NF-YC12, and OsYUC9. Haplotype analyses of these 12 genes revealed the various effects on grain weight among different haplotypes. The hybrids could polymerize more dominant haplotypes of above grain weight regulators than any homozygous cultivar. Moreover, two SHRGs (OsFl3 and SHRG2) mutants displayed a significant reduction in 1000-grain weight and an increase in grain chalkiness, indicating that OsFl3 and SHRG2 positively regulate grain weight. Our research has identified a valuable indica autotetraploid germplasm for generating strong yield heterosis in combination with neo-tetraploid lines and gaining molecular insights into the regulatory processes of heterosis in tetraploid rice.

Lectin Receptor-Like Protein Kinase OsNRFG6 is Required for Embryo Sac Development and Fertilization in Neo-Tetraploid Rice.

Great yield-enhancing prospects of autotetraploid rice was restricted by various polyploidy-induced reproductive dysfunction. To surmount these challenges, our group has generated a series of valuable fertile tetraploid lines (denoted as neo-tetraploid rice) through 20-year efforts. With this context, a G-type lectin receptor-like kinase, OsNRFG6, was identified as a pivotal factor associated with reproductive regulation in neo-tetraploid rice. Nevertheless, it is still elusive about a comprehensive understanding of its precise functional roles and underlying molecular mechanisms during reproduction of neo-tetraploid rice. Here, we demonstrated that OsNRFG6 executed a constitutive expression pattern and encoded proteins localizing in perinucleus and endoplasmic reticulum. Subsequently, four independent mutant lines of OsNRFG6 within neo-tetraploid rice background were further identified, all displaying low seed-setting rate due to abortive embryo sacs and defective double fertilization. RNA-seq and RT-qPCR revealed a significant down-regulation of OsNRFG6 and female reproductive genes such as OsMEL1 and LOG in ovaries prior to and post-fertilization, attributing this effect to OsNRFG6 mutation. Furthermore, through yeast-two hybrids, bimolecular fluorescence complementation assays, and luciferase complementation imaging assays, it was determined that OsNRFG6 could interact with itself and two female reproductive proteins (LOG and OsDES1) to form protein complexes. These results elucidate the reproductive functions and molecular pathway governed by OsNRFG6 in regulating fertility of neo-tetraploid rice, offering insights into molecular understanding of fertility improvement in polyploid rice.

Cytomegalovirus pneumonia with intermittent pulmonary hemorrhage leading to asphyxia death: a case report and literature review.

Neonatal pulmonary hemorrhage is a late manifestation of various diseases. Premature delivery and low body weight are frequently observed as high-risk factors, characterized by acute onset, rapid progression, and high mortality rates. Pulmonary hemorrhage caused by cytomegalovirus infection in newborns with normal immune function is a rare occurrence. This case report focuses on a term neonate with normal birth weight who presented solely with nasal obstruction shortly after birth. However, 4 days after birth, the newborn experienced a sudden onset of blood gushing from both the mouth and nasal cavity. The patient was diagnosed with gastrointestinal bleeding, neonatal pneumonia and neonatal lung consolidation. And he was discharged after ten days of symptomatic treatment. However, upon returning home, the patient experienced a sudden onset of bleeding from the mouth and nose, leading to his untimely demise. Subsequent autopsy revealed the presence of pulmonary hemorrhage in newborn, which presented as interstitial pneumonia. The cause of pulmonary hemorrhage is cytomegalovirus infection. This case emphasizes the importance of pediatricians enhancing their skills in differentiating pulmonary hemorrhage, especially from cytomegalovirus pneumonia.

Reconfigurable 4D printing via mechanically robust covalent adaptable network shape memory polymer.

4D printing enables 3D printed structures to change shape over "time" in response to environmental stimulus. Because of relatively high modulus, shape memory polymers (SMPs) have been widely used for 4D printing. However, most SMPs for 4D printing are thermosets, which only have one permanent shape. Despite the efforts that implement covalent adaptable networks (CANs) into SMPs to achieve shape reconfigurability, weak thermomechanical properties of the current CAN-SMPs exclude them from practical applications. Here, we report reconfigurable 4D printing via mechanically robust CAN-SMPs (MRC-SMPs), which have high deformability at both programming and reconfiguration temperatures (>1400%), high Tg (75°C), and high room temperature modulus (1.06 GPa). The high printability for DLP high-resolution 3D printing allows MRC-SMPs to create highly complex SMP 3D structures that can be reconfigured multiple times under large deformation. The demonstrations show that the reconfigurable 4D printing allows one printed SMP structure to fulfill multiple tasks.

Effects of deep brain stimulation on dopamine D2 receptor binding in patients with treatment-refractory depression.

BACKGROUND: Depression is a chronic psychiatric disorder related to diminished dopaminergic neurotransmission. Deep brain stimulation (DBS) has shown effectiveness in treating patients with treatment-refractory depression (TRD). This study aimed to evaluate the effect of DBS on dopamine D2 receptor binding in patients with TRD. METHODS: Six patients with TRD were treated with bed nucleus of the stria terminalis (BNST)-nucleus accumbens (NAc) DBS were recruited. Ultra-high sensitivity [11C]raclopride dynamic total-body positron emission tomography (PET) imaging was used to assess the brain D2 receptor binding. Each patient underwent a [11C]raclopride PET scan for 60-min under DBS OFF and DBS ON, respectively. A simplified reference tissue model was used to generate parametric images of binding potential (BPND) with the cerebellum as reference tissue. RESULTS: Depression and anxiety symptoms improved after 3-6 months of DBS treatment. Compared with two-day-nonstimulated conditions, one-day BNST-NAc DBS decreased [11C]raclopride BPND in the amygdala (15.9 %, p < 0.01), caudate nucleus (15.4 %, p < 0.0001) and substantia nigra (10.8 %, p < 0.01). LIMITATIONS: This study was limited to the small sample size and lack of a healthy control group. CONCLUSIONS: Chronic BNST-NAc DBS improved depression and anxiety symptoms, and short-term stimulation decreased D2 receptor binding in the amygdala, caudate nucleus, and substantia nigra. The findings suggest that DBS relieves depression and anxiety symptoms possibly by regulating the dopaminergic system.

Electrothermally controlled origami fabricated by 4D printing of continuous fiber-reinforced composites.

Active origami capable of precise deployment control, enabling on-demand modulation of its properties, is highly desirable in multi-scenario and multi-task applications. While 4D printing with shape memory composites holds great promise to realize such active origami, it still faces challenges such as low load-bearing capacity and limited transformable states. Here, we report a fabrication-design-actuation method of precisely controlled electrothermal origami with excellent mechanical performance and spatiotemporal controllability, utilizing 4D printing of continuous fiber-reinforced composites. The incorporation of continuous carbon fibers empowers electrothermal origami with a controllable actuation process via Joule heating, increased actuation force through improved heat conduction, and enhanced mechanical properties as a result of reinforcement. By modeling the multi-physical and highly nonlinear deploying process, we attain precise control over the active origami, allowing it to be reconfigured and locked into any desired configuration by manipulating activation parameters. Furthermore, we showcase the versatility of electrothermal origami by constructing reconfigurable robots, customizable architected materials, and programmable wings, which broadens the practical engineering applications of origami.

Kinetic analysis of cardiac dynamic 18F-Florbetapir PET in healthy volunteers and amyloidosis patients: A pilot study.

Objectives: This study aimed to explore the potential of full dynamic PET kinetic analysis in assessing amyloid binding and perfusion in the cardiac region using 18F-Florbetapir PET, establishing a quantitative approach in the clinical assessment of cardiac amyloidosis disease. Materials & methods: The distribution volume ratios (DVRs) and the relative transport rate constant (R1), were estimated by a pseudo-simplified reference tissue model (pSRTM2) and pseudo-Logan plot (pLogan plot) with kidney reference for the region of interest-based and voxel-wise-based analyses. The parametric images generated using the pSRTM2 and linear regression with spatially constrained (LRSC) algorithm were then evaluated. Semi-quantitative analyses include standardized uptake value ratios at the early phase (SUVREP, 0.5-5 min) and late phase (SUVRLP, 50-60 min) were also calculated. Results: Ten participants [7 healthy controls (HC) and 3 cardiac amyloidosis (CA) subjects] underwent a 60-min dynamic 18F-Florbetapir PET scan. The DVRs estimated from pSRTM2 and Logan plot were significantly increased (HC vs CA; DVRpSRTM2: 0.95 ± 0.11 vs 2.77 ± 0.42, t'(2.13) = 7.39, P = 0.015; DVRLogan: 0.80 ± 0.12 vs 2.90 ± 0.55, t'(2.08) = 6.56, P = 0.020), and R1 were remarkably decreased in CA groups, as compared to HCs (HC vs CA; 1.08 ± 0.37 vs 0.56 ± 0.10, t'(7.63) = 3.38, P = 0.010). The SUVREP and SUVRLP were highly correlated to R1 (r = 0.97, P < 0.001) and DVR(r = 0.99, P < 0.001), respectively. The DVRs in the total myocardium region increased slightly as the size of FWHM increased and became stable at a Gaussian filter ≥6 mm. The secular equilibrium of SUVR was reached at around 50-min p.i. time. Conclusion: The DVR and R1 estimated from cardiac dynamic 18F-Florbetapir PET using pSRTM with kidney pseudo-reference tissue are suggested to quantify cardiac amyloid deposition and relative perfusion, respectively, in amyloidosis patients and healthy controls. We recommend a dual-phase scan: 0.5-5 min and 50-60 min p.i. as the appropriate time window for clinically assessing cardiac amyloidosis and perfusion measurements using 18F-Florbetapir PET.

Epidemiology and clinical features of Skin and Soft Tissue Infections Caused by PVL-Positive and PVL-Negative Methicillin-Resistant Staphylococcus aureus Isolates in inpatients in China: a single-center retrospective 7-year study.

Previous studies have mainly focused on outpatient cases of skin and soft tissue infections (SSTIs), with limited attention to inpatient occurrences. Thus, we aimed to compare the clinical parameters of inpatients with SSTIs, performed genomic characterization, and determined the subtypes of Panton-Valentine leucocidin (PVL) bacteriophages of methicillin-resistant Staphylococcus aureus (MRSA) strains isolated from these patients. We found that PVL-positive patients had shorter hospital stays (mean, 9 vs. 24 days; p < 0.001) and abscess resolution durations (mean, 8 vs. 13 days; p < 0.01). PVL-positive MRSA-induced SSTIs were more frequently associated with abscesses [36/55 (65.5%) vs. 15/124 (12.1%), p < 0.001], with 52.7% undergoing incision and drainage; over 80% of PVL-negative patients received incision, drainage, and antibiotics. In PVL-positive patients receiving empirical antibiotics, anti-staphylococcal agents such as vancomycin and linezolid were administered less frequently (32.7%, 18/55) than in PVL-negative patients (74.2%, 92/124), indicating that patients with PVL-positive SSTIs are more likely to require surgical drainage rather than antimicrobial treatment. We also found that the ST59 lineage was predominant, regardless of PVL status (41.3%, 74/179). Additionally, we investigated the linear structure of the lukSF-PV gene, revealing that major clusters were associated with specific STs, suggesting independent acquisition of PVL by different strain types and indicating that significant diversity was observed even within PVL-positive strains detected in the same facility. Overall, our study provides comprehensive insights into the clinical, genetic, and phage-related aspects of MRSA-induced SSTIs in hospitalized patients and contributes to a more profound understanding of the epidemiology and evolution of these pathogens in the Chinese population.

Direct 4D printing of ceramics driven by hydrogel dehydration.

4D printing technology combines 3D printing and stimulus-responsive materials, enabling construction of complex 3D objects efficiently. However, unlike smart soft materials, 4D printing of ceramics is a great challenge due to the extremely weak deformability of ceramics. Here, we report a feasible and efficient manufacturing and design approach to realize direct 4D printing of ceramics. Photocurable ceramic elastomer slurry and hydrogel precursor are developed for the fabrication of hydrogel-ceramic laminates via multimaterial digital light processing 3D printing. Flat patterned laminates evolve into complex 3D structures driven by hydrogel dehydration, and then turn into pure ceramics after sintering. Considering the dehydration-induced deformation and sintering-induced shape retraction, we develop a theoretical model to calculate the curvatures of bent laminate and sintered ceramic part. Then, we build a design flow for direct 4D printing of various complex ceramic objects. This approach opens a new avenue for the development of ceramic 4D printing technology.

Identification of genes associated with the silk gland size using multi-omics in silkworm (Bombyx mori).

Silk gland size in silkworms (Bombyx mori) affects silk output. However, the molecular mechanisms by which genes regulate silk gland size remain unclear. In this study, silk glands from three pure silkworm strains (A798, A306 and XH) with different silk gland weight phenotypes were compared using transcriptomics and proteomics to identify differentially expressed genes (DEGs) and proteins (DEPs). When comparing A798 to A306 and A798 to XH, 830 and 469 DEGs were up-regulated, respectively. These genes were related to the gene ontology terms, metabolic process, transport activity and biosynthesis process. In addition, 372 and 302 up-regulated differentially expressed proteins were detected in A798 to A306 and A798 to XH, respectively, related to the gene ontology terms, ribosome and protein export, ribosome and polypeptide biosynthesis processes. Moreover, combined transcriptomics, proteomics and weighted correlation network analyses showed that five genes (BGIBMGA002524, BGIBMGA002629, BGIBMGA005659, BGIBMGA005711 and BGIBMGA010889) were significantly associated with the silk gland weight. Reverse Transcription-quantitative real-time Polymerase Chain Reaction (RT-qPCR) and Enzyme linked immunosorbent assay (ELISA) were used to verify the mRNA and protein expression of five genes in the silk glands and tissues of 18 silkworm strains. The results showed that four genes have higher expression levels in heavier silk glands. These genes are associated with glycogen metabolism, fatty acid synthesis and branched chain amino acid metabolism, thus potentially promoting growth and silk protein synthesis. These findings provide valuable insights into the molecular mechanisms underlying the relationship between silk gland weight and silk yield in silkworms.

Cerebral hypometabolism mediates the effect of stroke volume on cognitive impairment in heart failure patients.

AIMS: The present study aimed to phenotype the cerebral structural and glucose metabolic alterations in patients with heart failure (HF) using simultaneous positron emission tomography (PET)/magnetic resonance (MR) and to investigate their relationship to cardiac biomarkers and cognitive performance. METHODS AND RESULTS: Forty-two HF patients caused by ischaemic heart disease (mean age 67.2 ± 10.4, 32 males) and 32 age- and sex-matched healthy volunteers (mean age 61.3 ± 4.8, 18 males) were included in this study. Participants underwent simultaneous cerebral fluorine-18 (18 F) fluorodeoxyglucose PET/MR followed by cardiac MR scan, and neuropsychological scores were obtained to assess cognitive performance. The grey matter volume (GMV) and standardized uptake value ratio (SUVR) were calculated to examine cerebral structural and metabolic alterations. Cardiac biomarkers included cardiac MR parameters and cardiac serum laboratory tests. Mediation analysis was performed to explore the associations among cerebral alterations, cardiac biomarkers, and cognitive performance. HF patients demonstrated notable cognitive impairment compared with normal controls (P < 0.001). Furthermore, HF patients exhibited regional brain hypometabolism in the bilateral calcarine cortex, caudate nucleus, thalamus, hippocampus, precuneus, posterior cingulate cortex, lingual and olfactory cortex, and GMV reduction in bilateral thalamus and hippocampus (cluster level at P < 0.05, Gaussian random field correction). The SUVR of the hypometabolic brain regions was correlated with the Montreal Cognitive Assessment (MoCA) scores (r = 0.55, P = 0.038) and cardiac stroke volume (r = 0.49, P = 0.002). Cerebral hypometabolism played a key role in the relationship between the decreased stroke volume and MoCA scores, with a mediation effect of 33.2%. CONCLUSIONS: HF patients suffered cerebral metabolic and structural alterations in regions associated with cognition. The observed correlation between cardiac stroke volume and cognitive impairment underscored the potential influence of cerebral hypometabolism, suggesting that cerebral hypometabolism due to chronic systemic hypoperfusion may significantly contribute to cognitive impairment in HF patients.

A multi-cycle signal amplification-mediated single quantum dot nanosensor for PIWI-interacting RNA detection.

We construct a single quantum dot-based nanosensor for piRNA detection based on ligation-mediated multi-cycle signal amplification. This nanosensor is homogenous, selective, and sensitive with a detection limit of 0.104 fM. Moreover, it can detect the endogenous piRNA level in different cell lines, and discriminate cancer tissues from normal tissues.

Self-regulated underwater phototaxis of a photoresponsive hydrogel-based phototactic vehicle.

Incorporating a negative feedback loop in a synthetic material to enable complex self-regulative behaviours akin to living organisms remains a design challenge. Here we show that a hydrogel-based vehicle can follow the directions of photonic illumination with directional regulation inside a constraint-free, fluidic space. By manipulating the customized photothermal nanoparticles and the microscale pores in the polymeric matrix, we achieved strong chemomechanical deformation of the soft material. The vehicle swiftly assumes an optimal pose and creates directional flow around itself, which it follows to achieve robust full-space phototaxis. In addition, this phototaxis enables a series of complex underwater locomotions. We demonstrate that this versatility is generated by the synergy of photothermofluidic interactions resulting in closed-loop self-control and fast reconfigurability. The untethered, electronics-free, ambient-powered hydrogel vehicle manoeuvres through obstacles agilely, following illumination cues of moderate intensities, similar to that of natural sunlight.